Footwear - Performance requirements for components for footwear - Uppers (ISO/TR 20879:2007)
60.60 Standard published
Copper and copper alloys - Compendium of compositions and products
90.60 Close of review
Copper and copper alloys - Compendium of compositions and products
60.60 Standard published
Copper and copper alloys - Determination of chromium content - Part 1: Titrimetric method
90.93 Standard confirmed
Copper and copper alloys - Determination of tin content - Part 2: Spectrophotometric method
90.93 Standard confirmed
Copper and copper alloys - Determination of phosphorus content - Spectrophotometric method
60.60 Standard published
Copper and copper alloys - Determination of manganese content - Part 1: Spectrophotometric method
90.93 Standard confirmed
Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS)
90.93 Standard confirmed
Inorganic fertilizers - Determination of the copper content in ammonium nitrate fertilizers of high nitrogen content
60.60 Standard published
Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline
90.93 Standard confirmed
Test method on electromagnetic emissions - Part 1: Electronic control gear for single- and double-capped fluorescent lamps
60.60 Standard published
Railway applications - Communications, signalling and processing systems - ERTMS/ETCS - External signalling for lines equipped with ERTMS/ETCS Level 2
60.60 Standard published
Collection, logistics & Treatment requirements for WEEE - Part 5: Specification for the final treatment of WEEE fractions - Copper and precious metals
60.60 Standard published
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings
90.93 Standard confirmed
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
90.93 Standard confirmed
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
90.92 Standard to be revised
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
60.60 Standard published
Copper and copper alloys - Sheet and strip for building purposes
90.93 Standard confirmed
Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
90.93 Standard confirmed
Copper and copper alloys - Wrought and unwrought forging stock
60.60 Standard published
Copper and copper alloys - Profiles and bars for general purposes
60.60 Standard published
Copper and copper alloys - Hollow rod for free machining purposes
60.60 Standard published
Transportable gas cylinders - Fully wrapped composite cylinders
60.60 Standard published
Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders
90.93 Standard confirmed
Fertilizers - Determination of bulk density (tapped) (ISO 5311:1992 modified)
90.93 Standard confirmed
Copper and copper alloys - Determination of spring bending limit on strip
90.93 Standard confirmed
Chemicals used for treatment of water intended for human consumption - Copper sulfate
90.93 Standard confirmed
Zinc and zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper - Flame atomic absorption spectrometric method
90.93 Standard confirmed
Copper and copper alloys - Seamless, round tubes for general purposes
60.60 Standard published
Copper and copper alloys - Seamless, round copper capillary tubes
90.93 Standard confirmed
Copper and copper alloys - Seamless, round tubes for heat exchangers
90.93 Standard confirmed
Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
90.93 Standard confirmed
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys
90.93 Standard confirmed
Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm
90.93 Standard confirmed
Gullies for buildings - Part 6: Trapped floor gullies with a depth of water seal less than 50 mm
60.60 Standard published
Gullies for buildings - Part 7: Trapped floor gullies with mechanical closure
60.60 Standard published
Gullies for buildings - Part 8: Trapped floor gullies with combined mechanical closure and water seal
60.60 Standard published
Copper and copper alloys - Plumbing fittings - Part 1: Capillary fittings for soldering or brazing to copper tubes
60.60 Standard published
Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information
60.60 Standard published
Copper and copper alloys - Plumbing fittings - Part 2: Compression fittings for use with copper tubes
60.60 Standard published
Copper and copper alloys - Plumbing fittings - Part 3: Compression fittings for use with plastics and multilayer pipes
60.60 Standard published
Copper and copper alloys - Plumbing fittings - Part 4: Threaded fittings
60.60 Standard published
Copper and copper alloys - Plumbing fittings - Part 5: Capillary fittings with short ends for brazing to copper tubes
60.60 Standard published
Copper and copper alloys - Plumbing fittings - Part 6: Push-fit fittings for use with metallic tubes, plastics and multilayer pipes
60.60 Standard published
Copper and copper alloys - Plumbing fittings - Part 7: Press fittings for use with metallic tubes
60.60 Standard published
Copper and copper alloys - Plumbing fittings - Part 8: Press fittings for use with plastics and multilayer pipes
60.60 Standard published
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
60.60 Standard published
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
60.60 Standard published
Copper and copper alloys - Determination of spiral elongation number
90.93 Standard confirmed
Reinforcements - Specification for textile glass chopped strands - Part 1: Designation
90.93 Standard confirmed
Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements
90.93 Standard confirmed
Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements
90.93 Standard confirmed
Solid wood panels - Classification by surface appearance - Part 1: Softwood
90.93 Standard confirmed
Solid wood panels - Classification by surface appearance - Part 2: Hardwood
90.93 Standard confirmed
Copper and copper alloys - Determination of residual stresses in the border area of slit strip
90.93 Standard confirmed
Gas-fired domestic appliances producing hot water - Part 7: Assessment of energy consumption of combination boilers equipped with a passive flue heat recovery device
60.60 Standard published
Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
90.93 Standard confirmed
Copper and copper alloys - Pre-insulated copper tubes with solid covering
90.93 Standard confirmed
Footwear - Test methods for uppers and lining - Water vapour permeability and absorption
90.60 Close of review
Footwear - Test methods for uppers, lining and insocks - Abrasion resistance
90.60 Close of review
Footwear - Test methods for uppers, lining and insocks - Abrasion resistance
90.92 Standard to be revised
Copper and copper alloys - Copper plate, sheet and strip for electrical purposes
90.93 Standard confirmed
Copper and copper alloys - Seamless copper tubes for electrical purposes
60.60 Standard published
Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
60.60 Standard published
Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
90.93 Standard confirmed
Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
60.60 Standard published
Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
90.93 Standard confirmed
Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
60.60 Standard published
Garden equipment - Integrally powered shredders/chippers - Safety
90.20 Standard under periodical review
Garden equipment - Integrally powered shredders/chippers - Safety
60.60 Standard published
Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings -Tests and requirements
90.93 Standard confirmed
Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements
90.60 Close of review
Aluminium and aluminium alloys - Scrap - Part 11: Scrap consisting of aluminium-copper radiators
90.93 Standard confirmed
Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion
90.20 Standard under periodical review
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation
90.93 Standard confirmed
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements
90.93 Standard confirmed
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements
90.93 Standard confirmed
Rough-terrain trucks - Safety requirements and verification - Part 9: Variable-reach trucks equipped with work platforms having a front guard that can be opened
60.60 Standard published
Copper and copper alloys - Determination of impurities in pure copper - ET AAS method
90.93 Standard confirmed
Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method
90.93 Standard confirmed
Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method
90.93 Standard confirmed
Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method
90.93 Standard confirmed
Copper and copper alloys - Determination of antimony content - Part 2: FAAS method
90.93 Standard confirmed
Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS)
90.93 Standard confirmed
Copper and copper alloys - Determination of beryllium content - FAAS method
90.93 Standard confirmed
Copper and copper alloys - Determination of chromium content - Part 2: FAAS method
90.93 Standard confirmed
Copper and copper alloys - Determination of cobalt content - FAAS method
90.93 Standard confirmed
Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method
90.93 Standard confirmed
Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
90.93 Standard confirmed
Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS)
90.93 Standard confirmed
Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
90.93 Standard confirmed
Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS)
90.93 Standard confirmed
Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometric method (FAAS)
90.93 Standard confirmed
Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS)
90.93 Standard confirmed
Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method
90.93 Standard confirmed
Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method
90.93 Standard confirmed
Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES)
90.93 Standard confirmed
Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
90.93 Standard confirmed
Bitumen and bituminous binders - Measurement of density and specific gravity - Capillary-stoppered pyknometer method
90.20 Standard under periodical review
Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test
90.60 Close of review
Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
90.93 Standard confirmed
Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum and lead by ICP-AES
90.60 Close of review
Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
90.93 Standard confirmed
Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS)
90.93 Standard confirmed
Animal feeding stuffs: Methods of sampling and analysis - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese and cobalt after pressure digestion by ICP-AES
90.60 Close of review
Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS)
90.93 Standard confirmed
Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometric method (FAAS)
90.93 Standard confirmed
Copper and copper alloys - Determination of manganese content - Part 2: Flame atomic absorption spectrometric method (FAAS)
90.93 Standard confirmed
Ethanol as a blending component of petrol - Determination of appearance - Visual method
