Main menu
Welding - Post-weld heat treatment parameters for steels (ISO/TR 14745:2015)
60.60 Standard published
Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
60.60 Standard published
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO/TR 17641-3:2005)
60.60 Standard published
Welding - Comparison of standardised methods for the avoidance of cold cracks (ISO/TR 17844:2004)
60.60 Standard published
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
60.60 Standard published
Welding - Grouping systems for materials - American materials (ISO 20173:2018)
60.60 Standard published
Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2020)
60.60 Standard published
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012)
60.60 Standard published
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012)
60.60 Standard published
Welding and allied processes - Designation system for imperfections (ISO/TS 17845:2004)
90.93 Standard confirmed
Numerical welding simulation - Execution and documentation (ISO/TS 18166:2016)
60.60 Standard published
Terms and definitions for welding purposes in relation with EN 1792
60.60 Standard published
Gas welding equipment - Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering - Measurement method
60.60 Standard published
Welding - Methods for assessing imperfections in metallic structures
60.60 Standard published
Welding of reinforcing steel - Tack weldability - Test methods and performance requirements
60.60 Standard published
Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence
60.60 Standard published
Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes
60.60 Standard published
Plastics - Welding of thermoplastics - Specification of welding procedures
90.93 Standard confirmed
Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
90.93 Standard confirmed
Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels
90.60 Close of review
Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels
60.60 Standard published
Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
90.20 Standard under periodical review
Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys
90.93 Standard confirmed
Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys
60.60 Standard published
Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel
90.93 Standard confirmed
Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding
90.20 Standard under periodical review
Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding
90.93 Standard confirmed
Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons
90.93 Standard confirmed
Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements
90.92 Standard to be revised
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
60.60 Standard published
Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
90.93 Standard confirmed
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
60.60 Standard published
Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
60.60 Standard published
Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
90.93 Standard confirmed
Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
60.60 Standard published
Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
90.93 Standard confirmed
Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes
90.93 Standard confirmed
Gas infrastructure - Welding steel pipework - Functional requirements
60.60 Standard published
Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
90.93 Standard confirmed
Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
60.60 Standard published
Gas welding equipment - Small kits for gas brazing and welding
90.93 Standard confirmed
Gas welding equipment - Thermoplastic hoses for welding and allied processes
90.93 Standard confirmed
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
90.60 Close of review
Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding)
90.93 Standard confirmed
Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000 modified)
90.92 Standard to be revised
Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000 modified)
60.60 Standard published
Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
90.92 Standard to be revised
Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys
90.92 Standard to be revised
Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
90.92 Standard to be revised
Railway applications - Infrastructure - Flash butt welding of new rails - Part 1: R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails in a fixed plant
90.20 Standard under periodical review
Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant
90.93 Standard confirmed
Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction
90.92 Standard to be revised
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes
90.93 Standard confirmed
Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds
60.60 Standard published
Railway applications - Welding of railway vehicles and components - Part 1: General
60.60 Standard published
Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer
60.60 Standard published
Railway applications - Welding of railway vehicles and components - Part 3: Design requirements
60.60 Standard published
Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
60.60 Standard published
Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation
60.60 Standard published
Railway applications - Welding of railway vehicles and components - Part 6: Maintenance welding requirements
60.60 Standard published
Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding
90.60 Close of review
Railway applications - Track - Restoration of rails by electric arc welding
90.93 Standard confirmed
Space product assurance - Welding of metallic materials for flight hardware
60.60 Standard published
Space product assurance - Welding of metallic materials for flight hardware
60.60 Standard published
Railway applications - Infrastructure - Aluminothermic welding of grooved rails
90.93 Standard confirmed
Welding - Basic welded joint details in steel - Part 1: Pressurized components
90.93 Standard confirmed
Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components
90.20 Standard under periodical review
Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components
90.60 Close of review
Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)
90.93 Standard confirmed
Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications
90.93 Standard confirmed
Welding - Multilingual list of terms for welding and related processes
90.93 Standard confirmed
Slots in plates for projection welding machines (ISO 865:1981)
90.93 Standard confirmed
Spot welding equipment - Taper plug gauges and taper ring gauges (ISO 5822:1988)
90.93 Standard confirmed
Insulation caps and bushes for resistance welding equipment (ISO 7931:1985)
90.93 Standard confirmed
Qualification test of welders - Fusion welding - Part 6: Cast irons
90.93 Standard confirmed
Resistance spot welding equipment - Cooling tubes (ISO 9313:1989)
90.93 Standard confirmed
Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding - Joint preparations for steel (ISO 9692:1992)
90.93 Standard confirmed
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 007: Hermetic receptacle with round flange attached by welding or brazing - Product standard
60.60 Standard published
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard
60.60 Standard published
Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14 000 kPa nominal pressure
90.93 Standard confirmed
Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14 000 kPa nominal pressure
60.60 Standard published
Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure
90.93 Standard confirmed
Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure
60.60 Standard published
Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding
90.93 Standard confirmed
Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm < = D < = 5,0 mm - Dimensions
90.93 Standard confirmed
Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0,5 mm < D < 5,0 mm - Dimensions
