98/37/EC

Machinery

This web page provides you with updated information on the European standard supporting the implementation of EU Directives and regulations. It provides, on one hand the information corresponding to the real-time status of the standards provided by CEN and CENELEC and, on the other hand, provides updated information about the status of the standards in support of the European legislation. It may happen that a standard is withdrawn by the standardisation body and remains applicable in the context of the EU legislation, unless the reference is withdrawn from the official journal.

"DISCLAIMER: This is an informative page, providing added value information on standards. Information may evolve and change subject to the publication of other legislative texts. This page has no legal validity and only informative value. Genorma.com informs its users that users of this platform are responsible for deciding the version of the standard that is applicable to their products, and not Genorma.com. As a consequence, Genorma.com users are encouraged to check the latest versions of the legal text accessible through the EUR-LEX website or the Website of the European Commission"

0 - Draft standards 382 - View all published standards related to this directive 1322 - Withdrawn standards

Harmonised Standards or standards supporting the application of the EU legislation

Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of industrial trucks - Driverless trucks and their systems

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of packaging machines - Part 7: Group and secondary packaging machines

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of packaging machines - Part 5: Wrapping machines

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Food processing machinery - Baguette slicers - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Bulk milk coolers on farms - Requirements for construction, performance, suitability for use, safety and hygiene

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Clipping machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005)

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Liquid pumps - Safety requirements - Agrifoodstuffs equipment ; Design rules to ensure hygiene in use

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Bulk milk coolers on farms - Requirements for construction, performance, suitability for use, safety and hygiene

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Safety of machinery - Safety requirements for pressure metal diecasting units

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Mixing machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Salad dryers - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Internal blinds - Performance requirements including safety

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

External blinds - Performance requirements including safety

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws

90.93 Standard confirmed

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors

90.60 Close of review

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Earth-moving machinery - Access systems (ISO 2867:2006)

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Earth-moving machinery - Safety - Part 12: Requirements for cable excavators

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Shutters - Performance requirements including safety

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages

99.60 Withdrawal effective

C 246 Official journal reference
Oct 5, 2005 Official journal publication date

Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005)

90.93 Standard confirmed

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Chop cutting machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory

90.93 Standard confirmed

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines

90.93 Standard confirmed

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Basic concepts - Part 2: Hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Footwear manufacturing machines - Lasting machines - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance

90.92 Standard to be revised

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008)

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Earth-moving machinery - Safety - Part 1: General requirements

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Earth-moving machinery - Safety - Part 8: Requirements for graders

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Earth-moving machinery - Safety - Part 7: Requirements for scrapers

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Earth-moving machinery - Safety - Part 3: Requirements for loaders

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements

90.60 Close of review

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995)

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996)

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008)

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2005)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005)

90.93 Standard confirmed

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005)

90.93 Standard confirmed

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Food processing machinery - Mincing machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Circular saw machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Band saw machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Vegetable peelers - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Beam mixers - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Petrol filling stations - Safety requirements for the construction of submersible pump assemblies

90.93 Standard confirmed

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)

90.93 Standard confirmed

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005)

90.93 Standard confirmed

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005)

90.93 Standard confirmed

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)

90.93 Standard confirmed

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

90.93 Standard confirmed

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays

90.93 Standard confirmed

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators

90.93 Standard confirmed

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements

90.93 Standard confirmed

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces

99.60 Withdrawal effective

C 377 Official journal reference
Dec 31, 1994 Official journal publication date

Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2001)

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:1998)

99.60 Withdrawal effective

C 165 Official journal reference
Jun 11, 1999 Official journal publication date

Laser and laser-related equipment - Laser device - Mechanical interfaces (ISO 11253:1993)

99.60 Withdrawal effective

C 377 Official journal reference
Dec 31, 1994 Official journal publication date

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:1993)

99.60 Withdrawal effective

C 377 Official journal reference
Dec 31, 1994 Official journal publication date

Optics and optical instruments - Lasers and laser related equipment - Vocabulary and symbols (ISO 11145:1994)

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Safety of machinery - Laser processing machines - Safety requirements (ISO 11553:1996 modified)

