Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 1: Survey method using a fixed radiation factor (ISO/TS 7849-1:2009)
60.60 Standard published
Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 2: Engineering method including determination of the adequate radiation factor (ISO/TS 7849-2:2009)
60.60 Standard published
Building products - Treatment of acoustics in product technical specifications
60.60 Standard published
Energy performance of buildings - Ventilation for buildings - Part 2: Interpretation of the requirements in EN 16798-1 - Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (Module M1-6)
60.60 Standard published
Railway applications - Acoustics - Measurement method for combined roughness, track decay rates and transfer functions
60.60 Standard published
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 5: Sounds levels due to the service equipment
60.60 Standard published
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces
90.60 Close of review
Acoustics - Noise test code for fastener driving tools - Engineering method
90.93 Standard confirmed
Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation
90.93 Standard confirmed
Acoustics - Test code for suspended ceilings - Sound absorption
90.93 Standard confirmed
Pumps - Rotodynamic pumps - Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise
90.93 Standard confirmed
Acoustics - Test code for drywall systems of plasterboard with steel studs - Airborne sound insulation
90.93 Standard confirmed
Energy performance of buildings - Ventilation for buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6
90.60 Close of review
Railway applications - Acoustics - Measuring of door audible warnings
60.60 Standard published
Railway Applications - Acoustics - Determination of the dynamic stiffness of elastic track components related to noise and vibration: Rail pads and rail fastening assemblies
60.60 Standard published
Railway applications - Acoustics - Measurement of source terms for environmental noise calculations
60.60 Standard published
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions (ISO 7574-1:1985)
90.93 Standard confirmed
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2: Methods for stated values for individual machines (ISO 7574-2:1985)
90.93 Standard confirmed
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3: Simple (transition) method for stated values for batches of machines (ISO 7574-3:1985)
90.93 Standard confirmed
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4: Methods for stated values for batches of machines (ISO 7574-4:1985)
90.93 Standard confirmed
Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings
90.93 Standard confirmed
Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids
60.60 Standard published
Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal
60.60 Standard published
Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements
60.60 Standard published
Electroacoustics - Hearing aids - Part 7: Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes
60.60 Standard published
Electroacoustics - Hearing aids - Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 5: 2 cm³ coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 6: Mechanical coupler for the measurement of bone vibrators
60.60 Standard published
Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz
60.60 Standard published
Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry
60.60 Standard published
Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance
60.60 Standard published
Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions
60.60 Standard published
Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses
60.60 Standard published
Electroacoustics - Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones
60.60 Standard published
Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
60.60 Standard published
Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
60.60 Standard published
Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
60.60 Standard published
Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
60.60 Standard published
Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
60.60 Standard published
Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters
60.60 Standard published
Electroacoustics - Specifications for personal sound exposure meters
60.60 Standard published
Electroacoustics - Specifications for personal sound exposure meters
60.60 Standard published
Electroacoustics - Specifications for personal sound exposure meters
60.60 Standard published
Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
60.60 Standard published
Electroacoustics - Octave-band and fractional-octave-band filters - Part 2: Pattern-evaluation tests
60.60 Standard published
Electroacoustics - Octave-band and fractional-octave-band filters - Part 2: Pattern-evaluation tests
60.60 Standard published
Electroacoustics - Octave-band and fractional-octave-band filters - Part 3: Periodic tests
60.60 Standard published
Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids
60.60 Standard published
Electroacoustics - Sound level meters - Part 1: Specifications
60.60 Standard published
Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
60.60 Standard published
Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
60.60 Standard published
Electroacoustics - Sound level meters - Part 3: Periodic tests
60.60 Standard published
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
60.60 Standard published
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
60.60 Standard published
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
60.60 Standard published
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure
60.60 Standard published
Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter
60.60 Standard published
Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids
60.60 Standard published
Electroacoustics - Hearing aids - Part 13: Requirements and methods of measurement for electromagnetic immunity to mobile digital wireless devices
60.60 Standard published
Electroacoustics - Hearing aids - Part 16: Definition and verification of hearing aid features
60.60 Standard published
Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements
60.60 Standard published
