2006/42/EC

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

This web page provides you with updated information on the European standard supporting the implementation of EU Directives and regulations. It provides, on one hand the information corresponding to the real-time status of the standards provided by CEN and CENELEC and, on the other hand, provides updated information about the status of the standards in support of the European legislation. It may happen that a standard is withdrawn by the standardisation body and remains applicable in the context of the EU legislation, unless the reference is withdrawn from the official journal.

"DISCLAIMER: This is an informative page, providing added value information on standards. Information may evolve and change subject to the publication of other legislative texts. This page has no legal validity and only informative value. Genorma.com informs its users that users of this platform are responsible for deciding the version of the standard that is applicable to their products, and not Genorma.com. As a consequence, Genorma.com users are encouraged to check the latest versions of the legal text accessible through the EUR-LEX website or the Website of the European Commission"

907 - Draft standards 1033 - View all published standards related to this directive 514 - Withdrawn standards

Harmonised Standards or standards supporting the application of the EU legislation

Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Centrifuges - Common safety requirements

90.93 Standard confirmed

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2019)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020)

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Safety of machinery - Integral lighting of machines

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level - Amendment 1 (ISO 11203:1995/Amd 1:2020)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Plastics and rubber machines - Two-roll mills - Safety requirements

90.92 Standard to be revised

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Agricultural machinery - Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified)

90.93 Standard confirmed

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Food processing machinery - Intermediate provers - Safety and hygiene requirements

90.60 Close of review

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Food processing machinery - Planetary mixers - Safety and hygiene requirements

90.60 Close of review

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Food processing machinery - Moulders - Safety and hygiene requirements

90.60 Close of review

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Screens for laser working places - Safety requirements and testing

90.60 Close of review

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements

90.60 Close of review

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Food processing machinery - Band saw machines - Safety and hygiene requirements

90.60 Close of review

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Food processing machinery - Dough mixers - Safety and hygiene requirements

90.60 Close of review

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts

90.93 Standard confirmed

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009)

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections - Amendment 1 (ISO 11202:2010/Amd 1:2020)

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Safety of industrial trucks - Electrical/electronic requirements

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface-finishing machines

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020)

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles

90.20 Standard under periodical review

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles

99.60 Withdrawal effective

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2021)

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

High-pressure water jet machines - Safety requirements - Part 1: Machines

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading

99.60 Withdrawal effective

C 159 Official journal reference
Jun 5, 2012 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks - Amendment 1 (ISO 3691-1:2011/Amd 1:2020)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks - Amendment 1 (ISO 3691-5:2014/Amd 1:2020)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements (ISO 21904-1:2020)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Food processing machinery - Automatic dough dividers - Safety and hygiene requirements

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic and electro hydraulic control systems

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Woodworking machines - Safety - Part 11: Combined machines (ISO 19085-11:2020)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines

90.93 Standard confirmed

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018, including Corrected version 2019-12)

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Food processing machinery - Slicing machines - Safety and hygiene requirements

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Cranes - Offshore cranes - Part 3: Light offshore cranes

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Cranes - Loader cranes

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks

90.93 Standard confirmed

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers

90.93 Standard confirmed

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Petroleum, petrochemical and natural gas industries - Safety of machineries - Manual elevators

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Road construction machines - Mixing plants for road construction materials - Safety requirements

90.93 Standard confirmed

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Refuse collection vehicles - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017)

99.60 Withdrawal effective

L 270 Official journal reference
Oct 24, 2019 Official journal publication date

Steel wire ropes - Safety - Part 5: Stranded ropes for lifts

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Truck mixers - Safety requirements

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Cranes - Loader cranes

99.60 Withdrawal effective

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020)

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes

90.92 Standard to be revised

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Conveyor belts for general purpose use - Electrical and flammability safety requirements

90.93 Standard confirmed

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018, Corrected version 2019-12)

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Safety of machinery - Instruction handbook - General drafting principles (ISO 20607:2019)

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Safety of machinery - Fire prevention and fire protection (ISO 19353:2019)

60.60 Standard published

L 102/6 Official journal reference
Apr 3, 2020 Official journal publication date

Railway applications - Track - Railbound construction and maintenance machines - Part 4: Technical requirements for running, travelling and working on urban rail

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service stairs and platforms

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012/Amd 1:2017)

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety

99.60 Withdrawal effective

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Agricultural machinery - Trailers - Safety

99.60 Withdrawal effective

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Plating and anodizing lines - Safety requirements

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Agricultural machinery - Slurry tankers - Safety

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 4: High expansion foam generators PN16

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Agricultural machinery - Safety - Part 11: Pick-up balers - Amendment 1 (ISO 4254-11:2010/Amd 1:2020)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Safety of machinery - Two-hand control devices - Principles for design and selection (ISO 13851:2019)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017, Corrected version 2019-03)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Cycles - Electrically power assisted cycles - EPAC Bicycles

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means enclosure guards (ISO 5395-3:2013/Amd 2:2017)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests - Amendment 1: Annex G (Vibration test code - Hand-arm vibration and whole-body vibration) (ISO 5395-1:2013/Amd 1:2017)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Forestry machinery - Safety requirements on radio remote controls

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Forestry machinery - Wood chippers - Safety

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines - Amendment 2 (ISO 11111-2:2005/Amd 2:2016)

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery - Amendment 2 (ISO 11111-7:2005/Amd 2:2016)

