EN 12629-7:2004+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products EN 12629-7:2004+A1:2010

Publication date:   Nov 16, 2010

Scope

1.1 This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to stationary and mobile equipment for the benched manufacture of prestressed products. The manufacturing bed is a machine with which other associated machines work simultaneously. Moreover, these machines are generally used on beds installed in parallel.
EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium silicate.
This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers.
1.2 This standard gives particular requirements for the design of the following machines:
- Pre-stressing bed (schematic representation is given in annex A);
- Bed sweeper, vacuum cleaner, oiler, wire-guide machine (schematic representation is given in annex B);
- Bed layout machine (schematic representation is given in annex C);
- Strand pushing/pulling machine (schematic representation is given in annex D);
- Spinner, extruder, vibrodistributor (schematic representation is given in annex E);
- Tarpaulin paying out and winding in machine (schematic representation is given in annex F);
- Sawing machine (schematic representation is given in annex G).
NOTE The manufacturing operations include some or all of the following:
- treating pre-stressing bed with release agent;
- "marking out" the elements (slabs, plain slabs, etc.) to be made;
- running the pre-stressing strands;
- pre-tensioning;
- installing the shutterings, (formwork, side shutters, end plates and inserts)
- fixing reinforcement;
- tensioning;
- concrete distribution and compaction;
- winding out the tarpaulin;
- heating;
- detensioning;
- removal of shettering, formwork, etc. ;
- strands cutting or sawing;
- removal of final products;
- bed cleaning.
The concrete supply interface which is taken into account for safety is also considered.

Related legislation

Legislation related to this standard