99.60 Withdrawal effective

C 169 Official journal reference
Jun 4, 1997 Official journal publication date

Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces

99.60 Withdrawal effective

C 110 Official journal reference
Apr 15, 2000 Official journal publication date

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety of machinery - System of auditory and visual danger and information signals

99.60 Withdrawal effective

C 141 Official journal reference
May 8, 1997 Official journal publication date

Basic human body measurements for technological design (ISO 7250:1996)

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002)

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Safety of machinery - Visual danger signals - General requirements, design and testing

99.60 Withdrawal effective

C 359 Official journal reference
Nov 28, 1996 Official journal publication date

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Safety of machinery - Human physical performance - Part 1: Terms and definitions

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Safety of machinery - Human body measurements - Part 3: Anthropometric data

99.60 Withdrawal effective

C 93 Official journal reference
Mar 22, 1997 Official journal publication date

Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings

99.60 Withdrawal effective

C 93 Official journal reference
Mar 22, 1997 Official journal publication date

Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery

99.60 Withdrawal effective

C 93 Official journal reference
Mar 22, 1997 Official journal publication date

Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of machinery - Auditory danger signals - General requirements, design and testing (ISO 7731:1986, modified)

99.60 Withdrawal effective

C 229 Official journal reference
Aug 25, 1993 Official journal publication date

Conveyor belts for general purpose use - Electrical and flammability safety requirements

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Food processing machinery - Basic concepts - Part 2: Hygiene requirements

99.60 Withdrawal effective

C 322 Official journal reference
Oct 23, 1997 Official journal publication date

Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Food processing machinery - Food processors and blenders - Safety and hygiene requirements

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Food processing machinery - Intermediate provers - Safety and hygiene requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Food processing machinery - Pie and tart machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Pasta processing plants - Dryers and coolers - Safety and hygiene requirements

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Pasta processing plants - Pasta presses - Safety and hygiene requirements

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Food processing machinery - Slicing machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Food processing machinery - Rotary rack ovens - Safety and hygiene requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Food processing machinery - Moulders - Safety and hygiene requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Food processing machinery - Planetary mixers - Safety and hygiene requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Food processing machinery - Dough mixers - Safety and hygiene requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment

90.60 Close of review

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment

90.60 Close of review

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment

90.60 Close of review

C 167 Official journal reference
Jun 16, 2000 Official journal publication date

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases

99.60 Withdrawal effective

C 169 Official journal reference
Jun 4, 1997 Official journal publication date

Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems

99.60 Withdrawal effective

C 169 Official journal reference
Jun 4, 1997 Official journal publication date

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment

99.60 Withdrawal effective

C 169 Official journal reference
Jun 4, 1997 Official journal publication date

Piling equipment - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Earth-moving machinery - Safety - Part 1: General requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Floor cutting-off machines - Safety

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Piling equipment - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:1992 modified)

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified)

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Piling equipment - Safety requirements

99.60 Withdrawal effective

C 165 Official journal reference
Jun 11, 1999 Official journal publication date

Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope (ISO 3411:1995)

99.60 Withdrawal effective

C 318 Official journal reference
Nov 5, 1999 Official journal publication date

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995)

99.60 Withdrawal effective

C 318 Official journal reference
Nov 5, 1999 Official journal publication date

Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)

99.60 Withdrawal effective

C 318 Official journal reference
Nov 5, 1999 Official journal publication date

Earth-moving machinery - Safety - Part 1: General requirements

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Ceramic machines - Safety - Transfer platforms and cars

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Highway maintenance machines - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Winter service machines - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Road surface treatment machines - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines for road surface cleaning - Safety requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Concrete compactors and smoothing machines - Safety

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Conveying, spraying and placing machines for concrete and mortar - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Earth-moving machinery - Access systems (ISO 2867:1994)

99.60 Withdrawal effective

C 346 Official journal reference
Nov 14, 1998 Official journal publication date

Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996)

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Earth-moving machinery - Seat belts and seat belt anchorages (ISO 6683:1981 + Amendment 1:1990)

99.60 Withdrawal effective

C 318 Official journal reference
Nov 5, 1999 Official journal publication date

Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986 including Amendment 1:1989)

99.60 Withdrawal effective

C 229 Official journal reference
Aug 8, 1996 Official journal publication date

Earth-moving machinery - Guards and shields - Definitions and specifications (ISO 3457:1986)

