Main menu
Standards package "Road Marking Materials"
60.60 Standard published
Guidance on Factory Production Control for the CE Marking (Attestation of Conformity 2+) of designed masonry mortars
60.60 Standard published
Road marking materials - Conditions for removing/masking road markings
60.60 Standard published
Sealants for non-structural use in joints in buildings and pedestrian walkways - Guidance for CE marking and Declaration of Performance (DoP)
60.60 Standard published
Guidance on the application of CE marking and preparation of Declaration of Performance for sanitary appliances
60.60 Standard published
Bitumen and bituminous binders - Examples for CE Marking and Declaration of Performances (DoP)
60.60 Standard published
Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings
60.60 Standard published
Determination of the acoustic properties of markings - The CPX measurement method
60.60 Standard published
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking
90.60 Close of review
Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking
90.60 Close of review
Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
90.93 Standard confirmed
Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
60.60 Standard published
Cranes - Information for use and testing - Part 2: Marking
90.93 Standard confirmed
Road marking materials - Laboratory methods for identification
60.60 Standard published
Respiratory protective devices - Powered filtering devices incorporating a loose fitting respiratory interface - Requirements, testing, marking
60.60 Standard published
Respiratory protective devices - Powered filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking
60.60 Standard published
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler
60.60 Standard published
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
60.60 Standard published
Tanks for the transport of dangerous goods - Testing, inspection and marking of metallic tanks
90.60 Close of review
Intermodal Loading Units - Marking - Part 1: Markings for identification
90.93 Standard confirmed
Intermodal Loading Units - Marking - Part 1: Markings for identification
60.60 Standard published
Intermodal Loading Units - Marking - Part 2: Markings of swap bodies related to rail operation
90.93 Standard confirmed
Intermodal Loading Units - Marking - Part 3: Markings of semi-trailers related to rail operation
90.93 Standard confirmed
Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity
90.93 Standard confirmed
Vinegar - Product made from liquids of agricultural origin - Definitions, requirements, marking
90.93 Standard confirmed
Vinegar - Product made from liquids of agricultural origin - Definitions, requirements, marking
60.60 Standard published
Acetic acid food grade - Product made from materials of non-agricultural origin - Definitions, requirements, marking
90.93 Standard confirmed
Acetic acid food grade - Product made from materials of non-agricultural origin - Definitions, requirements, marking
60.60 Standard published
Road marking materials - Requirements for factory production control
90.60 Close of review
Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking
90.60 Close of review
Respiratory protective devices - Full face masks - Requirements, testing, marking
90.20 Standard under periodical review
Respiratory protective devices - Full face masks - Requirements, testing, marking
60.60 Standard published
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking
90.92 Standard to be revised
Textiles - Solar UV protective properties - Part 2: Classification and marking of apparel
90.93 Standard confirmed
Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape - Requirements, testing, marking
60.60 Standard published
Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking
90.93 Standard confirmed
Grouts for ceramic tiles - Part 1: Requirements, classification, designation, marking and labelling
60.60 Standard published
Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking
90.60 Close of review
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
90.93 Standard confirmed
Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking
90.92 Standard to be revised
Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking
60.60 Standard published
Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking
90.93 Standard confirmed
Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
90.92 Standard to be revised
Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
60.60 Standard published
Respiratory protective devices - Particle filters - Requirements, testing, marking
60.60 Standard published
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
90.93 Standard confirmed
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
60.60 Standard published
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
60.60 Standard published
Wood flooring and parquet - Characteristics, evaluation of conformity and marking
60.60 Standard published
Road marking materials - Road marking performance for road users and test methods
90.60 Close of review
Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
60.60 Standard published
Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking
90.92 Standard to be revised
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking
90.60 Close of review
Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking
90.93 Standard confirmed
Respiratory protective devices - Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type - Requirements, testing, marking
60.60 Standard published
Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking
90.60 Close of review
Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking
90.60 Close of review
Road marking materials - Retroreflecting road studs - Part 1: Initial performance requirements
60.60 Standard published
Road marking materials - Retroreflecting road studs - Part 2: Road test performance specifications
60.60 Standard published
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking
90.60 Close of review
Solid wood panelling and cladding - Characteristics, requirements and marking
90.93 Standard confirmed
Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking
90.60 Close of review
Facility Management - Part 7: Guidelines for Performance Benchmarking
90.92 Standard to be revised
Pellet burners for small heating boilers - Definitions, requirements, testing, marking
90.60 Close of review
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 5: Assessment and verification of constancy of performance, marking and labelling
90.93 Standard confirmed
Railway applications - Marking on railway vehicles - Part 1: Freight wagons
60.60 Standard published
Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines
90.92 Standard to be revised
Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools
90.92 Standard to be revised
Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units
60.60 Standard published
Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking
90.93 Standard confirmed
Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
90.93 Standard confirmed
Flooring of lignified materials other than wood - Characteristics, assessment and verification of constancy of performance and marking
90.20 Standard under periodical review
Leather - Description, labelling and marking of leather goods
60.60 Standard published
High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking
60.60 Standard published
Grease separators - Part 1: Principles of design, performance and testing, marking and quality control
90.93 Standard confirmed
Grease separators - Part 1: Principles of design, performance and testing, marking and quality control
60.60 Standard published
Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
90.93 Standard confirmed
Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties
60.60 Standard published
Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing and marking
90.60 Close of review
Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking
90.93 Standard confirmed
Aerospace series - Marking of parts and assemblies other than engines - Indications on drawings
90.93 Standard confirmed
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
90.60 Close of review
Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking
90.60 Close of review
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
60.60 Standard published
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking
90.92 Standard to be revised
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
90.93 Standard confirmed
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
60.60 Standard published
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking
60.60 Standard published
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
90.92 Standard to be revised
Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables
60.60 Standard published
Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking
90.60 Close of review
Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking
90.93 Standard confirmed
Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
90.93 Standard confirmed
Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
90.93 Standard confirmed
Aerospace series - Identification marking of engine items - Design standard
90.93 Standard confirmed
Aerospace series - Identification marking methods for engine items - Engineering requirements
90.93 Standard confirmed
Implants for surgery - Active implantable medical devices - Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
60.60 Standard published
Implants for surgery - Active implantable medical devices - Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
60.60 Standard published
Aerospace series - Spectral quality of LED luminaires used with photoluminescent marking systems
60.60 Standard published
Aerospace series - Rotorcraft Emergency Breathing Systems (EBS) - Requirements, testing and marking
60.60 Standard published
Aerospace series - Rotorcraft constant wear lifejackets - Requirements, testing and marking
60.60 Standard published
Aerospace series - Rotorcraft immersion suits - Requirements, testing and marking
60.60 Standard published
Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods - Abrasion resistance of cable sheath markings
90.93 Standard confirmed
Marking by inscription for the identification of cores of electric cables
90.93 Standard confirmed
Lead-acid starter batteries - Part 2: Dimensions of batteries and marking of terminals
60.60 Standard published
Marking and documentation requirements for Photovoltaic Modules
90.93 Standard confirmed
Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE)
90.93 Standard confirmed
Marking of electrical and electronic equipment (EEE) in respect to separate collection of waste EEE (WEEE)
60.60 Standard published
Rotating electrical machines - Part 8: Terminal markings and direction of rotation
60.60 Standard published
Rotating electrical machines - Part 8: Terminal markings and direction of rotation
60.60 Standard published
Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
60.60 Standard published
Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
60.60 Standard published
Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
60.60 Standard published