Electroacoustics - Hearing aids - Part 9: Methods of measurement of the performance characteristics of bone conduction hearing aids
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of sound sources close to the ear
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 8: Acoustic coupler for high-frequency measurements of hearing aids and earphones coupled to the ear by means of ear inserts
60.60 Standard published
Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 1: Procedures for free-field calibration of hydrophones
60.60 Standard published
Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 2: Procedures for low frequency pressure calibration
60.60 Standard published
Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration
60.60 Standard published
Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions
60.60 Standard published
Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
60.60 Standard published
Underwater acoustics - Calibration of acoustic wave vector receivers in the frequency range 5 Hz to 10 kHz
60.60 Standard published
Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2021)
60.60 Standard published
Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2021)
60.60 Standard published
Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2021)
60.60 Standard published
Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation (ISO 10140-3:2021)
60.60 Standard published
Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
60.60 Standard published
Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2021)
60.60 Standard published
Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 1: Method using standing wave ratio (ISO 10534-1:1996)
90.93 Standard confirmed
Acoustics - Determination of acoustic properties in impedance tubes - Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance (ISO 10534-2:2023)
60.60 Standard published
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008)
60.60 Standard published
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
60.60 Standard published
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002)
90.93 Standard confirmed
Acoustics and vibration - Laboratory measurement of vibro-acyustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003)
90.93 Standard confirmed
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008)
60.60 Standard published
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017)
60.60 Standard published
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017)
60.60 Standard published
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 3: Application to Type B elements when the junction has a substantial influence (ISO 10848-3:2017)
60.60 Standard published
Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 4: Application to junctions with at least one Type A element (ISO 10848-4:2017)
60.60 Standard published
Acoustics - Laboratory and field measurement of the flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 5: Radiation efficiencies of building elements (ISO 10848-5:2020)
60.60 Standard published
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
60.60 Standard published
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions - Amendment 1 (ISO 11200:2014/Amd 1:2018)
60.60 Standard published
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
60.60 Standard published
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
60.60 Standard published
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections - Amendment 1 (ISO 11202:2010/Amd 1:2020)
60.60 Standard published
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
60.60 Standard published
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level - Amendment 1 (ISO 11203:1995/Amd 1:2020)
60.60 Standard published
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
60.60 Standard published
Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
60.60 Standard published
Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
60.60 Standard published
Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
60.60 Standard published
Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997)
90.93 Standard confirmed
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
60.60 Standard published
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998)
90.93 Standard confirmed
Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996)
90.93 Standard confirmed
Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996/Cor 1:2007)
60.60 Standard published
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:2020)
60.60 Standard published
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:2020)
60.60 Standard published
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms (ISO/TR 11690-3:1997)
90.93 Standard confirmed
Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:2020)
60.60 Standard published
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:2023)
60.60 Standard published
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The close-proximity method (ISO 11819-2:2017)
60.60 Standard published
Acoustics - Measurements on silencers in situ (ISO 11820:1996)
90.93 Standard confirmed
Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997)
90.93 Standard confirmed
Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 1: Technique using a microphone in a real ear (MIRE technique) (ISO 11904-1:2002)
90.93 Standard confirmed
Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2021)
60.60 Standard published
Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)
60.60 Standard published
Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
60.60 Standard published
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO 12354-1:2017)
60.60 Standard published
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms (ISO 12354-2:2017)
60.60 Standard published
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound (ISO 12354-3:2017)
60.60 Standard published
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside (ISO 12354-4:2017)
60.60 Standard published
Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2020)
60.60 Standard published
Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 2: Sound absorption (ISO 12999-2:2020)
60.60 Standard published
Acoustics - Guidelines for noise control by silencers (ISO 14163:1998)
90.93 Standard confirmed
Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001)
90.93 Standard confirmed