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery - Amendment 2 (ISO 11111-6:2005/Amd 2:2016)

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting - Amendment 2 (ISO 11111-5:2005/Amd 2:2016)

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005/Amd 2:2016)

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Powered hand-held hedge trimmers - Safety (ISO 10517:2019)

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 1: OPC, cutting means, pressurized hoses (ISO 5395-2:2013/Amd 1:2016)

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Agricultural machinery and tractors - Safety of highly automated agricultural machines - Principles for design (ISO 18497:2018)

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)

90.60 Close of review

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 1: OPC, Parking brake, ROPS, pressurized hoses, cutting means, grass catcher and test probe (ISO 5395-3:2013/Amd 1:2017, Corrected version 2017-03)

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011/Amd 1:2017)

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018)

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 2: Cutting-means-enclosure guards (ISO 5395-2:2013/Amd 2:2017)

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters

90.20 Standard under periodical review

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005/Amd 2:2016)

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment

90.20 Standard under periodical review

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines

90.93 Standard confirmed

C 350 Official journal reference
Nov 15, 2012 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines

90.93 Standard confirmed

C 350 Official journal reference
Nov 15, 2012 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines

90.92 Standard to be revised

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011)

60.60 Standard published

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011)

60.60 Standard published

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Agricultural machinery - Manure spreaders - Safety

90.93 Standard confirmed

C 110 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001/Amd 2:2014)

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001/Amd 2:2014)

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001/Amd 2:2014)

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 2 (ISO 9902-4:2001/Amd 2:2014)

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 2 (ISO 9902-3:2001/Amd 2:2014)

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery - Amendment 2 (ISO 9902-2:2001/Amd 2:2014)

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Textile machinery - Noise test code - Part 1: Common requirements - Amendment 2 (ISO 9902-1:2001/Amd 2:2014)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors

90.93 Standard confirmed

C 110 Official journal reference
Apr 11, 2014 Official journal publication date

Powered hand-held hedge trimmers - Safety (ISO 10517:2009/Amd 1:2013)

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified)

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified)

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified)

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified)

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles

90.93 Standard confirmed

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges

60.60 Standard published

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles

90.93 Standard confirmed

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

99.60 Withdrawal effective

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011)

99.60 Withdrawal effective

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013)

60.60 Standard published

C 110 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of packaging machines - Part 6: Pallet wrapping machines

90.93 Standard confirmed

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment

90.93 Standard confirmed

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems

90.93 Standard confirmed

C 350 Official journal reference
Nov 15, 2012 Official journal publication date

Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use

90.93 Standard confirmed

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Safety of packaging machines - Part 10: General Requirements

90.92 Standard to be revised

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants

90.93 Standard confirmed

C 159 Official journal reference
Jun 5, 2012 Official journal publication date

Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards

90.93 Standard confirmed

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO 16231-1:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance

90.60 Close of review

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012)

60.60 Standard published

C 350 Official journal reference
Nov 15, 2012 Official journal publication date

Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool (ISO/TS 28923:2007 modified)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Earth-moving machinery - Access systems (ISO 2867:2011)

60.60 Standard published

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)

60.60 Standard published

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders

90.92 Standard to be revised

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs

90.92 Standard to be revised

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements

90.92 Standard to be revised

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)

99.60 Withdrawal effective

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)

99.60 Withdrawal effective

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)

99.60 Withdrawal effective

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)

99.60 Withdrawal effective

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012)

60.60 Standard published

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Food processing machinery - Smokehouses - Safety and hygiene requirements

90.60 Close of review

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Industrial sewing machines - Safety requirements for sewing machines, units and systems - Amendment 1 (ISO 10821:2005/Amd 1:2009, Corrected version 2009-08-01)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011)

99.60 Withdrawal effective

C 214 Official journal reference
Jul 20, 2011 Official journal publication date

Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance

90.20 Standard under periodical review

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Automatic forced draught burners for liquid fuels

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods

90.93 Standard confirmed

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Agricultural machinery - Backhoes - Safety

90.93 Standard confirmed

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines

90.93 Standard confirmed

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Leisure karts - Part 1: Safety requirements and test methods for karts

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Machinery for forestry - General safety requirements (ISO 11850:2011)

60.60 Standard published

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders

90.92 Standard to be revised

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery - Amendment 1 (ISO 11111-7:2005/Amd 1:2009)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery - Amendment 1 (ISO 11111-6:2005/Amd 1:2009)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting - Amendment 1 (ISO 11111-5:2005/Amd 1:2009)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 1 (ISO 11111-4:2005/Amd 1:2009)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 1 (ISO 11111-3:2005/Amd 1:2009)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines - Amendment 1 (ISO 11111-2:2005/Amd 1:2009)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

All terrain vehicles (ATVs - Quads) - Safety requirements and test methods

90.93 Standard confirmed

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking

99.60 Withdrawal effective

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Reciprocating internal combustion engine driven generating sets - Safety

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods

90.60 Close of review

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods

90.60 Close of review

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009)

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009)

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009)

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Footwear manufacturing machines - Footwear moulding machines - Safety requirements

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Lifting bag systems for fire and rescue service use - Safety and performance requirements

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements

90.60 Close of review

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005)

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements - Amendment 1 (ISO 10326-1:1992/Amd 1:2007)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

