Additive manufacturing of metals - Non-destructive testing and evaluation - Defect detection in parts (ISO/ASTM TR 52905:2023)
60.60 Standard published
Additive manufacturing - Non-destructive testing - Intentionally seeding flaws in metallic parts (ISO/ASTM/TR 52906:2022)
60.60 Standard published
Non-destructive testing - Methods for absolute calibration of acoustic emission transducers by the reciprocity technique (ISO/TR 13115:2011)
60.60 Standard published
Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019)
60.60 Standard published
Non-destructive testing - NDT personnel training organizations (ISO/TS 25108:2018)
60.60 Standard published
Non-destructive testing - Methodology for qualification of non-destructive tests
60.60 Standard published
Non-destructive testing - Penetrant and magnetic particle testing using blue light
90.93 Standard confirmed
Non-destructive testing - Lighting in penetrant and magnetic particle testing, good practice
60.60 Standard published
Non-destructive testing - Penetrant testing - Reference photographs and sizing of indications
60.60 Standard published
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
90.93 Standard confirmed
Non-destructive testing of steel forgings - Part 2: Penetrant testing
90.93 Standard confirmed
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
90.93 Standard confirmed
Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
90.93 Standard confirmed
Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
90.20 Standard under periodical review
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number
60.60 Standard published
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
90.60 Close of review
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
60.60 Standard published
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method
90.60 Close of review
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
90.92 Standard to be revised
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
90.92 Standard to be revised
Non-destructive testing - Radiographic testing - Determination of the size of industrial radiographic gamma sources
90.60 Close of review
Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties
90.20 Standard under periodical review
Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices
90.20 Standard under periodical review
Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
90.20 Standard under periodical review
Non-destructive testing of welded joints in thermoplastics semi- finished products - Part 2: X-ray radiographic testing
90.20 Standard under periodical review
Non-destructive testing - Leak testing - Pressure change method
60.60 Standard published
Non-destructive testing - Terminology - Part 10: Terms used in visual testing
90.93 Standard confirmed
Non-destructive testing - Terminology - Terms used in X-ray diffraction from polycrystalline and amorphous materials
90.20 Standard under periodical review
Non destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods
90.60 Close of review
Non-destructive testing - Terminology - Part 3: Terms used in industrial radiographic testing
90.60 Close of review
Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing
90.92 Standard to be revised
Non-destructive testing - Acoustic emission - Equipment characterisation - Part 1: Equipment description
90.60 Close of review
Non-destructive testing - Acoustic emission testing - Equipment characterisation - Part 2: Verification of operating characteristics
60.60 Standard published
Non-destructive testing - Acoustic emission testing - General principles
90.92 Standard to be revised
Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
90.93 Standard confirmed
Non-destructive testing - X-ray diffraction from polycrystalline and amorphous material - Part 1: General principles
90.20 Standard under periodical review
Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures
90.20 Standard under periodical review
Non-destructive testing - Acoustic emission testing - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
90.93 Standard confirmed
Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems
90.92 Standard to be revised
Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
90.92 Standard to be revised
Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
90.93 Standard confirmed
Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
90.93 Standard confirmed
Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
90.60 Close of review
Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria
90.60 Close of review
Non-destructive testing - Leak testing - Bubble emission techniques
90.93 Standard confirmed
Non-destructive testing - Leak testing - Bubble emission techniques
60.60 Standard published
Non-destructive testing - Thermographic testing - Part 1: General principles
90.60 Close of review
Non-destructive testing - Thermographic testing - Part 2: Equipment
90.60 Close of review
Non-destructive testing - Thermographic testing - Part 3: Terms and definitions
90.60 Close of review
Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 1: Requirements for ultrasonic inspection and evaluation principles
90.93 Standard confirmed
Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 2: Eddy current testing of rails in track
60.60 Standard published
Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 3: Requirements for identifying internal and surface rail defects
90.93 Standard confirmed
Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 4: Qualification of personnel for non-destructive testing on rails
90.60 Close of review
Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 5: Non-destructive testing on welds in track
60.60 Standard published
Railway applications - Rolling stock - Requirements for non-destructive testing on running gear in railway maintenance - Part 1: Wheelsets
90.93 Standard confirmed
Non-destructive testing - Thermographic testing - Active thermography
90.60 Close of review
Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
60.60 Standard published
Non-destructive testing - Acoustic emission testing - In-service acoustic emission monitoring of metallic pressure equipment and structures - General requirements
60.60 Standard published
Non-destructive testing - Thermographic testing - Active thermography with laser excitation
60.60 Standard published
Non-destructive testing - Leak testing - Criteria for method and technique selection
90.92 Standard to be revised
Non-destructive testing - Leak testing - Criteria for method and technique selection
60.60 Standard published
Aerospace series - Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing