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements (ISO 15186-1:2000)
90.93 Standard confirmed
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements (ISO 15186-2:2003)
60.60 Standard published
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 3: Laboratory measurements at low frequencies (ISO 15186-3:2002)
60.60 Standard published
Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000)
90.93 Standard confirmed
Acoustics - Measurement of sound pressure level from service equipment or activities in buildings - Engineering method (ISO 16032:2024)
60.60 Standard published
Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1: Heavyweight compact floor (ISO 16251-1:2014)
60.60 Standard published
Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 16283-1:2014)
60.60 Standard published
Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation - Amendment 1 (ISO 16283-1:2014/Amd 1:2017)
60.60 Standard published
Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2020)
60.60 Standard published
Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 3: Façade sound insulation (ISO 16283-3:2016)
60.60 Standard published
Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
60.60 Standard published
Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2015)
60.60 Standard published
Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2018)
60.60 Standard published
Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation (ISO 17201-2:2006)
60.60 Standard published
Acoustics - Noise from shooting ranges - Part 3: Sound propagation calculations (ISO 17201-3:2019)
60.60 Standard published
Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound (ISO 17201-4:2006)
90.93 Standard confirmed
Acoustics - Noise from shooting ranges - Part 5: Noise management (ISO 17201-5:2010)
60.60 Standard published
Acoustics - Noise from shooting ranges - Part 6: Sound pressure measurements close to the source for determining exposure to sound (ISO 17201-6:2021)
60.60 Standard published
Acoustics - Guidelines for noise control in offices and workrooms by means of acoustical screens (ISO 17624:2004)
90.93 Standard confirmed
Acoustics - Application of new measurement methods in building and room acoustics (ISO 18233:2006)
60.60 Standard published
Acoustics - Characterization of sources of structure-borne sound and vibration - Indirect measurement of blocked forces (ISO 20270:2019)
60.60 Standard published
Acoustics - Hearing aid fitting management (HAFM) (ISO 21388:2020)
60.60 Standard published
Acoustics - Hearing Aid Fitting Management - Part 2: Tele-services as part of hearing aid fitting management (tHAFM) (ISO 21388-2:2024)
60.60 Standard published
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)
60.60 Standard published
Acoustics - Test methods for the qualification of the acoustic environment - Part 1: Qualification of free-field environments (ISO 26101-1:2021)
60.60 Standard published
Acoustics - Test methods for the qualification of the acoustic environment - Part 2: Determination of the environmental correction (ISO 26101-2:2024)
60.60 Standard published
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2020)
60.60 Standard published
Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013)
60.60 Standard published
Railway applications - Acoustics - Noise measurement inside railbound vehicles (ISO 3381:2021)
60.60 Standard published
Acoustics - Measurement of room acoustic parameters - Part 1: Performance spaces (ISO 3382-1:2009)
60.60 Standard published
Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms (ISO 3382-2:2008)
60.60 Standard published
Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms (ISO 3382-2:2008/Cor 1:2009)
60.60 Standard published
Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2022)
60.60 Standard published
Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
90.92 Standard to be revised
Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2019)
60.60 Standard published
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)
60.60 Standard published
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
60.60 Standard published
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:2018)
60.60 Standard published
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
60.60 Standard published
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)
60.60 Standard published
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms - Amendment 1 (ISO 3745:2012/Amd 1:2017)
60.60 Standard published
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
60.60 Standard published
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
60.60 Standard published
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999)
90.93 Standard confirmed
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement - Amendment 1: Measurement uncertainty (ISO 3822-1:1999/Amd 1:2008)
60.60 Standard published
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)
90.93 Standard confirmed
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:2018)
60.60 Standard published
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances
90.93 Standard confirmed
Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:2017)
60.60 Standard published
Acoustics - Reference zero for the calibration of audiometric equipment - Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones (ISO 389-2:1994)
90.92 Standard to be revised
Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators (ISO 389-3:2016)
60.60 Standard published
Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994)
90.93 Standard confirmed
Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz (ISO 389-5:2006)
90.93 Standard confirmed
Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration (ISO 389-6:2007)
60.60 Standard published
Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:2019)
60.60 Standard published
Acoustics - Reference zero for the calibration of audiometric equipment - Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones (ISO 389-8:2004)
90.93 Standard confirmed
Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009)
60.60 Standard published
Acoustics - Hearing protectors - Part 1: Subjective method for the measurement of sound attenuation (ISO 4869-1:2018)
60.60 Standard published
Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:2018)