90.20 Standard under periodical review
Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
90.93 Standard confirmed
Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS)
90.93 Standard confirmed
Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS)
90.93 Standard confirmed
Copper and copper alloys - Estimation of average grain size by ultrasound
60.60 Standard published
Sawn timber - Appearance grading of softwoods - Part 1: European spruces, firs, pines and Douglas firs
90.93 Standard confirmed
Sawn timber - Appearance grading of softwoods - Part 1: European spruces, firs, pines, Douglas fir and larches
90.93 Standard confirmed
Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %
90.93 Standard confirmed
Copper and copper alloys - Determination of copper content - Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 %
90.93 Standard confirmed
Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles
90.20 Standard under periodical review
Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
90.93 Standard confirmed
Copper and copper alloys - Plate, sheet, strip and circles for general purposes
90.93 Standard confirmed
Copper and copper alloys - Plate, sheet, strip and circles for general purposes
60.60 Standard published
Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units
90.93 Standard confirmed
Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units
60.60 Standard published
Copper and copper alloys - Strip for springs and connectors
60.60 Standard published
Copper and copper alloys - Declarations of conformity
90.20 Standard under periodical review
Space product assurance - Determination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosion
90.60 Close of review
Space product assurance - Determination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosion
90.60 Close of review
Foodstuffs - Determination of calcium, copper, iron, magnesium, manganese, phosphorus, potassium, sodium, sulfur and zinc by ICP-OES
90.93 Standard confirmed
Fertilizers - Determination of boron, cobalt, copper, iron, manganese, molybdenum and zinc using ICP-AES
90.93 Standard confirmed
Fertilizers - Determination of cobalt, copper, iron, manganese and zinc using flame atomic absorption spectrometry (FAAS)
90.93 Standard confirmed
Copper and copper alloys - Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil
60.60 Standard published
Transportable gas cylinders - Fully wrapped carbon composite cylinders and tubes for hydrogen
60.60 Standard published
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges
90.92 Standard to be revised
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges
60.60 Standard published
Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate
90.93 Standard confirmed
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface
60.60 Standard published
Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface
60.60 Standard published
Aerospace series - Test methods for aluminium alloys products - Part 5: Determination of cladding thickness and copper diffusion of clad semi-finished products
60.60 Standard published
Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard
90.93 Standard confirmed
Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification
60.60 Standard published
Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys
60.60 Standard published
Aerospace series - Elements of electrical and optical connection - Test methods - Part 319: Gastightness of solderless wrapped connections
90.93 Standard confirmed
Aerospace series - Elements of electrical and optical connection - Test methods - Part 424: Stripping force, solderless wrapped connections
90.93 Standard confirmed
Aerospace series - Elements of electrical and optical connection - Test methods - Part 425: Unwrapping capability, solderless wrapped connections
90.93 Standard confirmed
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
90.93 Standard confirmed
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver-plated copper screened (spiral) and jacketed, UV laser printable - Product standard
60.60 Standard published
Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kW
60.60 Standard published
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008: Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C - Product standard
90.93 Standard confirmed
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series - Product standard
90.93 Standard confirmed
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series - Product standard
90.93 Standard confirmed
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 °C - Product standard
60.60 Standard published
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 013: In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260 °C - Product standard
60.60 Standard published
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 014: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard
90.93 Standard confirmed
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
60.60 Standard published
Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Rolled foil
90.93 Standard confirmed
Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Wire
90.93 Standard confirmed
Aerospace series - Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C
90.93 Standard confirmed
Aerospace series - Bonding straps for aircraft - Part 003: Bonding strap assemblies with flat braided conductor copper, tin plated - 65 °C up to 150 °C and copper, nickel plated - 65 °C up to 260 °C - Product standard
60.60 Standard published
Aerospace series - Bonding straps for aircraft - Part 004: Round bonding straps, copper, tin plated -65 °C up to 150 °C and nickel plated -65 °C up to 260 °C - Product Standard
60.60 Standard published
Aerospace series - Bonding straps for aircraft - Part 005: Flat braid conductors copper, tin plated -65 °C up to 150 °C and copper, nickel plated, -65 °C up to 260 °C - Product standard
90.93 Standard confirmed
Aerospace series - Bonding straps for aircraft - Part 006: Round braid copper conductors for bonding straps, tin plated up to 150 °C or nickel plated up to 260 °C - Product standard
90.93 Standard confirmed
Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D ≤ 10 mm
60.60 Standard published
Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances)
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 003: Tin plated copper - Operating temperatures, between -65 °C and 135 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 005: Silver plated copper - Operating temperatures between - 65 °C and 150 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 006: Silver plated copper Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 007: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 008: BP - Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard
90.93 Standard confirmed
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 009: BJ - Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 003: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Single extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 006: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 007: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 009: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 010: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 011: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 012: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
60.60 Standard published
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 013: SX, TC and UC - Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall for equipment only, with jacket and screen (spiral) - UV laser printable - Product standard
90.93 Standard confirmed
Aerospace series - Copper-clad aluminium alloy conductors for electrical cables - Product standard
60.60 Standard published
Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 001: Technical specification
60.60 Standard published
Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 002: General
90.93 Standard confirmed
Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 005: AZ family, single, for use in low pressure atmosphere - Product standard
60.60 Standard published
Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 006: AZA family, single and multicore assembly, for use in low pressure atmosphere - Product standard
60.60 Standard published
Aerospace series - Pipe coupling 8°30' in titanium alloy - Equipped blind ferrules
60.60 Standard published
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C
90.92 Standard to be revised
Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners
60.60 Standard published
Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
90.93 Standard confirmed
Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 18-1: type 4+4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPS ferrules terminated on EN 60793-2-10 category A1a.3a or A1a.3b 50/125 micron multimode fibre
60.60 Standard published
Roofing products from metal sheet - Specification for fully supported roofing products of copper sheet
90.93 Standard confirmed
Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers
90.93 Standard confirmed
Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet
90.93 Standard confirmed
Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
60.60 Standard published
Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
60.60 Standard published
Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
60.60 Standard published
Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
60.60 Standard published
Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
60.60 Standard published
Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
60.60 Standard published
Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
60.60 Standard published
Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
60.60 Standard published
Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
60.60 Standard published
Specifications for particular types of winding wires - Part 32: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
60.60 Standard published
Specifications for particular types of winding wires - Part 33: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
60.60 Standard published
Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
60.60 Standard published
Specifications for particular types of winding wires - Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
60.60 Standard published
Specifications for particular types of winding wires - Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
60.60 Standard published
Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220
60.60 Standard published
Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220
60.60 Standard published
Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220
60.60 Standard published
Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220
60.60 Standard published
Specifications for particular type of winding wires - Part 59: Polyamideimide enameled round copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180