99.60 Withdrawal effective

C 229 Official journal reference
Aug 8, 1996 Official journal publication date

Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:1994, including Amendment 1:1997 modified)

99.60 Withdrawal effective

C 167 Official journal reference
Jun 16, 2000 Official journal publication date

Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Cranes - Safety - Design - Requirements for equipment - Part 1: Electrotechnical equipment

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Portable, hand-held, internal combustion cutting-off machines - Safety

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Masonry and stone cutting-off machines for job site - Safety

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Tunnelling machines - Air locks - Safety requirements

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Earth-moving machinery - Safety - Part 8: Requirements for graders

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Earth-moving machinery - Safety - Part 7: Requirements for scrapers

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Earth-moving machinery - Safety - Part 3: Requirements for loaders

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Mobile road construction machinery - Safety - Part 5: Specific requirements for joint cutters

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Mobile road construction machinery - Safety - Part 3: Specific requirements for soil stabilization machines

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Core drilling machines on stand - Safety

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock

99.60 Withdrawal effective

C 93 Official journal reference
Mar 22, 1997 Official journal publication date

Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Road construction machines - Asphalt mixing plants - Safety requirements

99.60 Withdrawal effective

C 318 Official journal reference
Nov 5, 1999 Official journal publication date

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Mobile road construction machinery - Safety - Part 1: Common requirements

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Drill rigs - Safety

99.60 Withdrawal effective

C 229 Official journal reference
Aug 8, 1996 Official journal publication date

Piling equipment - Safety requirements

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Earth-moving machinery - Safety - Part 1: General requirements

99.60 Withdrawal effective

C 377 Official journal reference
Dec 31, 1994 Official journal publication date

Safety of industrial trucks - Test methods for measuring vibration

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Safety of industrial trucks - Pedestrian propelled trucks - Part 4: Scissor lift pallet-trucks

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of industrial trucks - Test methods for measuring noise emissions

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks

99.60 Withdrawal effective

C 183 Official journal reference
Jun 13, 1999 Official journal publication date

Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety of industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N - Part 1: General requirements

99.60 Withdrawal effective

C 252 Official journal reference
Sep 2, 2000 Official journal publication date

Safety of industrial trucks - Pedestrian propelled trucks - Part 1: Stacker trucks

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of industrial trucks - Pedestrian propelled trucks - Part 2: Pallet trucks

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of industrial trucks - Additional requirements for automated functions on trucks

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Safety of industrial trucks - Self-propelled variable reach trucks

99.60 Withdrawal effective

C 252 Official journal reference
Sep 2, 2000 Official journal publication date

Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Rail dependent storage and retrieval equipment - Safety requirements

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Rail dependent storage and retrieval equipment - Safety

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Rail dependent storage and retrieval equipment - Safety

99.60 Withdrawal effective

C 359 Official journal reference
Nov 28, 1996 Official journal publication date

Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Cranes - Power driven winches and hoists - Part 1: Power driven winches

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Cranes - Manually controlled load manipulating devices

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Cranes - Access

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Cranes - Safety - Non-fixed load lifting attachments

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Cranes - Safety - Hand powered lifting equipment

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Cranes - Loader cranes

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Cranes - Offshore cranes - Part 1: General - purpose offshore cranes

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Cranes - Safety - Tower cranes

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Cranes - Mobile cranes

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Cranes - Information for use and testing - Part 2: Marking

99.60 Withdrawal effective

C 142 Official journal reference
May 20, 2000 Official journal publication date

Cranes - Information for use and testing - Part 1: Instructions

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices

99.60 Withdrawal effective

C 165 Official journal reference
Jun 11, 1999 Official journal publication date

Cranes - Controls and control stations

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Cranes - Equipment - Part 2: Non-electrotechnical equipment

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)

90.93 Standard confirmed

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001)

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)

90.93 Standard confirmed

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)

90.93 Standard confirmed

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001)

90.93 Standard confirmed

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)

90.93 Standard confirmed

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)

99.60 Withdrawal effective

C 183 Official journal reference
Jun 13, 1998 Official journal publication date

Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)

99.60 Withdrawal effective

C 183 Official journal reference
Jun 13, 1998 Official journal publication date

Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)

99.60 Withdrawal effective

C 183 Official journal reference
Jun 13, 1998 Official journal publication date

Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)

