Liquid petroleum products - Investigation on internal diesel injector sticking deposits mechanisms and the impacts of corrosion inhibitors
60.60 Standard published
Methods of test for dense refractory products - Guidelines for testing the corrosion of refractories caused by liquids
90.93 Standard confirmed
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
90.20 Standard under periodical review
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resistant steels for general purposes
60.60 Standard published
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes
60.60 Standard published
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
90.20 Standard under periodical review
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
90.20 Standard under periodical review
Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection
90.60 Close of review
Cathodic protection - External organic coatings for the corrosion protection of burried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
90.93 Standard confirmed
Method for the simulation of accelerated wear and corrosion for the detection of nickel release from coated items
60.60 Standard published
Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
90.93 Standard confirmed
Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
60.60 Standard published
Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General
90.93 Standard confirmed
Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials
90.93 Standard confirmed
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General
90.93 Standard confirmed
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys
90.93 Standard confirmed
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials
90.93 Standard confirmed
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels
90.93 Standard confirmed
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels
90.93 Standard confirmed
Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components
90.93 Standard confirmed
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems
90.93 Standard confirmed
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
90.60 Close of review
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
90.60 Close of review
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
90.60 Close of review
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
90.60 Close of review
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
90.60 Close of review
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
90.60 Close of review
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
90.93 Standard confirmed
Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test
90.93 Standard confirmed
Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete
90.93 Standard confirmed
Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid
90.60 Close of review
Space product assurance - Determination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosion
90.60 Close of review
Space product assurance - Determination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosion
90.60 Close of review
Space product assurance - Material selection for controlling stress-corrosion cracking
90.60 Close of review
Space product assurance - Material selection for controlling stress-corrosion cracking
90.60 Close of review
Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
90.60 Close of review
Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
90.60 Close of review
Building hardware - Corrosion resistance - Requirements and test methods
90.93 Standard confirmed
Building hardware - Corrosion resistance - Requirements and test methods
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Examination for loss of thickness due to erosion and/or corrosion using the TOFD technique
60.60 Standard published
Hardware for furniture - Test and evaluation methods for the corrosion resistance of furniture fittings
60.60 Standard published
Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate
90.93 Standard confirmed
Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate
90.93 Standard confirmed
Bearings, airframe rolling, rigid, single row ball bearings in corrosion resisting steel, diameter series 8 and 9 - Dimensions and loads - Aerospace series
60.60 Standard published
Bearings, airframe rolling, rigid, single row ball bearings in corrosion resisting steel, diameter series 0 and 2 - Dimensions and loads - Aerospace series
60.60 Standard published
Bearings, airframe rolling, double row, self aligning ball bearings, in corrosion resisting steel, diameter series 2 - Dimensions and loads - Aerospace series
60.60 Standard published
Bearings, airframe rolling, single row, self aligning roller bearings in corrosion resisting steel, diameter series 3 and 4 - Dimensions and loads - Aerospace series
60.60 Standard published
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Dimensions and loads
60.60 Standard published
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Dimensions and loads
60.60 Standard published
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Technical specification
90.93 Standard confirmed
Aerospace series - Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads
60.60 Standard published
Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification
90.93 Standard confirmed
Aerospace series - Bush, plain, in corrosion resisting steel with self-lubricating liner - Dimensions and loads
60.60 Standard published
Aerospace series - Bush, flanged, corrosion resisting steel, with self-lubricating liner - Dimensions and loads
60.60 Standard published
Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated for flight control rods - Dimensions
90.93 Standard confirmed
Aerospace series - Bearings, spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads
60.60 Standard published
Aerospace series - Requirements and test procedures for relays and contactors - Part 402: Corrosion, salt spray
90.93 Standard confirmed
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 001: Basic requirements
90.93 Standard confirmed
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 002: High corrosion resistance
90.93 Standard confirmed
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 003: High corrosion and fluid resistance
90.93 Standard confirmed
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance
90.93 Standard confirmed
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 005: For exterior use with surface preparation tolerance
90.93 Standard confirmed
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application
90.93 Standard confirmed
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring - Dimensions and loads
60.60 Standard published
