UPDATED as of December 2021 / 2021-12
DISCLAIMER: This is an informative page, providing added value information on standards. Information may evolve and change subject to the publication of other legislative texts. Genorma.com informs its users that users are responsible for deciding the version of the standard that is applicable to their products, and not Genorma.com. As a consequence, Genorma.com users are encouraged to check the latest versions of the legal text accessible through the EUR-LEX website
The Harmonised standards listed below, supporting the implementation of the Essential Requirements established by the Pressure Equipment Directive provide presumption of conformity to products complying with such standards.
The European and international standards listed in this page are cited in the following implementing acts:
Commission Implementing Decision (EU) 2019/1616 of 27 September 2019 on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council - OJ L 250, 30 September 2019, p. 95–99
Commission communication in the framework of the implementation of Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment (recast) - OJ C 326 of 14 September 2018
Please also check the list of standards under development in CEN and CENELEC in support of the Pressure Equipment Directive: https://genorma.com/en/project/search-by-directive-in-development/25719849
For more information on the Pressure equipment directive, click on the link: https://genorma.com/en/directive/show/2014/68/EU
Click below on the code of each standard to obtain additional information and/or obtain the standard in a very easy and convenient way
EN 10213:2007+A1:2016 | Title: Steel castings for pressure purposes | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 10216-1:2013 | Title: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 10216-2:2013 | Title: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10216-3:2013 | Title: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 10216-4:2013 | Title: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 10216-5:2013 | Title: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10028-1:2007+A1:2009/AC:2009 | Title: Flat products made of steels for pressure purposes - Part 1: General requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 09/02/2018 | OJ reference for withdrawal from OJ (7): OJ C 049 - 09/02/2018 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10028-1:2007+A1:2009 | Title: Flat products made of steels for pressure purposes - Part 1: General requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 09/02/2018 | OJ reference for withdrawal from OJ (7): OJ C 049 - 09/02/2018 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10028-1:2017 | Title: Flat products made of steels for pressure purposes - Part 1: General requirements | Date of start of presumption of conformity (1) : 09/02/2018 | OJ reference for publication in OJ (2): OJ C 049 - 09/02/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10028-2:2009 | Title: Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 09/02/2018 | OJ reference for withdrawal from OJ (7): OJ C 049 - 09/02/2018 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10028-2:2017 | Title: Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties | Date of start of presumption of conformity (1) : 09/02/2018 | OJ reference for publication in OJ (2): OJ C 049 - 09/02/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10028-3:2009 | Title: Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 09/02/2018 | OJ reference for withdrawal from OJ (7): OJ C 049 - 09/02/2018 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10028-3:2017 | Title: Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized | Date of start of presumption of conformity (1) : 09/02/2018 | OJ reference for publication in OJ (2): OJ C 049 - 09/02/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10028-4:2009 | Title: Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 09/02/2018 | OJ reference for withdrawal from OJ (7): OJ C 049 - 09/02/2018 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10028-4:2017 | Title: Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties | Date of start of presumption of conformity (1) : 09/02/2018 | OJ reference for publication in OJ (2): OJ C 049 - 09/02/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10028-5:2009 | Title: Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 09/02/2018 | OJ reference for withdrawal from OJ (7): OJ C 049 - 09/02/2018 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10028-5:2017 | Title: Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled | Date of start of presumption of conformity (1) : 09/02/2018 | OJ reference for publication in OJ (2): OJ C 049 - 09/02/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10028-6:2009 | Title: Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 09/02/2018 | OJ reference for withdrawal from OJ (7): OJ C 049 - 09/02/2018 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10028-6:2017 | Title: Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered | Date of start of presumption of conformity (1) : 09/02/2018 | OJ reference for publication in OJ (2): OJ C 049 - 09/02/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10028-7:2007 | Title: Flat products made of steels for pressure purposes - Part 7: Stainless steels | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10028-7:2016 | Title: Flat products made of steels for pressure purposes - Part 7: Stainless steels | Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 10204:2004 | Title: Metallic products - Types of inspection documents | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 10216-5:2021 | Title: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10217-1:2002/A1:2005 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2021 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-1:2002 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2021 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-1:2019 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10217-2:2002/A1:2005 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2021 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-2:2002 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2021 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-2:2019 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10217-3:2002/A1:2005 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2021 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-3:2002 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2021 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-3:2019 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10217-4:2002/A1:2005 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2021 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-4:2002 