High pressure water jet machines - Safety requirements - Part 1: Machines

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009)

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Snow grooming equipment - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005)

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005)

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Petrol filling stations - Safety requirements for the construction of submersible pump assemblies

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005)

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005)

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Forestry machinery - Wood chippers - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Noise test code for fastener driving tools - Engineering method

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of woodworking machines - Combined woodworking machines

99.60 Withdrawal effective

C 159 Official journal reference
Jun 5, 2012 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws

99.60 Withdrawal effective

C 110 Official journal reference
Apr 11, 2014 Official journal publication date

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks

90.93 Standard confirmed

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Spray booths for organic coating material - Safety requirements

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019)

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Mining - Mobile machines working underground - Machine safety (ISO 19296:2018)

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Safety of woodworking machines - Chip and dust extraction systems for indoor installation - Safety requirements

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Plastics and rubber machines - Calenders - Safety requirements

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2021)

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems - Amendment 1 (ISO 19225:2017/Amd 1:2019)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Crane safety - General design - Part 2: Load actions

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Earth-moving machinery - Safety - Part 1: General requirements

99.60 Withdrawal effective

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)

99.60 Withdrawal effective

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013)

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles

99.60 Withdrawal effective

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Transport platforms

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010/Amd 1:2015)

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements

90.60 Close of review

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:2018)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks

99.60 Withdrawal effective

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Machine tools - Safety - Stationary grinding machines (ISO 16089:2015)

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools

90.92 Standard to be revised

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Internal blinds - Performance requirements including safety

90.93 Standard confirmed

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Earth-moving machinery - Safety - Part 1: General requirements

99.60 Withdrawal effective

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Highway maintenance machines - Safety requirements

99.60 Withdrawal effective

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016)

99.60 Withdrawal effective

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Cranes - Mobile cranes

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders

99.60 Withdrawal effective

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015)

99.60 Withdrawal effective

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks

99.60 Withdrawal effective

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

90.93 Standard confirmed

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017)

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Power operated pedestrian doorsets - Safety in use - Requirements and test methods

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6:2017)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15)

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Shutters and external venetian blinds - Performance requirements including safety

90.93 Standard confirmed

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

External blinds and awnings - Performance requirements including safety

90.93 Standard confirmed

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests

99.60 Withdrawal effective

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Earth-moving machinery - Safety - Part 1: General requirements

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01)

99.60 Withdrawal effective

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)

99.60 Withdrawal effective

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017)

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)

90.93 Standard confirmed

C 173 Official journal reference
May 13, 2016 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)

99.60 Withdrawal effective

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Building construction machinery and equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2018)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1:2015)

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures (ISO 14123-2:2015)

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Safety of woodworking machines - Hand fed surface planing machines

99.60 Withdrawal effective

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Cranes - Loader cranes

99.60 Withdrawal effective

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements

99.60 Withdrawal effective

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods

90.20 Standard under periodical review

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines

99.60 Withdrawal effective

C 159 Official journal reference
Jun 5, 2012 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines

99.60 Withdrawal effective

C 159 Official journal reference
Jun 5, 2012 Official journal publication date

Garden equipment - Integrally powered shredders/chippers - Safety

60.60 Standard published

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

External blinds and awnings - Performance requirements including safety

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Cranes - Light crane systems

99.60 Withdrawal effective

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Safety requirements for foundry moulding and coremaking machinery and plant associated equipment

60.60 Standard published

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Cranes - Bridge and gantry cranes

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)

99.60 Withdrawal effective

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Safety of machinery - Safety requirements for steel converter and associated equipment

90.60 Close of review

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines

90.93 Standard confirmed

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Earth-moving machinery - Safety - Part 1: General requirements

99.60 Withdrawal effective

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Safety of escalators and moving walks - Part 1: Construction and installation

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks

99.60 Withdrawal effective

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Cranes - Access

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019)

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019)

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016)

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Machinery for forestry - General safety requirements (ISO 11850:2011/Amd 1:2016)

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Industrial, commercial, garage doors and gates - Product standard, performance characteristics

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety

90.93 Standard confirmed

C 173 Official journal reference
May 13, 2016 Official journal publication date

Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019)

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Snow grooming equipment - Safety requirements

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Leisure karts - Part 1: Safety requirements and test methods for karts

90.60 Close of review

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Internal blinds - Performance requirements including safety

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Cranes - Safety - Design - Requirements for equipment

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)

99.60 Withdrawal effective

C 173 Official journal reference
May 13, 2016 Official journal publication date

Plastics and rubber machines - Internal mixers - Safety requirements

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Cranes - Bridge and gantry cranes

99.60 Withdrawal effective

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Concrete compactors and smoothing machines - Safety

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Rail dependent storage and retrieval equipment - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001)

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001)

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors

60.60 Standard published

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements

99.60 Withdrawal effective

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements

90.93 Standard confirmed

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements

90.60 Close of review

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)

99.60 Withdrawal effective

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines

90.60 Close of review

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Pumps and pump units for liquids - Common safety requirements

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012)

60.60 Standard published

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Cranes - Equipment - Part 1: Electrotechnical equipment

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure

99.60 Withdrawal effective

C 159 Official journal reference
Jun 5, 2012 Official journal publication date

Cranes - Bridge and gantry cranes

99.60 Withdrawal effective

C 214 Official journal reference
Jul 20, 2011 Official journal publication date

Safety of machinery - Interlocking devices associated with guards - Principles for design and selection