99.60 Withdrawal effective

C 183 Official journal reference
Jun 13, 1998 Official journal publication date

Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)

99.60 Withdrawal effective

C 183 Official journal reference
Jun 13, 1998 Official journal publication date

Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)

99.60 Withdrawal effective

C 183 Official journal reference
Jun 13, 1998 Official journal publication date

Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001)

90.93 Standard confirmed

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety requirements for dry-cleaning machines using perchloroethylene (ISO 8230:1997)

99.60 Withdrawal effective

C 183 Official journal reference
Jun 13, 1998 Official journal publication date

Safety requirements for textile machinery (ISO 11111:1995)

99.60 Withdrawal effective

C 229 Official journal reference
Aug 8, 1996 Official journal publication date

Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections (ISO 11204:1995)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and other specified positions (ISO 11200:1995)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999)

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)

99.60 Withdrawal effective

C 141 Official journal reference
May 8, 1997 Official journal publication date

Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections (ISO 11204:1995)

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995)

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and other specified positions (ISO 11200:1995)

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)

99.60 Withdrawal effective

C 141 Official journal reference
May 8, 1997 Official journal publication date

Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)

99.60 Withdrawal effective

C 359 Official journal reference
Nov 28, 1996 Official journal publication date

Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994)

99.60 Withdrawal effective

C 229 Official journal reference
Aug 8, 1996 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurements at discrete points (ISO 9614-1:1993)

99.60 Withdrawal effective

C 229 Official journal reference
Aug 8, 1996 Official journal publication date

Acoustics - Measurement procedures for ducted silencers - Insertion loss, flow noise and total pressure loss (ISO 7235:1991)

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Acoustics - Determination of sound power radiated into a duct by fans - In-duct method (ISO 5136:1990 and Technical Corrigendum 1:1993)

99.60 Withdrawal effective

C 377 Official journal reference
Dec 31, 1994 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method for use in situ (ISO 3747:2000)

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995)

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994)

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Acoustics - Determination of sound power levels of noise sources - Precision method for discrete-frequency and narrow-band sources in reverberation rooms (ISO 3742:1988)

99.60 Withdrawal effective

C 229 Official journal reference
Aug 25, 1993 Official journal publication date

Acoustics - Determination of sound power levels of noise sources - Precision methods for broad-band sources in reverberation rooms (ISO 3741:1988)

99.60 Withdrawal effective

C 229 Official journal reference
Aug 25, 1993 Official journal publication date

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995)

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)

99.60 Withdrawal effective

C 141 Official journal reference
May 8, 1997 Official journal publication date

Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters

90.93 Standard confirmed

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Conveyor belts for use in underground installations - Electrical and flammability safety requirements

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of industrial trucks - Self-propelled variable reach trucks

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of machinery - Interlocking devices associated with guards - Principles for design and selection

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests

90.60 Close of review

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements

90.60 Close of review

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Plastics and rubber machines - Presses - Safety requirements

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of machinery - Two-hand control devices - Functional aspects - Principles for design

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

90.93 Standard confirmed

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel

90.92 Standard to be revised

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Dock levellers

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Lifting platforms - Mast climbing work platforms

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety requirements for lifting tables

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Lifting platforms - Mast climbing work platforms

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Safety requirements on Suspended Access Equipment - Design calculations, stability criteria, construction - Tests

99.60 Withdrawal effective

C 318 Official journal reference
Nov 5, 1999 Official journal publication date

Mobile or movable Jacks and associated lifting equipment

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Dock levellers

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Vehicle lifts

99.60 Withdrawal effective

C 165 Official journal reference
Jun 11, 1999 Official journal publication date

Safety of machinerie - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Cranes - General design - Part 2: Load actions

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Cranes - General design - Part 1: General principles and requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of packaging machines - Part 6: Pallet wrapping machines

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of packaging machines - Part 4: Palletisers and depalletisers

90.92 Standard to be revised

C 169 Official journal reference
Jun 4, 1997 Official journal publication date

Safety of packaging machines - Part 3: Form, fill and seal machines

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Packaging machines safety - Part 2: Pre-formed rigid container packaging machines

90.92 Standard to be revised

C 142 Official journal reference
May 20, 2000 Official journal publication date

Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements

90.93 Standard confirmed

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Rubber and plastics machines - Injection moulding machines - Safety requirements