60.60 Standard published
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
60.60 Standard published
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
60.60 Standard published
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
60.60 Standard published
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
60.60 Standard published
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
60.60 Standard published
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
60.60 Standard published
Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor cores
60.60 Standard published
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C - Product standard
60.60 Standard published
Connectors for electronic equipment - Tests and measurement - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections
60.60 Standard published
Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
60.60 Standard published
Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and Humidity
60.60 Standard published
Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind
60.60 Standard published
Classification of environmental conditions - Part 2-3: Environmental conditions appearing in nature - Air pressure
60.60 Standard published
Classification of environmental conditions - Part 2-9: Environmental conditions appearing in nature - Measured shock and vibration data - Storage, transportation and in-use
60.60 Standard published
Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
60.60 Standard published
Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
60.60 Standard published
Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps
60.60 Standard published
Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps
60.60 Standard published
Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
60.60 Standard published
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
60.60 Standard published
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included)
60.60 Standard published
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included)
60.60 Standard published
Non-broadcast video tape recorders - Methods of measurement - Part 5: High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL)
60.60 Standard published
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-721: Test methods for materials for interconnection structures - Measurement of relative permittivity and loss tangent for copper clad laminate at microwave frequency using split post dielectric resonator
60.60 Standard published
Double-capped fluorescent lamps - Safety specifications
60.60 Standard published
Double-capped fluorescent lamps - Safety specifications
60.60 Standard published
Single-capped fluorescent lamps - Safety specifications
60.60 Standard published
Single-capped fluorescent lamps - Safety specifications
60.60 Standard published
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials, clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials, clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-13: Sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate of defined flammability, copper clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core / woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core / woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials)
60.60 Standard published
Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials - Section 1: Copper/Invar/copper
60.60 Standard published
Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
90.20 Standard under periodical review
Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
60.60 Standard published
Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
60.60 Standard published
Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
60.60 Standard published
Ferrite cores - Standard inductance factor for gapped cores and its tolerance
60.60 Standard published
Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications
60.60 Standard published
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders
60.60 Standard published
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders
60.60 Standard published
Methods of measuring performances of electric hair clippers or trimmers for household use
60.60 Standard published
Plywood - Classification by surface appearance - Part 1: General
90.93 Standard confirmed
Plywood - Classification by surface appearance - Part 2: Hardwood
90.93 Standard confirmed
Plywood - Classification by surface appearance - Part 3: Softwood
90.93 Standard confirmed
Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects
90.93 Standard confirmed
Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
90.93 Standard confirmed
Sawn timber - Appearance grading of hardwoods - Part 1: Oak and beech
90.93 Standard confirmed
Sawn timber - Appearance grading of hardwoods - Part 1: Oak and beech
60.60 Standard published
Sawn timber - Appearance grading of hardwoods - Part 2: Poplars
90.93 Standard confirmed
Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
60.60 Standard published
Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass-fibre wound unvarnished and fused, or resin or varnish impregnated, bare or enamelled rectangular copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
60.60 Standard published
Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105
60.60 Standard published
Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120
60.60 Standard published
Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare or enamelled rectangular copper wire, temperature index 155
60.60 Standard published
Specifications for particular types of winding wires - Part 60-2: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
60.60 Standard published
Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
60.60 Standard published
Specifications for particular types of winding wires - Part 62: Polyester glass-fibre wound, silicone resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
60.60 Standard published
Specifications for particular types of winding wires - Part 70-1: Polyester glass-fibre wound unvarnished and fused, bare or enamelled round copper wire, temperature index 155
60.60 Standard published
Specifications for particular types of winding wires - Part 70-2: Polyester glass-fibre wound resin/varnish impregnated, bare or enamelled round copper wire, temperature index 155
60.60 Standard published
Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
60.60 Standard published
Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound silicone resin/varnish impregnated, bare or enamelled round copper wire, temperature index 200
60.60 Standard published
Specifications for particular types of winding wires - Part 80: Polyvinyl acetal enamelled rectangular copper wire, class 120, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 82: Polyesterimide enamelled rectangular copper wire, class 200
60.60 Standard published
Specifications for particular types of winding wires – Part 84: Polyesterimide enamelled round copper wire, class 200
60.60 Standard published
Specifications for particular types of winding wires - Part 93: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 220
60.60 Standard published
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers
60.60 Standard published
Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature
60.60 Standard published
Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature
60.60 Standard published
Classification of environmental conditions - Part 2-6: Environmental conditions appearing in nature - Earthquake vibration and shock
60.60 Standard published
Classification of environmental conditions - Part 2-6: Environmental conditions appearing in nature - Earthquake vibration and shock
60.60 Standard published
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Fauna and flora
60.60 Standard published
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Fauna and flora
60.60 Standard published
Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
60.60 Standard published
Materials for printed boards and other interconnecting structures – Part 2-45: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures – Part 2-46: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures – Part 2-47: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2.0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Connectors for electrical and electronic equipment - Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style
60.60 Standard published
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
60.60 Standard published
Textiles - Tests for colour fastness - Part Z02: Colour fastness to metals in the dyebath: Iron and copper (ISO 105-Z02:1993)
90.93 Standard confirmed
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:2018)
60.60 Standard published
Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012)
60.60 Standard published
Protective clothing for users of hand-held chainsaws - Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018, Corrected version 2019-11)
60.60 Standard published
Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)
60.60 Standard published
Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012)
60.60 Standard published
Glass in building - Laminated glass and laminated safety glass - Part 6: Appearance (ISO 12543-6:2021)
60.60 Standard published
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998)
90.93 Standard confirmed
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998/Cor.1:2002)
60.60 Standard published
Textile floor coverings - Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine (ISO 12951:2020)
60.60 Standard published
Stationary source emissions - Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes - Non-dispersive infrared analyser equipped with catalytic converter (ISO 13199:2012)
60.60 Standard published
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019)
60.60 Standard published
Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 2: Aluminium, magnesium and their alloys and pure copper (ISO 13919-2:2021)
60.60 Standard published
Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009)
60.60 Standard published
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate (ISO 15181-2:2007)
60.60 Standard published
Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying (ISO 15487:2018)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
60.60 Standard published
Metallic and other inorganic coatings - Definitions and conventions concerning appearance (ISO 16348:2003)
90.93 Standard confirmed
Footwear - Test methods for uppers - Resistance to damage on lasting (ISO 17693:2004)
60.60 Standard published
Footwear - Test methods for uppers and lining - Flex resistance (ISO 17694:2016)
60.60 Standard published
Footwear - Test methods for uppers - Deformability (ISO 17695:2004)
60.60 Standard published
Footwear - Test methods for uppers, linings and insocks - Tear strength (ISO 17696:2004)
60.60 Standard published
Footwear - Test methods for uppers, lining and insocks - Seam strength (ISO 17697:2016)
60.60 Standard published