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Presses - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Two-hand control devices - Functional aspects - Principles for design

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Road surface treatment machines - Safety requirements

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Agricultural machinery - Silos stationary unloaders for round silos - Safety

90.93 Standard confirmed

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety of escalators and moving walks - Part 1: Construction and installation

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel

90.92 Standard to be revised

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Tannery machines - Reciprocating roller machines - Safety requirements

90.60 Close of review

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements

90.93 Standard confirmed

C 54 Official journal reference
Feb 12, 2016 Official journal publication date

Conveyor belts - Drum friction testing

99.60 Withdrawal effective

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Food processing machinery - Intermediate provers - Safety and hygiene requirements

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Food processing machinery - Automatic dividers - Safety and hygiene requirements

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines

90.60 Close of review

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting

90.93 Standard confirmed

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading

90.93 Standard confirmed

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading

90.93 Standard confirmed

C 350 Official journal reference
Nov 15, 2012 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading

90.93 Standard confirmed

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading

90.93 Standard confirmed

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Tannery machines - Roller coating machines - Safety requirements

90.60 Close of review

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008)

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Powered hand-held hedge trimmers - Safety (ISO 10517:2009)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Drilling and foundation equipment - Safety - Part 4: Foundation equipment

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Drilling and foundation equipment - Safety - Part 1: Common requirements

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Agricultural and forestry machinery - Inter-row mowing units - Safety

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Cranes - Power driven winches and hoists - Part 1: Power driven winches

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Agricultural machinery - Trailers with tipping body - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Power operated pedestrian doorsets - Safety in use - Requirements and test methods

90.93 Standard confirmed

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Crane safety - General design - Part 2: Load effects

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cranes - Requirements for container handling spreaders

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Liquid pumps - Safety requirements - Procedure for hydrostatic testing

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Core drilling machines on stand - Safety

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Foundry machinery - Safety requirements for abrasive blasting equipment

90.92 Standard to be revised

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Safety requirements for pressure metal diecasting units

90.92 Standard to be revised

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills

90.60 Close of review

C 159 Official journal reference
Jun 5, 2012 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Cranes - Offshore cranes - Part 1: General-purpose offshore cranes

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines

90.60 Close of review

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Food processing machinery - Mincing machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Chop cutting machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Clipping machines - Safety and hygiene requirements

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Machinery for the supply and circulation of coating materials under pressure - Safety requirements

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements

90.92 Standard to be revised

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Food processors and blenders - Safety and hygiene requirements

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Cranes - Power driven winches and hoists - Part 1: Power driven winches

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Ceramic machines - Safety - Transfer platforms and cars

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machinery - Integral lighting of machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controlled (NC) boring and routing machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Band sawing machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ (ISO 3747:2000)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Food processing machinery - Dough sheeters - Safety and hygiene requirements

90.60 Close of review

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Food processing machinery - Baguette slicers - Safety and hygiene requirements

90.60 Close of review

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements

90.60 Close of review

C 136 Official journal reference
May 26, 2010 Official journal publication date

Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3

90.92 Standard to be revised

C 136 Official journal reference
May 26, 2010 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Rotary rack ovens - Safety and hygiene requirements

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of woodworking machines - Hand fed surface planing machines

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Planetary mixers - Safety and hygiene requirements

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Dough mixers - Safety and hygiene requirements

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Conveying, spraying and placing machines for concrete and mortar - Safety requirements

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Cranes - Manually controlled load manipulating devices

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Cranes - Safety - Hand powered cranes

90.92 Standard to be revised

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Four-sided moulding machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements

90.60 Close of review

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements

90.60 Close of review

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements

90.60 Close of review

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Food processing machinery - Moulders - Safety and hygiene requirements

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements

90.60 Close of review

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Footwear manufacturing machines - Lasting machines - Safety requirements

90.60 Close of review

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements

90.60 Close of review

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Surface planing and thicknessing machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - One side thickness planing machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages

90.60 Close of review

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Lifting platforms - Mast climbing work platforms

90.60 Close of review

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety requirements on Suspended Access Equipment - Design calculations, stability criteria, construction - Tests

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers

90.60 Close of review

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety requirements for lifting tables

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Plastics and rubber machines - Two roll mills - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Agricultural and forestry machinery - Reel machines for irrigation - Safety

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Agricultural machinery - Pick-up balers - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Agricultural machinery - Rotary mowers and flail-mowers - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Agricultural machinery - Vine shoot tipping machines - Safety

90.60 Close of review

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Agricultural machinery - Slurry tankers - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Combined woodworking machines

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Tannery machines - Rotating process vessels - Safety requirements

90.60 Close of review

C 136 Official journal reference
May 26, 2010 Official journal publication date

Tannery machines - Splitting and bandknife shearing machines - Safety requirements

90.60 Close of review

C 136 Official journal reference
May 26, 2010 Official journal publication date

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of packaging machines - Part 5: Wrapping machines

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Forest machinery - Self propelled machinery - Safety requirements

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of packaging machines - Part 6: Pallet wrapping machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of packaging machines - Part 3: Form, fill and seal machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Atomising and spraying equipment for coating materials - Safety requirements

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Food processing machinery - Bulk Milk Coolers on Farms - Requirements for construction, performance, suitability for use, safety and hygiene

