Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior
60.60 Standard published
Test requirements for low voltage aerial bundled cable accessories - Part 6: Environmental testing
90.93 Standard confirmed
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
60.60 Standard published
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
60.60 Standard published
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
60.60 Standard published
Environmental testing - Part 2-18: Tests – Test R and guidance: Water
60.60 Standard published
Environmental testing - Part 2-2: Tests - Test B: Dry heat
60.60 Standard published
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
60.60 Standard published
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
60.60 Standard published
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
60.60 Standard published
Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
60.60 Standard published
Environmental testing - Part 2: Tests - Test Z/AM: Combined cold/low air pressure tests
60.60 Standard published
Environmental testing - Part 2: Tests - Test Z/BM: Combined dry heat/low air pressure tests
60.60 Standard published
Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
60.60 Standard published
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections
60.60 Standard published
Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents
60.60 Standard published
Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents
60.60 Standard published
Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests
60.60 Standard published
Environmental testing - Part 2: Tests - Guidance on the application of the tests of IEC 60068 to simulate the effects of storage
60.60 Standard published
Environmental testing - Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
60.60 Standard published
Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce
60.60 Standard published
Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method
60.60 Standard published
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
60.60 Standard published
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
60.60 Standard published
Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
60.60 Standard published
Environmental testing - Part 2: Test methods - Test Z/ABDM: Climatic sequence
60.60 Standard published
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
60.60 Standard published
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
60.60 Standard published
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
60.60 Standard published
Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method
60.60 Standard published
Environmental testing - Part 2-66: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)
60.60 Standard published
Environmental testing - Part 2: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
60.60 Standard published
Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
60.60 Standard published
Environmental testing - Part 2: Tests - Test L: Dust and sand
60.60 Standard published
Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
60.60 Standard published
Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
60.60 Standard published
Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
60.60 Standard published
Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
60.60 Standard published
Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state
60.60 Standard published
Environmental testing - Part 2: Tests - Test Xc: Fluid contamination
60.60 Standard published
Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination
60.60 Standard published
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
60.60 Standard published
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
60.60 Standard published
Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
60.60 Standard published
Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis
60.60 Standard published
Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste
60.60 Standard published
Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers
60.60 Standard published
Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
60.60 Standard published
Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering
60.60 Standard published
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
60.60 Standard published
Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
60.60 Standard published
Environmental testing - Part 5: Guide to drafting of test methods - Terms and definitions
60.60 Standard published
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
60.60 Standard published
Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods
60.60 Standard published
Environmental testing - Part 2-11: Tests - Test Ka: Salt mist
60.60 Standard published
Environmental testing - Part 2-13: Tests - Test M: Low air pressure
60.60 Standard published
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
60.60 Standard published
Environmental testing - Part 2-17: Tests - Test Q: Sealing
60.60 Standard published
Environmental testing - Part 2-20: Tests - Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads
60.60 Standard published
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
60.60 Standard published
Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
60.60 Standard published
Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
60.60 Standard published
Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
60.60 Standard published
Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies
60.60 Standard published
Environmental testing - Part 2-85: Tests - Test Fj: Vibration - Long time history replication
60.60 Standard published
Environmental testing - Part 2-86: Tests - Test Fx: Vibration - Multi-exciter and multi-axis method
60.60 Standard published
Environmental testing - Part 2-87: Tests - UV-C exposure of materials and components to simulate ultraviolet germicidal Irradiation or other applications
60.60 Standard published
Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
60.60 Standard published
Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment
60.60 Standard published
Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment
60.60 Standard published
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
60.60 Standard published
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
60.60 Standard published
Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers
60.60 Standard published
Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers
60.60 Standard published
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)
60.60 Standard published
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
60.60 Standard published
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
60.60 Standard published
Basic environmental testing procedures - Part 2: Tests - Guidance to Test Kd: Hydrogen sulphide test for contacts and connections
60.60 Standard published
Amendment 1 - Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
60.60 Standard published
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
60.60 Standard published
Environmental testing - Part 2-11: Tests - Test Ka: Salt mist