90.93 Standard confirmed
Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm < = D < = 5,0 mm - Dimensions
90.93 Standard confirmed
Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod
90.93 Standard confirmed
Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3AI) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn3) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels
60.60 Standard published
Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
90.93 Standard confirmed
Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies
90.93 Standard confirmed
Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments
90.93 Standard confirmed
Aerospace series - Steel FE-WM 3504 (X4CrNiMo16-5-1) - Air melted - Filler metal for welding - Wire and rod
90.93 Standard confirmed
Aerospace series - Filler metals for welding - Part 001: Technical specification
60.60 Standard published
Aerospace series - Filler metals for welding - Part 002: Authorized filler metals
60.60 Standard published
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-81: Cables for general applications - Cables with crosslinked elastomeric covering for arc welding
90.93 Standard confirmed
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
90.93 Standard confirmed
Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
90.93 Standard confirmed
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
60.60 Standard published
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
60.60 Standard published
Arc welding equipment - Part 12: Coupling devices for welding cables
60.60 Standard published
Arc welding equipment - Part 4: Periodic inspection and testing
60.60 Standard published
Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
60.60 Standard published
Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation
60.60 Standard published
Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation
60.60 Standard published
Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements
60.60 Standard published
Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc welding equipment
60.60 Standard published
Gas welding equipment - Safety devices - Part 1: Incorporating a flame (flashback) arrestor
90.60 Close of review
Gas welding equipment - Safety devices - Part 2: Not incorporating a flame (flashback) arrestor
90.60 Close of review
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
60.60 Standard published
Arc welding equipment - Part 1: Welding power sources
60.60 Standard published
Arc welding equipment - Part 1: Welding power sources
60.60 Standard published
Arc welding equipment - Part 1: Welding power sources
60.60 Standard published
Arc welding equipment - Part 13: Welding current return clamp
60.60 Standard published
Arc welding equipment - Part 14: Calibration, validation and consistency testing
60.60 Standard published
Arc welding equipment - Part 14: Calibration, validation and consistency testing
60.60 Standard published
Arc welding equipment - Part 3: Arc striking and stabilizing devices
60.60 Standard published
Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
60.60 Standard published
Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements
60.60 Standard published
Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 1: Product family standard
60.60 Standard published
Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 3: Resistance welding equipment
60.60 Standard published
Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 3: Resistance welding equipment
60.60 Standard published
Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2018)
60.60 Standard published
Gas welding equipment - Marking for equipment used for gas welding, cutting and allied processes (ISO 10225:2013)
60.60 Standard published
Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2022)
60.60 Standard published
Resistance welding equipment - Transformers - Integrated transformers for welding guns (ISO 10656:2016, Corrected version 2016-08)
60.60 Standard published
Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015)
60.60 Standard published
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)
60.60 Standard published
Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000)
90.93 Standard confirmed
Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions (ISO 1089:2023)
60.60 Standard published
Protective clothing for use in welding and allied processes (ISO 11611:2015)
60.60 Standard published
Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016)
60.60 Standard published
Welding consumables - Tubular-cored electrodes for gas-shielded and non-gas-shielded metal arc welding of nickel and nickel alloys - Classification (ISO 12153:2022)
60.60 Standard published
Welding - Laser-arc hybrid welding of steels, nickel and nickel alloys - Quality levels for imperfections (ISO 12932:2013)
60.60 Standard published
Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017)
60.60 Standard published
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
60.60 Standard published
Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/Amd 1:2021)
60.60 Standard published
Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:2023)
60.60 Standard published
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
60.60 Standard published
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2017)
60.60 Standard published
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016)
60.60 Standard published
Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2023)
60.60 Standard published
Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2019)
60.60 Standard published
Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
60.60 Standard published
Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016)
60.60 Standard published
Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
60.60 Standard published
Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds (ISO 14272:2016, Corrected version 2016-09-01)
60.60 Standard published
Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds (ISO 14273:2016)
60.60 Standard published
Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds (ISO 14323:2015)
60.60 Standard published
Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints (ISO/FDIS 14324:2003)
90.93 Standard confirmed
Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020)
60.60 Standard published
Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017)
60.60 Standard published
Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2010)
60.60 Standard published
Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2024)
60.60 Standard published
Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013)
60.60 Standard published
Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2013)
60.60 Standard published
Welding - Arc stud welding of metallic materials (ISO 14555:2017)
60.60 Standard published
Welding coordination - Tasks and responsibilities (ISO 14731:2019)
60.60 Standard published
Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
60.60 Standard published
Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008)
60.60 Standard published
Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000)
90.93 Standard confirmed
Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000)
90.93 Standard confirmed
Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000)
90.93 Standard confirmed
Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy (ISO 14744-5:2000)
90.93 Standard confirmed
Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000)
90.93 Standard confirmed
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009)
60.60 Standard published
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging (ISO 15011-2:2009)
60.60 Standard published
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3:2009)
60.60 Standard published
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2017)
60.60 Standard published