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cranes - Safety - Tower cranes

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cranes - General design - Part 1: General principles and requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Underground mining machinery - Specification for the safety requirements of armoured face conveyors

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machine tools - Milling machines (including boring machines)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Centrifuges - Common safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Coating plants - Spray booths for application of organic powder coating material - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Coating plants - Combined booths - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011)

60.60 Standard published

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Safety - Part 1: General requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of packaging machines - Part 7: Group and secondary packaging machines

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Steel wire ropes - Safety - Part 2: Definitions, designation and classification

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Steel wire ropes - Safety - Part 3: Information for use and maintenance

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machine tools - Safety - Electro-discharge machines (ISO 28881:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Tannery machines - Reciprocating roller machines - Safety requirements

60.60 Standard published

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2008)

99.60 Withdrawal effective

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2004, including Cor 1:2006)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics

99.60 Withdrawal effective

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)

60.60 Standard published

C 159 Official journal reference
Jun 5, 2012 Official journal publication date

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

99.60 Withdrawal effective

C 87 Official journal reference
Mar 23, 2012 Official journal publication date

Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

99.60 Withdrawal effective

C 87 Official journal reference
Mar 23, 2012 Official journal publication date

Food processing machinery - Salad dryers - Safety and hygiene requirements

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety requirements for foundry moulding and coremaking machinery and plant associated equipment

90.92 Standard to be revised

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender

90.92 Standard to be revised

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements

90.60 Close of review

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Pie and tart machines - Safety and hygiene requirements

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements

90.60 Close of review

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Mobile road construction machinery - Safety - Part 1: Common requirements

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Crane safety - General design - Part 2: Load actions

99.60 Withdrawal effective

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Earth-moving machinery - Safety - Part 1: General requirements

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines

90.93 Standard confirmed

C 350 Official journal reference
Nov 15, 2012 Official journal publication date

Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests

90.93 Standard confirmed

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2009)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Masonry and stone cutting-off machines for job site - Safety

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cranes - Safety - Non-fixed load lifting attachments

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Floor cutting-off machines - Safety

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Transportable wall saw and wire saw equipment for job site - Safety

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Industrial, commercial and garage doors and gates - Installation and use

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cranes - Mobile cranes

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 7: Grinders

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Tunnelling machines - Air locks - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006, including Cor 1:2007)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of machinery - Fire prevention and fire protection (ISO 19353:2015)

99.60 Withdrawal effective

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining

90.93 Standard confirmed

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2008)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)

60.60 Standard published

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)

60.60 Standard published

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)

60.60 Standard published

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012)

60.60 Standard published

C 350 Official journal reference
Nov 15, 2012 Official journal publication date

Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Dryers and ovens, in which flammable substances are released - Safety requirements

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machine tools - Hydraulic press brakes

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Conveyor belts for general purpose use - Electrical and flammability safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders

90.93 Standard confirmed

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Machine tools - Safety - Stationary grinding machines

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of machine tools - Transfer and special-purpose machines

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Machine tools - Safety - Sawing machines for cold metal

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of machine tools - Milling machines (including boring machines)

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Machine tools - Safety - Machining centres

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Plastics and rubber machines - Thermoforming machines - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)

60.60 Standard published

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)

60.60 Standard published

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012)

60.60 Standard published

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Safety of industrial trucks - Self-propelled variable reach trucks

99.60 Withdrawal effective

C 87 Official journal reference
Mar 23, 2012 Official journal publication date

Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts

90.92 Standard to be revised

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machine-tools safety - Safety requirements for the design and construction of work holding chucks

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Maintenance for lifts and escalators - Rules for maintenance instructions

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machine tools - Safety - Stationary grinding machines

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles

99.60 Withdrawal effective

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Builders hoists for persons and materials with vertically guided cages

90.92 Standard to be revised

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)

99.60 Withdrawal effective

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2009)

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles

99.60 Withdrawal effective

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements

99.60 Withdrawal effective

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements

99.60 Withdrawal effective

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

90.20 Standard under periodical review

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and semi-anechoic rooms (ISO 3745:2003)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements - Amendment 2 (ISO 10326-1:1992/Amd 2:2011)

99.60 Withdrawal effective

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Agricultural machinery - Front loaders - Safety

90.93 Standard confirmed

C 136 Official journal reference
May 26, 2010 Official journal publication date

Cranes - Equipment - Part 2: Non-electrotechnical equipment

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Garden equipment - Powered lawnmowers - Safety

99.60 Withdrawal effective

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements

90.93 Standard confirmed

C 173 Official journal reference
May 13, 2016 Official journal publication date

Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Vehicle lifts

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016)

99.60 Withdrawal effective

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks

90.93 Standard confirmed

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks

99.60 Withdrawal effective

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Machine tools - Safety - Electro-discharge machines - Technical Corrigendum 1 (ISO 28881:2013/Cor 1:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Internal blinds - Performance requirements including safety

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cranes - Loader cranes

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Pasta processing plants - Pasta presses - Safety and hygiene requirements

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Pasta processing plants - Dryers and coolers - Safety and hygiene requirements

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Conveyor belts for use in underground installations - Electrical and flammability safety requirements

90.93 Standard confirmed

C 173 Official journal reference
May 13, 2016 Official journal publication date

Tunnelling machines - Air locks - Safety requirements

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Tunnelling machinery - Safety requirements