60.60 Standard published
Aerospace series - Qualification and approval of personnel for non-destructive testing
60.60 Standard published
Industrial non-destructive testing equipment - Electron linear accelerator
60.60 Standard published
Industrial non-destructive testing equipment - Electron linear accelerator
60.60 Standard published
Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2021)
60.60 Standard published
Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2021, Corrected version 2022-02)
60.60 Standard published
Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020)
60.60 Standard published
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011)
60.60 Standard published
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
60.60 Standard published
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011)
60.60 Standard published
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
60.60 Standard published
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011)
60.60 Standard published
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
60.60 Standard published
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011)
60.60 Standard published
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
60.60 Standard published
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011)
60.60 Standard published
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch; change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
60.60 Standard published
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011)
60.60 Standard published
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
60.60 Standard published
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
60.60 Standard published
Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011)
60.60 Standard published
Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011)
60.60 Standard published
Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)
60.60 Standard published
Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019)
60.60 Standard published
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011)
60.60 Standard published
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
60.60 Standard published
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011)
60.60 Standard published
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
60.60 Standard published
Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
60.60 Standard published
Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
60.60 Standard published
Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:2018)
60.60 Standard published
Non-destructive testing - Penetrant testing - Vocabulary (ISO 12706:2009)
60.60 Standard published
Non-destructive testing - Magnetic particle testing - Vocabulary (ISO 12707:2016)
60.60 Standard published
Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2019)
60.60 Standard published
Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
60.60 Standard published
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)
60.60 Standard published
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements (ISO 14096-2:2005)
60.60 Standard published
Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification (ISO 15548-1:2013)
60.60 Standard published
Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification (ISO 15548-2:2013)
60.60 Standard published
Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification (ISO 15548-3:2008)
60.60 Standard published
Non-destructive testing - Eddy current testing - General principles (ISO 15549:2019)
60.60 Standard published
Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2018)
60.60 Standard published
Non-destructive testing - Radiation methods for computed tomography - Part 1: Vocabulary (ISO 15708-1:2024)
60.60 Standard published
Non-destructive testing - Radiation methods for Computed tomography - Part 2: Principles, equipment and samples (ISO 15708-2:2017)
60.60 Standard published
Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation (ISO 15708-3:2017)
60.60 Standard published
Non-destructive testing - Radiation methods for computed tomography - Part 4: Qualification (ISO 15708-4:2017)
60.60 Standard published
Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays (ISO 16371-2:2017, Corrected version 2018-05)
60.60 Standard published
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method (ISO 16526-1:2011)
60.60 Standard published
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011)
60.60 Standard published
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method (ISO 16526-3:2011)
60.60 Standard published
Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2024)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Specification for a step wedge standard block (ISO 16946:2024)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2022)
60.60 Standard published
Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016)
60.60 Standard published
Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2022)
60.60 Standard published
Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2022, Corrected version 2023-02)
60.60 Standard published
Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016)
60.60 Standard published
Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)
60.60 Standard published
Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
60.60 Standard published
Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015)
60.60 Standard published
Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2024)
60.60 Standard published
Non-destructive Testing - Evaluation of vision acuity of NDT personnel (ISO 18490:2015)
60.60 Standard published
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO 18563-1:2022)
60.60 Standard published
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Array probes (ISO 18563-2:2024)
60.60 Standard published
Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Complete systems (ISO 18563-3:2024)
60.60 Standard published
Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013)
60.60 Standard published
Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013)
60.60 Standard published
Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes (ISO 19232-3:2013)
60.60 Standard published
Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables (ISO 19232-4:2013)
60.60 Standard published
Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators (ISO 19232-5:2018)
60.60 Standard published
Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO 19285:2017)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT) (ISO 19675:2017)
60.60 Standard published