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry (ISO 15011-5:2011)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2019)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2019)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedures specification - Part 3: Electron beam welding (ISO 15609-3:2004)
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011, Corrected version 2011-12-01)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 6: Laser-arc hybrid welding (ISO 15609-6:2013)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2024)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2024)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure specification (ISO 15612:2018)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbaric dry welding (ISO 15614-10:2005)
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys - Amendment 1 (ISO 15614-1:2017/Amd 1:2019)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2021)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2023)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005/Cor 2:2009)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons (ISO 15614-3:2008)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005/Cor 1:2007)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016)
60.60 Standard published
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016)
60.60 Standard published
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2022)
60.60 Standard published
Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)
90.93 Standard confirmed
Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)
90.93 Standard confirmed
Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
90.93 Standard confirmed
Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 4: Machines with 2-D moving optics (ISO 15616-4:2008)
60.60 Standard published
Qualification testing of welders for underwater welding - Part 1: Hyperbaric wet welding (ISO 15618-1:2016)
60.60 Standard published
Qualification testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001)
90.93 Standard confirmed
Welding - Friction welding of metallic materials (ISO 15620:2019)
60.60 Standard published
Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)
60.60 Standard published
Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
60.60 Standard published
Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld (ISO 15792-3:2011)
60.60 Standard published
Eye and face protection for occupational use - Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021)
60.60 Standard published
Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006)
60.60 Standard published
Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels (ISO 16433:2006)
60.60 Standard published
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)
60.60 Standard published
Welding - Micro joining of 2nd generation high temperature superconductors - Part 1: General requirements for the procedure (ISO 17279-1:2018)
60.60 Standard published
Welding - Micro joining of 2nd generation high temperature superconductors - Part 2: Qualification for welding and testing personnel (ISO 17279-2:2018)
60.60 Standard published
Welding - Micro joining of second generation high temperature superconductors - Part 3: Test methods for joints (ISO 17279-3:2021)
60.60 Standard published
Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2022)
60.60 Standard published
Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015)
60.60 Standard published
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2017)
60.60 Standard published
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification - Amendment 1 (ISO 17633:2017/Amd 1:2021)
60.60 Standard published
Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)
60.60 Standard published
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17641-1:2004)
90.93 Standard confirmed
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17641-2:2015)
60.60 Standard published
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17642-1:2004)
90.93 Standard confirmed
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005)
60.60 Standard published
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005)
60.60 Standard published
Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (ISO 17652-1:2003)
90.93 Standard confirmed
Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003)
90.93 Standard confirmed
Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003)
90.93 Standard confirmed
Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003)
90.93 Standard confirmed
Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012)
60.60 Standard published
Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)
60.60 Standard published
Resistance welding - Welding current measurement for resistance welding - Part 1: Guidelines for measurement (ISO 17657-1:2005)
60.60 Standard published
Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with current sensing coil (ISO 17657-2:2005)
60.60 Standard published
Resistance welding - Welding current measurement for resistance welding - Part 3: Current sensing coil (ISO 17657-3:2005)
60.60 Standard published
Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system (ISO 17657-4:2005)
60.60 Standard published
Resistance welding - Welding current measurement for resistance welding - Part 5: Verification of welding current measuring system (ISO 17657-5:2005)
60.60 Standard published
Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology (ISO 17658:2002)
60.60 Standard published
Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002)
90.93 Standard confirmed
Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006)
60.60 Standard published
Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006)
60.60 Standard published
Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016)
60.60 Standard published
Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2023)
60.60 Standard published
Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding (ISO 17677-1:2021)
60.60 Standard published
Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification (ISO 17777:2016)
60.60 Standard published
Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2015)
60.60 Standard published
Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2023)
60.60 Standard published
Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2018)
60.60 Standard published
Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017)
60.60 Standard published
Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022)
60.60 Standard published
Resistance welding - Weldability - Part 2: Evaluation procedures for weldability in spot welding (ISO 18278-2:2016)
60.60 Standard published
Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot weld bonding (ISO 18278-3:2017)
60.60 Standard published
Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2019)
60.60 Standard published
Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material (ISO 18594:2007)
60.60 Standard published
Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing (ISO 18595:2021)
60.60 Standard published
Friction stir spot welding - Aluminium - Part 1: Vocabulary (ISO 18785-1:2018)
60.60 Standard published
Friction stir spot welding - Aluminium - Part 2: Design of weld joints (ISO 18785-2:2018)
60.60 Standard published
Friction stir spot welding - Aluminium - Part 3: Qualification of welding personnel (ISO 18785-3:2018)
60.60 Standard published
Friction stir spot welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 18785-4:2018)
60.60 Standard published
Friction stir spot welding - Aluminium - Part 5: Quality and inspection requirements (ISO 18785-5:2018)
60.60 Standard published
Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification (ISO 19288:2016)
60.60 Standard published
Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
60.60 Standard published
Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017)
60.60 Standard published
Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 1: Requirements and test methods for protection against risks in foundries - Amendment 1 (ISO 20349-1:2017/Amd 1:2020)