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring - Dimensions and loads
60.60 Standard published
Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel or cobalt base alloys
60.60 Standard published
Aerospace series - Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions
90.93 Standard confirmed
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads
60.60 Standard published
Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads
60.60 Standard published
Aerospace series - Bearing, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads
60.60 Standard published
Aerospace series - Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods - Dimensions
90.93 Standard confirmed
Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C
90.93 Standard confirmed
Aerospace series - Screws, 100° countersunk normal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C
90.00 Start of review/2 Year Review Enquiry
Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys
60.60 Standard published
Aerospace series - Bearing, spherical, plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification
60.60 Standard published
Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C
60.60 Standard published
Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated, metric series - Classification: 900 MPa (at ambient temperature) / 120 °C
90.93 Standard confirmed
Aerospace series - Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) / 425 °C
60.60 Standard published
Aerospace series - Metric Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C
90.93 Standard confirmed
Aerospace series - Corrosion and heat resisting steel rivets - Technical specification
60.60 Standard published
Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers
60.60 Standard published
Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
60.60 Standard published
Aerospace series - Washers, wire locking, in corrosion resisting steel, passivated
90.93 Standard confirmed
Aerospace series - Test method for dry film lubricants - Corrosion test on steels specimens
90.93 Standard confirmed
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 °C
90.93 Standard confirmed
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Reduced clearance category - Dimensions and loads
60.60 Standard published
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 425 °C
90.93 Standard confirmed
Aerospace series - Bearings, airframe rolling - Single row self-aligining roller bearings in corrosion resisting steel - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Bearings, airframe rolling - Rigid double row ball bearings in corrosion resisting steel - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series
90.93 Standard confirmed
Aerospace series - Rivets, universal head, in corrosion resisting steel FE-PA92HT, passivated, inch based series
90.93 Standard confirmed
Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series
90.93 Standard confirmed
Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series
90.93 Standard confirmed
Aerospace series - Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series
90.93 Standard confirmed
Aerospace series - Ball bearings, rigid in corrosion resisting steel cadmium plated, for control cable pulleys - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution
60.60 Standard published
Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
60.60 Standard published
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9 - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2 - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4 - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads
60.60 Standard published
Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425°C
90.93 Standard confirmed
Aerospace series - Lockwire, drawn - Corrosion resisting steel
60.60 Standard published
Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys
60.60 Standard published
Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 °C
90.93 Standard confirmed
Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 °C
90.93 Standard confirmed
Aerospace series - Electrolytic polishing of corrosion resisting steels and heat resisting alloys
60.60 Standard published
Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in corrosion resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 315 °C
60.60 Standard published
Aerospace series - Circuit breakers - Test methods - Part 402: Corrosion
60.60 Standard published
Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter 3,2 mm < = D < = 100 mm - Thickness 0,32 mm < = a < = 2,5 mm - Dimensions
90.93 Standard confirmed
Aerospace series - Washers, laminated, in corrosion resisting steel
60.60 Standard published
Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated
60.60 Standard published
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9, reduced internal radial clearance - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Rod end, adjustable, with self-aligning double row ball bearing, in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads
60.60 Standard published
Aerospace series - Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads
60.60 Standard published
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with extended inner ring and flanged alignment bush - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated - Classification: 490 MPa (at ambient temperature) / 425 °C
90.93 Standard confirmed
Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses
60.60 Standard published
Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in steel - Inner ring and balls in corrosion resisting steel - Dimensions and loads - Inch series
60.60 Standard published
Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads
90.93 Standard confirmed
Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series
60.60 Standard published
Aerospace series - Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated - Wide series - Dimensions and loads - Inch series
60.60 Standard published
Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in corrosion resisting steel, passivated - Classification: 900 MPa (at ambient temperature) / 120 °C
60.60 Standard published
Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
60.60 Standard published
Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
60.60 Standard published
Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
60.60 Standard published
Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
60.60 Standard published
Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 315 °C
90.93 Standard confirmed
Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C
90.93 Standard confirmed
Aerospace series - Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature)
90.93 Standard confirmed