Footwear - Test methods for uppers - Delamination resistance (ISO 17698:2016)
60.60 Standard published
Footwear - Test methods for upper components and insocks - Colour fastness to rubbing and bleeding (ISO 17700:2019)
60.60 Standard published
Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO 17701:2016)
60.60 Standard published
Footwear - Test methods for uppers - Water resistance (ISO 17702:2003)
60.60 Standard published
Footwear - Test methods for uppers - High temperature behaviour (ISO 17703:2003)
60.60 Standard published
Footwear - Test methods for uppers, lining and insocks - Thermal insulation (ISO 17705:2003)
60.60 Standard published
Footwear - Test methods for uppers - Tensile strength and elongation (ISO 17706:2003)
60.60 Standard published
Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2018)
60.60 Standard published
Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification (ISO 17777:2016)
60.60 Standard published
Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test (ISO 196:1978)
90.93 Standard confirmed
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20557-1:2018)
60.60 Standard published
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20557-2:2018)
60.60 Standard published
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
60.60 Standard published
Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods (ISO 20957-5:2016)
60.60 Standard published
Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods (ISO 20957-8:2017)
60.60 Standard published
Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
90.93 Standard confirmed
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012)
60.60 Standard published
Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020)
60.60 Standard published
Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2018)
60.60 Standard published
Copper and copper alloys - Estimation of average grain size (ISO 2624:1990)
90.93 Standard confirmed
Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
60.60 Standard published
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)
90.93 Standard confirmed
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods - Amendment 1 (ISO 3838:2004/Amd 1:2023)
60.60 Standard published
Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016)
60.60 Standard published
Metallic powders - Determination of acid-insoluble content in iron, copper, tin and bronze powders (ISO 4496:2017)
60.60 Standard published
Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2024)
60.60 Standard published
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016)
60.60 Standard published
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
60.60 Standard published
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
60.60 Standard published
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
60.60 Standard published
Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2022)
60.60 Standard published
Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628‑6:2023)
60.60 Standard published
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016)
60.60 Standard published
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012)
60.60 Standard published
Steel and cast iron - Determination of copper content - Flame atomic absorption spectrometric method (ISO 4943:2022)
60.60 Standard published
Steel and cast iron - Determination of copper - 2,2'-Biquinoline spectrophotometric method (ISO 4946:2016)
60.60 Standard published
Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999)
90.93 Standard confirmed
Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999/Cor.1:2001)
60.60 Standard published
Liquefied petroleum gases - Corrosiveness to copper - Copper strip test (ISO 6251:1996)
90.93 Standard confirmed
Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014)
60.60 Standard published
Animal feeding stuffs - Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc - Method using atomic absorption spectrometry (ISO 6869:2000)
90.93 Standard confirmed
Copper-bearing contraceptive intrauterine devices - Requirements and tests (ISO 7439:2023)
60.60 Standard published
Animal and vegatable fats and oils - Determination of copper, iron and nickel contents - Graphite furnace atomic absorption method (ISO 8294:1994)
90.93 Standard confirmed
Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2015)
60.60 Standard published
Textile floor coverings - Assessment of changes in appearance (ISO 9405:2015)
60.60 Standard published
Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:2017)
60.60 Standard published
Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020)
60.60 Standard published
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
90.93 Standard confirmed
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 5: Dust, sand, salt mist
60.60 Standard published
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Earthquake vibration and shock
60.60 Standard published
Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
60.60 Standard published
Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
60.60 Standard published
Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
60.60 Standard published
Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2: General and construction requirements
60.60 Standard published
Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and construction requirements
60.60 Standard published
Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2: General and construction requirements
60.60 Standard published
Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Amendment 1 - Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Amendment 2 - Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Amendment 3 - Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Amendment 4 - Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Amendment 5 - Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Amendment 6 - Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Double-capped fluorescent lamps - Performance specifications
60.60 Standard published
Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures - System voltage of 52 kV and less
60.60 Standard published
Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
60.60 Standard published
Amendment 1 - Methods of measurement for radio transmitters - Part 2: Bandwidth, out-of-band power and power of non-essential oscillations - First supplement: Appendices
60.60 Standard published
Methods of measurement for radio transmitters - Part 3: Wanted and unwanted modulation - First supplement: Appendices
60.60 Standard published
Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
60.60 Standard published
Amendment 1 - Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass-fibre wound unvarnished and fused, or resin or varnish impregnated, bare or enamelled rectangular copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 1: Polyvinyl acetal enamelled round copper wire, class 105
60.60 Standard published
Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
60.60 Standard published
Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
60.60 Standard published
Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105
60.60 Standard published
Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120
60.60 Standard published
Amendment 1 - Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
60.60 Standard published
Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
60.60 Standard published
Amendment 1 - Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
60.60 Standard published
Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
60.60 Standard published
Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
60.60 Standard published
Amendment 1 - Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
60.60 Standard published
Amendment 1 - Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire
60.60 Standard published
Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180
60.60 Standard published
Amendment 1 - Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
60.60 Standard published
Amendment 2 - Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
60.60 Standard published
Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
60.60 Standard published
Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
60.60 Standard published
Specifications for particular types of winding wires - Part 32: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
60.60 Standard published
Specifications for particular types of winding wires - Part 33: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
60.60 Standard published
Amendment 1 - Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
60.60 Standard published
Amendment 1 - Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240
60.60 Standard published
Amendment 1 - Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240
60.60 Standard published
Amendment 1 - Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
60.60 Standard published
Corrigendum 1 - Specifications for particular types of winding wires - Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
60.60 Standard published
Specifications for particular types of winding wires - Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
60.60 Standard published
Specifications for particular types of winding wires - Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
60.60 Standard published
Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220
60.60 Standard published
Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220
60.60 Standard published
Amendment 1 - Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 57: Polyamide-imide enameled round copper wire, class 220
60.60 Standard published
Specifications for particular types of winding wires - Part 58: Polyamide-imide enameled rectangular copper wire, class 220
60.60 Standard published
Specifications for particular types of winding wires - Part 59: Polyamide-imide enamelled round copper wire, class 240
60.60 Standard published
Specifications for particular types of winding wires - Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare or enamelled rectangular copper wire, temperature index 155
60.60 Standard published
Specifications for particular types of winding wires - Part 60-2: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
60.60 Standard published
Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
60.60 Standard published
Specifications for particular types of winding wires - Part 62: Polyester glass-fibre wound, silicone resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
60.60 Standard published
Specifications for particular types of winding wires - Part 70-1: Polyester glass-fibre wound unvarnished and fused, bare or enamelled round copper wire, temperature index 155
60.60 Standard published
Specifications for particular types of winding wires - Part 70-2: Polyester glass-fibre wound resin/varnish impregnated, bare or enamelled round copper wire, temperature index 155
60.60 Standard published
Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
60.60 Standard published
Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound silicone resin/varnish impregnated, bare or enamelled round copper wire, temperature index 200
60.60 Standard published
Specifications for particular types of winding wires - Part 80: Polyvinyl acetal enamelled rectangular copper wire, class 120, with a bonding layer
60.60 Standard published
Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180
60.60 Standard published
Specifications for particular types of winding wires - Part 82: Polyesterimide enamelled rectangular copper wire, class 200
60.60 Standard published
Specifications for particular types of winding wires - Part 84: Polyesterimide enamelled round copper wire, class 200
60.60 Standard published
Specifications for particular types of winding wires – Part 93: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 220
60.60 Standard published
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
60.60 Standard published
Corrigendum 1 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
60.60 Standard published
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
60.60 Standard published
Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers catalogues of transformer and inductor cores
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections
60.60 Standard published
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers
60.60 Standard published
Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
60.60 Standard published
Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity
60.60 Standard published
Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and wind
60.60 Standard published
Classification of environmental conditions - Part 2-3: Environmental conditions appearing in nature - Air pressure
60.60 Standard published
Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature
60.60 Standard published
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 5: Dust, sand, salt mist
60.60 Standard published
Corrigendum 1 - Classification of environmental conditions - Part 2-6: Environmental conditions appearing in nature - Earthquake vibration and shock
60.60 Standard published
Classification of environmental conditions - Part 2-6: Environmental conditions appearing in nature - Earthquake vibration and shock
60.60 Standard published
Classification of environmental conditions - Part 2-7: Environmental conditions appearing in nature - Fauna and flora
60.60 Standard published
Classification of environmental conditions - Part 2-9: Environmental conditions appearing in nature - Measured shock and vibration data - Storage, transportation and in-use
60.60 Standard published
Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers
60.60 Standard published
Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers
60.60 Standard published
Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers
60.60 Standard published
Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
60.60 Standard published
Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
60.60 Standard published
Amendment 1 - Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps
60.60 Standard published
Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps
60.60 Standard published
Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Amendment 1 - Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Amendment 2 - Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Amendment 3 - Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Amendment 4 - Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Amendment 5 - Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Amendment 6 - Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Single-capped fluorescent lamps - Performance specifications
60.60 Standard published
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
60.60 Standard published
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
60.60 Standard published
Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
60.60 Standard published
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
60.60 Standard published
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
60.60 Standard published
Non-broadcast video tape recorders - Methods of measurement - Part 5: High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL)
60.60 Standard published
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-721: Test methods for materials for interconnection structures - Measurement of relative permittivity and loss tangent for copper clad laminate at microwave frequency using a split post dielectric resonator
60.60 Standard published
Amendment 1 - Double-capped fluorescent lamps - Safety specifications
60.60 Standard published
Amendment 2 - Double-capped fluorescent lamps - Safety specifications
60.60 Standard published
Corrigendum 1 - Double-capped fluorescent lamps - Safety specifications
60.60 Standard published
Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals
60.60 Standard published
Coaxial communication cables - Part 1-310: Mechanical test methods - Test for torsion characteristics of copper-clad metals
60.60 Standard published
Amendment 1 - Single-capped fluorescent lamps - Safety specifications
60.60 Standard published
Amendment 2 - Single-capped fluorescent lamps - Safety specifications
60.60 Standard published
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-13: Sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate of defined flammability, copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-31: Reinforced base materials, clad and unclad - Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-32: Reinforced base materials, clad and unclad - Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 3,7 at 1 GHz) and flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-33: Reinforced base materials, clad and unclad - Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-34: Reinforced base materials, clad and unclad - Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 3,7 at 1 GHz) and flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials, clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
60.60 Standard published
Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials)
60.60 Standard published
Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials - Section 1: Copper/invar/copper
60.60 Standard published
Connecting devices - Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units
60.60 Standard published
Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb<sub>3</sub>Sn composite superconducting wires
60.60 Standard published
Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
60.60 Standard published
Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
60.60 Standard published
Ferrite cores - Standard inductance factor for gapped cores and its tolerance
60.60 Standard published
Corrigendum 1 - Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications
60.60 Standard published
Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications
60.60 Standard published
Interpretation sheet 1 - Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications
60.60 Standard published
Corrigendum 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders
60.60 Standard published
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders
60.60 Standard published
Methods of measuring performances of electric hair clippers or trimmers for household use
60.60 Standard published
Residual current operated circuit-breakers for household and similar use - Part 3-1: Particular requirements for devices with screwless-type terminals for external copper conductors
60.60 Standard published
Residual current operated circuit-breakers for household and similar use - Part 3-3: Specific requirements for devices with screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for use with copper or with aluminium conductors
60.60 Standard published
Semiconductor devices - Stress migration test standard - Part 1: Copper stress migration test standard
60.60 Standard published
Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires
60.60 Standard published
Connectors for electrical and electronic equipment - Part 1: Detail specification for 2-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 (copper LC style)
60.60 Standard published
Railway applications - Fixed installations - Electric traction - Copper and copper alloy catenary wires for overhead contact line systems
60.60 Standard published
Corrigendum 1 - Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide
60.60 Standard published
Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide
60.60 Standard published
Environmental declaration - Part 2: Optical/copper telecom accessories products specific rules
60.60 Standard published
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-301: Test methods for interconnection structures (printed boards) - Appearance inspection method for plated surfaces on PWB
60.60 Standard published
Carbonaceous materials for the production of aluminium — Green coke and calcined coke for electrodes — Determination of bulk density (tapped)
90.20 Standard under periodical review
Copper, lead, zinc and nickel concentrates — Determination of mass loss of bulk material on drying
90.93 Standard confirmed
Copper sulfide concentrates — Determination of copper content — Titrimetric methods
90.93 Standard confirmed
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 7: CMMs equipped with imaging probing systems
90.93 Standard confirmed
Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester
90.92 Standard to be revised
Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method
90.93 Standard confirmed
Copper sulfide concentrates — Determination of copper — Electrogravimetric method
90.93 Standard confirmed
Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems
90.93 Standard confirmed
Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems — Amendment 1: Annexes K, L, M
60.60 Standard published
Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems — Technical Corrigendum 1
60.60 Standard published
Textiles — Tests for colour fastness — Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
90.93 Standard confirmed
Cork stoppers — Characterization of a low-in-germs stopper, through the enumeration of colony-forming units of yeasts, moulds and bacteria, capable of both being extracted and growing in alcoholic medium
90.93 Standard confirmed
Pepper and pepper oleoresins — Determination of piperine content — Method using high-performance liquid chromatography
90.93 Standard confirmed
Prefilled syringes — Part 2: Plunger stoppers for dental local anaesthetic cartridges
90.93 Standard confirmed
Prefilled syringes — Part 5: Plunger stoppers for injectables
90.92 Standard to be revised
Soil quality — Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc — Flame and electrothermal atomic absorption spectrometric methods
90.93 Standard confirmed
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
60.60 Standard published
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
60.60 Standard published