60.60 Standard published
Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007)
60.60 Standard published
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
60.60 Standard published
Acoustics - Determination of uncertainties associated with sound emission measures - Part 1: Sound power levels determined from sound pressure measurements (ISO 5114-1:2024)
60.60 Standard published
Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room (ISO 5135:2020)
60.60 Standard published
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
60.60 Standard published
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016)
60.60 Standard published
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels - Amendment 1 (ISO 6926:2016/Amd 1:2020)
60.60 Standard published
Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO 7029:2017)
60.60 Standard published
Acoustics - Statistical distribution of hearing thresholds related to age and gender - Amendment 1: Correction of parameter values for estimating the hearing threshold distribution (ISO 7029:2017/Amd 1:2024)
60.60 Standard published
Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2020)
60.60 Standard published
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2020)
60.60 Standard published
Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
60.60 Standard published
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2018)
60.60 Standard published
Quantities and units - Part 8: Acoustics (ISO 80000-8:2020)
60.60 Standard published
Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010)
60.60 Standard published
Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure-tone and narrow-band test signals (ISO 8253-2:2009)
60.60 Standard published
Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2022)
60.60 Standard published
Acoustics - Determination of airflow resistance - Part 1: Static airflow method (ISO 9053-1:2018)
60.60 Standard published
Acoustics - Determination of airflow resistance - Part 2: Alternating airflow method (ISO 9053-2:2020)
60.60 Standard published
Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015)
60.60 Standard published
Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009)
60.60 Standard published
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)
60.60 Standard published
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996)
90.93 Standard confirmed
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
60.60 Standard published
Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
60.60 Standard published
Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
60.60 Standard published
Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
60.60 Standard published
Amendment 4 - International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
60.60 Standard published
International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics
60.60 Standard published
Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids
60.60 Standard published
Electroacoustics - Hearing aids - Part 13: Requirements and methods of measurement for electromagnetic immunity to mobile digital wireless devices
60.60 Standard published
Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal
60.60 Standard published
Electroacoustics - Hearing aids - Part 16: Definition and verification of hearing aid features
60.60 Standard published
Amendment 1 - Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements
60.60 Standard published
Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements
60.60 Standard published
Electroacoustics - Hearing aids - Part 8: Methods of measurement of performance characteristics of hearing aids under simulated [<i>in situ</i>] working conditions
60.60 Standard published
Electroacoustics - Hearing aids - Part 9: Methods of measurement of the performance characteristics of bone conduction hearing aids
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 5: 2 cm<sup>3</sup> coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 6: Mechanical coupler for the measurement on bone vibrators
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of sound sources close to the ear
60.60 Standard published
Electroacoustics - Simulators of human head and ear - Part 8: Acoustic coupler for high-frequency measurements of hearing aids and earphones coupled to the ear by means of ear inserts
60.60 Standard published
Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz
60.60 Standard published
Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 1: Procedures for free-field calibration of hydrophones
60.60 Standard published
Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 2: Procedures for low frequency pressure calibration
60.60 Standard published
Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry
60.60 Standard published
Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration
60.60 Standard published
Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance
60.60 Standard published
Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions
60.60 Standard published
Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses
60.60 Standard published
Electroacoustics - Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones
60.60 Standard published
Amendment 1 - Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
60.60 Standard published
Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
60.60 Standard published
Corrigendum 1 - Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
60.60 Standard published
Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
60.60 Standard published
Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
60.60 Standard published
Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters
60.60 Standard published
Electroacoustics - Specifications for personal sound exposure meters
60.60 Standard published
Amendment 1 - Electroacoustics - Specifications for personal sound exposure meters
60.60 Standard published
Amendment 2 - Electroacoustics - Specifications for personal sound exposure meters
60.60 Standard published
Electroacoustics - Specifications for personal sound exposure meters
60.60 Standard published
Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
60.60 Standard published
Amendment 1 - Electroacoustics - Octave-band and fractional-octave band filters - Part 2: Pattern evaluation tests
60.60 Standard published