Aerospace series - Washers, tab in corrosion resisting steel for flight control rods - Dimensions
90.93 Standard confirmed
Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature) - Technical specification
60.60 Standard published
Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Design standard
60.60 Standard published
Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Installation and removal procedure
60.60 Standard published
Aerospace series - Bushes, plain in corrosion resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
90.93 Standard confirmed
Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series
90.93 Standard confirmed
Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 003: Inch series with low friction coefficient
60.60 Standard published
Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 2: Inch series
60.60 Standard published
Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Wide series - Dimensions and loads - Part 003: Inch series with low friction coefficient
60.60 Standard published
Aerospace series - Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Part 2: Inch series
60.60 Standard published
Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Technical specification
90.93 Standard confirmed
Aerospace series - Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated
60.60 Standard published
Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series
60.60 Standard published
Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series
60.60 Standard published
Aerospace series - Paints and varnishes - Chromate free (non corrosion inhibiting) two-components room temperature curing primer - Chromate free primer for military application
60.60 Standard published
Aerospace series - Paints and varnishes - Corrosion resistant chromated two-components room temperature curing epoxy primer - High corrosion resistance for military application
60.60 Standard published
Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA)
90.93 Standard confirmed
Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
90.93 Standard confirmed
Aerospace series - Screws, 100° countersunk normal head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification : 1 100 MPa (at ambient temperature) / 425 °C
60.60 Standard published
Aerospace series - Screws, pan head, Spiral Drive Recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification : 1 100 MPa (at ambient temperature) / 425 °C
60.60 Standard published
Aerospace series - Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, narrow series - Part 1: Dimensions and loads for narrow series
60.60 Standard published
Aerospace series - Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, wide series - Part 2: Dimensions and loads
60.60 Standard published
Aerospace series — Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions — Part 3: Technical specification
60.60 Standard published
Protection against corrosion by stray current from direct current systems
90.93 Standard confirmed
Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
60.60 Standard published
Aerospace series - Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel - Dimensions and loads - Inch series
60.60 Standard published
Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
60.60 Standard published
Aerospace series - Bearing, spherical, plain, in corrosion resisting steel - Narrow series - Dimensions and loads - Inch series
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
60.60 Standard published
Aerospace series - Rod-end with bearing EN 4265 in corrosion resisting steel, external threaded shank - Dimensions and loads - Inch series
60.60 Standard published
Aerospace series - Rod-end with bearing per EN 4614 with self lubricating liner in corrosion resisting steel with external threaded shank - Dimensions and loads - Inch series
60.60 Standard published
Aerospace series - Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank - Dimensions and loads, Inch series
60.60 Standard published
Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
60.60 Standard published
Aerospace series - Bearing, spherical plain with self-lubricating liner, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series
60.60 Standard published
Aerospace series - Bearing, spherical plain, metal to metal, extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series
60.60 Standard published
Aerospace series - Rod-end with bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank - Dimensions and loads - Inch series
60.60 Standard published
Aerospace series - Rod-end, with bearing per EN 6096, with self-lubricating liner in corrosion resisting steel, extra wide inner ring, external threaded shank - Dimensions and loads - Inch series
60.60 Standard published
Determination of certain substances in electrotechnical products - Part 7-1: Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method
60.60 Standard published
Photovoltaic (PV) modules - Ammonia corrosion testing
60.60 Standard published
Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings
90.93 Standard confirmed
Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
90.93 Standard confirmed
Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance
60.60 Standard published
Optical fibre cables - Part 1-220: Generic specification - Basic optical cable test procedures - Environmental test methods - Salt spray corrosion test, method F20
60.60 Standard published
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2022)
60.60 Standard published
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) - Amendment 1: Footnote of warning (ISO 10062:2022/Amd 1:2024)
60.60 Standard published
Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:2022)
60.60 Standard published
Dentistry - Corrosion test methods for metallic materials (ISO 10271:2020)
60.60 Standard published
Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999)
90.93 Standard confirmed
Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2017)
60.60 Standard published
Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002)
60.60 Standard published
Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water (ISO 11306:1998)
90.93 Standard confirmed
Corrosion of metals and alloys - Guidelines for the evaluation of pitting corrosion (ISO 11463:2020)
60.60 Standard published
Corrosion of metals and alloys - Corrosion tests in artificial atmosphere - Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) (ISO 11474:1998)
60.60 Standard published
Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing (ISO 11782-1:1998)
60.60 Standard published
Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens (ISO 11782-2:1998)
60.60 Standard published
Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens - Amendment 1 (ISO 11782-2:1998/Amd 1:2024)