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners — Amendment 1
60.60 Standard published
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners
60.60 Standard published
Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners — Amendment 1
60.60 Standard published
Gas cylinders — Refillable composite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
90.93 Standard confirmed
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 3: Copper refinery slag
90.93 Standard confirmed
Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers
90.93 Standard confirmed
Peppercorns (Piper nigrum L.) in brine — Specification and test methods
90.60 Close of review
Copper-bearing intrauterine contraceptive devices — Guidance on the design, execution, analysis and interpretation of clinical studies
90.93 Standard confirmed
Ships and marine technology — Large yachts — Measurement and assessment of the visual appearance of coatings
90.92 Standard to be revised
Protective clothing for users of hand-held chainsaws — Part 6: Performance requirements and test methods for upper body protectors
90.60 Close of review
Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies
90.93 Standard confirmed
Milling cutters — Designation — Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
90.60 Close of review
Building and civil engineering sealants — Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
60.60 Standard published
Copper, lead, zinc and nickel concentrates — Guidelines for the inspection of mechanical sampling systems
90.93 Standard confirmed
Copper, lead, zinc and nickel concentrates — Sampling of slurries
90.93 Standard confirmed
Hardmetals — Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders — Flame atomic absorption spectrometric method
90.93 Standard confirmed
Copper and copper alloys — Code of designation — Part 1: Designation of materials
90.93 Standard confirmed
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 1: General
90.92 Standard to be revised
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 3: Clothing
90.92 Standard to be revised
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 4: Gloves
90.92 Standard to be revised
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets
90.92 Standard to be revised
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 6: Footwear
90.92 Standard to be revised
PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 9: Fire hoods
90.92 Standard to be revised
Small craft — Hull construction and scantlings — Part 9: Sailing craft appendages
90.92 Standard to be revised
Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
90.93 Standard confirmed
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance
60.60 Standard published
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 12: Rigid fuel line in copper and its alloys
60.60 Standard published
Copper, lead and zinc sulfide concentrates — Determination of transportable moisture limits — Flow-table method
60.60 Standard published
Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content
60.60 Standard published
Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling
90.92 Standard to be revised
Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques
90.93 Standard confirmed
Paper, board, pulps and cellulose nanomaterials — Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium
60.60 Standard published
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change
90.93 Standard confirmed
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change — Technical Corrigendum 1
60.60 Standard published
Textile floor coverings — Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine
60.60 Standard published
Stationary source emissions — Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes — Non-dispersive infrared analyser equipped with catalytic converter
90.93 Standard confirmed
Copper, lead, zinc and nickel concentrates — Experimental methods for checking the bias of sampling
90.93 Standard confirmed
Prosthetics and orthotics — Classification and description of prosthetic components — Part 3: Description of upper limb prosthetic components
90.93 Standard confirmed
Road vehicles — Hydraulic braking systems — Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
90.93 Standard confirmed
Copper, lead, zinc and nickel sulfide concentrates — Determination of mass of contained metal in a lot
90.93 Standard confirmed
Copper concentrates — Determination of mercury content — Cold vapour atomic absorption spectrometric method
60.60 Standard published
Copper, lead, zinc and nickel sulfide concentrates — Determination of arsenic — Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method
90.93 Standard confirmed
Copper, lead, zinc and nickel sulfide concentrates — Determination of arsenic — Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method
90.93 Standard confirmed
Ships and marine technology — Ship's mooring and towing fittings — Universal fairleads with upper roller
60.60 Standard published
Ships and marine technology — Ship's mooring and towing fittings — Universal fairleads without upper roller
60.60 Standard published
Aerospace — Wire, aluminium alloy and copper-clad aluminium conductors — General performance requirements
90.93 Standard confirmed
Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs
60.60 Standard published
Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 2: Aluminium, magnesium and their alloys and pure copper
60.60 Standard published
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use
90.92 Standard to be revised
Metallic powders, excluding hardmetals — Method for testing copper-base infiltrating powders
90.93 Standard confirmed
Manipulating industrial robots — Object handling with grasp-type grippers — Vocabulary and presentation of characteristics
90.93 Standard confirmed
Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
90.92 Standard to be revised
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary
90.60 Close of review
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 2: Evaluation of vibration
90.20 Standard under periodical review
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 3: Evaluation of stability margin
90.93 Standard confirmed
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 4: Technical guidelines
90.93 Standard confirmed
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 5: Touch-down bearings
60.60 Standard published
Plastics — Reinforcement fibres — Chopped strands — Determination of bulk density
90.93 Standard confirmed
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate
90.93 Standard confirmed
Textiles — Method for assessing appearance of apparel and other textile end products after domestic washing and drying
90.92 Standard to be revised
Wrought and cast copper alloys — Determination of copper content — Electrolytic method
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 6: Arc and gas welding of copper and its alloys
90.93 Standard confirmed
Copper and nickel sulfide ores and concentrates — Determination of total chlorine content — Alkaline fusion and potentiometric titration method
60.60 Standard published
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
90.93 Standard confirmed
Metallic and other inorganic coatings — Definitions and conventions concerning appearance
90.93 Standard confirmed
Cork — Cork stoppers for still wines — Mechanical and physical specifications
90.93 Standard confirmed
Cubic boron nitride inserts, tipped or solid — Dimensions, types
90.93 Standard confirmed
Textiles — Test method for assessing the matting appearance of napped fabrics after cleansing
90.92 Standard to be revised
Metallic and other inorganic coatings — Autocatalytic nickel over autocatalytic copper for electromagnetic shielding
90.60 Close of review
Footwear — Test methods for uppers — Resistance to damage on lasting
90.20 Standard under periodical review
Footwear — Test methods for uppers and lining — Flex resistance
90.93 Standard confirmed
Footwear — Test methods for uppers — Deformability
90.20 Standard under periodical review
Footwear — Test methods for uppers, linings and insocks — Tear strength
90.20 Standard under periodical review
Footwear — Test methods for uppers, lining and insocks — Seam strength
90.93 Standard confirmed
Footwear — Test methods for uppers — Delamination resistance
90.93 Standard confirmed
Footwear — Test methods for uppers and lining — Water vapour permeability and absorption
90.20 Standard under periodical review
Footwear — Test methods for upper components and insocks — Colour fastness to rubbing and bleeding
60.60 Standard published
Footwear — Test methods for uppers, lining and insocks — Colour migration
90.93 Standard confirmed
Footwear — Test methods for uppers — High temperature behaviour
90.93 Standard confirmed
Footwear — Test methods for uppers, linings and insocks — Abrasion resistance
90.20 Standard under periodical review
Footwear — Test methods for uppers, lining and insocks — Thermal insulation
90.93 Standard confirmed
Footwear — Test methods for uppers — Tensile strength and elongation
90.93 Standard confirmed
PPE ensembles for firefighters undertaking hazardous materials response activities — Part 1: Gas-tight, vapour-protective ensembles for emergency response teams ("type 1")
90.93 Standard confirmed
Cork — Cork stoppers for still wine — Sampling plan for the quality control of cork stoppers
90.93 Standard confirmed
Welding consumables — Covered electrodes for manual metal arc welding of copper and copper alloys — Classification
90.93 Standard confirmed
Paper, board and pulps — Determination of total magnesium, total calcium, total manganese, total iron and total copper
90.93 Standard confirmed
Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 1: Sampling of cast unwrought products
90.93 Standard confirmed
Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings
90.93 Standard confirmed
Copper alloys — Determination of iron content — 1,10- Phenanthroline spectrophotometric method
90.93 Standard confirmed
Nuclear fuel technology — Tank calibration and volume determination for nuclear materials accountancy — Part 4: Accurate determination of liquid height in accountancy tanks equipped with dip tubes, slow bubbling rate
90.93 Standard confirmed
Nuclear fuel technology — Tank calibration and volume determination for nuclear materials accountancy — Part 5: Accurate determination of liquid height in accountancy tanks equipped with dip tubes, fast bubbling rate
90.93 Standard confirmed
Nuclear fuel technology — Tank calibration and volume determination for nuclear materials accountancy — Part 6: Accurate in-tank determination of liquid density in accountancy tanks equipped with dip tubes
90.93 Standard confirmed
PPE ensembles for firefighters undertaking specific rescue activities — Part 1: General
90.93 Standard confirmed
PPE ensembles for firefighters undertaking specific rescue activities — Part 3: Clothing
90.92 Standard to be revised
PPE ensembles for firefighters undertaking specific rescue activities — Part 4: Gloves
90.60 Close of review