Electroacoustics - Octave-band and fractional-octave-band filters - Part 2: Pattern-evaluation tests
60.60 Standard published
Electroacoustics - Octave-band and fractional-octave-band filters - Part 3: Periodic tests
60.60 Standard published
Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
60.60 Standard published
Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids
60.60 Standard published
Electroacoustics - Sound level meters - Part 1: Specifications
60.60 Standard published
Amendment 1 - Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
60.60 Standard published
Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
60.60 Standard published
Electroacoustics - Sound level meters - Part 3: Periodic tests
60.60 Standard published
Amendment 1 - Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
60.60 Standard published
Amendment 2 - Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
60.60 Standard published
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
60.60 Standard published
Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure
60.60 Standard published
Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter
60.60 Standard published
Underwater acoustics - Calibration of acoustic wave vector receivers in the frequency range 5 Hz to 10 kHz
60.60 Standard published
Electroacoustics - Measurement microphones - Part 10: Absolute pressure calibration of microphones at low frequencies using calculable pistonphones
60.60 Standard published
Amendment 1 - Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures
60.60 Standard published
Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures
60.60 Standard published
Electroacoustics - Hearing aids - Method for measuring electroacoustic performance up to 16 kHz
60.60 Standard published
Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method
60.60 Standard published
Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products
60.60 Standard published
Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation
60.60 Standard published
Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation
60.60 Standard published
Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements
60.60 Standard published
Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment
60.60 Standard published
Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement
60.60 Standard published
Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 2: Structure-borne vibration measurements
90.93 Standard confirmed
Acoustics — Determination of sound absorption coefficient and impedance in impedance tubes — Part 1: Method using standing wave ratio
90.93 Standard confirmed
Acoustics — Determination of acoustic properties in impedance tubes — Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance
60.60 Standard published
Acoustics — Methods for the description and physical measurement of single impulses or series of impulses
90.92 Standard to be revised
Acoustics — Methods for the description and physical measurement of single impulses or series of impulses — Technical Corrigendum 1
60.60 Standard published
Acoustics — Specification of test tracks for measuring sound emitted by road vehicles and their tyres
60.60 Standard published
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines
90.93 Standard confirmed
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
90.93 Standard confirmed
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
90.93 Standard confirmed
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
90.93 Standard confirmed
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
90.93 Standard confirmed
Acoustics — In-situ determination of insertion loss of outdoor noise barriers of all types
90.93 Standard confirmed
Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document
90.93 Standard confirmed
Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence
90.93 Standard confirmed
Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 3: Application to Type B elements when the junction has a substantial influence
90.93 Standard confirmed
Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 4: Application to junctions with at least one Type A element
90.93 Standard confirmed
Acoustics — Laboratory and field measurement of the flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 5: Radiation efficiencies of building elements
60.60 Standard published
Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
90.93 Standard confirmed
Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions — Amendment 1
60.60 Standard published
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
90.93 Standard confirmed
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
90.93 Standard confirmed
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections — Amendment 1
60.60 Standard published
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
90.93 Standard confirmed
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level — Amendment 1
60.60 Standard published
Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
90.93 Standard confirmed
Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
90.93 Standard confirmed
Acoustics — Determination of sound insulation performances of enclosures — Part 1: Measurements under laboratory conditions (for declaration purposes)
90.93 Standard confirmed
Acoustics — Determination of sound insulation performances of enclosures — Part 2: Measurements in situ (for acceptance and verification purposes)
90.93 Standard confirmed
Acoustics — Sound absorbers for use in buildings — Rating of sound absorption
90.93 Standard confirmed
Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment
90.93 Standard confirmed
Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment — Technical Corrigendum 1
60.60 Standard published
Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 1: Noise control strategies
60.60 Standard published
Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 2: Noise control measures
60.60 Standard published
Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method
60.60 Standard published
Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical pass-by method
60.60 Standard published
Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 2: The close-proximity method
90.93 Standard confirmed
Acoustics — Measurement of the in situ sound attenuation of a removable screen