60.60 Standard published
Environmental testing - Part 2-1: Tests - Test A: Cold
60.60 Standard published
Environmental testing - Part 2-13: Tests - Test M: Low air pressure
60.60 Standard published
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
60.60 Standard published
Environmental testing - Part 2-17: Tests - Test Q: Sealing
60.60 Standard published
Environmental testing - Part 2-18: Tests - Test R and guidance: Water
60.60 Standard published
Environmental testing - Part 2-20: Tests - Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads
60.60 Standard published
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
60.60 Standard published
Environmental testing - Part 2-2: Tests - Test B: Dry heat
60.60 Standard published
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
60.60 Standard published
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
60.60 Standard published
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
60.60 Standard published
Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
60.60 Standard published
Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
60.60 Standard published
Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
60.60 Standard published
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections
60.60 Standard published
Amendment 1 - Basic environmental testing procedures - Part 2-45: Tests - Test XA and guidance: Immersion in cleaning solvents
60.60 Standard published
Basic environmental testing procedures - Part 2-45: Tests - Test XA and guidance: Immersion in cleaning solvents
60.60 Standard published
Basic environmental testing procedures - Part 2-46: Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections
60.60 Standard published
Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
60.60 Standard published
Basic environmental testing procedures - Part 2-49: Tests - Guidance to test Kc: Sulphur dioxide test for contacts and connections
60.60 Standard published
Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
60.60 Standard published
Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
60.60 Standard published
Environmental testing - Part 2-53: Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
60.60 Standard published
Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce
60.60 Standard published
Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method
60.60 Standard published
Amendment 1 - Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
60.60 Standard published
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
60.60 Standard published
Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
60.60 Standard published
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
60.60 Standard published
Amendment 1 - Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
60.60 Standard published
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
60.60 Standard published
Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method
60.60 Standard published
Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)
60.60 Standard published
Amendment 1 - Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
60.60 Standard published
Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
60.60 Standard published
Environmental testing - Part 2-68: Tests - Test L: Dust and sand
60.60 Standard published
Amendment 1 - Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
60.60 Standard published
Corrigendum 1 - Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement)
60.60 Standard published
Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
60.60 Standard published
Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
60.60 Standard published
Amendment 1 - Basic environmental testing procedures - Part 2-7: Tests - Test Ga and guidance: Acceleration, steady state
60.60 Standard published
Basic environmental testing procedures - Part 2-7: Tests - Test Ga and guidance: Acceleration, steady state
60.60 Standard published
Amendment 1 - Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination
60.60 Standard published
Environmental testing - Part 2: Tests - Test Xc: Fluid contamination
60.60 Standard published
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
60.60 Standard published
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
60.60 Standard published
Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
60.60 Standard published
Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis
60.60 Standard published
Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies
60.60 Standard published
Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste
60.60 Standard published
Environmental testing - Part 2-85: Tests - Test Fj: Vibration - Long time history replication
60.60 Standard published
Environmental testing - Part 2-86: Tests -Test Fx: Vibration - Multi-exciter and multi-axis method
60.60 Standard published
Environmental testing – Part 2-87: Tests – UV-C exposure of materials and components to simulate ultraviolet germicidal Irradiation or other applications
60.60 Standard published
Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers
60.60 Standard published
Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
60.60 Standard published
Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering
60.60 Standard published
Corrigendum 1 - Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment
60.60 Standard published
Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment
60.60 Standard published
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
60.60 Standard published
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
60.60 Standard published
Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers
60.60 Standard published
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)
60.60 Standard published
Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
60.60 Standard published
Environmental testing - Part 5-2: Guide to drafting of test methods - Terms and definitions
60.60 Standard published
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
60.60 Standard published
Plasma display panels - Part 4-1: Environmental testing methods - Climatic and mechanical
60.60 Standard published
Plasma display panels - Part 4-2: Environmental testing methods - Panel strength
60.60 Standard published
Organic light emitting diode (OLED) displays - Part 5: Environmental testing methods
60.60 Standard published
Flexible display devices - Part 6-2: Environmental testing methods
60.60 Standard published
Environmental testing - Part 3-12: Supporting documentation and guidance - Method to evaluate a possible lead-free solder reflow temperature profile
60.60 Standard published
Environmental testing - Part 3-15: Supporting documentation and guidance - Vacuum-assisted reflow soldering
60.60 Standard published
Environmental testing - Part 3-82: Supporting documentation and guidance - Confirmation of the performance of whisker test method
60.60 Standard published
Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing
60.60 Standard published
Vibration generating machines — Guidance for selection — Part 4: Equipment for multi-axial environmental testing
60.60 Standard published