PPE ensembles for firefighters undertaking specific rescue activities — Part 4: Gloves — Amendment 1
60.60 Standard published
PPE ensembles for firefighters undertaking specific rescue activities — Part 5: Helmet
90.60 Close of review
PPE ensembles for firefighters undertaking specific rescue activities — Part 6: Footwear
90.92 Standard to be revised
Aluminium oxide primarily used for the production of aluminium — Method for the determination of tapped and untapped density
90.93 Standard confirmed
Wrought copper and copper alloys — Detection of residual stress — Mercury(I) nitrate test
90.93 Standard confirmed
Road vehicles — Automotive cables — Part 3: Dimensions and requirements for 30 V a.c. or 60 V d.c. single core copper conductor cables
90.20 Standard under periodical review
Road vehicles — Automotive cables — Part 5: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core copper conductor cables
90.20 Standard under periodical review
Road vehicles — Automotive cables — Part 7: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core copper conductor cables
90.20 Standard under periodical review
Road vehicles — Automotive cables — Part 9: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed, screened or unscreened multi or single core copper conductor cables
90.20 Standard under periodical review
Copper and copper alloys — Terms and definitions — Part 1: Materials
90.93 Standard confirmed
Copper and copper alloys — Terms and definitions — Part 2: Unwrought products (Refinery shapes)
90.93 Standard confirmed
Copper and copper alloys — Terms and definitions — Part 3: Wrought products
90.93 Standard confirmed
Copper and copper alloys — Terms and definitions — Part 4: Castings
90.93 Standard confirmed
Copper and copper alloys — Terms and definitions — Part 5: Methods of processing and treatment
90.93 Standard confirmed
Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 1: Flame atomic absorption spectrometric method
60.60 Standard published
Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method
60.60 Standard published
Capillary solder fittings for copper tubes — Assembly dimensions and tests
90.93 Standard confirmed
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 1: Designation system and basis for specifications
90.60 Close of review
Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
90.60 Close of review
Ships and marine technology — Hopper dredger supervisory and control systems
60.60 Standard published
Textile machinery — Hopper feeders for cotton spinning — Vocabulary and principles of construction
90.93 Standard confirmed
Cork stoppers — Determination of releasable 2,4,6-trichloroanisol (TCA)
60.60 Standard published
Cigarettes — Determination of nicotine-free dry particulate matter and nicotine in sidestream smoke — Method using a routine analytical linear smoking machine equipped with a fishtail chimney
90.93 Standard confirmed
Cigarettes — Determination of carbon monoxide in sidestream smoke — Method using a routine analytical linear smoking machine equipped with a fishtail chimney
90.93 Standard confirmed
Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test
90.93 Standard confirmed
Leather — Crust full chrome upper leather — Specifications and test methods
60.60 Standard published
Leather — Full chrome upper leather — Specification and test methods
90.20 Standard under periodical review
Stationary training equipment — Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods
90.93 Standard confirmed
Stationary training equipment — Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods
90.93 Standard confirmed
Cork stoppers — Determination of oxidizing residues — Iodometric titration method
90.93 Standard confirmed
Equipment for crop protection — Induction hoppers — Part 1: Test methods
90.60 Close of review
Equipment for crop protection — Induction hoppers — Part 2: General requirements and performance limits
90.60 Close of review
Petroleum products — Corrosiveness to copper — Copper strip test
90.93 Standard confirmed
Heavy commercial vehicles — Vehicle stability during tipper body operation — Tilt-table test method
60.60 Standard published
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic powders — Part 2: Untapped density
90.92 Standard to be revised
Ferronickels — Determination of phosphorus, manganese, chromium, copper and cobalt contents — Inductively coupled plasma optical emission spectrometric method
60.60 Standard published
Cleaning, inspection and repair of firefighters' personal protective equipment (PPE)
90.92 Standard to be revised
Corrosion of metals and alloys — Rating method by appearance of rust and stains of atmospheric corrosion for stainless steels
60.60 Standard published
Ships and marine technology — Adjustable roller-type chain stoppers
60.60 Standard published
Plywood — Classification by surface appearance — Part 1: General
60.60 Standard published
Plywood — Classification by surface appearance — Part 2: Hardwood
60.60 Standard published
Plywood — Classification by surface appearance — Part 3: Softwood
90.60 Close of review
Plywood — Classification by surface appearance — Part 4: Palm-plywood
90.60 Close of review
Footwear — Test methods for uppers — Resistance to rubbing using a rubber strip
60.60 Standard published
Welding consumables — Solid wires and rods for fusion welding of copper and copper alloys — Classification
90.93 Standard confirmed
Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene
90.93 Standard confirmed
Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications
90.93 Standard confirmed
Aircraft ground equipment — Upper deck catering vehicle — Functional requirements
90.93 Standard confirmed
Aircraft ground equipment — Upper deck loader — Functional requirements
90.20 Standard under periodical review
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4: Straight grinders — Amendment 1: Cupped wire brushes
60.60 Standard published
Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 1: Vehicles and child restraint systems equipped with ISOFIX anchorages and attachments
90.92 Standard to be revised
Rubber and plastics hoses — Methods of exposure to laboratory light sources — Determination of changes in colour, appearance and other physical properties
90.93 Standard confirmed
Copper and copper alloys — Determination of arsenic — Photometric method
90.93 Standard confirmed
T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
90.93 Standard confirmed
Copper and zinc sulfide concentrates — Determination of thallium — Acid digestion and inductively coupled plasma-mass spectrometry
60.60 Standard published
Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters
60.60 Standard published
Plain bearings — Wrapped bushes — Part 3: Lubrication holes, grooves and indentations
90.93 Standard confirmed
Plain bearings — Wrapped bushes — Part 5: Checking the outside diameter
60.60 Standard published
Plain bearings — Wrapped bushes — Part 6: Checking the inside diameter
60.60 Standard published
Plain bearings — Wrapped bushes — Part 7: Measurement of wall thickness of thin-walled bushes
60.60 Standard published
Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression
60.60 Standard published
Machine tools — Symbols for indications appearing on machine tools
90.93 Standard confirmed
Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
90.93 Standard confirmed
Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods — Amendment 1
60.60 Standard published
Aluminium and aluminium alloys — Determination of copper — Atomic absorption spectrophotometric method
90.60 Close of review
Road vehicles — Hydraulic braking systems — Simple flare pipes, tapped holes, male fittings and hose end fittings
90.93 Standard confirmed
Road vehicles — Pneumatic braking systems — Part 1: Pipes, male fittings and tapped holes with facial sealing surface
90.93 Standard confirmed
Plain bearings — Copper alloys — Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings
60.60 Standard published
Plain bearings — Copper alloys — Part 2: Wrought copper alloys for solid plain bearings
60.60 Standard published
Metallic powders — Determination of acid-insoluble content in iron, copper, tin and bronze powders
90.93 Standard confirmed
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion
60.60 Standard published
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system
90.93 Standard confirmed
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
90.93 Standard confirmed
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
90.92 Standard to be revised
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking
90.93 Standard confirmed
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
60.60 Standard published
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
60.60 Standard published
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method
90.93 Standard confirmed
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
90.93 Standard confirmed
Cork — Cylindrical stoppers for sparkling wines and gasified wines — Characteristics
90.93 Standard confirmed
Wrought copper and copper alloy products — Selection and preparation of specimens and test pieces for mechanical testing
90.93 Standard confirmed
Copper and copper alloys — Determination of phosphorus content — Molybdovanadate spectrometric method
90.93 Standard confirmed
Copper alloys — Determination of nickel content — Gravimetric method
90.93 Standard confirmed
Copper and copper alloys — Determination of chromium content — Flame atomic absorption spectrometric method
90.93 Standard confirmed
Copper alloys — Determination of iron content — Na2EDTA titrimetric method
90.93 Standard confirmed
Copper alloys — Determination of lead content — Flame atomic absorption spectrometric method
90.93 Standard confirmed
Ships and marine technology — Winches for trailing suction hopper dredger
60.60 Standard published
Steel and cast iron — Determination of copper content — Flame atomic absorption spectrometric method
60.60 Standard published
Steel and cast iron — Determination of copper — 2,2'-Biquinoline spectrophotometric method
90.93 Standard confirmed
Plastics — Determination of specific aerobic biodegradation rate of solid plastic materials and disappearance time (DT50) under mesophilic laboratory test conditions
60.60 Standard published
Pulps — Determination of drainability — Part 1: Schopper-Riegler method
90.93 Standard confirmed
Pulps — Determination of drainability — Part 1: Schopper-Riegler method — Technical Corrigendum 1
60.60 Standard published
Fertilizers — Determination of bulk density (tapped)
90.20 Standard under periodical review
Iron ores — Determination of copper — Part 1: 2,2'-Biquinolyl spectrophotometric method
90.93 Standard confirmed
Iron ores — Determination of copper — Part 2: Flame atomic absorption spectrometric method
90.93 Standard confirmed
Dried peppermint (Mentha piperita Linnaeus) — Specification
90.92 Standard to be revised
Black pepper and white pepper, whole or ground — Determination of piperine content — Spectrophotometric method
90.60 Close of review