90.93 Standard confirmed
Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 1: Technique using a microphone in a real ear (MIRE technique)
90.93 Standard confirmed
Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 1: Technique using a microphone in a real ear (MIRE technique) — Technical Corrigendum 1
60.60 Standard published
Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 2: Technique using a manikin
60.60 Standard published
Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements
90.93 Standard confirmed
Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code
90.92 Standard to be revised
Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between rooms
90.93 Standard confirmed
Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 2: Impact sound insulation between rooms
90.93 Standard confirmed
Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 3: Airborne sound insulation against outdoor sound
90.93 Standard confirmed
Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 4: Transmission of indoor sound to the outside
90.93 Standard confirmed
Acoustics — Soundscape — Part 1: Definition and conceptual framework
90.93 Standard confirmed
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation
60.60 Standard published
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption
60.60 Standard published
Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 1: Extended surface method
60.60 Standard published
Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 2: Spot method for reflective surfaces
90.92 Standard to be revised
Acoustics — Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
90.93 Standard confirmed
Acoustics — Stationary audible warning devices used outdoors — Part 1: Field measurements for determination of sound emission quantities
90.93 Standard confirmed
Acoustics — Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance
90.93 Standard confirmed
Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 1: Laboratory measurements
90.93 Standard confirmed
Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 2: Field measurements
90.93 Standard confirmed
Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 3: Laboratory measurements at low frequencies
90.93 Standard confirmed
Acoustics — Noise control design procedures for open plant
90.92 Standard to be revised
Acoustics — Acoustic insulation for pipes, valves and flanges
90.92 Standard to be revised
Acoustics — Guidelines for noise control by enclosures and cabins
90.93 Standard confirmed
Acoustics — Measurement of sound pressure level from service equipment or activities in buildings — Engineering method
60.60 Standard published
Acoustics — Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up — Part 1: Heavyweight compact floor
90.20 Standard under periodical review
Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method
60.60 Standard published
Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation
90.93 Standard confirmed
Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation — Amendment 1
60.60 Standard published
Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation
60.60 Standard published
Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation
90.92 Standard to be revised
Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines
90.93 Standard confirmed
Acoustics — Preferred reference values for acoustical and vibratory levels
90.93 Standard confirmed
Acoustics — Noise from shooting ranges — Part 1: Determination of muzzle blast by measurement
90.93 Standard confirmed
Acoustics — Noise from shooting ranges — Part 2: Estimation of muzzle blast and projectile sound by calculation
90.92 Standard to be revised
Acoustics — Noise from shooting ranges — Part 3: Sound propagation calculations
90.92 Standard to be revised
Acoustics — Noise from shooting ranges — Part 4: Prediction of projectile sound
90.92 Standard to be revised
Acoustics — Noise from shooting ranges — Part 5: Noise management
90.93 Standard confirmed
Acoustics — Noise from shooting ranges — Part 6: Sound pressure measurements close to the source for determining exposure to sound
60.60 Standard published
Underwater acoustics — Quantities and procedures for description and measurement of underwater sound from ships — Part 1: Requirements for precision measurements in deep water used for comparison purposes
90.93 Standard confirmed
Underwater acoustics — Quantities and procedures for description and measurement of underwater sound from ships — Part 1: Requirements for precision measurements in deep water used for comparison purposes — Amendment 1
60.60 Standard published
Underwater acoustics — Quantities and procedures for description and measurement of underwater sound from ships — Part 2: Determination of source levels from deep water measurements
90.60 Close of review
Acoustics — Sound-scattering properties of surfaces — Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room
90.93 Standard confirmed
Acoustics — Sound-scattering properties of surfaces — Part 1: Measurement of the random-incidence scattering coefficient in a reverberation room — Amendment 1
60.60 Standard published
Acoustics — Sound-scattering properties of surfaces — Part 2: Measurement of the directional diffusion coefficient in a free field
90.93 Standard confirmed
Acoustics — Software for the calculation of sound outdoors — Part 1: Quality requirements and quality assurance
90.93 Standard confirmed
Acoustics — Guidelines for noise control in offices and workrooms by means of acoustical screens
90.93 Standard confirmed
Acoustics — Application of new measurement methods in building and room acoustics
90.93 Standard confirmed
Underwater acoustics — Measurement of radiated underwater sound from percussive pile driving
90.93 Standard confirmed
Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures
90.93 Standard confirmed
Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound pressure levels
90.93 Standard confirmed
Acoustics — Screens, furniture and single objects intended for interior use — Rating of sound absorption and sound reduction of elements based on laboratory measurements
90.93 Standard confirmed
Acoustics — Characterization of sources of structure-borne sound and vibration — Indirect measurement of blocked forces
90.92 Standard to be revised