Non-destructive testing - Equipment for eddy current examination - Array probe characteristics and verification (ISO 20339:2017)
60.60 Standard published
Non-destructive testing - Leak testing - Vocabulary (ISO 20484:2017)
60.60 Standard published
Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017)
60.60 Standard published
Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
60.60 Standard published
Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
60.60 Standard published
Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018)
60.60 Standard published
Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO 20769-2:2018)
60.60 Standard published
Non-destructive testing - Standard test method for determining residual stresses by neutron diffraction (ISO 21432:2019)
60.60 Standard published
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)
60.60 Standard published
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
60.60 Standard published
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
60.60 Standard published
Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
60.60 Standard published
Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)
60.60 Standard published
Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
60.60 Standard published
Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015)
60.60 Standard published
Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
60.60 Standard published
Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012)
60.60 Standard published
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2021)
60.60 Standard published
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2021)
60.60 Standard published
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013)
60.60 Standard published
Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998)
90.93 Standard confirmed
Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
60.60 Standard published
Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008)
60.60 Standard published
Non-destructive testing of welds - Phased array ultrasonic testing (UT-PA) for thin-walled steel components - Acceptance levels (ISO 4761:2022)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017)
60.60 Standard published
Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013)
60.60 Standard published
Non-destructive testing - Industrial radiographic illuminators - Minimum requirements (ISO 5580:2023)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
60.60 Standard published
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2021)
60.60 Standard published
Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016)
60.60 Standard published
Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015)
60.60 Standard published
Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2015)
60.60 Standard published
Amendment 1 - Industrial non-destructive testing equipment - Electron linear accelerator
60.60 Standard published
Industrial non-destructive testing equipment - Electron linear accelerator
60.60 Standard published
Non-destructive testing of steel tubes — Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
90.60 Close of review
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
60.60 Standard published
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
60.60 Standard published
Space systems — Non-destructive testing — Automatic ultrasonic inspection method of graphite ingot for solid rocket motors
90.93 Standard confirmed
Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
60.60 Standard published
Non-destructive testing — Infrared thermography — Vocabulary
90.92 Standard to be revised
Non-destructive testing — Infrared thermographic testing — General principles
90.60 Close of review
Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
90.60 Close of review
Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria
60.60 Standard published
Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
90.60 Close of review
Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria
60.60 Standard published
Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
90.60 Close of review
Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness — Amendment 1: Change of dimensions of the reference notch; change acceptance criteria
60.60 Standard published
Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
90.60 Close of review
Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes — Amendment 1: Change of acceptance criteria
60.60 Standard published
Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
90.60 Close of review
Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections — Amendment 1: Change of dimensions of the reference notch; change acceptance criteria
60.60 Standard published
Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
90.60 Close of review
Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 1: Change of dimensions of the reference notch
60.60 Standard published
Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 2: Change acceptance criteria
60.60 Standard published
Non-destructive testing of steel tubes — Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
90.60 Close of review
Non-destructive testing of steel tubes — Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
90.60 Close of review
Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
90.60 Close of review
Non-destructive testing of steel tubes — Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
90.60 Close of review
Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
90.60 Close of review
Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections — Amendment 1: Change acceptance criteria
60.60 Standard published
Non-destructive testing of steel tubes — Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
90.60 Close of review
Non-destructive testing of steel tubes — Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes — Amendment 1: Change acceptance criteria
60.60 Standard published
Steel products — Employer's qualification system for non-destructive testing (NDT) personnel
90.60 Close of review
Non-destructive testing of welds — Ultrasonic testing — Acceptance levels
90.92 Standard to be revised
Non-destructive testing — Industrial radiographic film — Part 1: Classification of film systems for industrial radiography
90.93 Standard confirmed
Non-destructive testing — Industrial radiographic films — Part 2: Control of film processing by means of reference values
90.93 Standard confirmed
Non-destructive testing — Magnetic particle testing — Vocabulary
90.93 Standard confirmed
Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers
90.93 Standard confirmed
