EN 13871:2014

Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements EN 13871:2014

Publication date:   Jan 21, 2015

Scope

1.1 General
This European Standard covers cube cutting machines (see Figures 1 to 6 and 12 to 18) and specifies requirements for the design and manufacture.
The machines covered by this document are used to size reduce fresh meat, meat products and products of the same kind (e.g. fish, vegetables and cheese) by cutting in a cutting chamber.
This document deals with all significant hazards, hazardous situations and events relevant to machines, appliances and machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document deals with the hazards which can arise during all the lifetime of the machine, including the phases of transport, assembly, operation, maintenance, dismantling, disabling and scrapping of the machine.
This document is not applicable to cubes cutting machines which are manufactured before the date of publication of this document by CEN.
1.2 Types of cube cutting machines covered by this standard
This European Standard covers the following types of cubes cutting machines:
- cubes cutting machines with a forward feed plunger, a lattice and a sickle/multi-segment blade with loading by hand (see Figure 2);
- cubes cutting machines with a forward feed plunger, a lattice, a sickle/multi-segment blade, a feed intake hopper and a loading device (see Figure 1);
- cubes cutting machines with a rotating cutting tool, a sickle/multi-segment blade and a feed conveyor (see Figures 3 and 5);
- cubes cutting machines with a rotating cutting tool and centrifugal force loading (see Figure 6);
- cubes cutting machines with or without integrated conveyor systems.
1.3 Machine construction
Cubes cutting machines are constructed of a machine frame, a feed intake chamber/magazine, a forward feed plunger or nip roller, a lattice or a rotating cutting tool, a sickle/multi-segment blade, an associated drive and electrical, hydraulic and pneumatic components, depending on machine type.
Cubes cutting machines in the scope of this document may be equipped with:
- a lid over the feed intake chamber/magazine;
- a transfer car for the sickle /multi-segment blade, cutting blade and lattice;
- a loading device;
- a feed conveyor.
(...)
1.4 Intended use
The intended use (as defined in EN ISO 12100:2010, 3.23) of cubes cutting machines as dealt with in this document is described in 1.1.
The product to be cut is fed manually or by the loading device/feed conveyor into the feed intake chamber. The product is fed to the cutting unit by the forward feed plunger and/or by the nip roller or by centrifugal force and size reduced.

Related legislation

Legislation related to this standard