99.60 Withdrawal effective

C 142 Official journal reference
May 20, 2000 Official journal publication date

Plastics and rubber machines - Presses - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Rubber and plastics machines - Internal mixers - Safety requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Rubber and plastics machines - Winding machines for film or sheet - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Rubber and plastics machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Rubber and plastics machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Rubber and plastics machines - Thermoforming machines - Safety requirements

99.60 Withdrawal effective

C 110 Official journal reference
Apr 15, 2000 Official journal publication date

Rubber and plastics machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Rubber and plastic machines - Calenders - Safety requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Rubber and plastics machines - Size reduction machines - Part 1: Safety requirements for blade granulators

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Rubber and plastics machines - Safety - Blow moulding machines intended for the production of hollow articles - Requirements for the design and construction

99.60 Withdrawal effective

C 229 Official journal reference
Aug 8, 1996 Official journal publication date

Rubber and plastics machines - Two roll mills - Safety requirements

99.60 Withdrawal effective

C 93 Official journal reference
Mar 22, 1997 Official journal publication date

Rubber and plastics machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders

99.60 Withdrawal effective

C 141 Official journal reference
May 8, 1997 Official journal publication date

Rubber and plastics machines - Injection moulding machines - Safety requirements

99.60 Withdrawal effective

C 169 Official journal reference
Jun 4, 1997 Official journal publication date

Rubber and plastics machinery - Compression and transfer moulding presses - Safety requirements for the design

99.60 Withdrawal effective

C 207 Official journal reference
Jul 27, 1994 Official journal publication date

Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Garden-equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Garden equipment - Powered lawnmowers - Safety

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Agricultural machinery - Soil working machines with powered tools - Safety

99.60 Withdrawal effective

C 167 Official journal reference
Jun 16, 2000 Official journal publication date

Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitter

99.60 Withdrawal effective

C 110 Official journal reference
Apr 15, 2000 Official journal publication date

Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters

99.60 Withdrawal effective

C 165 Official journal reference
Jun 11, 1999 Official journal publication date

Agricultural machinery - Agricultural self-propelled, mounted, semi-mounted and trailed machines - Common safety requirements

99.60 Withdrawal effective

C 110 Official journal reference
Apr 15, 2000 Official journal publication date

Forest machinery - Self propelled machinery - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Machinery for agriculture and forestry - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety

99.60 Withdrawal effective

C 110 Official journal reference
Apr 15, 2000 Official journal publication date

Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety

99.60 Withdrawal effective

C 252 Official journal reference
Sep 2, 2000 Official journal publication date

Garden equipment - Hand held, integrally powered hedge trimmers - Safety

99.60 Withdrawal effective

C 141 Official journal reference
May 8, 1997 Official journal publication date

Garden equipment - Hand-held, integrally powered hedge trimmers - Safety

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Garden equipment - Hand held, integrally powered hedge trimmers - Safety

99.60 Withdrawal effective

C 322 Official journal reference
Oct 23, 1997 Official journal publication date

Garden equipment - Powered lawnmowers - Safety

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Garden equipment - Powered lawnmowers - Safety

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Forestry machinery - Wood chippers - Safety

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000)

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:1998)

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Agricultural machinery - Potato harvesting equipment - Safety

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 4: Symbols for forestry machinery (ISO 3767-4:1993)

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety requirements for lifting tables

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 5: Symbols for manual portable forestry machinery (ISO 3767-5:1992)

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 3: Symbols for powered lawn and garden equipment (ISO 3767-3:1995)

99.60 Withdrawal effective

C 141 Official journal reference
May 8, 1997 Official journal publication date

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 2: Symbols for agricultural tractors and machinery (ISO 3767-2:1991)

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 1: Common symbols (ISO 3767-1:1991)

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Agricultural and forestry machinery - Inter-row mowing units - Safety

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Agricultural machinery - Front loaders - Safety