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
60.60 Standard published
Basic and safety principles for man-machine interface, marking and identification - Actuating principles
60.60 Standard published
Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking
60.60 Standard published
General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
60.60 Standard published
Terminal markings for valve device stacks and assemblies and for power conversion equipment
60.60 Standard published
Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks
60.60 Standard published
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
60.60 Standard published
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
60.60 Standard published
Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
60.60 Standard published
Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC
60.60 Standard published
Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC
60.60 Standard published
Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC
60.60 Standard published
Fixed inductors for use in electronic and telecommunication equipment - Marking codes
60.60 Standard published
Standard practice for marking medical devices and other items for safety in the magnetic resonance environment
60.60 Standard published
Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet
90.93 Standard confirmed
Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control
90.93 Standard confirmed
Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control
60.60 Standard published
Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking
60.60 Standard published
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
90.93 Standard confirmed
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
90.93 Standard confirmed
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
90.93 Standard confirmed
Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
90.93 Standard confirmed
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
60.60 Standard published
Marking of electrical equipment with ratings related to electrical supply - Safety requirements
60.60 Standard published
Secondary cells and batteries - Marking symbols for identification of their chemistry
60.60 Standard published
Gas welding equipment - Marking for equipment used for gas welding, cutting and allied processes (ISO 10225:2013)
60.60 Standard published
Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018)
60.60 Standard published
Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2018)
60.60 Standard published
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
60.60 Standard published
Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
60.60 Standard published
Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017)
60.60 Standard published
Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information (ISO 14408:2016)
60.60 Standard published
Health Informatics - Automatic identification and data capture marking and labelling - Subject of care and individual provider identification (ISO 18530:2021)
60.60 Standard published
Gas cylinders - Identification and marking using radio frequency identification technology - Part 1: Reference architecture and terminology (ISO 21007-1:2005)
60.60 Standard published
Gas cylinders - Identification and marking using radio frequency identification technology - Part 2: Numbering schemes for radio frequency identification (ISO 21007-2:2015)
60.60 Standard published
Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 2: Requirements for testing and marking of separation efficiency (ISO 21904-2:2020)
60.60 Standard published
Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO 21904-3:2018)
60.60 Standard published
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)
60.60 Standard published
Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2011)
60.60 Standard published
Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2017)
60.60 Standard published
Freight containers - Coding, identification and marking (ISO 6346:2022, Corrected version 2022-08)
60.60 Standard published
Amendment 1 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation
60.60 Standard published
Rotating electrical machines - Part 8: Terminal markings and direction of rotation
60.60 Standard published
Amendment 1 - Marking codes for resistors and capacitors
60.60 Standard published
Corrigendum 1 - Marking codes for resistors and capacitors
60.60 Standard published
Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
60.60 Standard published
Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
60.60 Standard published
Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals
60.60 Standard published
Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
60.60 Standard published
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
60.60 Standard published
Basic and safety principles for man-machine interface, marking and identification - Actuating principles
60.60 Standard published
Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking
60.60 Standard published
Corrigendum 1 - General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
60.60 Standard published
General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
60.60 Standard published
Terminal markings for valve device stacks and assemblies and for power conversion equipment
60.60 Standard published
Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks
60.60 Standard published
Marking of electrical equipment with ratings related to electrical supply - Safety requirements
60.60 Standard published
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