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2021 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-4:2019 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10217-5:2002/A1:2005 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2021 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-5:2002 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2021 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-5:2019 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10217-6:2002/A1:2005 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2021 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-6:2002 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2021 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-6:2019 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10217-7:2014 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10217-7:2021 | Title: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10222-1:1998/A1:2002 | Title: Steel forgings for pressure purposes - Part 1: General requirements for open die forgings | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10222-1:1998 | Title: Steel forgings for pressure purposes - Part 1: General requirements for open die forgings | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10222-1:2017 | Title: Steel forgings for pressure purposes - Part 1: General requirements for open die forgings | Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10222-2:1999/AC:2000 | Title: Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10222-2:1999 | Title: Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10222-2:2017 | Title: Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties | Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10222-2:2017+A1:2021 | Title: Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10222-3:1998 | Title: Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10222-3:2017 | Title: Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties | Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10222-4:1998/A1:2001 | Title: Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10222-4:1998 | Title: Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10222-4:2017 | Title: Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength | Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10222-4:2017+A1:2021 | Title: Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10222-5:1999/AC:2000 | Title: Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10222-5:1999 | Title: Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10222-5:2017 | Title: Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels | Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10253-2:2007 | Title: Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10253-4:2008/AC:2009 | Title: Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10253-4:2008 | Title: Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 10269:2013 | Title: Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 10272:2007 | Title: Stainless steel bars for pressure purposes | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10272:2016 | Title: Stainless steel bars for pressure purposes | Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 10273:2007 | Title: Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 10273:2016 | Title: Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties | Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 10305-4:2016 | Title: Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 10305-6:2016 | Title: Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 1057:2006+A1:2010 | Title: Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 1092-1:2007+A1:2013 | Title: Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 31/10/2018 | OJ reference for withdrawal from OJ (7): OJ C 326 - 14/09/2018 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 1092-1:2018 | Title: Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges | Date of start of presumption of conformity (1) : 14/09/2018 | OJ reference for publication in OJ (2): OJ C 326 - 14/09/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 1092-3:2003/AC:2007 | Title: Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 1092-3:2003 | Title: Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 1092-4:2002 | Title: Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 1171:2015 | Title: Industrial valves - Cast iron gate valves | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 12178:2003 | Title: Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12178:2016 | Title: Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking | Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 12263:1998 | Title: Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 12266-1:2012 | Title: Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 12284:2003 | Title: Refrigerating systems and heat pumps - Valves - Requirements, testing and marking | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12288:2010 | Title: Industrial valves - Copper alloy gate valves | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 12392:2016 | Title: Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 12420:2014 | Title: Copper and copper alloys - Forgings | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 12434:2000/AC:2001 | Title: Cryogenic vessels - Cryogenic flexible hoses | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12434:2000 | Title: Cryogenic vessels - Cryogenic flexible hoses | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12451:2012 | Title: Copper and copper alloys - Seamless, round tubes for heat exchangers | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 12452:2012 | Title: Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 12516-1:2014 | Title: Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/03/2020 | OJ reference for withdrawal from OJ (7): OJ L 250 - 30/09/2019 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12516-2:2014 | Title: Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12516-3:2002/AC:2003 | Title: Valves - Shell design strength - Part 3: Experimental method | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 12516-3:2002 | Title: Valves - Shell design strength - Part 3: Experimental method | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 12516-4:2014 | Title: Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/03/2020 | OJ reference for withdrawal from OJ (7): OJ L 250 - 30/09/2019 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 1252-1:1998/AC:1998 | Title: Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 1252-1:1998 | Title: Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 1252-2:2001 | Title: Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80°C and -20°C | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/03/2020 | OJ reference for withdrawal from OJ (7): OJ L 250 - 30/09/2019 