Environmental influence testing methodology for operational deployments of European ABC systems
90.60 Close of review
Mediation Grammar - A testing methodology for measuring the empowerment of users of public services for migrants
60.60 Standard published
Advanced fatigue testing methods — Part 1: Self-heating measurements
60.60 Standard published
Advanced fatigue testing methods — Part 2: Stiffness method
60.60 Standard published
Unmanned aircraft systems — Counter UAS — Testing methodology
60.60 Standard published
Irrigation techniques - Automatic turf irrigation systems - Part 5: Testing methods of systems
90.93 Standard confirmed
Non destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods
90.60 Close of review
Glass in building - Safety in case of fire, fire resistance - Glass testing methodology for the purpose of classification
60.60 Standard published
Testing methodologies of refrigerating devices for insulated means of transport - Part 1: Mechanical cooling device with forced air circulation evaporator with or without heating device
90.93 Standard confirmed
Testing methodologies for refrigerating devices for insulated means of transport - Part 2: Eutectic cooling devices
60.60 Standard published
Hearing protectors - Guidance on selection of individual fit testing methods
60.60 Standard published
Testing methodology for wipers used in electrical insulating oil
90.93 Standard confirmed
Railway applications - Current collection systems - Pantographs, testing methods for contact strips
90.93 Standard confirmed
Railway applications - Current collection systems - Pantographs, testing methods for contact strips
60.60 Standard published
Efficiency of domestic electrical storage water heaters and testing methods
90.93 Standard confirmed
Efficiency of domestic electrical storage water heaters and testing methods
60.60 Standard published
Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
60.60 Standard published
Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
60.60 Standard published
Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials
60.60 Standard published
Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods
60.60 Standard published
Semiconductor devices - Mechanical and climatic test methods - Part 41: Standard reliability testing methods of non-volatile memory devices
60.60 Standard published
Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
60.60 Standard published
Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
60.60 Standard published
Semiconductor devices - Mechanical and climatic test methods - Part 41: Standard reliability testing methods of non-volatile memory devices
60.60 Standard published
Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
60.60 Standard published
Amendment 1 - Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
60.60 Standard published
Amendment 2 - Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
60.60 Standard published
Corrigendum 1 - Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
60.60 Standard published
Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
60.60 Standard published
Plasma display panels - Part 4-1: Environmental testing methods - Climatic and mechanical
60.60 Standard published
Plasma display panels - Part 4-2: Environmental testing methods - Panel strength
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 28: Performance testing method of vibration-driven MEMS electret energy harvesting devices
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials
60.60 Standard published
Organic light emitting diode (OLED) displays - Part 5: Environmental testing methods
60.60 Standard published
Railway applications - Current collection systems - Pantographs, testing methods for contact strips
60.60 Standard published
Flexible display devices - Part 6-2: Environmental testing methods
60.60 Standard published
Corrigendum 1 - Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
60.60 Standard published
Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
60.60 Standard published
Semiconductor devices - Flexible and stretchable semiconductor devices - Part 9: Performance testing methods of one transistor and one resistor (1T1R) resistive memory cells
60.60 Standard published
Electrical installations in ships - Electromagnetic compatibility - Optimising of cable installations on ships - Testing method of routing distance
60.60 Standard published
Electrical energy storage (EES) systems - Part 2-200: Unit parameters and testing methods - Case study of electrical energy storage (EES) systems located in EV charging station with PV
60.60 Standard published
Electrical energy storage (EES) systems – Part 2-201: Unit parameters and testing methods – Review of testing for battery energy storage systems (BESS) for the purpose of implementing repurpose and reuse batteries
60.60 Standard published
Electrical energy storage (EES) systems - Part 2-2: Unit parameters and testing methods - Application and performance testing
60.60 Standard published
Industrial automation systems and integration — Product data representation and exchange — Part 31: Conformance testing methodology and framework: General concepts
90.93 Standard confirmed
Industrial automation systems and integration — Product data representation and exchange — Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients
90.20 Standard under periodical review
Industrial automation systems and integration — Product data representation and exchange — Part 34: Conformance testing methodology and framework: Abstract test methods for application protocol implementations
90.93 Standard confirmed
Timber — Finger joints — Minimum production requirements and testing methods
90.20 Standard under periodical review
Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method
90.92 Standard to be revised
Air cargo equipment — Restraint straps — Part 1: Design criteria and testing methods
60.60 Standard published
Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece
60.60 Standard published
Testing methods for pervious concrete — Part 1: Infiltration rate
90.93 Standard confirmed
Testing methods for pervious concrete — Part 2: Density and void content