60.60 Standard published
Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)
60.60 Standard published
Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2: Requirements and test methods for protection against risks in welding and allied processes - Amendment 1 (ISO 20349-2:2017/Amd 1:2020)
60.60 Standard published
Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification (ISO 20378:2017)
60.60 Standard published
Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements (ISO 21904-1:2020)
60.60 Standard published
Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 2: Requirements for testing and marking of separation efficiency (ISO 21904-2:2020)
60.60 Standard published
Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO 21904-3:2018)
60.60 Standard published
Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: Determination of the minimum air volume flow rate of capture devices (ISO 21904-4:2020)
60.60 Standard published
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012)
60.60 Standard published
Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005)
60.60 Standard published
Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism (ISO 22827-2:2005)
60.60 Standard published
Resistance welding equipment - Transformers - Integrated transformer-rectifier units for welding guns operating at 1 000 Hz (ISO 22829:2017)
60.60 Standard published
Welding consumables - Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:2018)
60.60 Standard published
Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020)
60.60 Standard published
Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2018)
60.60 Standard published
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2019)
60.60 Standard published
Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009)
60.60 Standard published
Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009/Amd 1:2015)
60.60 Standard published
Friction stir welding - Aluminium - Part 1: Vocabulary (ISO 25239-1:2020)
60.60 Standard published
Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2020)
60.60 Standard published
Friction stir welding - Aluminium - Part 3: Qualification of welding operators (ISO 25239-3:2020)
60.60 Standard published
Friction stir welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 25239-4:2020)
60.60 Standard published
Friction stir welding - Aluminium - Part 5: Quality and inspection requirements (ISO 25239-5:2020)
60.60 Standard published
Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2019, Corrected version 2021-09)
60.60 Standard published
Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2020)
60.60 Standard published
Welding and allied processes - Vocabulary - Part 2: Health and safety (ISO 25901-2:2022)
60.60 Standard published
Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (ISO 25980:2023, Corrected version 2023-08)
60.60 Standard published
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2017)
60.60 Standard published
Dentistry - Laser welding and filler materials (ISO 28319:2018)
60.60 Standard published
Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification (ISO 3580:2017)
60.60 Standard published
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
60.60 Standard published
Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2018)
60.60 Standard published
Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2019, Corrected version 2021-05)
60.60 Standard published
Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
60.60 Standard published
Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
60.60 Standard published
Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
60.60 Standard published
Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
60.60 Standard published
Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
60.60 Standard published
Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 series (ISO 3834-6:2024)
60.60 Standard published
Welding, brazing, soldering and cutting - Nomenclature of processes and reference numbers (ISO 4063:2023)
60.60 Standard published
Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2019)
60.60 Standard published
Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests (ISO 5172:2006)
90.93 Standard confirmed
Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests - Amendment 1 (ISO 5172:2006/Amd 1:2012)
60.60 Standard published
Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests (ISO 5172:2006/Amd 2:2015)
60.60 Standard published
Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor (ISO 5175-1:2017)
60.60 Standard published
Gas welding equipment - Safety devices - Part 2: Devices not incorporating a flame (flashback) arrestor (ISO 5175-2:2017, Corrected version 2019-01)
60.60 Standard published
Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016)
60.60 Standard published
Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998)
90.93 Standard confirmed
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000)
90.93 Standard confirmed
Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2017)
60.60 Standard published
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2023)
60.60 Standard published
Resistance welding - Spot welding electrode caps (ISO 5821:2009)
60.60 Standard published
Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014)
60.60 Standard published
Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001)
90.93 Standard confirmed
Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984)
60.60 Standard published
Resistance spot welding - Male electrode caps (ISO 5830:1984)
60.60 Standard published
Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017)
60.60 Standard published
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
60.60 Standard published
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2013)
60.60 Standard published
Resistance welding - Resistance welding equipment - Mechanical and electrical requirements (ISO 669:2016)
60.60 Standard published
Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2020)
60.60 Standard published
Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)
60.60 Standard published
Welding and allied processes - Welding positions (ISO 6947:2019)
60.60 Standard published
Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995)
60.60 Standard published
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010)
60.60 Standard published
Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015)
60.60 Standard published
Resistance welding - Embossed projection welding - Projections for resistance welding (ISO 8167:2021)
60.60 Standard published
Resistance welding equipment - Water-cooled secondary connection cables(ISO 8205:2021)
60.60 Standard published
Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2018)
60.60 Standard published
Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016)
60.60 Standard published
Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016)
60.60 Standard published
Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016)
60.60 Standard published
Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2023)
60.60 Standard published
Gas tightness of equipment for gas welding and allied processes (ISO 9090:2019)
60.60 Standard published
Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013)
60.60 Standard published
Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010)
60.60 Standard published
Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010/AMD 1:2013)
60.60 Standard published
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
60.60 Standard published
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
90.93 Standard confirmed
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
90.93 Standard confirmed
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
90.93 Standard confirmed
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)
90.93 Standard confirmed
Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013)
60.60 Standard published
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:2024)