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Agricultural and forestry machinery - Seed drills - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Pumps and pump units for liquids - Common safety requirements

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices

90.60 Close of review

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Builders' hoists for goods - Part 1: Hoists with accessible platforms

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety

60.60 Standard published

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety

99.60 Withdrawal effective

C 110 Official journal reference
Apr 11, 2014 Official journal publication date

Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s

90.20 Standard under periodical review

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 2: Filters, requirements and test procedures

99.60 Withdrawal effective

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Dryers and ovens, in which flammable substances are released - Safety requirements

90.60 Close of review

C 173 Official journal reference
May 13, 2016 Official journal publication date

Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Noise test code for foundry machines and equipment

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value

90.20 Standard under periodical review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections (ISO 11204:1995, including Cor 1:1997)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing

99.60 Withdrawal effective

C 214 Official journal reference
Jul 20, 2011 Official journal publication date

Plastics and rubber machines - Thermoforming machines - Safety requirements

90.93 Standard confirmed

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Concrete compactors and smoothing machines - Safety

90.93 Standard confirmed

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures (ISO 16231-2:2015)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Cranes - General design - Part 1: General principles and requirements

90.93 Standard confirmed

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Safety of woodworking machines - Four sided moulding machines

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2006)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd 1:2007)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Safety of escalators and moving walks - Part 1: Construction and installation

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Food processing machinery - Portion cutting machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Atomising and spraying equipment for coating materials - Safety requirements

90.92 Standard to be revised

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016)

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms - Amendment 1 (ISO 3745:2012/Amd 1:2017)

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Road surface treatment machines - Safety requirements

90.60 Close of review

C 173 Official journal reference
May 13, 2016 Official journal publication date

Safety of thermal cutting machines (ISO 17916:2016)

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Crane safety - General design - Part 2: Load actions

99.60 Withdrawal effective

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Piling equipment - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Tunnelling machines - Road headers and continuous miners - Safety requirements

90.93 Standard confirmed

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Components for slings - Safety - Part 4: Links, Grade 8

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Components for slings - Safety - Part 1: Forged steel components, Grade 8

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools

99.60 Withdrawal effective

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Screens for laser working places - Safety requirements and testing

60.60 Standard published

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Machine tools - Safety - Hydraulic presses

99.60 Withdrawal effective

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Safety of woodworking machines - One side thickness planing machines

99.60 Withdrawal effective

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Safety of woodworking machines - Surface planing and thicknessing machines

99.60 Withdrawal effective

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Safety of machine tools - Hydraulic press brakes

90.93 Standard confirmed

C 110 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines

99.60 Withdrawal effective

C 350 Official journal reference
Nov 15, 2012 Official journal publication date

Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines

90.93 Standard confirmed

C 350 Official journal reference
Nov 15, 2012 Official journal publication date

Machine tools - Safety - Stationary grinding machines

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Food processing machinery - Vegetable peelers - Safety and hygiene requirements

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Band saw machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Circular saw machines - Safety and hygiene requirements

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements

90.60 Close of review

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

90.93 Standard confirmed

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines

90.93 Standard confirmed

C 110 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)

90.93 Standard confirmed

C 110 Official journal reference
Apr 11, 2014 Official journal publication date

Equipment and components intended for use in potentially explosive atmospheres in underground mines

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Garden equipment - Walk-behind combustion engine powered trimmers - Safety

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Equipment and components intended for use in potentially explosive atmospheres in underground mines

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Fire prevention and protection

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Prevention of unexpected start-up

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust

99.60 Withdrawal effective

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

99.60 Withdrawal effective

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009/Amd 1:2015)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Automatic forced draught burners for liquid fuels

99.60 Withdrawal effective

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

All terrain vehicles (ATVs - Quads) - Safety requirements and test methods

60.60 Standard published

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators

90.93 Standard confirmed

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Mixing machines - Safety and hygiene requirements

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Food processing machinery - Curing injection machines - Safety and hygiene requirements

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

90.60 Close of review

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Bread slicers - Safety and hygiene requirements

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Beam mixers - Safety and hygiene requirements

90.92 Standard to be revised

C 136 Official journal reference
May 26, 2010 Official journal publication date

Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Machine tools - Safety - Turning machines (ISO 23125:2010)

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems

90.93 Standard confirmed

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders - Amendment 1: Cupped wire brushes (ISO 28927-1:2009/Amd 1:2017)

99.60 Withdrawal effective

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of packaging machines - Part 8: Strapping machines

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles

99.60 Withdrawal effective

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of Machinery - Safety requirements for cold flat rolling mills

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of Machinery - Safety requirements for hot flat rolling mills

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001)

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001)

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001)

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)

60.60 Standard published

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)

60.60 Standard published

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Plastics and rubber machines - Injection moulding machines - Safety requirements

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of industrial trucks - Test methods for measuring noise emissions

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of industrial trucks - Test methods for measuring vibration

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of industrial trucks - Additional requirements for automated functions on trucks

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cranes - Information for use and testing - Part 2: Marking

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cranes - Information for use and testing - Part 1: Instructions

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Winding machines for film or sheet - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Steel wire ropes - Safety - Part 1: General requirements

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Components for slings - Safety - Part 6: Links - Grade 4

90.20 Standard under periodical review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4

90.20 Standard under periodical review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cranes - Controls and control stations