60.60 Standard published
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity (ISO 11844-1:2020)
60.60 Standard published
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2020)
60.60 Standard published
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020)
60.60 Standard published
Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys (ISO 11846:1995)
90.92 Standard to be revised
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017)
60.60 Standard published
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
60.60 Standard published
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 3: Testing of coating systems on materials and components in automotive construction (ISO 11997-3:2022)
60.60 Standard published
Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006)
60.60 Standard published
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017)
60.60 Standard published
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:2017)
60.60 Standard published
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:2017)
60.60 Standard published
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation (ISO 12944-4:2017)
60.60 Standard published
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019)
60.60 Standard published
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018)
60.60 Standard published
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:2017)
60.60 Standard published
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017)
60.60 Standard published
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)
60.60 Standard published
Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995)
90.93 Standard confirmed
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020)
60.60 Standard published
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
60.60 Standard published
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2019)
60.60 Standard published
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing (ISO 14713-3:2017)
60.60 Standard published
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2020)
60.60 Standard published
Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test (ISO 15324:2000)
60.60 Standard published
Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys (ISO 15329:2006)
60.60 Standard published
Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002)
90.92 Standard to be revised
Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003)
90.93 Standard confirmed
Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions (ISO 16151:2018)
60.60 Standard published
Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2007)
60.60 Standard published
Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2007)
60.60 Standard published
Corrosion of metals and alloys - Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process - "Dry" and "wet" conditions at constant absolute humidity (ISO 16539:2013)
60.60 Standard published
Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10)
60.60 Standard published
Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems (ISO 16784-1:2006)
60.60 Standard published
Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig (ISO 16784-2:2006)
60.60 Standard published
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions (ISO 17092:2005)
60.60 Standard published
Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
60.60 Standard published
Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003)
90.93 Standard confirmed
Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
60.60 Standard published
Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2019)
60.60 Standard published
Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019)
60.60 Standard published
Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
60.60 Standard published
Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 2: Maintenance and field repair coatings for riser pipes (ISO 18797-2:2021)
60.60 Standard published
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
60.60 Standard published
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
60.60 Standard published
Corrosion of metal and alloys - Determination of resistance of magnesium alloys to stress corrosion cracking (ISO 20728:2018)
60.60 Standard published
Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X - and gamma rays - Part 1: Tangential radiographic inspection (ISO 20769-1:2018)
60.60 Standard published
Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO 20769-2:2018)
60.60 Standard published
Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO 21207:2015)
60.60 Standard published
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007)
60.60 Standard published
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion (ISO 21227-4:2008)
60.60 Standard published
Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010)
60.60 Standard published
Petroleum, petrochemical and natural gas industries - Prevention of corrosion on pipeline systems influenced by stray currents (ISO 21857:2021)
60.60 Standard published
Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
60.60 Standard published
Footwear - Test methods for accessories: Metallic accessories - Corrosion resistance (ISO 22775:2004)
90.93 Standard confirmed
Dentistry - Corrosion resistance of dental amalgam (ISO 23325:2020)
60.60 Standard published
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008)
60.60 Standard published
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017)
60.60 Standard published
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle (ISO 28706-3:2017)
60.60 Standard published
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016)
60.60 Standard published
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems (ISO 28706-5:2010)
60.60 Standard published
Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)
60.60 Standard published
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)
60.60 Standard published
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020)
60.60 Standard published
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
60.60 Standard published
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
60.60 Standard published
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications (ISO 3506-5:2022)
60.60 Standard published
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)
60.60 Standard published
Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998)
90.93 Standard confirmed
Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998)
90.93 Standard confirmed
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012)
60.60 Standard published
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010)
60.60 Standard published
Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test) (ISO 4536:1985)
90.93 Standard confirmed
Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978)
90.93 Standard confirmed
Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions (ISO 4543:1981)
90.93 Standard confirmed
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2018)
60.60 Standard published
Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016)
60.60 Standard published
Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2024)
60.60 Standard published
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012)
60.60 Standard published
Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014)
60.60 Standard published
Corrosion test in artificial atmosphere - General requirements (ISO 7384:1986)
90.93 Standard confirmed
Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015)
60.60 Standard published
Corrosion of metals and alloys - Stress corrosion testing - Part 10: Reverse U-bend method (ISO 7539-10:2020)
60.60 Standard published
Corrosion of metals and alloys - Stress corrosion testing - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013)
60.60 Standard published
Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:2012)
60.60 Standard published
Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimen (ISO 7539-2:1989)
90.93 Standard confirmed
Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens (ISO 7539-3:1989)
90.93 Standard confirmed
Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens (ISO 7539-4:1989)
90.93 Standard confirmed
Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens (ISO 7539-5:1989)
90.93 Standard confirmed
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement (ISO 7539-6:2018, Corrected version 2018-11)
60.60 Standard published
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement - Amendment 1 (ISO 7539-6:2018/Amd 1:2024)
60.60 Standard published
Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing (ISO 7539-7:2005)
90.93 Standard confirmed
Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments (ISO 7539-8:2000)
60.60 Standard published
Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement (ISO 7539-9:2021)
60.60 Standard published
Corrosion of metals and alloys - Vocabulary (ISO 8044:2020)
60.60 Standard published
Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens (ISO 8407:2021)
60.60 Standard published
Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011)
60.60 Standard published
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018)
60.60 Standard published
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018)
60.60 Standard published
Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation (ISO 9223:2012)
60.60 Standard published
Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012)
60.60 Standard published
Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012)
60.60 Standard published
Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012)
60.60 Standard published
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2022)
60.60 Standard published
Corrosion tests in artificial atmospheres - Salt spray tests - Amendment 1: Footnote of warning (ISO 9227:2022/Amd 1:2024)
60.60 Standard published
Nickel-based alloys - Determination of resistance to intergranular corrosion (ISO 9400:1990)
90.93 Standard confirmed
Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:2017)
60.60 Standard published
Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
60.60 Standard published
Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
60.60 Standard published
Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance
60.60 Standard published
Semiconductor devices - Part 5-13: Optoelectronic devices - Hydrogen sulphide corrosion test for LED packages
60.60 Standard published
Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
60.60 Standard published
Optical fibre cables - Part 1-220: Generic specification - Basic optical cable test procedures - Environmental test methods - Salt spray corrosion test, method F20
60.60 Standard published
Determination of certain substances in electrotechnical products - Part 7-1: Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method
60.60 Standard published
Corrigendum 1 - Photovoltaic (PV) modules - Ammonia corrosion testing
60.60 Standard published
Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent - Summary and relevance of test methods
60.60 Standard published
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
60.60 Standard published
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) — Amendment 1: Footnote of Warning
60.60 Standard published
Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions
90.60 Close of review
Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
60.60 Standard published
Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates — Rating of test specimens and manufactured articles subjected to corrosion tests
90.93 Standard confirmed
Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 2: Inch series
90.93 Standard confirmed
Corrosion of metals and alloys — Alternate immersion test in salt solution
90.93 Standard confirmed
Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion
90.93 Standard confirmed
Corrosion of metals and alloys — Guidelines for exposing and evaluating metals and alloys in surface sea water
90.20 Standard under periodical review
Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion
60.60 Standard published
Corrosion of metals and alloys — Corrosion tests in artificial atmosphere — Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
90.20 Standard under periodical review
Corrosion of metals and alloys — Corrosion fatigue testing — Part 1: Cycles to failure testing
90.20 Standard under periodical review
Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens
90.93 Standard confirmed
Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens — Amendment 1
60.60 Standard published
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1: Determination and estimation of indoor corrosivity
60.60 Standard published
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres
60.60 Standard published
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
60.60 Standard published
Corrosion of metals and alloys — General principles for corrosion testing
60.60 Standard published
Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
90.93 Standard confirmed
Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys
90.93 Standard confirmed
Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1
60.60 Standard published
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid
90.92 Standard to be revised
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
90.92 Standard to be revised