60.60 Standard published
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
60.60 Standard published
Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
60.60 Standard published
Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135
60.60 Standard published
Fixed inductors for use in electronic and telecommunication equipment - Marking codes
60.60 Standard published
Radio data system (RDS) - VHF/FM sound broadcasting in the frequency range from 64,0 MHz to 108,0 MHz - Part 5: Marking of RDS receiver devices
60.60 Standard published
Standard practice for marking medical devices and other items for safety in the magnetic resonance environment
60.60 Standard published
Secondary cells and batteries - Marking symbols for identification of their chemistry
60.60 Standard published
Wind energy generation systems - Part 29: Marking and lighting of wind turbines
60.60 Standard published
Gas welding equipment — Marking for equipment used for gas welding, cutting and allied processes
90.60 Close of review
Industrial tyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims — Part 1: Designation, dimensions and marking
90.20 Standard under periodical review
Industrial tyres and rims — Cylindrical and conical base rubber solid tyres (metric series) — Designation, dimensions and marking
90.92 Standard to be revised
Offshore containers and associated lifting sets — Part 1: Design, manufacture and marking of offshore containers
90.92 Standard to be revised
Offshore containers and associated lifting sets — Part 2: Design, manufacture and marking of lifting sets
90.92 Standard to be revised
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes — Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results
60.60 Standard published
Plastics — Generic identification and marking of plastics products
90.93 Standard confirmed
Writing and marking instruments — Specification for caps to reduce the risk of asphyxiation
60.60 Standard published
Dentistry — Dentifrices — Requirements, test methods and marking
90.92 Standard to be revised
Optics and optical instruments — Microscopes — Marking of stereomicroscopes
90.93 Standard confirmed
Earth-moving machinery and rough-terrain trucks — Lighting, signalling and marking lights, and reflex reflectors
60.60 Standard published
Ceramic tiles — Definitions, classification, characteristics and marking
90.60 Close of review
Winter-sports equipment — Marking of parts made of polymer materials
90.93 Standard confirmed
Tracheal tubes designed for laser surgery — Requirements for marking and accompanying information
90.92 Standard to be revised
Implants for surgery — Active implantable medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
90.92 Standard to be revised
Ships and marine technology — Pyrotechnic life-saving appliances — Testing, inspection and marking of production units
90.93 Standard confirmed
Tractors and machinery for agriculture and forestry — Installation of lighting, light signalling and marking devices for travel on public roadways
90.93 Standard confirmed
Statistical methods — Six Sigma — Basic criteria underlying benchmarking for Six Sigma in organisations
90.93 Standard confirmed
Health informatics — Automatic identification and data capture marking and labelling — Subject of care and individual provider identification
90.93 Standard confirmed
Wood for manufacture of wood flooring — Symbols for marking according to species
90.60 Close of review
Gas cylinders — Identification and marking using radio frequency identification technology — Part 1: Reference architecture and terminology
90.93 Standard confirmed
Gas cylinders — Identification and marking using radio frequency identification technology — Part 2: Numbering schemes for radio frequency identification
90.93 Standard confirmed
Essential oils — General requirements for labelling and marking of containers
60.60 Standard published
Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 2: Requirements for testing and marking of separation efficiency
60.60 Standard published
Health and safety in welding and allied processes — Requirements, testing and marking of equipment for air filtration — Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices
90.93 Standard confirmed
Refrigerating systems and heat pumps — Valves — Requirements, testing and marking
60.60 Standard published
Hand taps for parallel and taper pipe threads — General dimensions and marking
90.93 Standard confirmed
Assessment and benchmarking of terminological resources — General concepts, principles and requirements
90.93 Standard confirmed
Assembly tools for screws and nuts — Screwdrivers for slotted-head screws — Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
90.20 Standard under periodical review
Ships and marine technology — Position-indicating lights for life-saving appliances — Testing, inspection and marking of production units
90.93 Standard confirmed
Ships and marine technology — Design, location and use of shipboard safety signs, fire control plan signs, safety notices and safety markings — Part 1: Design principles
60.60 Standard published
Ships and marine technology — Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings — Part 2: Catalogue
90.92 Standard to be revised
Ships and marine technology — Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings — Part 3: Code of practice
90.20 Standard under periodical review
Ships and marine technology — Design, location and use of shipboard safety signs, fire control plan signs, safety notices and safety markings — Part 4: Escape plan signs used for general emergency information
60.60 Standard published