90.92 Standard to be revised

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cranes - Access

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool (ISO/TS 28923:2007 modified)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2008)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2008)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Plastics and rubber machines - Winding machines for film or sheet - Safety requirements

90.93 Standard confirmed

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Lifting platforms - Mast climbing work platforms

60.60 Standard published

C 136 Official journal reference
May 26, 2010 Official journal publication date

Safety for conveyor belts for winter sport or leisure use

90.92 Standard to be revised

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Ceramic machines - Safety - Transfer platforms and cars

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified)

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)

60.60 Standard published

C 99 Official journal reference
Apr 5, 2013 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)

60.60 Standard published

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Ceramic machines - Safety - Loading and unloading of fine clay tiles

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2008)

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging

90.20 Standard under periodical review

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011)

60.60 Standard published

C 214 Official journal reference
Jul 20, 2011 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)

60.60 Standard published

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Agricultural and forestry machinery - Solid fertilizer distributors - Safety

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Conveyor belts for use in underground installations - Electrical and flammability safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology

99.60 Withdrawal effective

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours

99.60 Withdrawal effective

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Cranes - General design - Part 1: General principles and requirements

99.60 Withdrawal effective

C 136 Official journal reference
May 26, 2010 Official journal publication date

Plastics and rubber machines - Tyre curing machines - Safety requirements

90.93 Standard confirmed

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)

99.60 Withdrawal effective

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006/Cor 1:2009)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999, including Cor 1:2001)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Highway maintenance machines - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery

90.20 Standard under periodical review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings

90.20 Standard under periodical review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Human body measurements - Part 3: Anthropometric data

90.20 Standard under periodical review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Visual danger signals - General requirements, design and testing

90.20 Standard under periodical review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - System of auditory and visual danger and information signals

90.20 Standard under periodical review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Calenders - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Internal mixers - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Two roll mills - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Safety - Part 12: Requirements for cable excavators

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery

90.20 Standard under periodical review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Human physical performance - Part 1: Terms and definitions

90.20 Standard under periodical review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation

90.20 Standard under periodical review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Shutters - Performance requirements including safety

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

External blinds - Performance requirements including safety

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Automatic forced draught burners for gaseous fuels

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02)

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery - Amendment 1 (ISO 9902-7:2001/Amd 1:2009)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles - Amendment 1 (ISO 12100-2:2003/Amd 1:2009)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology - Amendment 1 (ISO 12100-1:2003/Amd 1:2009)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails - Amendment 1 (ISO 14122-3:2001/Amd 1:2010)

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways - Amendment 1 (ISO 14122-2:2001/Amd 1:2010)

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels - Amendment 1 (ISO 14122-1:2001/Amd 1:2010)

99.60 Withdrawal effective

C 284 Official journal reference
Oct 20, 2010 Official journal publication date

Screens for laser working places - Safety requirements and testing

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Rough-terrain variable reach trucks - Visibility - Test methods and verification

60.60 Standard published

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Builders hoists for persons and materials with vertically guided cages

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Agricultural machinery - Potato harvesting equipment - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Agricultural and forestry machinery - Solid fertilizer distributors - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Agricultural machinery - Manure spreaders - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of machine tools - Transfer and special-purpose machines

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machine tools - Safety - Guillotine shears

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machine tools - Safety - Sawing machines for cold metal

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machine tools - Pneumatic presses

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machine tools - Safety - Electro discharge machines

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machine tools - Drilling machines

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machine tools - Safety - Machining centres

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Food processing machinery - Basic concepts - Part 2: Hygiene requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machine tools - Safety - Hydraulic presses

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machine tools - Mechanical presses - Safety

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Safety - Part 8: Requirements for graders

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Safety - Part 7: Requirements for scrapers

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Earth-moving machinery - Safety - Part 3: Requirements for loaders

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Drill rigs - Safety

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Automatic forced draught burners for gaseous fuels

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012)

99.60 Withdrawal effective

C 350 Official journal reference
Nov 15, 2012 Official journal publication date

Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 214 Official journal reference
Jul 20, 2011 Official journal publication date

Garden equipment - Integrally powered shredders/chippers - Safety

90.93 Standard confirmed

C 214 Official journal reference
Jul 20, 2011 Official journal publication date

Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014)

60.60 Standard published

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Food processing machinery - Slicing machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements

90.60 Close of review

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks

99.60 Withdrawal effective

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 1: Polishing machines, modified feed forces (ISO 28927-8:2009/Amd 1:2015)

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Machine tools - Safety - Turning machines - Amendment 1 (ISO 23125:2010/Amd 1:2012)

99.60 Withdrawal effective

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements

90.93 Standard confirmed

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Cranes - Mobile cranes

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives

90.92 Standard to be revised

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Steel wire rope slings - Safety - Part 1: Slings for general lifting service

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing

90.92 Standard to be revised

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings

90.20 Standard under periodical review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Integrated manufacturing systems - Basic requirements - Amendment 1 (ISO 11161:2007/Amd 1:2010)

60.60 Standard published

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002)

60.60 Standard published

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006)

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders - Amendment 1 (ISO 14122-4:2004/Amd 1:2010)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013)

60.60 Standard published

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery - Amendment 1 (ISO 9902-6:2001/Amd 1:2009)