99.60 Withdrawal effective

C 142 Official journal reference
May 20, 2000 Official journal publication date

Agricultural and forestry machinery - Solid fertilizer distributors - Safety

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and strength tests

99.60 Withdrawal effective

C 165 Official journal reference
Jul 1, 1995 Official journal publication date

Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety

99.60 Withdrawal effective

C 165 Official journal reference
Jun 11, 1999 Official journal publication date

Agricultural machinery - Silage cutters - Safety

99.60 Withdrawal effective

C 229 Official journal reference
Aug 8, 1996 Official journal publication date

Agricultural and forestry machinery - Reel machines for irrigation - Safety

99.60 Withdrawal effective

C 165 Official journal reference
Jun 11, 1999 Official journal publication date

Agricultural machinery - Trailers with tipping body - Safety

99.60 Withdrawal effective

C 318 Official journal reference
Nov 5, 1999 Official journal publication date

Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Safety

99.60 Withdrawal effective

C 322 Official journal reference
Oct 23, 1997 Official journal publication date

Agricultural machinery - Soil working machines with powered tools - Safety

99.60 Withdrawal effective

C 141 Official journal reference
May 8, 1997 Official journal publication date

Agricultural machinery - Pick-up balers - Safety

99.60 Withdrawal effective

C 165 Official journal reference
Jun 11, 1999 Official journal publication date

Agricultural machinery - Manure spreaders - Safety

99.60 Withdrawal effective

C 165 Official journal reference
Jul 1, 1995 Official journal publication date

Agricultural machinery - Slurry tankers - Safety

99.60 Withdrawal effective

C 318 Official journal reference
Nov 5, 1999 Official journal publication date

Agricultural machinery - Vine shoot tipping machines - Safety

99.60 Withdrawal effective

C 93 Official journal reference
Mar 22, 1997 Official journal publication date

Agricultural machinery - Rotary mowers and flail-mowers - Safety

99.60 Withdrawal effective

C 165 Official journal reference
Jun 11, 1999 Official journal publication date

Agricultural machinery - Silos stationary unloaders for round silos - Safety

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety

99.60 Withdrawal effective

C 322 Official journal reference
Oct 23, 1997 Official journal publication date

Agricultural machinery - Combine harvesters and forage harvesters - Safety

99.60 Withdrawal effective

C 229 Official journal reference
Aug 8, 1996 Official journal publication date

Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997)

99.60 Withdrawal effective

C 322 Official journal reference
Oct 23, 1997 Official journal publication date

Garden equipment - Hand held, integrally powered hedge trimmers - Safety

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Agricultural and forestry machinery - Portable chain saws - Safety

99.60 Withdrawal effective

C 377 Official journal reference
Dec 31, 1994 Official journal publication date

Garden equipment - Powered lawnmowers - Safety

99.60 Withdrawal effective

C 169 Official journal reference
Jun 4, 1997 Official journal publication date

Machine tools - Safety - Sawing machines for cold metal

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machine tools - Transfer and special purpose machines

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machine tools - Drilling machines

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of machine tools - Milling machines (including boring machines)

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of machine tools - Manually controlled turning machines with or without automatic control

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Machine tools - Safety - Multi-spindle automatic turning machines

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Machine-tools safety - Safety requirements for the design and construction of work holding chucks

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Machine tools - Safety - Stationary grinding machines

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Machine tools - Safety - Machining centres

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of machine tools - Pneumatic presses

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Safety of machine tools - Large numerically controlled turning machines and turning centres

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety of machine tools - Small numerically controlled turning machines and turning centres

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Machine tools - Safety - Guillotine shears

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Safety of machine tools - Hydraulic press brakes

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Machine tools - Safety - Hydraulic presses

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Mechanical presses - Safety

99.60 Withdrawal effective

C 38 Official journal reference
Feb 5, 1998 Official journal publication date

Machine tools - Safety - Electro Discharge Machines

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of woodworking machines - Combined woodworking machines

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or fed by chain

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of woodworking machines - Four-sided moulding machines

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines

99.60 Withdrawal effective

C 110 Official journal reference
Apr 15, 2000 Official journal publication date

Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle handfed/integrated fed routing machines

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 2: Horizontal beam panel saws and vertical panel saws

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table) and dimension saws

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety of woodworking machines - Surface planing and thicknessing machines

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Safety of woodworking machines - One side thickness planing machines

99.60 Withdrawal effective

C 322 Official journal reference
Oct 23, 1997 Official journal publication date

Safety of woodworking machines - Handfed surface planing machines

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety of woodworking machines - Combined woodworking machines