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12542:2010 | Title: LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12542:2020 | Title: LPG equipment and accessories - Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 12735-1:2016 | Title: Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12735-1:2020 | Title: Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 12735-2:2016 | Title: Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 12778:2002/A1:2005 | Title: Cookware - Pressure cookers for domestic use | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 12778:2002/AC:2003 | Title: Cookware - Pressure cookers for domestic use | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 12778:2002 | Title: Cookware - Pressure cookers for domestic use | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 12952-1:2015 | Title: Water-tube boilers and auxiliary installations - Part 1: General | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 12952-10:2002 | Title: Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12952-11:2007 | Title: Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 12952-14:2004 | Title: Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 12952-16:2002 | Title: Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 12952-18:2012 | Title: Water-tube boilers and auxiliary installations - Part 18: Operating instructions | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 12952-2:2011 | Title: Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12952-3:2011 | Title: Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 12952-5:2011 | Title: Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12952-6:2011 | Title: Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12952-7:2012 | Title: Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 12952-8:2002 | Title: Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 12952-9:2002 | Title: Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 12953-1:2012 | Title: Shell boilers - Part 1: General | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 12953-12:2003 | Title: Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 12953-13:2012 | Title: Shell boilers - Part 13: Operating instructions | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 12953-2:2012 | Title: Shell boilers - Part 2: Materials for pressure parts of boilers and accessories | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 12953-3:2016 | Title: Shell boilers - Part 3: Design and calculation for pressure parts | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 12953-4:2002 | Title: Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 14/09/2018 | OJ reference for withdrawal from OJ (7): OJ C 326 - 14/09/2018 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12953-4:2018 | Title: Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler | Date of start of presumption of conformity (1) : 14/09/2018 | OJ reference for publication in OJ (2): OJ C 326 - 14/09/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 12953-5:2002 | Title: Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 12953-5:2020 | Title: Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 12953-6:2011 | Title: Shell Boilers - Part 6: Requirements for equipment for the boiler | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 12953-7:2002 | Title: Shell boilers - Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 12953-8:2001/AC:2002 | Title: Shell boilers - Part 8: Requirements for safeguards against excessive pressure | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 12953-8:2001 | Title: Shell boilers - Part 8: Requirements for safeguards against excessive pressure | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 12953-9:2007 | Title: Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 13121-1:2003 | Title: GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13121-2:2003 | Title: GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 13121-3:2016 | Title: GRP tanks and vessels for use above ground - Part 3: Design and workmanship | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13134:2000 | Title: Brazing - Procedure approval | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 13136:2013 | Title: Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 13136:2013+A1:2018 | Title: Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13175:2014 | Title: LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13175:2019 | Title: LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13175:2019+A1:2020 | Title: LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13348:2016 | Title: Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 13371:2001 | Title: Cryogenic vessels - Couplings for cryogenic service | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 13397:2001 | Title: Industrial valves - Diaphragm valves made of metallic materials | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 13445-1:2014/A1:2014 | Title: Unfired pressure vessels - Part 1: General | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-1:2014 | Title: Unfired pressure vessels - Part 1: General | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-1:2021 | Title: Unfired pressure vessels - Part 1: General | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13445-10:2021 | Title: Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13445-2:2014/A1:2016 | Title: Unfired pressure vessels - Part 2: Materials | Date of start of presumption of conformity (1) : 14/09/2018 | OJ reference for publication in OJ (2): OJ C 326 - 14/09/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/09/2019 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-2:2014/A2:2018 | Title: Unfired pressure vessels - Part 2: Materials | Date of start of presumption of conformity (1) : 14/09/2018 | OJ reference for publication in OJ (2): OJ C 326 - 14/09/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/09/2019 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-2:2014/A3:2018 | Title: Unfired pressure vessels - Part 2: Materials | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-2:2014 | Title: Unfired pressure vessels - Part 2: Materials | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-2:2021 | Title: Unfired pressure vessels - Part 2: Materials | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13445-3:2014/A1:2015 | Title: Unfired pressure vessels - Part 3: Design | Date of start of presumption of conformity (1) : 14/09/2018 | OJ reference for publication in OJ (2): OJ C 326 - 14/09/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/09/2019 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-3:2014/A2:2016 | Title: Unfired pressure vessels - Part 3: Design | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-3:2014/A3:2017 | Title: Unfired pressure vessels - Part 3: Design | Date of start of presumption of conformity (1) : 14/09/2018 | OJ reference for publication in OJ (2): OJ C 326 - 14/09/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/09/2019 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-3:2014/A4:2018 | Title: Unfired pressure vessels - Part 3: Design | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-3:2014/A5:2018 | Title: Unfired pressure vessels - Part 3: Design | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-3:2014/A6:2019 | Title: Unfired pressure vessels - Part 3: Design | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-3:2014/A7:2019 | Title: Unfired pressure vessels - Part 3: Design | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-3:2014/A8:2019 | Title: Unfired pressure vessels - Part 3: Design | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-3:2014 | Title: Unfired pressure vessels - Part 3: Design | Date of start of presumption of conformity (1) : 14/09/2018 | OJ reference for publication in OJ (2): OJ C 326 - 14/09/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/09/2019 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-3:2021 | Title: Unfired pressure vessels - Part 3: Design | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13445-4:2014 | Title: Unfired pressure vessels - Part 4: Fabrication | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-4:2021 | Title: Unfired pressure vessels - Part 4: Fabrication | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13445-5:2014/A1:2018 | Title: Unfired pressure vessels - Part 5: Inspection and testing | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-5:2014 | Title: Unfired pressure vessels - Part 5: Inspection and testing | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-5:2021 | Title: Unfired pressure vessels - Part 5: Inspection and testing | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13445-6:2014/A2:2018 | Title: Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-6:2014 | Title: Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/09/2019 | OJ reference for withdrawal from OJ (7): OJ L 250 - 30/09/2019 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-6:2021 | Title: Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13445-8:2014/A1:2014 | Title: Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-8:2014 | Title: Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/06/2023 | OJ reference for withdrawal from OJ (7): OJ L 457 - 21/12/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13445-8:2021 | Title: Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13458-1:2002 | Title: Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 13458-2:2002/AC:2006 | Title: Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13458-2:2002 | Title: Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 13480-1:2012 | Title: Metallic industrial piping - Part 1: General | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 15/12/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-1:2017/A1:2019 | Title: Metallic industrial piping - Part 1: General | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-1:2017 | Title: Metallic industrial piping - Part 1: General | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-2:2012/A1:2013 | Title: Metallic industrial piping - Part 2: Materials | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 15/12/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-2:2012 | Title: Metallic industrial piping - Part 2: Materials | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 15/12/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-2:2017/A1:2018 | Title: Metallic industrial piping - Part 2: Materials | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/02/2021 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-2:2017/A2:2018 | Title: Metallic industrial piping - Part 2: Materials | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/02/2021 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-2:2017/A3:2018 | Title: Metallic industrial piping - Part 2: Materials | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-2:2017/A7:2020 | Title: Metallic industrial piping - Part 2: Materials | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-2:2017 | Title: Metallic industrial piping - Part 2: Materials | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/02/2021 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-3:2012 | Title: Metallic industrial piping - Part 3: Design and calculation | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 15/12/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-3:2017/A1:2021 | Title: Metallic industrial piping - Part 3: Design and calculation | Date of start of presumption of conformity (1) : 12/10/2021 | OJ reference for publication in OJ (2): OJ L 361 - 12/10/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-3:2017/A2:2020 | Title: Metallic industrial piping - Part 3: Design and calculation | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/10/2021 | OJ reference for withdrawal from OJ (7): OJ L 361 - 12/10/2021 | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-3:2017/A3:2020 | Title: Metallic industrial piping - Part 3: Design and calculation | Date of start of presumption of conformity (1) : 12/10/2021 | OJ reference for publication in OJ (2): OJ L 361 - 12/10/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-3:2017 | Title: Metallic industrial piping - Part 3: Design and calculation | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/10/2021 | OJ reference for withdrawal from OJ (7): OJ L 361 - 12/10/2021 | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-4:2012/A1:2013 | Title: Metallic industrial piping - Part 4: Fabrication and installation | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-4:2012/A2:2015 | Title: Metallic industrial piping - Part 4: Fabrication and installation | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-4:2012 | Title: Metallic industrial piping - Part 4: Fabrication and installation | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-5:2012/A1:2013 | Title: Metallic industrial piping - Part 5: Inspection and testing | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 15/12/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-5:2012 | Title: Metallic industrial piping - Part 5: Inspection and testing | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 15/12/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-5:2017/A1:2019 | Title: Metallic industrial piping - Part 5: Inspection and testing | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-5:2017 | Title: Metallic industrial piping - Part 5: Inspection and testing | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-6:2012 | Title: Metallic industrial piping - Part 6: Additional requirements for buried piping | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 15/12/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-6:2017/A1:2019 | Title: Metallic industrial piping - Part 6: Additional requirements for buried piping | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-6:2017 | Title: Metallic industrial piping - Part 6: Additional requirements for buried piping | Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2020 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 60.60 - Standard published