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 3: Testing of coating systems on materials and components in automotive construction
60.60 Standard published
Aerospace — Rivets, solid, in corrosion-resisting steel — Procurement specification
90.93 Standard confirmed
Corrosion of metals and alloys — Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
90.93 Standard confirmed
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction
90.93 Standard confirmed
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
90.93 Standard confirmed
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations
90.93 Standard confirmed
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation
90.93 Standard confirmed
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems
90.60 Close of review
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods
90.60 Close of review
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work
90.93 Standard confirmed
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance
90.93 Standard confirmed
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
90.60 Close of review
Surgical and dental hand instruments — Determination of resistance against autoclaving, corrosion and thermal exposure
90.92 Standard to be revised
Corrosion of metals and alloys — Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
90.60 Close of review
Oil and gas industries including lower carbon energy — Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material — Technical delivery conditions
60.60 Standard published
Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance
90.93 Standard confirmed
Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 2: Hot dip galvanizing
90.92 Standard to be revised
Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 3: Sherardizing
90.93 Standard confirmed
Corrosion of metals and alloys — Guidelines for applying statistics to analysis of corrosion data
90.93 Standard confirmed
Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
90.92 Standard to be revised
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 7: Calcium corrosion method
90.93 Standard confirmed
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
60.60 Standard published
Corrosion of metals and alloys — Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
90.93 Standard confirmed
Corrosion of metals and alloys — Evaluation of stress corrosion cracking by the drop evaporation test
90.93 Standard confirmed
Corrosion of metals and alloys — Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys
90.93 Standard confirmed
Paints and varnishes — Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution
90.93 Standard confirmed
Passivation of corrosion-resistant stainless-steel fasteners
90.93 Standard confirmed
Stainless steels for general purposes — Part 1: Corrosion-resistant flat products
90.60 Close of review
Stainless steels for general purposes — Part 2: Corrosion-resistant semi-finished products, bars, rods and sections
90.60 Close of review
Corrosion of metals and alloys — Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions
90.93 Standard confirmed
Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating — Part 1: Pull-off testing
90.92 Standard to be revised
Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating — Part 2: Cross-cut testing and X-cut testing
90.92 Standard to be revised
Implants for surgery — Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices
90.92 Standard to be revised
Implants for surgery — Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods
90.93 Standard confirmed
Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — "Dry" and "wet" conditions at constant absolute humidity
90.93 Standard confirmed
Corrosion of metals and alloys — Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
90.93 Standard confirmed
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
90.92 Standard to be revised
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
90.92 Standard to be revised
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
90.92 Standard to be revised
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions
90.93 Standard confirmed
Corrosion of metals and alloys — Guidelines for corrosion test by electrochemical noise measurements
90.93 Standard confirmed
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
90.93 Standard confirmed
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
90.93 Standard confirmed
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
90.93 Standard confirmed
Corrosion of metals and alloys — Conventions applicable to electrochemical measurements in corrosion testing
90.93 Standard confirmed
Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
90.20 Standard under periodical review
Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements — Technical Corrigendum 1
60.60 Standard published
Corrosion of metals and alloys — Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
90.93 Standard confirmed
Thermal spraying — Coatings for protection against corrosion and oxidation at elevated temperatures
90.93 Standard confirmed
Corrosion of metals and alloys — Determination of the critical pitting temperature under potientiostatic control
90.93 Standard confirmed
Paints and varnishes — Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
90.60 Close of review
Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
90.93 Standard confirmed
Corrosion of metals and alloys — Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids
90.93 Standard confirmed
Corrosion of metals and alloys — Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
90.93 Standard confirmed
Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria
90.20 Standard under periodical review
Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
90.93 Standard confirmed
Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM
90.93 Standard confirmed
Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 2: Maintenance and field repair coatings for riser pipes
60.60 Standard published
Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
90.93 Standard confirmed
Corrosion of metals and alloys — Corrosivity of atmospheres — Mapping areas of increased risk of corrosion
60.60 Standard published
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
90.93 Standard confirmed
Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems
90.60 Close of review
Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems
90.92 Standard to be revised
Corrosion of metal and alloys — Determination of resistance of magnesium alloys to stress corrosion cracking
90.93 Standard confirmed
Non-destructive testing — Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays — Part 1: Tangential radiographic inspection