99.60 Withdrawal effective

C 322 Official journal reference
Oct 23, 1997 Official journal publication date

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

90.60 Close of review

C 309 Official journal reference
Dec 18, 2009 Official journal publication date

Safety of woodworking machines - Band sawing machines

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods

90.93 Standard confirmed

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006)

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Conveyor belts for use in underground installations - Electrical and flammability safety requirements

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or fed by chain

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of packaging machines - Part 7: Group and secondary packaging machines

90.93 Standard confirmed

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)

90.60 Close of review

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Cranes - Requirements for container handling spreaders

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Cranes - Non-fixed load lifting attachments

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Noise test code for foundry machines and equipment

99.60 Withdrawal effective

C 110 Official journal reference
Apr 15, 2000 Official journal publication date

Foundry Machinery - Safety requirements for abrasive blasting equipment

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Safety requirements for foundry moulding and coremaking machinery and plant associated equipment

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Safety requirements for high pressure metal diecasting units

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Footwear manufacturing machines - Lasting machines - Safety requirements

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Footwear manufacturing machines - Footwear moulding machines - Safety requirements

99.60 Withdrawal effective

C 165 Official journal reference
Jun 11, 1999 Official journal publication date

Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Tannery machines - Rotating process vessels - Safety requirements

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Tannery machines - Roller coating machines - Safety requirements

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Tannery machines - Moving platen machinery - Safety requirements

90.93 Standard confirmed

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Tannery machines - Splitting and bandknife shearing machines - Safety requirements

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Tannery machines - Reciprocating roller machines - Safety requirements

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2004, including Cor 1:2006)

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005)

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Cranes - Loader cranes

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Safety rules for the construction and installation of escalators and passenger conveyors

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Food processing machinery - Mincing machines - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Agricultural machinery - Front loaders - Safety

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005)

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Industrial, commercial and garage doors and gates - Installation and use

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 7: Grinders

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Tunnelling machines - Air locks - Safety requirements

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006, including Cor 1:2007)

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)

60.60 Standard published

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004)

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006)

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Conveyor belts for general purpose use - Electrical and flammability safety requirements

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Plastics and rubber machines - Thermoforming machines - Safety requirements

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts

90.92 Standard to be revised

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Machine-tools safety - Safety requirements for the design and construction of work holding chucks

90.93 Standard confirmed

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Maintenance for lifts and escalators - Rules for maintenance instructions

90.93 Standard confirmed

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Machine tools - Safety - Stationary grinding machines

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Mobile road construction machinery - Safety - Part 1: Common requirements

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration

90.93 Standard confirmed

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation

90.93 Standard confirmed

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety of machinery - Noise test code for foundry machines and equipment

90.60 Close of review

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value

90.93 Standard confirmed

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening

90.93 Standard confirmed

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2006)

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety of escalators and moving walks - Part 1: Construction and installation

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Components for slings - Safety - Part 4: Links, Grade 8

90.93 Standard confirmed

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes

90.92 Standard to be revised

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Components for slings - Safety - Part 1: Forged steel components, Grade 8

90.60 Close of review

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use

90.92 Standard to be revised

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use

90.92 Standard to be revised

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines

90.93 Standard confirmed

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

90.93 Standard confirmed

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002)

60.60 Standard published

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997)

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000)

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Equipment and components intended for use in potentially explosive atmospheres in underground mines

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of machinery - Fire prevention and protection

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of machinery - Prevention of unexpected start-up

99.60 Withdrawal effective

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Safety of packaging machines - Part 8: Strapping machines

90.93 Standard confirmed

C 22 Official journal reference
Jan 28, 2009 Official journal publication date

Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Compressors and vacuum pumps - Safety requirements - Part 1: Compressors

99.60 Withdrawal effective

C 306 Official journal reference
Oct 15, 1996 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work (ISO 8662-5:1992/AM 1:1999)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 3: Rock drills and rotary hammers (ISO 8662-3:1992/AM 1:1999)

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers (ISO 8662-2:1992/AM 1:1999)

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Mechanical vibration - Testing of mobile machinery in order to determine the whole-body vibration emission value - General - Amendment 1

99.60 Withdrawal effective

C 165 Official journal reference
Jun 11, 1999 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears (ISO 8662-10:1998)