Service activities relating to drinking water supply systems and wastewater systems — Guidelines for benchmarking of water utilities
90.93 Standard confirmed
Hydraulic fluid power — Marking of performance characteristics on hydraulic filters
90.93 Standard confirmed
Office machines and printing machines used for information processing — Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons
90.60 Close of review
Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols
90.92 Standard to be revised
High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking
90.92 Standard to be revised
All-terrain (AT) tyres and rims — Symbol marked pneumatic tyres on 5 degree tapered rims — Designation, dimension, marking and load ratings
90.93 Standard confirmed
Gas cylinders for medical use — Marking for identification of content
90.93 Standard confirmed
Aircraft — Hydraulic components — Marking to indicate the fluid for which a component is approved
60.60 Standard published
Industrial tyres and rims — Part 1: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Designation, dimensions and marking
90.92 Standard to be revised
Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
90.93 Standard confirmed
Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings
90.93 Standard confirmed
Agglomerated cork — Expansion joint fillers — Specifications, packaging and marking
90.93 Standard confirmed
Wheels and rims for pneumatic tyres — Vocabulary, designation and marking
60.60 Standard published
Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables
90.20 Standard under periodical review
Document management — Information classification, marking and handling — Part 1: Requirements
60.60 Standard published
Composition cork — Gasket material — Classification system, requirements, sampling, packaging and marking
90.93 Standard confirmed
Composition cork — Specifications, sampling, packaging and marking
90.93 Standard confirmed
Laboratory glassware — Methods for assessing the chemical resistance of enamels used for colour coding and colour marking
90.93 Standard confirmed
Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation
90.92 Standard to be revised
Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation — Amendment 1
60.60 Standard published
Bonded abrasive products — Shape types, designation and marking
60.60 Standard published
Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of product, dimensions, tolerances and markings
90.92 Standard to be revised
Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
90.93 Standard confirmed
Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
90.93 Standard confirmed
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to include in supplier's literature and product-marking requirements
60.60 Standard published
Metric series for agricultural, forestry machines and construction tyres — Part 1: Tyre designation, dimensions and marking, and tyre/rim coordination
90.60 Close of review
Optics and optical instruments — Microscopes — Slides — Part 1: Dimensions, optical properties and marking
90.93 Standard confirmed
Assembly tools for screws and nuts — Screwdrivers for cross-recessed head screws — Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
90.20 Standard under periodical review
Tubular tips for hand-held technical pens using India ink on tracing paper — Part 1: Definitions, dimensions, designation and marking
90.93 Standard confirmed
Refractory bricks for use in rotary kilns — Hot-face identification marking
90.93 Standard confirmed
Earth-moving machinery — Electrical wires and cables — Principles of identification and marking
90.93 Standard confirmed
Earth-moving machinery — Electrical wires and cables — Principles of identification and marking — Amendment 1
60.60 Standard published
Passenger cars — Engine cooling systems — Test methods and marking of pressure caps
90.93 Standard confirmed
Draughting media for technical drawings — Draughting film with polyester base — Part 1: Requirements and marking
90.93 Standard confirmed
Manually operated draughting machines — Part 2: Characteristics, performance, inspection and marking
90.93 Standard confirmed
Information technology — Computer graphics, image processing and environmental data representation — Benchmarking of vision-based spatial registration and tracking methods for mixed and augmented reality (MAR)
90.20 Standard under periodical review
Systems and software engineering — Information technology project performance benchmarking framework — Part 1: Concepts and definitions
90.60 Close of review
Systems and software engineering — Information technology project performance benchmarking framework — Part 2: Requirements for benchmarking
90.93 Standard confirmed
Systems and software engineering — Information technology project performance benchmarking framework — Part 3: Guidance for reporting
90.93 Standard confirmed
Systems and software engineering — Information technology project performance benchmarking framework — Part 4: Guidance for data collection and maintenance
90.93 Standard confirmed
Information technology — Automatic identification and data capture techniques — Guidelines for direct part marking (DPM)
90.93 Standard confirmed
Gas cylinders — Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system
60.60 Standard published
Direct Marking on Plastic Returnable Transport Items (RTIs)
60.60 Standard published
Packaging and the environment — Marking for material identification
60.60 Standard published
Industrial automation systems and integration — Product data representation and exchange — Part 1664: Application module: Device marking
90.93 Standard confirmed