Non-destructive testing — Acoustic emission inspection — Secondary calibration of acoustic emission sensors
90.93 Standard confirmed
Non-destructive testing — Acoustic emission inspection — Vocabulary
90.92 Standard to be revised
Non-destructive testing — Eddy current testing — Vocabulary
90.20 Standard under periodical review
Non-destructive testing — Thermal neutron radiographic testing — Determination of beam L/D ratio
90.93 Standard confirmed
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
90.92 Standard to be revised
Non-destructive testing — Qualification of radiographic film digitisation systems — Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
90.92 Standard to be revised
Non-destructive testing — Qualification of radiographic film digitisation systems — Part 2: Minimum requirements
90.92 Standard to be revised
Non-destructive testing — Equipment for eddy current examination — Part 1: Instrument characteristics and verification
90.92 Standard to be revised
Non-destructive testing — Equipment for eddy current examination — Part 2: Probe characteristics and verification
90.60 Close of review
Non-destructive testing — Equipment for eddy current examination — Part 3: System characteristics and verification
90.60 Close of review
Non-destructive testing — Eddy current testing — General principles
90.60 Close of review
Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels
90.92 Standard to be revised
Non-destructive testing — Radiation methods for computed tomography — Part 1: Vocabulary
60.60 Standard published
Non-destructive testing — Radiation methods for computed tomography — Part 2: Principles, equipment and samples
90.92 Standard to be revised
Non-destructive testing — Radiation methods for computed tomography — Part 3: Operation and interpretation
90.92 Standard to be revised
Non-destructive testing — Radiation methods for computed tomography — Part 4: Qualification
90.92 Standard to be revised
Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 1: Classification of systems
90.92 Standard to be revised
Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 2: General principles for testing of metallic materials using X-rays and gamma rays
90.93 Standard confirmed
Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 1: Voltage divider method
90.93 Standard confirmed
Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 2: Constancy check by the thick filter method
90.93 Standard confirmed
Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 3: Spectrometric method
90.93 Standard confirmed
Non-destructive testing — Ultrasonic thickness measurement
90.92 Standard to be revised
Non-destructive testing — Ultrasonic testing — General principles
60.60 Standard published
Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
90.92 Standard to be revised
Non-destructive testing — Ultrasonic testing — Transmission technique
90.92 Standard to be revised
Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
90.92 Standard to be revised
Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
90.92 Standard to be revised
Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
90.92 Standard to be revised
Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
90.92 Standard to be revised
Non-destructive testing — Acoustic emission testing — Measurement method for acoustic emission signals in concrete
90.60 Close of review
Non-destructive testing — Acoustic emission testing — Test method for damage qualification of reinforced concrete beams
90.60 Close of review
Non-destructive testing — Acoustic emission testing — Test method for classification of active cracks in concrete structures
90.60 Close of review
Non-destructive testing — Ultrasonic testing — Specification for a step wedge standard block
60.60 Standard published
Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
60.60 Standard published
Non-destructive testing of welds — General rules for metallic materials
90.92 Standard to be revised
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
60.60 Standard published
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
60.60 Standard published
Non-destructive testing of welds — Visual testing of fusion-welded joints
90.93 Standard confirmed
Non-destructive testing of welds — Magnetic particle testing
90.93 Standard confirmed
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
90.92 Standard to be revised
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
90.93 Standard confirmed
Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission
60.60 Standard published
Non-destructive testing — Long-range inspection of above-ground pipelines and plant piping using guided wave testing with axial propagation
90.93 Standard confirmed
Non-destructive testing — Acoustic emission testing — Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers
90.93 Standard confirmed
Non-destructive testing — Infrared thermography — Part 1: Characteristics of system and equipment
90.60 Close of review
Non-destructive testing — Infrared thermography — Part 2: Test method for integrated performance of system and equipment
60.60 Standard published
Non-destructive testing — Evaluation of vision acuity of NDT personnel
90.92 Standard to be revised
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 1: Instruments
60.60 Standard published
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Array probes
60.60 Standard published
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 3: Complete systems
60.60 Standard published
Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
90.92 Standard to be revised
Non-destructive testing — Image quality of radiographs — Part 2: Determination of the image quality value using step/hole-type image quality indicators
90.93 Standard confirmed
Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes
90.92 Standard to be revised
Non-destructive testing — Image quality of radiographs — Part 4: Experimental evaluation of image quality values and image quality tables
90.93 Standard confirmed
Non-destructive testing — Image quality of radiographs — Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
90.93 Standard confirmed
Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels
90.92 Standard to be revised
Non-destructive testing — Ultrasonic testing — Specification for a calibration block for phased array testing (PAUT)
90.93 Standard confirmed
Non-destructive testing — Acoustic emission testing — Steel structures of overhead travelling cranes and portal bridge cranes
90.93 Standard confirmed
Non-destructive testing — Equipment for eddy current examination — Array probe characteristics and verification
90.93 Standard confirmed