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work (ISO 8662-5:1992)

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 3: Rock drills and rotary hammers (ISO 8662-3:1992)

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Hand-held portable tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers (ISO 8662-2:1992)

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997)

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997)

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers (ISO 8662-14:1996)

99.60 Withdrawal effective

C 141 Official journal reference
May 8, 1997 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996)

99.60 Withdrawal effective

C 141 Official journal reference
May 8, 1997 Official journal publication date

Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997)

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action (ISO 8662-7:1997)

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills (ISO 8662-6:1994)

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work (ISO 8662-5:1992)

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994)

99.60 Withdrawal effective

C 229 Official journal reference
Aug 8, 1996 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 3: Rock drills and rotary hammers (ISO 8662-3:1992)

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers (ISO 8662-2:1992)

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Hand-arm vibration - Laboratory measurement of vibration at the grip surface of hand-guided machinery - General

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Mechanical vibration - Testing of mobile machinery in order to determine the whole-body vibration emission value - General

99.60 Withdrawal effective

C 93 Official journal reference
Mar 22, 1997 Official journal publication date

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992)

99.60 Withdrawal effective

C 42 Official journal reference
Feb 14, 1996 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 4: Safety of machines using halogenated solvents

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Coating plants - Combined booths - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Dryers and ovens, in which flammable substances are released - Safety requirements

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Coating plants - Spray booths for application of organic powder coating material - Safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Atomising and spraying equipment for coating materials - Safety requirements

99.60 Withdrawal effective

C 346 Official journal reference
Nov 14, 1998 Official journal publication date

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Reciprocating internal combustion engine driven generating sets - Safety

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997)

99.60 Withdrawal effective

C 78 Official journal reference
Mar 13, 1998 Official journal publication date

Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres

90.93 Standard confirmed

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust

90.93 Standard confirmed

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres

90.93 Standard confirmed

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines

99.60 Withdrawal effective

C 183 Official journal reference
Jun 13, 1998 Official journal publication date

Hand-held portable power tools - Measurement of vibrations at the handle - Part 1: General (ISO 8662-1:1988)

99.60 Withdrawal effective

C 377 Official journal reference
Dec 31, 1994 Official journal publication date

Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation

99.60 Withdrawal effective

C 169 Official journal reference
Jun 4, 1997 Official journal publication date

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

99.60 Withdrawal effective

C 104 Official journal reference
May 8, 2007 Official journal publication date

Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Cranes - Loader Cranes

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Pumps and pump units for liquids - Common safety requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machine tools - Small numerically controlled turning machines and turning centres

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Acoustics - Noise test code for fastener driving tools - Engineering method

99.60 Withdrawal effective

C 110 Official journal reference
Apr 15, 2000 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002)

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 7: Grinders

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Safety of Machinery - Safety requirements for cold flat rolling mills

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety of Machinery - Safety requirements for hot flat rolling mills

99.60 Withdrawal effective

C 74 Official journal reference
Mar 28, 2009 Official journal publication date

Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machine tools - Large numerically controlled turning machines and turning centres

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Machinery for forestry - Portable chain-saws - Safety requirements and testing - Part 2: Chain-saws for tree service - Amendment 1 (ISO 11681-2:1998/AM 1:2003)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines

99.60 Withdrawal effective

C 142 Official journal reference
May 20, 2000 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date

Liquid pumps - Safety requirements - Procedure for hydrostatic testing

99.60 Withdrawal effective

C 141 Official journal reference
Jun 14, 2002 Official journal publication date

Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy

99.60 Withdrawal effective

C 332 Official journal reference
Nov 27, 2001 Official journal publication date

Pumps and pump units for liquids - Common safety requirements

99.60 Withdrawal effective

C 317 Official journal reference
Oct 15, 1998 Official journal publication date

Screens for laser working places - Safety requirements and testing

99.60 Withdrawal effective

C 192 Official journal reference
Aug 14, 2003 Official journal publication date

Centrifuges - Common safety requirements

99.60 Withdrawal effective

C 165 Official journal reference
Jun 11, 1999 Official journal publication date

Manipulating industrial robots - Safety (ISO 10218:1992, modified)

99.60 Withdrawal effective

C 336 Official journal reference
Dec 31, 2005 Official journal publication date