90.92 Standard to be revised
Non-destructive testing — Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays — Part 2: Double wall radiographic inspection
90.92 Standard to be revised
Corrosion of metals and alloys — Determination of the corrosion rates of embedded steel reinforcement in concrete exposed to simulated marine environments
60.60 Standard published
Corrosion of metals and alloys — Measurement of environmentally assisted small crack growth rate
90.93 Standard confirmed
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
90.92 Standard to be revised
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 3: Evaluation of delamination and corrosion around a scribe
90.93 Standard confirmed
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 4: Evaluation of filiform corrosion
90.93 Standard confirmed
Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil and gas production systems
90.93 Standard confirmed
Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service
90.60 Close of review
Corrosion of metals and alloys — Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
90.93 Standard confirmed
Corrosion of metals and alloys — Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels
90.93 Standard confirmed
Composites and metal assemblies — Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres — Salt spray tests
90.93 Standard confirmed
Petroleum, petrochemical and natural gas industries — Prevention of corrosion on pipeline systems influenced by stray currents
60.60 Standard published
Corrosion of metals and alloys — Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel
60.60 Standard published
Corrosion of metals and alloys — Sulfur dioxide test in a humid atmosphere (fixed gas method)
90.93 Standard confirmed
Footwear — Test methods for accessories: Metallic accessories — Corrosion resistance
90.93 Standard confirmed
Corrosion of metals and alloys — Test method for measuring the stress corrosion crack growth rate of steels and alloys under static-load conditions in high-temperature water
60.60 Standard published
Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion
60.60 Standard published
Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method
60.60 Standard published
Corrosion control engineering life cycle — General requirements
60.60 Standard published
Pipeline corrosion control engineering life cycle — General requirements
60.60 Standard published
Corrosion of metals and alloys — Guidelines for the corrosion testing of metals and alloys exposed in deep-sea water
60.60 Standard published
Corrosion of metals and alloys — Multielectrode arrays for corrosion measurement
60.60 Standard published
Corrosion of metals and alloys — Requirements for localised corrosion and environmentally assisted cracking testing of additively manufactured metals and alloys
60.60 Standard published
Corrosion of metals and alloys — Rating method by appearance of rust and stains of atmospheric corrosion for stainless steels
60.60 Standard published
Corrosion of metals and alloys — Standard test method for particle-free erosion corrosion of metallic materials by jet-in-slit
60.60 Standard published
Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 1: Clad bends
60.60 Standard published
Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 2: Clad fittings
60.60 Standard published
Corrosion control engineering life cycle in fossil fuel power plants — General requirements
60.60 Standard published
Metallic coatings — Corrosion test method for decorative chrome plating under a de-icing salt environment
60.60 Standard published
Non-destructive testing — Acoustic emission testing — Detection of corrosion at atmospheric and low-pressure metallic storage tank floors
60.60 Standard published
Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments
90.92 Standard to be revised
Road vehicles — Brake lining friction materials — Evaluation of corrosion effects on painted backing plates and brake shoes
90.93 Standard confirmed
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 1: Determination of resistance to chemical corrosion by acids at room temperature
90.93 Standard confirmed
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
90.92 Standard to be revised
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle
90.93 Standard confirmed
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
90.92 Standard to be revised
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 5: Determination of resistance to chemical corrosion in closed systems
90.93 Standard confirmed
Paints and varnishes — Corrosion protection by protective paint systems — Assessment of porosity in a dry film
90.92 Standard to be revised
Watch-cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness, corrosion resistance and adhesion
90.93 Standard confirmed
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs with specified grades and property classes
60.60 Standard published
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts with specified grades and property classes
60.60 Standard published
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
90.92 Standard to be revised
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws
90.92 Standard to be revised
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications
60.60 Standard published
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners
60.60 Standard published
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 7: Flat washers with specified grades and property classes
60.60 Standard published
Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
90.93 Standard confirmed
Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
90.93 Standard confirmed
Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels
90.93 Standard confirmed
Corrosion of metals and alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel
60.60 Standard published
Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
60.60 Standard published
Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 1: Water-containing fluids
90.93 Standard confirmed
Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 2: Non-aqueous fluids
90.93 Standard confirmed
Metallic and non-organic coatings on metallic substrates — Saline droplets corrosion test (SD test)
90.93 Standard confirmed
Electrodeposited chromium coatings — Electrolytic corrosion testing (EC test)
90.93 Standard confirmed
Metallic and other non-organic coatings — Corrodkote corrosion test (CORR test)
90.93 Standard confirmed
Metallic and other non-organic coatings — General rules for corrosion tests applicable for storage conditions
90.93 Standard confirmed
Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates
90.93 Standard confirmed
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates
90.93 Standard confirmed
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion
60.60 Standard published
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
90.93 Standard confirmed
Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion potential (E-CLCP) for Ti alloys fabricated via additive manufacturing method in simulated biomedical solutions
60.60 Standard published
Corrosion of metals and alloys — Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures
60.60 Standard published
Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts
60.60 Standard published
Corrosion of metals and alloys — Corrosion test method for disinfectant — Total immersion method
60.60 Standard published
Corrosion of metals and alloys — Guidelines and requirements for corrosion testing in simulated environment of deep-sea water
60.60 Standard published
Steel sheet, hot-rolled, of structural quality with improved atmospheric corrosion resistance
90.93 Standard confirmed
Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
60.60 Standard published
Road vehicles — Brake linings — Seizure to ferrous mating surface due to corrosion — Test procedure
90.60 Close of review
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method
90.60 Close of review
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria
90.93 Standard confirmed
Lubricants, industrial oils and related products (class L) — Classification — Part 8: Family R (Temporary protection against corrosion)
90.93 Standard confirmed
Corrosion of metals and alloys — Wiping method for measurements of gases and particles on real structures and equipment
60.60 Standard published
Corrosion tests in artificial atmosphere — General requirements
90.93 Standard confirmed
Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests
90.93 Standard confirmed
Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
60.60 Standard published
Corrosion of metals and alloys — Stress corrosion testing — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
90.93 Standard confirmed
Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures
90.60 Close of review
Corrosion of metals and alloys — Stress corrosion testing — Part 12: Requirements for atmospheric stress corrosion cracking testing
60.60 Standard published
Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens
90.93 Standard confirmed
Corrosion of metals and alloys — Stress corrosion testing — Part 3: Preparation and use of U-bend specimens
90.93 Standard confirmed
Corrosion of metals and alloys — Stress corrosion testing — Part 4: Preparation and use of uniaxially loaded tension specimens
90.93 Standard confirmed
Corrosion of metals and alloys — Stress corrosion testing — Part 5: Preparation and use of C-ring specimens
90.93 Standard confirmed
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
90.60 Close of review
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement — Amendment 1
60.60 Standard published
Corrosion of metals and alloys — Stress corrosion testing — Part 7: Method for slow strain rate testing
90.93 Standard confirmed
Corrosion of metals and alloys — Stress corrosion testing — Part 8: Preparation and use of specimens to evaluate weldments
90.93 Standard confirmed
Corrosion of metals and alloys — Stress corrosion testing — Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
60.60 Standard published
Determination of galvanic corrosion rate for assembled forms of carbon fibre reinforced plastics (CFRPs) and protection-coated metal — Electrochemical tests in neutral sodium chloride solution
60.60 Standard published
Aerospace — Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa — Procurement specification
90.92 Standard to be revised
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
60.60 Standard published
Metals and alloys — Atmospheric corrosion testing — General requirements
90.93 Standard confirmed
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method
90.93 Standard confirmed
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method
90.93 Standard confirmed
Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
90.93 Standard confirmed
Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
90.93 Standard confirmed
Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
90.92 Standard to be revised
Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity
90.93 Standard confirmed
Corrosion tests in artificial atmospheres — Salt spray tests — Amendment 1: Footnote of Warning
60.60 Standard published
Nickel-based alloys — Determination of resistance to intergranular corrosion
90.93 Standard confirmed
Soft soldering fluxes — Test methods — Part 15: Copper corrosion test
90.93 Standard confirmed
Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking
90.93 Standard confirmed
Aerospace — Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
90.60 Close of review
Aerospace — Double-shank ball-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope — Dimensions and loads
90.60 Close of review
Aerospace — Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
90.60 Close of review
Aerospace — Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
90.60 Close of review
Aerospace — Fork-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope — Dimensions and loads
90.60 Close of review
Aerospace — Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope for rolling bearings — Dimensions and loads
90.60 Close of review
Aerospace — Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles — Dimensions
90.60 Close of review
Corrosion of metals and alloys — Corrosion test method for disinfectant — Spray test method
60.60 Standard published
Corrosion of metals and alloys — Performance test method for corrosion inhibitors used in chemical cleaning of industry equipment
60.60 Standard published
Solar energy — Water heating systems — Guide to material selection with regard to internal corrosion
90.93 Standard confirmed
Overview of methods available for particle-free erosion corrosion testing in flowing liquids
60.60 Standard published
Corrosion of metals and alloys — Test method for corrosion of materials by electrochemical impedance measurements
60.60 Standard published
Corrosion of metals and alloys — Corrosion tests in artificial atmospheres — Guidelines for selection of accelerated corrosion test for product qualification
60.60 Standard published
Corrosion of metals and alloys — Overview of metal corrosion protection when using disinfectants
60.60 Standard published
Corrosion of metals and alloys — Exposure test results in the Asian Monsoon region
60.60 Standard published
Lubricants, industrial oils and related products (class L) — Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications
90.93 Standard confirmed