90.93 Standard confirmed
Testing methods for pervious concrete — Part 3: Resistance of surface degradation
60.60 Standard published
Fine ceramics (advanced ceramics, advanced technical ceramics) — Testing method for macro-heterogeneity in microstructure
90.93 Standard confirmed
Imaging materials and prints — Abrasion resistance — Part 1: General rub testing methods
60.60 Standard published
Clean cookstoves and clean cooking solutions — Field testing methods for cookstoves
90.60 Close of review
Metallic materials – Fatigue testing – Force controlled thermo-mechanical fatigue testing method
90.92 Standard to be revised
General specifications and testing methods for temperature-sensitive medicinal packages in good distribution practice principles
60.60 Standard published
Testing method for steel tyre cord — Part 1: General requirements
60.60 Standard published
Reactor technology — Nuclear fusion reactors — Hot helium leak testing method for high temperature pressure-bearing components in nuclear fusion reactors
60.60 Standard published
Information technology — Security techniques — Testing methods for the mitigation of non-invasive attack classes against cryptographic modules
60.60 Standard published
Information technology — Biometric data interchange formats — Part 1: Framework — Amendment 1: Conformance testing methodology
60.60 Standard published
Information technology — Biometric data interchange formats — Part 2: Finger minutiae data — Amendment 1: Conformance testing methodology and clarification of defects
60.60 Standard published
Information technology — Biometric data interchange formats — Part 4: Finger image data — Amendment 1: Conformance testing methodology and clarification of defects
60.60 Standard published
Information technology — Biometric data interchange formats — Part 5: Face image data — Amendment 1: Conformance testing methodology and clarification of defects
60.60 Standard published
Information technology — Biometric data interchange formats — Part 6: Iris image data — Amendment 1: Conformance testing methodology and clarification of defects
60.60 Standard published
Information technology — Biometric data interchange formats — Part 8: Finger pattern skeletal data — Amendment 1: Conformance testing methodology
60.60 Standard published
Information technology — Biometric data interchange formats — Part 9: Vascular image data — Amendment 1: Conformance testing methodology
60.60 Standard published
Information technology — Biometric performance testing and reporting — Part 2: Testing methodologies for technology and scenario evaluation
90.93 Standard confirmed
Information technology — Biometric performance testing and reporting — Part 2: Testing methodologies for technology and scenario evaluation — Amendment 1: Testing of multimodal biometric implementations
60.60 Standard published
Information technology — Biometric performance testing and reporting — Part 6: Testing methodologies for operational evaluation
90.93 Standard confirmed
Information security — Security requirements, test and evaluation methods for quantum key distribution — Part 2: Evaluation and testing methods
60.60 Standard published
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 10: Hand geometry silhouette data
90.93 Standard confirmed
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 1: Generalized conformance testing methodology
90.93 Standard confirmed
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 1: Generalized conformance testing methodology — Technical Corrigendum 1
60.60 Standard published
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 2: Finger minutiae data
90.93 Standard confirmed
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 4: Finger image data
90.93 Standard confirmed
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 4: Finger image data — Technical Corrigendum 1
60.60 Standard published
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 5: Face image data
90.93 Standard confirmed
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 6: Iris image data
90.93 Standard confirmed
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 7: Signature/sign time series data
90.93 Standard confirmed
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 8: Finger pattern skeletal data
90.93 Standard confirmed
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 9: Vascular image data
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Conformance testing methodology and framework — Part 1: General concepts
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Conformance testing methodology and framework — Part 2: Abstract Test Suite specification
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Conformance testing methodology and framework — Part 3: The Tree and Tabular Combined Notation (TTCN)
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Conformance testing methodology and framework — Part 4: Test realization
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Conformance testing methodology and framework — Part 5: Requirements on test laboratories and clients for the conformance assessment process
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Conformance testing methodology and framework — Part 6: Protocol profile test specification
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Conformance testing methodology and framework — Part 7: Implementation Conformance Statements
90.93 Standard confirmed
Information technology — Open Systems Interconnection — Conformance testing methodology and framework — Part 7: Implementation Conformance Statements — Technical Corrigendum 1
60.60 Standard published
Information technology — Text and office systems — Office Document Architecture (ODA) and interchange format — Technical Report on ISO 8613 implementation testing — Part 1: Testing methodology
90.93 Standard confirmed
Industrial automation systems and integration — Product data representation and exchange — Part 35: Conformance testing methodology and framework: Abstract test methods for standard data access interface (SDAI) implementations
90.93 Standard confirmed