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery - Amendment 1 (ISO 9902-5:2001/Amd 1:2009)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 1 (ISO 9902-4:2001/Amd 1:2009)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery - Amendment 1 (ISO 9902-2:2001/Amd 1:2009)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Noise test code - Part 1: Common requirements - Amendment 1 (ISO 9902-1:2001/Amd 1:2009)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Textile machinery - Noise test code - Part 3: Nonwoven machinery - Amendment 1 (ISO 9902-3:2001/Amd 1:2009)

60.60 Standard published

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Conveying, spraying and placing machines for concrete and mortar - Safety requirements

90.92 Standard to be revised

C 350 Official journal reference
Nov 15, 2012 Official journal publication date

Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines

90.93 Standard confirmed

C 214 Official journal reference
Jul 20, 2011 Official journal publication date

Vehicle lifts

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Mobile or movable jacks and associated lifting equipment

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Winter service machines - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Machines for road surface cleaning - Safety requirements

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Safety requirements for strip processing line machinery and equipment

99.60 Withdrawal effective

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)

60.60 Standard published

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 4: Non­rotary percussive power tools (ISO 11148-4:2010)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2010)

99.60 Withdrawal effective

C 110 Official journal reference
Apr 8, 2011 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011)

60.60 Standard published

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)

60.60 Standard published

C 256 Official journal reference
Aug 24, 2012 Official journal publication date

Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings

99.60 Withdrawal effective

C 61 Official journal reference
Feb 29, 2012 Official journal publication date

Dock levellers - Safety requirements

90.60 Close of review

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)

60.60 Standard published

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Cranes - Slewing jib cranes

90.93 Standard confirmed

C 87 Official journal reference
Mar 23, 2012 Official journal publication date

Crane safety - General design - Part 2: Load actions

99.60 Withdrawal effective

C 338 Official journal reference
Nov 18, 2011 Official journal publication date

Cranes - Safety - Design - Requirements for equipment

90.60 Close of review

C 348 Official journal reference
Nov 28, 2013 Official journal publication date

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding

90.93 Standard confirmed

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety

99.60 Withdrawal effective

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Plastics and rubber machines - Blow moulding machines - Safety requirements

90.93 Standard confirmed

C 214 Official journal reference
Sep 8, 2009 Official journal publication date

Household and similar electrical appliances - Safety - Part 1: General requirements

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills

60.60 Standard published

L 102 Official journal reference
Apr 2, 2020 Official journal publication date

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

60.60 Standard published

L 102 Official journal reference
Apr 2, 2020 Official journal publication date

Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Safety of machinery - Requirements for cableless control systems of machinery

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 1: General requirements

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 1: General requirements

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Household and similar electrical appliances - Safety - Part 1: General requirements

60.60 Standard published

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 1: General requirements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines for commercial use

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements

90.93 Standard confirmed

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Household and similar electrical appliances - Safety - Part 1: General requirements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 1: General requirements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Household and similar electrical appliances - Safety - Part 1: General requirements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Stationary electrostatic application equipment for ignitable flock material - Safety requirements

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 1: General requirements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Safety of hand-held electric motor operated tools - Particular requirements for spray guns

90.93 Standard confirmed

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 1: General requirements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Safety of transportable motor-operated electric tools - Part 1: General requirements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 1: General requirements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for automatic machines for floor treatment for commercial use

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 1: General requirements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 1: General requirements

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV

99.60 Withdrawal effective

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Safety of machinery - Functional safety of safety-related control systems

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Stationary electrostatic application equipment for ignitable flock material - Safety requirements

90.93 Standard confirmed

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 1: General requirements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water supply

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Functional safety of safety-related electrical, Electronic and programmable electronic control systems

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of hand-held electric motor operated tools - Particular requirements for spray guns

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 1: General requirements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)

60.60 Standard published

L 075 Official journal reference
Mar 19, 2019 Official journal publication date

Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

60.60 Standard published

C 220 Official journal reference
Jul 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified)

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified)

60.60 Standard published

C 332/01 Official journal reference
Sep 9, 2016 Official journal publication date

Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers

90.93 Standard confirmed

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor

60.60 Standard published

C 092 Official journal reference
Mar 9, 2018 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws

60.60 Standard published

C 173 Official journal reference
May 13, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers

60.60 Standard published

C 183 Official journal reference
Jun 9, 2017 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 1: General requirements

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Safety of transportable motor-operated electric tools - Part 1: General requirements

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements

60.60 Standard published

C 92 Official journal reference
Feb 13, 2015 Official journal publication date

Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment and floor cleaning machines for commercial use

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified)

60.60 Standard published

C 14 Official journal reference
Jan 15, 2016 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners

99.60 Withdrawal effective

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans

60.60 Standard published

C 110/02 Official journal reference
Apr 11, 2014 Official journal publication date

Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements

60.60 Standard published

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Safety of machinery - Requirements for cableless control systems of machinery

60.60 Standard published

L 072 Official journal reference
Mar 3, 2021 Official journal publication date

Cranes - Light crane systems

90.20 Standard under periodical review

L 366 Official journal reference
Oct 15, 2021 Official journal publication date

Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders

60.60 Standard published

L 115 Official journal reference
Apr 13, 2022 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010/Amd 1:2017)

60.60 Standard published

L 102/6 Official journal reference
Apr 2, 2020 Official journal publication date

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/Amd 1:2017)

60.60 Standard published

L 75 Official journal reference
Mar 13, 2019 Official journal publication date