Acoustics — Unattended monitoring of aircraft sound in the vicinity of airports
90.93 Standard confirmed
Acoustics — Unattended monitoring of aircraft sound in the vicinity of airports — Amendment 1
60.60 Standard published
Acoustics — Hearing aid fitting management — Part 2: Tele-services as part of hearing aid fitting management (tHAFM)
60.60 Standard published
Acoustics — Noise test code for compressors and vacuum pumps — Engineering method (Grade 2)
90.93 Standard confirmed
Acoustics — Experimental method for transposition of dynamic forces generated by an active component from a test bench to a receiving structure
60.60 Standard published
Acoustics — Measurement of speech level reduction of furniture ensembles and enclosures — Part 1: Laboratory method
60.60 Standard published
Acoustics — Test methods for the qualification of the acoustic environment — Part 1: Qualification of free-field environments
60.60 Standard published
Acoustics — Test methods for the qualification of the acoustic environment — Part 2: Determination of the environmental correction
60.60 Standard published
Acoustics — Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions
90.93 Standard confirmed
Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours
60.60 Standard published
Acoustics — Measurement of noise on board vessels — Technical Corrigendum 1
60.60 Standard published
Acoustics — Railway applications — Measurement of noise emitted by railbound vehicles
90.92 Standard to be revised
Railway applications — Acoustics — Noise measurement inside railbound vehicles
60.60 Standard published
Acoustics — Measurement of room acoustic parameters — Part 1: Performance spaces
90.93 Standard confirmed
Acoustics — Measurement of room acoustic parameters — Part 2: Reverberation time in ordinary rooms
90.93 Standard confirmed
Acoustics — Measurement of room acoustic parameters — Part 2: Reverberation time in ordinary rooms — Technical Corrigendum 1
60.60 Standard published
Acoustics — Measurement of room acoustic parameters — Part 3: Open plan offices
60.60 Standard published
Acoustics — Measurement of sound absorption in a reverberation room
90.93 Standard confirmed
Acoustics — Engineering method for measurement of noise emitted by accelerating road vehicles — Part 1: M and N categories
60.60 Standard published
Acoustics — Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 3: Indoor testing M and N categories
60.60 Standard published
Acoustics — Determination of sound power levels of noise sources — Guidelines for the use of basic standards
90.93 Standard confirmed
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms
90.92 Standard to be revised
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room
90.93 Standard confirmed
Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms
90.93 Standard confirmed
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane
90.92 Standard to be revised
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms
90.92 Standard to be revised
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms — Amendment 1
60.60 Standard published
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane
90.93 Standard confirmed
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment
90.93 Standard confirmed
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement
90.93 Standard confirmed
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement — Amendment 1: Measurement uncertainty
60.60 Standard published
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps and mixing valves
90.93 Standard confirmed
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances
90.60 Close of review
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances
90.93 Standard confirmed
Acoustics — Reference zero for the calibration of audiometric equipment — Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones
90.93 Standard confirmed
Acoustics — Reference zero for the calibration of audiometric equipment — Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones
90.93 Standard confirmed
Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators
90.93 Standard confirmed
Acoustics — Reference zero for the calibration of audiometric equipment — Part 4: Reference levels for narrow-band masking noise
90.93 Standard confirmed
Acoustics — Reference zero for the calibration of audiometric equipment — Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz
90.93 Standard confirmed
Acoustics — Reference zero for the calibration of audiometric equipment — Part 6: Reference threshold of hearing for test signals of short duration
90.93 Standard confirmed
Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions
90.20 Standard under periodical review
Acoustics — Reference zero for the calibration of audiometric equipment — Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones
90.93 Standard confirmed
Acoustics — Reference zero for the calibration of audiometric equipment — Part 9: Preferred test conditions for the determination of reference hearing threshold levels
90.93 Standard confirmed
Acoustics — Hearing protectors — Part 1: Subjective method for the measurement of sound attenuation
90.93 Standard confirmed
Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn
90.93 Standard confirmed
Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture
90.93 Standard confirmed
Acoustics — Hearing protectors — Part 6: Determination of sound attenuation of active noise reduction earmuffs
90.93 Standard confirmed
Acoustics — Declaration and verification of noise emission values of machinery and equipment
90.93 Standard confirmed
Acoustics — Determination of uncertainties associated with sound emission measures — Part 1: Sound power levels determined from sound pressure measurements
60.60 Standard published
Acoustics — Measurement of sound pressure levels in the interior of aircraft during flight
90.93 Standard confirmed
Acoustics — Measurement of sound pressure levels in the interior of aircraft during flight — Amendment 1
60.60 Standard published
Acoustics — Measurements of sound pressure level emitted by stationary road vehicles
90.93 Standard confirmed
Acoustics — Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room
60.60 Standard published
Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method
90.93 Standard confirmed
Acoustics — Methods for calculating loudness — Part 1: Zwicker method