60.60 Standard published
Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016)
60.60 Standard published
Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003)
90.93 Standard confirmed
Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 851: Electric welding
60.60 Standard published
International Electrotechnical Vocabulary (IEV) - Part 851: Electric welding
60.60 Standard published
Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
60.60 Standard published
Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
60.60 Standard published
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
60.60 Standard published
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
60.60 Standard published
Arc welding equipment - Part 12: Coupling devices for welding cables
60.60 Standard published
Arc welding equipment - Part 13: Welding current return clamp
60.60 Standard published
Corrigendum 1 - Arc welding equipment - Part 14: Calibration, validation and consistency testing
60.60 Standard published
Arc welding equipment - Part 14: Calibration, validation and consistency testing
60.60 Standard published
Arc welding equipment - Part 2: Liquid cooling systems
60.60 Standard published
Arc welding equipment - Part 3: Arc striking and stabilizing devices
60.60 Standard published
Arc welding equipment - Part 4: Periodic inspection and testing
60.60 Standard published
Arc welding equipment - Part 6: Limited duty equipment
60.60 Standard published
Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
60.60 Standard published
Corrigendum 1 - Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation
60.60 Standard published
Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation
60.60 Standard published
Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements
60.60 Standard published
Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 1: Product family standard
60.60 Standard published
Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc welding equipment
60.60 Standard published
Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 3: Resistance welding equipment
60.60 Standard published
Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections
90.93 Standard confirmed
Gas welding equipment — Marking for equipment used for gas welding, cutting and allied processes
90.60 Close of review
Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds
60.60 Standard published
Resistance welding equipment — Transformers — Integrated transformers for welding guns
90.93 Standard confirmed
Welding consumables — Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron — Classification
90.93 Standard confirmed
Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles
90.92 Standard to be revised
Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 2: Sampling of gases
90.92 Standard to be revised
Resistance welding equipment — Electrode taper fits for spot welding equipment — Dimensions
60.60 Standard published
Protective clothing for use in welding and allied processes
90.92 Standard to be revised
Specification and qualification of welding procedures for production welding of steel castings
90.92 Standard to be revised
Welding consumables — Tubular-cored electrodes for gas-shielded and non-gas-shielded metal arc welding of nickel and nickel alloys — Classification
60.60 Standard published
Welding — Laser-arc hybrid welding of steels, nickel and nickel alloys — Quality levels for imperfections
90.60 Close of review
Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines
90.20 Standard under periodical review
Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
90.92 Standard to be revised
Welding — Studs and ceramic ferrules for arc stud welding
90.92 Standard to be revised
Welding — Studs and ceramic ferrules for arc stud welding — Amendment 1
60.60 Standard published
Welding — General tolerances for welded constructions — Dimensions for lengths and angles, shape and position
60.60 Standard published
Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
90.60 Close of review
Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — General requirements
90.93 Standard confirmed
Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification
90.93 Standard confirmed
Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification
60.60 Standard published
Welding consumables — Fluxes for submerged arc welding and electroslag welding — Classification
90.20 Standard under periodical review
Welding consumables — Gases and gas mixtures for fusion welding and allied processes
90.93 Standard confirmed
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
90.93 Standard confirmed
Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
90.93 Standard confirmed
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
90.93 Standard confirmed
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
90.93 Standard confirmed
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
90.93 Standard confirmed
Resistance spot welding — Destructive tests of welds — Method for the fatigue testing of spot welded joints
90.93 Standard confirmed
Welding consumables — Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels — Classification
60.60 Standard published
Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification
90.92 Standard to be revised
Welding consumables — Procurement of filler materials and fluxes
90.92 Standard to be revised
Resistance welding — Procedure for spot welding of uncoated and coated low-carbon steels
60.60 Standard published
Quality requirements for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements
90.93 Standard confirmed
Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements
90.93 Standard confirmed
Welding coordination — Tasks and responsibilities
90.20 Standard under periodical review
Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
90.92 Standard to be revised
Welding — Acceptance inspection of electron beam welding machines — Part 1: Principles and acceptance conditions
90.20 Standard under periodical review
Welding — Acceptance inspection of electron beam welding machines — Part 2: Measurement of accelerating voltage characteristics
90.93 Standard confirmed
Welding — Acceptance inspection of electron beam welding machines — Part 3: Measurement of beam current characteristics
90.93 Standard confirmed
Welding — Acceptance inspection of electron beam welding machines — Part 4: Measurement of welding speed
90.93 Standard confirmed
Welding — Acceptance inspection of electron beam welding machines — Part 5: Measurement of run-out accuracy
90.93 Standard confirmed
Welding — Acceptance inspection of electron beam welding machines — Part 6: Measurement of stability of spot position
90.93 Standard confirmed
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis
90.93 Standard confirmed
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging
90.93 Standard confirmed
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 3: Determination of ozone emission rate during arc welding
90.93 Standard confirmed
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 4: Fume data sheets
90.93 Standard confirmed
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials — General rules
60.60 Standard published
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding
60.60 Standard published
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 2: Gas welding
60.60 Standard published
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 3: Electron beam welding
90.20 Standard under periodical review
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 4: Laser beam welding
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 5: Resistance welding
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 6: Laser-arc hybrid welding
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables
60.60 Standard published
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
60.60 Standard published
Specification and qualification of welding procedures for metallic materials — Qualification by adoption of a standard welding procedure specification