Non-destructive testing — Leak testing — Calibration of reference leaks for gases
90.60 Close of review
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
90.92 Standard to be revised
Non-destructive testing — Pulsed eddy current testing of ferromagnetic metallic components
90.60 Close of review
Non-destructive testing — Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays — Part 1: Tangential radiographic inspection
90.92 Standard to be revised
Non-destructive testing — Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays — Part 2: Double wall radiographic inspection
90.92 Standard to be revised
Non-destructive testing — Qualification of personnel for limited application of non-destructive testing
90.93 Standard confirmed
Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction
90.20 Standard under periodical review
Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments
60.60 Standard published
Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes
60.60 Standard published
Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 3: Combined equipment
60.60 Standard published
Non-destructive testing — Infrared thermographic testing — General principles for thermoelastic stress measuring method
60.60 Standard published
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
90.92 Standard to be revised
Non-destructive testing — Gamma ray scanning method on process columns
60.60 Standard published
Non-destructive testing — Ultrasonic testing with arrays — Vocabulary
60.60 Standard published
Non-destructive testing of welds — Penetrant testing — Acceptance levels
90.93 Standard confirmed
Non-destructive testing of welds — Magnetic particle testing — Acceptance levels
90.93 Standard confirmed
Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
90.92 Standard to be revised
Non-destructive testing — Ultrasonic testing — General use of full matrix capture/total focusing technique (FMC/TFM) and related technologies
60.60 Standard published
Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
90.92 Standard to be revised
Non-destructive testing — Acoustic emission testing — Metallic pressure equipment
60.60 Standard published
Non-destructive testing — Acoustic emission testing — Detection of corrosion at atmospheric and low-pressure metallic storage tank floors
60.60 Standard published
Non-destructive testing — Metal magnetic memory — Part 1: Vocabulary and general requirements
60.60 Standard published
Non-destructive testing — Metal magnetic memory — Part 2: Inspection of welded joints
60.60 Standard published
Non-destructive testing — Acoustic emission testing — Verification of the receiving sensitivity spectra of piezoelectric acoustic emission sensors
60.60 Standard published
Non-destructive testing — Robotic ultrasonic test systems — General requirements
60.60 Standard published
Titanium pipes and tubes — Non-destructive testing — Part 1: Eddy-current examination
90.93 Standard confirmed
Titanium pipes and tubes — Non-destructive testing — Part 2: Ultrasonic testing for the detection of longitudinal imperfections
90.93 Standard confirmed
Non-destructive testing — Metallographic replica techniques of surface examination
90.93 Standard confirmed
Non-destructive testing — Aids to visual inspection — Selection of low-power magnifiers
90.93 Standard confirmed
Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions
90.92 Standard to be revised
Non-destructive testing — Characteristics of focal spots in industrial X-ray systems — Part 1: Pinhole camera radiographic method
60.60 Standard published
Non-destructive testing — Radiographic testing — Determination of the size of industrial radiographic gamma sources
60.60 Standard published
Non-destructive testing — Penetrant testing — Part 1: General principles
60.60 Standard published
Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials
60.60 Standard published
Non-destructive testing — Penetrant testing — Part 3: Reference test blocks
90.92 Standard to be revised
Non-destructive testing — Penetrant testing — Part 4: Equipment
90.60 Close of review
Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 degrees C
90.93 Standard confirmed
Non-destructive testing — Penetrant testing — Part 6: Penetrant testing at temperatures lower than 10 degrees C
90.93 Standard confirmed
Non-destructive testing of welds — Phased array ultrasonic testing (UT-PA) for thin-walled steel components — Acceptance levels
60.60 Standard published
Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
60.60 Standard published
Non-destructive testing — Industrial X-ray and gamma-ray radiology — Vocabulary
90.92 Standard to be revised
Non-destructive testing — Ultrasonic testing — Vocabulary
90.92 Standard to be revised
Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules
90.60 Close of review
Non-destructive testing — Industrial radiographic illuminators — Minimum requirements
60.60 Standard published
Railway infrastructure — Non-destructive testing on rails in track — Part 1: Requirements for ultrasonic testing and evaluation principles
60.60 Standard published
Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
60.60 Standard published
Implants for surgery — Non-destructive testing — Liquid penetrant inspection of metallic surgical implants
90.93 Standard confirmed
Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants
60.60 Standard published
Non-destructive testing — Qualification and certification of NDT personnel
60.60 Standard published
Non-destructive testing — Magnetic particle testing — Part 1: General principles
90.93 Standard confirmed
Non-destructive testing — Magnetic particle testing — Part 2: Detection media
90.93 Standard confirmed
Non-destructive testing — Magnetic particle testing — Part 3: Equipment
90.93 Standard confirmed
Additive manufacturing of metals — Non-destructive testing and evaluation — Defect detection in parts
60.60 Standard published
Additive manufacturing — Non-destructive testing — Intentionally seeding flaws in metallic parts
60.60 Standard published
Non-destructive testing — Methods for absolute calibration of acoustic emission transducers by the reciprocity technique
60.60 Standard published
Non-destructive testing — Performance-based qualification
90.93 Standard confirmed
Non-destructive testing — Automated ultrasonic testing — Selection and application of systems
90.60 Close of review
Non-destructive testing — General terms and definitions
90.92 Standard to be revised
Non-destructive testing — Discontinuities in specimens for use in qualification examinations
90.93 Standard confirmed
Non-destructive testing — NDT personnel training organizations
90.92 Standard to be revised