Milk and milk products — Determination of copper content — Photometric method (Reference method)
90.93 Standard confirmed
Pliers and nippers — Pliers for gripping and manipulating — Dimensions and test values
90.60 Close of review
Pliers and nippers — Engineer's and Lineman's pliers — Dimensions and test values
60.60 Standard published
Pliers and nippers — Lever assisted side cutting pliers, end and diagonal cutting nippers — Dimensions and test values
90.93 Standard confirmed
Pliers and nippers — End cutting nippers — Dimensions and test values
90.93 Standard confirmed
Pliers and nippers — Diagonal cutting nippers — Dimensions and test values
90.93 Standard confirmed
Manganese ores and concentrates — Determination of aluminium, copper, lead and zinc contents — Flame atomic absorption spectrometric method
90.93 Standard confirmed
Copper and copper alloys — Determination of antimony content — Rhodamine B spectrometric method
90.93 Standard confirmed
Copper and copper alloys — Determination of bismuth content — Diethyldithiocarbamate spectrometric method
90.93 Standard confirmed
Copper alloys — Determination of cadmium content — Flame atomic absorption spectrometric method
90.93 Standard confirmed
Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content
60.60 Standard published
Liquefied petroleum gases — Corrosiveness to copper — Copper strip test
90.60 Close of review
Nickel — Determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc contents — Flame atomic absorption spectrometric method
90.93 Standard confirmed
Copper alloys — Determination of chromium content — Titrimetric method
90.93 Standard confirmed
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method
90.93 Standard confirmed
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria
90.93 Standard confirmed
Animal feeding stuffs — Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc — Method using atomic absorption spectrometry
90.93 Standard confirmed
Metallic flanges — Part 3: Copper alloy and composite flanges
90.93 Standard confirmed
Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 1: General
90.20 Standard under periodical review
Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 2: Cavitation erosion and its countermeasures
90.20 Standard under periodical review
Copper and copper alloys — Determination of sulfur content — Combustion titrimetric method
90.93 Standard confirmed
Copper-bearing contraceptive intrauterine devices — Requirements and tests
60.60 Standard published
Machinery for forestry — Machine-fed woody biomass reduction chippers, grinders, and shredders — Vocabulary
60.60 Standard published
Nickel alloys — Flame atomic absorption spectrometric analysis — Part 1: Determination of cobalt, chromium, copper, iron and manganese
90.93 Standard confirmed
Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 2: Upper deck doors
90.92 Standard to be revised
Textiles — Test method for assessing the smoothness appearance of fabrics after cleansing
90.93 Standard confirmed
Textiles — Test method for assessing the appearance of creases in fabrics after cleansing
90.93 Standard confirmed
Textiles — Test method for assessing the smoothness appearance of seams in fabrics after cleansing
90.93 Standard confirmed
Magnesium and magnesium alloys — Determination of copper content — Oxalyldihydrazide photometric method
90.60 Close of review
Aluminium and aluminium alloys — Determination of copper content — Oxalyldihydrazide photometric method
90.60 Close of review
Fruits, vegetables and derived products — Determination of copper content — Method using flame atomic absorption spectrometry
90.93 Standard confirmed
Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods
90.93 Standard confirmed
Animal and vegetable fats and oils — Determination of copper, iron and nickel contents — Graphite furnace atomic absorption method
90.93 Standard confirmed
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of cemented or wrapped joints
60.60 Standard published
Prosthetics and orthotics — Limb deficiencies — Part 3: Method of describing upper limb amputation stumps
90.92 Standard to be revised
Information processing systems — Open Systems Interconnection — File Transfer, Access and Management — Part 1: General introduction — Amendment 2: Overlapped access
60.60 Standard published
Information processing systems — Open Systems Interconnection — File Transfer, Access and Management — Part 2: Virtual Filestore Definition — Amendment 2: Overlapped access
60.60 Standard published
Information processing systems — Open Systems Interconnection — File Transfer, Access and Management — Part 3: File Service Definition — Amendment 2: Overlapped access
60.60 Standard published
Information processing systems — Open Systems Interconnection — File Transfer, Access and Management — Part 4: File Protocol Specification — Amendment 2: Overlapped access
60.60 Standard published
Earth-moving machinery — Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom
90.93 Standard confirmed
Pliers and nippers — Multiple slip joint pliers — Dimensions and test values
60.60 Standard published
Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints
90.93 Standard confirmed
Pliers and nippers — Construction worker's pincers — Dimensions and test values
90.93 Standard confirmed
Pliers and nippers — Carpenter's pincers — Dimensions and test values
90.93 Standard confirmed
Pliers and nippers — Slip joint pliers — Dimensions and test values
60.60 Standard published
Textile floor coverings — Assessment of changes in appearance
90.92 Standard to be revised
Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1
90.20 Standard under periodical review
Soft soldering fluxes — Test methods — Part 15: Copper corrosion test
90.93 Standard confirmed
Soft soldering fluxes — Test methods — Part 5: Copper mirror test
60.60 Standard published
Pepper (Piper nigrum L.), whole or ground — Specification — Part 1: Black pepper
90.92 Standard to be revised
Pepper (Piper nigrum L.), whole or ground — Specification — Part 2: White pepper
90.92 Standard to be revised
Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method
90.93 Standard confirmed
Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys
90.92 Standard to be revised
Pliers and nippers for electronics — Single-purpose nippers — Cutting nippers
90.60 Close of review
ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
90.92 Standard to be revised
Pliers and nippers for electronics — Single-purpose pliers — Pliers for gripping and manipulating
90.60 Close of review
Pliers and nippers for electronics — General technical requirements
90.60 Close of review
Cylindrical cork stoppers — Physical tests — Part 1: Determination of dimensions
90.93 Standard confirmed
Cylindrical cork stoppers — Physical tests — Part 2: Determination of mass and apparent density for agglomerated cork stoppers
90.93 Standard confirmed
Cylindrical cork stoppers — Physical tests — Part 3: Determination of humidity content
90.93 Standard confirmed
Cylindrical cork stoppers — Physical tests — Part 4: Determination of dimensional recovery after compression
90.93 Standard confirmed
Cylindrical cork stoppers — Physical tests — Part 5: Determination of extraction force
90.93 Standard confirmed
Cylindrical cork stoppers — Physical tests — Part 6: Determination of liquid tightness
90.93 Standard confirmed
Cylindrical cork stoppers — Physical tests — Part 7: Determination of dust content
90.93 Standard confirmed
Cylindrical cork stoppers — Physical tests — Part 8: Determination of capillarity
60.60 Standard published
Textiles — Evaluation of the wrinkle recovery of fabrics — Appearance method
60.60 Standard published
Motorcycles — Measurement of variation of dipped beam inclination as a function of load
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Structure of management information: Managed objects for supporting upper layers — Part 8:
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Upper layers security model
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Generic upper layers security: Overview, models and notation
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Generic upper layers security: Security Exchange Service Element (SESE) service definition
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Generic upper layers security: Security Exchange Service Element (SESE) protocol specification
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Generic upper layers security: Protecting transfer syntax specification
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Generic upper layers security: Security Exchange Service Element (SESE) Protocol Implementation Conformance Statement (PICS) proforma
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Generic upper layers security: Protecting transfer syntax Protocol Implementation Conformance Statement (PICS) proforma
90.93 Standard confirmed
Information technology — Fibre Channel — Part 114: 100 MB/s Balanced copper physical interface (FC-100-DF-EL-S)
90.93 Standard confirmed
Information technology - Fibre Channel - Part 114: 100 MB/s balanced copper physical interface (FC-100-DF-EL-S)
60.60 Standard published
Information technology — Security techniques — Digital signatures with appendix — Part 1: General
90.93 Standard confirmed
Information technology — Security techniques — Digital signatures with appendix — Part 2: Integer factorization based mechanisms
90.93 Standard confirmed
Information technology — Security techniques — Digital signatures with appendix — Part 2: Integer factorization based mechanisms — Technical Corrigendum 1: To ISO/IEC 14888-2:2008
60.60 Standard published
IT Security techniques — Digital signatures with appendix — Part 3: Discrete logarithm based mechanisms
90.93 Standard confirmed
Information technology — Specification of low power wireless mesh network over channel-hopped TDMA links
90.60 Close of review
Information technology — Top-level ontologies (TLO) — Part 4: TUpper
60.60 Standard published
Information technology — Upper level ontology for smart city indicators
60.60 Standard published
Information technology — Fibre Channel — Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2 (FC-AE-1553)
60.60 Standard published
Information technology - Fibre channel - Part 312: Avionics environment upper layer protocol (FC-AE 1553)
60.60 Standard published
Copper, lead and zinc sulfide concentrates — Step-by-step procedure for the testing of static scales
90.92 Standard to be revised
Textiles — Three-dimensional measuring apparatus for fabric appearance
90.93 Standard confirmed
Best practices on the selection and use of personal protective equipment (PPE) designed to provide protection for firefighters
60.60 Standard published
Industrial automation systems and integration — Product data representation and exchange — Part 1001: Application module: Appearance assignment
90.92 Standard to be revised
Industrial automation systems and integration — Product data representation and exchange — Part 1003: Application module: Curve appearance
90.93 Standard confirmed