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test
90.92 Standard to be revised
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 10: Hyperbaric dry welding
90.20 Standard under periodical review
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 11: Electron and laser beam welding
90.92 Standard to be revised
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys — Amendment 1
60.60 Standard published
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 12: Spot, seam and projection welding
60.60 Standard published
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Upset (resistance butt) and flash welding
60.60 Standard published
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys
90.60 Close of review
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys
90.92 Standard to be revised
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys — Technical Corrigendum 1
60.60 Standard published
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys — Technical Corrigendum 2
60.60 Standard published
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 3: Fusion welding of non-alloyed and low-alloyed cast irons
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 4: Finishing welding of aluminium castings
90.20 Standard under periodical review
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 4: Finishing welding of aluminium castings — Technical Corrigendum 1
60.60 Standard published
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 5: Arc welding of titanium, zirconium and their alloys
60.60 Standard published
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 6: Arc and gas welding of copper and its alloys
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 7: Overlay welding
90.93 Standard confirmed
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 8: Welding of tubes to tube-plate joints
90.93 Standard confirmed
Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — Safety requirements in high-pressure devices
60.60 Standard published
Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 1: General principles, acceptance conditions
90.20 Standard under periodical review
Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 2: Measurement of static and dynamic accuracy
90.20 Standard under periodical review
Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 3: Calibration of instruments for measurement of gas flow and pressure
90.20 Standard under periodical review
Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 4: Machines with 2-D moving optics
90.20 Standard under periodical review
Qualification testing of welders for underwater welding — Part 1: Hyperbaric wet welding
90.93 Standard confirmed
Qualification testing of welders for underwater welding — Part 2: Diver-welders and welding operators for hyperbaric dry welding
90.93 Standard confirmed
Welding — Friction welding of metallic materials
90.20 Standard under periodical review
Welding consumables — Test methods — Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys
60.60 Standard published
Welding consumables — Test methods — Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel
60.60 Standard published
Welding consumables — Test methods — Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld
90.93 Standard confirmed
Eye and face protection for occupational use — Part 2: Additional requirements for protectors used during welding and related techniques
60.60 Standard published
Welding for aerospace applications — Resistance spot and seam welding
90.93 Standard confirmed
Resistance welding — Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)
90.93 Standard confirmed
Resistance welding — Procedure for seam welding of uncoated and coated low carbon steels
90.93 Standard confirmed
Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification
90.92 Standard to be revised
Welding — Micro joining of 2nd generation high temperature superconductors — Part 1: General requirements for the procedure
90.60 Close of review
Welding — Micro joining of 2nd generation high temperature superconductors — Part 2: Qualification for welding and testing personnel
90.60 Close of review
Welding — Micro joining of second generation high temperature superconductors — Part 3: Test methods for joints
60.60 Standard published
Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
60.60 Standard published
Respiratory protective devices — Performance requirements — Part 7: Special application marine, mining, welding, and abrasive blasting - Filtering RPD and supplied breathable gas RPD
60.60 Standard published
Welding for aerospace applications — Welding information in design documents
90.93 Standard confirmed
Steel structures — Execution of structural steelwork — Part 5: Welding
60.60 Standard published
Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels — Classification
90.93 Standard confirmed
Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification
90.92 Standard to be revised
Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification — Amendment 1
60.60 Standard published
Welding consumables — Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels — Classification
90.93 Standard confirmed
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 1: General
90.20 Standard under periodical review
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
90.93 Standard confirmed
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 1: General
90.20 Standard under periodical review
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
90.20 Standard under periodical review
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests
90.20 Standard under periodical review
Welding — Test for shop primers in relation to welding and allied processes — Part 1: General requirements
90.20 Standard under periodical review
Welding — Test for shop primers in relation to welding and allied processes — Part 2: Welding properties of shop primers
90.20 Standard under periodical review
Welding — Test for shop primers in relation to welding and allied processes — Part 3: Thermal cutting
90.20 Standard under periodical review
Welding — Test for shop primers in relation to welding and allied processes — Part 4: Emission of fumes and gases
90.20 Standard under periodical review
Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance spot welds
90.93 Standard confirmed
Resistance welding — Destructive tests of welds — Pressure test of resistance seam welds
90.93 Standard confirmed
Resistance welding — Welding current measurement for resistance welding — Part 1: Guidelines for measurement
90.93 Standard confirmed
Resistance welding — Welding current measurement for resistance welding — Part 2: Welding current meter with current sensing coil
90.93 Standard confirmed
Resistance welding — Welding current measurement for resistance welding — Part 3: Current sensing coil
90.93 Standard confirmed
Resistance welding — Welding current measurement for resistance welding — Part 4: Calibration system
90.93 Standard confirmed
Resistance welding — Welding current measurement for resistance welding — Part 5: Verification of welding current measuring system
90.93 Standard confirmed
Welding — Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts — Terminology
90.93 Standard confirmed
Welding — Multilingual terms for welded joints with illustrations
90.93 Standard confirmed
Welding — Welding of reinforcing steel — Part 1: Load-bearing welded joints
90.92 Standard to be revised
Welding — Welding of reinforcing steel — Part 2: Non load-bearing welded joints
90.92 Standard to be revised
Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities
90.92 Standard to be revised
Welding — Quality requirements for heat treatment in connection with welding and allied processes
60.60 Standard published
Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding
60.60 Standard published
Welding consumables — Covered electrodes for manual metal arc welding of copper and copper alloys — Classification