90.92 Standard to be revised
Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method
90.92 Standard to be revised
Acoustics — Methods for calculating loudness — Part 3: Moore-Glasberg-Schlittenlacher method
90.92 Standard to be revised
Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
90.93 Standard confirmed
Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels — Amendment 1
60.60 Standard published
Acoustics — Statistical distribution of hearing thresholds related to age and gender
90.93 Standard confirmed
Acoustics — Statistical distribution of hearing thresholds related to age and gender — Amendment 1: Correction of parameter values for estimating the hearing threshold distribution
60.60 Standard published
Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation
60.60 Standard published
Acoustics — Rating of sound insulation in buildings and of building elements — Part 2: Impact sound insulation
60.60 Standard published
Acoustics — Frequency-weighting characteristic for infrasound measurements
90.93 Standard confirmed
Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss
90.93 Standard confirmed
Underwater acoustics — Measurement of radiated underwater sound from percussive pile driving — In situ determination of the insertion loss of barrier control measures underwater
60.60 Standard published
Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions
90.93 Standard confirmed
Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 2: Methods for stated values for individual machines
90.93 Standard confirmed
Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 3: Simple (transition) method for stated values for batches of machines
90.93 Standard confirmed
Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines
90.93 Standard confirmed
Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment
90.93 Standard confirmed
Acoustics — Audiometric test methods — Part 1: Pure-tone air and bone conduction audiometry
90.93 Standard confirmed
Acoustics — Audiometric test methods — Part 2: Sound field audiometry with pure-tone and narrow-band test signals
90.93 Standard confirmed
Acoustics — Audiometric test methods — Part 3: Speech audiometry
60.60 Standard published
Acoustics — Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment — Engineering method
90.93 Standard confirmed
Acoustics — Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment — Engineering method — Amendment 1
60.60 Standard published
Acoustics — Determination of dynamic stiffness — Part 1: Materials used under floating floors in dwellings
90.93 Standard confirmed
Acoustics — Determination of airflow resistance — Part 1: Static airflow method
90.92 Standard to be revised
Acoustics — Determination of airflow resistance — Part 2: Alternating airflow method
60.60 Standard published
Acoustics — Determination of high-frequency sound power levels emitted by machinery and equipment
90.93 Standard confirmed
Acoustics — Declared noise emission values of information technology and telecommunications equipment
90.93 Standard confirmed
Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Measurement of velocity at the contact points of machinery when resiliently mounted
90.93 Standard confirmed
Acoustics — Determination of occupational noise exposure — Engineering method
90.92 Standard to be revised
Acoustics — Attenuation of sound during propagation outdoors — Part 1: Calculation of the absorption of sound by the atmosphere
90.93 Standard confirmed
Acoustics — Attenuation of sound during propagation outdoors — Part 2: Engineering method for the prediction of sound pressure levels outdoors
60.60 Standard published
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
90.92 Standard to be revised
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
90.92 Standard to be revised
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning
90.92 Standard to be revised
Acoustics — Measurement of noise emitted by two-wheeled mopeds in motion — Engineering method
90.93 Standard confirmed
Acoustics — Description, measurement and assessment of environmental noise — Part 3: Objective method for the measurement of prominence of impulsive sounds and for adjustment of L Aeq
60.60 Standard published
Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning
90.93 Standard confirmed
Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 2: Introduction to the physics of low-noise design
90.93 Standard confirmed
Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 3: Sound propagation and noise prediction in workrooms
90.93 Standard confirmed
Acoustics — Software for the calculation of sound outdoors — Part 2: General recommendations for test cases and quality assurance interface
60.60 Standard published
Acoustics — Software for the calculation of sound outdoors — Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1
90.92 Standard to be revised
Acoustics — Software for the calculation of sound outdoors — Part 4: Recommendations for a quality assured implementation of the COMMISSION DIRECTIVE (EU) 2015/996 in software according to ISO 17534-1
60.60 Standard published
Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Reference tyres
90.92 Standard to be revised
Acoustics — Soundscape — Part 2: Data collection and reporting requirements
90.20 Standard under periodical review
Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method
90.93 Standard confirmed
Acoustics — Temperature influence on tyre/road noise measurement — Part 2: Correction for temperature when testing with the pass-by methods
60.60 Standard published
Acoustics — Stationary audible warning devices used outdoors — Part 2: Precision methods for determination of sound emission quantities
90.93 Standard confirmed
Acoustics — Assessment of noise annoyance by means of social and socio-acoustic surveys
90.93 Standard confirmed
Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method
60.60 Standard published
Acoustics — Hearing protectors — Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects
90.93 Standard confirmed
Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 1: Survey method using a fixed radiation factor
90.93 Standard confirmed
Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 2: Engineering method including determination of the adequate radiation factor
90.93 Standard confirmed