90.93 Standard confirmed
Welding and allied processes — Health and safety — Wordless precautionary labels for equipment and consumables used in arc welding and cutting
90.92 Standard to be revised
Welding for aerospace applications — Fusion welding of metallic components — Part 1: Process specification
60.60 Standard published
Welding for aerospace applications — Fusion welding of metallic components — Part 2: Acceptance criteria
60.60 Standard published
Welding consumables — Wire electrodes, wires and rods for welding of aluminium and aluminium alloys — Classification
90.93 Standard confirmed
Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification
60.60 Standard published
Welding consumables — Covered electrodes for manual metal arc welding of high-strength steels — Classification
90.93 Standard confirmed
Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification
90.92 Standard to be revised
Resistance welding — Weldability — Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials
60.60 Standard published
Resistance welding — Weldability — Part 2: Evaluation procedures for weldability in spot welding
90.93 Standard confirmed
Resistance welding — Weldability — Part 3: Evaluation procedures for weldability in spot weld bonding
90.93 Standard confirmed
Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-welded specimens
60.60 Standard published
Resistance spot-, projection- and seam-welding — Method for determining the transition resistance on aluminium and steel material
90.93 Standard confirmed
Resistance welding — Spot welding of aluminium and aluminium alloys — Weldability, welding and testing
60.60 Standard published
Friction stir spot welding — Aluminium — Part 2: Design of weld joints
90.60 Close of review
Friction stir spot welding — Aluminium — Part 3: Qualification of welding personnel
90.60 Close of review
Friction stir spot welding — Aluminium — Part 4: Specification and qualification of welding procedures
90.60 Close of review
Friction stir spot welding — Aluminium — Part 5: Quality and inspection requirements
90.60 Close of review
Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys — Classification
90.93 Standard confirmed
Welding for aerospace applications — Visual inspection of welds
90.92 Standard to be revised
Resistance welding — Locking tapers for electrode holders and electrode caps
90.93 Standard confirmed
Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 1: Requirements and test methods for protection against risks in foundries
90.60 Close of review
Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 1: Requirements and test methods for protection against risks in foundries — Amendment 1
60.60 Standard published
Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 2: Requirements and test methods for protection against risks in welding and allied processes
90.60 Close of review
Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 2: Requirements and test methods for protection against risks in welding and allied processes — Amendment 1
60.60 Standard published
Welding consumables — Rods for gas welding of non-alloy and creep-resisting steels — Classification
90.93 Standard confirmed
Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 1: General requirements
60.60 Standard published
Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 2: Requirements for testing and marking of separation efficiency
60.60 Standard published
Health and safety in welding and allied processes — Requirements, testing and marking of equipment for air filtration — Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices
90.93 Standard confirmed
Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 4: Determination of the minimum air volume flow rate of capture devices
60.60 Standard published
Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels — Classification
90.92 Standard to be revised
Acceptance tests for Nd:YAG laser beam welding machines — Machines with optical fibre delivery — Part 1: Laser assembly
90.93 Standard confirmed
Acceptance tests for Nd:YAG laser beam welding machines — Machines with optical fibre delivery — Part 2: Moving mechanism
90.93 Standard confirmed
Resistance welding equipment — Transformers — Integrated transformer-rectifier units for welding guns operating at 1 000 Hz
90.93 Standard confirmed
Railway infrastructure — Rail welding — Part 1: General requirements and test methods for rail welding
60.60 Standard published
Welding and allied processes — Process specification for laser-arc hybrid welding for metallic materials
60.60 Standard published
Welding consumables — Covered electrodes — Determination of the efficiency, metal recovery and deposition coefficient
90.93 Standard confirmed
Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys — Classification
60.60 Standard published
Welding consumables — Solid wires and rods for fusion welding of copper and copper alloys — Classification
90.93 Standard confirmed
Welding for aerospace applications — Qualification test for welders and welding operators — Fusion welding of metallic components
60.60 Standard published
Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels — Classification
90.20 Standard under periodical review
Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
90.93 Standard confirmed
Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) — Amendment 1
60.60 Standard published
Friction stir welding — Aluminium — Part 2: Design of weld joints
60.60 Standard published
Friction stir welding — Aluminium — Part 3: Qualification of welding operators
60.60 Standard published
Friction stir welding — Aluminium — Part 4: Specification and qualification of welding procedures
60.60 Standard published
Friction stir welding — Aluminium — Part 5: Quality and inspection requirements
60.60 Standard published
Welding and allied processes — Symbolic representation on drawings — Welded joints
90.20 Standard under periodical review
Welding consumables — Covered electrodes for manual metal arc welding of non-alloy and fine grain steels — Classification
60.60 Standard published
Welding and allied processes — Vocabulary — Part 2: Health and safety
60.60 Standard published
Health and safety in welding and allied processes — Transparent welding curtains, strips and screens for arc welding processes
60.60 Standard published
Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels — Classification
90.92 Standard to be revised
Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Classification
90.93 Standard confirmed
Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification
60.60 Standard published
Welding and allied processes — Determination of hydrogen content in arc weld metal
90.60 Close of review
Gas welding equipment — Rubber hoses for welding, cutting and allied processes
60.60 Standard published
Quality requirements for fusion welding of metallic materials — Part 1: Criteria for the selection of the appropriate level of quality requirements
60.60 Standard published
Quality requirements for fusion welding of metallic materials — Part 2: Comprehensive quality requirements
60.60 Standard published
Quality requirements for fusion welding of metallic materials — Part 3: Standard quality requirements
60.60 Standard published
Quality requirements for fusion welding of metallic materials — Part 4: Elementary quality requirements
60.60 Standard published
Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
60.60 Standard published
Quality requirements for fusion welding of metallic materials — Part 6: Guidelines on implementing the ISO 3834 series
60.60 Standard published
Welding, brazing, soldering and cutting — Nomenclature of processes and reference numbers
60.60 Standard published
Gas welding equipment — Pressure gauges used in welding, cutting and allied processes
90.20 Standard under periodical review
Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and tests
90.93 Standard confirmed
Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and tests — Amendment 1
60.60 Standard published
Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and tests — Amendment 2
60.60 Standard published
Gas welding equipment — Safety devices — Part 1: Devices incorporating a flame (flashback) arrestor
90.93 Standard confirmed
Gas welding equipment — Safety devices — Part 2: Devices not incorporating a flame (flashback) arrestor
90.93 Standard confirmed
Resistance welding — Materials for electrodes and ancillary equipment
90.93 Standard confirmed
Resistance welding equipment — Electrode adaptors, male taper 1:10 — Part 1: Conical fixing, taper 1:10
90.93 Standard confirmed
Resistance spot welding — Electrode adaptors, male taper 1:10 — Part 2: Parallel shank fixing for end-thrust electrodes
90.93 Standard confirmed
Welding and allied processes — Assemblies made with soft solders and brazing filler metals — Mechanical test methods
90.93 Standard confirmed
Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of product, dimensions, tolerances and markings
90.92 Standard to be revised
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
60.60 Standard published
Spot welding equipment — Taper plug gauges and taper ring gauges
90.93 Standard confirmed
Resistance welding equipment — Transformers — General specifications applicable to all transformers
90.93 Standard confirmed
Resistance welding equipment — Secondary connecting cables with terminals connected to water-cooled lugs — Dimensions and characteristics
90.93 Standard confirmed
Resistance spot welding — Electrode adaptors, female taper 1 : 10
90.93 Standard confirmed
Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
90.92 Standard to be revised
Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding
90.93 Standard confirmed
Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure
90.93 Standard confirmed
Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
90.93 Standard confirmed
Welding consumables — Deposition of a weld metal pad for chemical analysis
60.60 Standard published
Arc welding and cutting — Nonconsumable tungsten electrodes — Classification
90.93 Standard confirmed
Welding and allied processes — Welding positions
90.20 Standard under periodical review
Gas welding equipment — Quick-action couplings with shut-off valves for welding, cutting and allied processes
90.60 Close of review
Gas welding equipment — Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar)
90.93 Standard confirmed
Gas welding equipment — Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) — Amendment 1
60.60 Standard published
Chain slings assembled by methods other than welding — Grade T(8)
90.60 Close of review
Resistance welding — Embossed projection welding — Projections for resistance welding
60.60 Standard published
Resistance welding equipment — Water-cooled secondary connection cables
60.60 Standard published
Gas welding equipment — Specification for hose assemblies for equipment for welding, cutting and allied processes
90.92 Standard to be revised
Welding — Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
90.60 Close of review
Resistance spot welding — Electrode holders — Part 1: Taper fixing 1:10
90.93 Standard confirmed
Resistance spot welding — Electrode holders — Part 2: Morse taper fixing
90.93 Standard confirmed
Resistance spot welding — Electrode holders — Part 3: Parallel shank fixing for end thrust
90.93 Standard confirmed
Welding and allied processes — Vocabulary — Part 2: Soldering and brazing processes and related terms
90.93 Standard confirmed
Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests
60.60 Standard published
Gas tightness of equipment for gas welding and allied processes
60.60 Standard published
Resistance welding equipment — Insulated pins for use in electrode back-ups
90.93 Standard confirmed
Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes
90.93 Standard confirmed
Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes — Amendment 1
60.60 Standard published
Qualification testing of welders — Fusion welding — Part 1: Steels
90.92 Standard to be revised
Qualification testing of welders — Fusion welding — Part 1: Steels — Technical Corrigendum 1
60.60 Standard published
Qualification testing of welders — Fusion welding — Part 1: Steels — Technical Corrigendum 2
60.60 Standard published
Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
90.92 Standard to be revised
Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys
90.92 Standard to be revised
Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys
90.92 Standard to be revised
Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys
90.92 Standard to be revised
Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
90.93 Standard confirmed
Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels
60.60 Standard published
Welding and allied processes — Types of joint preparation — Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
90.93 Standard confirmed
Welding and allied processes — Recommendations for joint preparation — Part 4: Clad steels
90.93 Standard confirmed
Health and safety in welding and allied processes — Arc welding fume components
90.93 Standard confirmed
Welding consumables — Hardfacing classification — Microstructures
90.93 Standard confirmed
Welding — Guidelines for a metallic materials grouping system
60.60 Standard published
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests
90.93 Standard confirmed
Welding — Recommendations for welding of metallic materials — Part 1: General guidance for arc welding
90.93 Standard confirmed
Welding — Recommendations for welding of metallic materials — Part 2: Arc welding of ferritic steels
90.93 Standard confirmed
Welding — Recommendations for welding of metallic materials — Part 3: Arc welding of stainless steels
90.93 Standard confirmed
Welding — Recommendations for welding of metallic materials — Part 4: Arc welding of aluminium and aluminium alloys
90.93 Standard confirmed
Welding — Recommendations for welding of metallic materials — Part 5: Welding of clad steels
90.93 Standard confirmed
Welding — Recommendations for welding of metallic materials — Part 6: Laser beam welding
90.93 Standard confirmed
Welding — Recommendations for welding of metallic materials — Part 7: Electron beam welding
90.93 Standard confirmed
Welding — Comparison of standardised methods for the avoidance of cold cracks
90.93 Standard confirmed
Welding and allied processes — Guidelines for measurement of welding energies
90.93 Standard confirmed
Health and safety in welding — Guidelines for risk assessment of welding fabrication activities
90.93 Standard confirmed
Welding — Grouping systems for materials — European materials
60.60 Standard published
Welding — Grouping systems for materials — American materials
90.92 Standard to be revised
Welding — Grouping systems for materials — Japanese materials
60.60 Standard published
Welding consumables — International Institute of Welding (IIW) position statement on the use of trace element analyses in welding consumable specifications
60.60 Standard published
Welding consumables — Predicted and measured FN in specifications — A position statement of the experts of IIW Commission IX
90.92 Standard to be revised
Resistance welding — Overview of standards for resistance welding
60.60 Standard published
Welding and allied processes — Vocabulary — Part 1: General terms
90.93 Standard confirmed
Welding and allied processes — Vocabulary — Part 3: Welding processes
90.93 Standard confirmed
Welding and allied processes — Vocabulary — Part 4: Arc welding
90.93 Standard confirmed
Gas welding equipment — Hose connections for equipment for welding, cutting and allied processes — Listing of connections which are either standardised or in common use
60.60 Standard published
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding
90.93 Standard confirmed
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding — Technical Corrigendum 1
60.60 Standard published
Numerical welding simulation — Execution and documentation
90.92 Standard to be revised