EN 13480-8:2012/A1:2014 | Title: Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/08/2016 | OJ reference for withdrawal from OJ (7): OJ C 293 - 12/08/2016 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-8:2012/A2:2015 | Title: Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 15/12/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-8:2012 | Title: Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/08/2016 | OJ reference for withdrawal from OJ (7): OJ C 293 - 12/08/2016 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 13480-8:2017 | Title: Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping | Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 1349:2009 | Title: Industrial process control valves | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 13547:2013 | Title: Industrial valves - Copper alloy ball valves | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 13648-1:2008 | Title: Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 13648-2:2002 | Title: Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 13709:2010 | Title: Industrial valves - Steel globe and globe stop and check valves | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 13789:2010 | Title: Industrial valves - Cast iron globe valves | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 13831:2007 | Title: Closed expansion vessels with built in diaphragm for installation in water | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 13923:2005 | Title: Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 14129:2014 | Title: LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 14197-1:2003 | Title: Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 14197-2:2003/A1:2006 | Title: Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 14197-2:2003/AC:2006 | Title: Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 14197-2:2003 | Title: Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 14197-3:2004/A1:2005 | Title: Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 14197-3:2004/AC:2004 | Title: Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 14197-3:2004 | Title: Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 14222:2003 | Title: Stainless steel shell boilers | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/04/2023 | OJ reference for withdrawal from OJ (7): OJ L 361 - 12/10/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 14222:2021 | Title: Stainless steel steam boilers | Date of start of presumption of conformity (1) : 12/10/2021 | OJ reference for publication in OJ (2): OJ L 361 - 12/10/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 14276-1:2006+A1:2011 | Title: Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 14276-1:2020 | Title: Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 14276-2:2007+A1:2011 | Title: Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 14276-2:2020 | Title: Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 14359:2006+A1:2010 | Title: Gas-loaded accumulators for fluid power applications | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 14382:2005+A1:2009/AC:2009 | Title: Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 14382:2005+A1:2009 | Title: Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 14394:2005+A1:2008 | Title: Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 14570:2014 | Title: LPG equipment and accessories - Equipping of overground and underground LPG vessels | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 14585-1:2006 | Title: Corrugated metal hose assemblies for pressure applications - Part 1: Requirements | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 14917:2009+A1:2012 | Title: Metal bellows expansion joints for pressure applications | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 15001-1:2009 | **Title: Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for desi Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 1515-4:2009 | Title: Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/04/2023 | OJ reference for withdrawal from OJ (7): OJ L 361 - 12/10/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 1515-4:2021 | Title: Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU | Date of start of presumption of conformity (1) : 12/10/2021 | OJ reference for publication in OJ (2): OJ L 361 - 12/10/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 1562:2012 | Title: Founding - Malleable cast irons | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/09/2019 | OJ reference for withdrawal from OJ (7): OJ L 250 - 30/09/2019 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 1562:2019 | Title: Founding - Malleable cast irons | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 1563:2011 | Title: Founding - Spheroidal graphite cast irons | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/03/2020 | OJ reference for withdrawal from OJ (7): OJ L 250 - 30/09/2019 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 1563:2018 | Title: Founding - Spheroidal graphite cast irons | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 15776:2011+A1:2015 | Title: Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 1591-1:2013 | Title: Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 1626:2008 | Title: Cryogenic vessels - Valves for cryogenic service | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 1653:1997/A1:2000 | Title: Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 1653:1997 | Title: Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 16668:2016 | Title: Industrial valves - Requirements and testing for metallic valves as pressure accessories | Date of start of presumption of conformity (1) : 14/09/2018 | OJ reference for publication in OJ (2): OJ C 326 - 14/09/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 16767:2016 | Title: Industrial valves - Steel and cast iron check valves | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 16767:2020 | Title: Industrial valves - Metallic check valves | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 17278:2021 | Title: Natural gas vehicles - Vehicle fuelling appliances | Date of start of presumption of conformity (1) : 21/12/2021 | OJ reference for publication in OJ (2): OJ L 457 - 21/12/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 1759-3:2003/AC:2004 | Title: Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 1759-3:2003 | Title: Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 1759-4:2003 | Title: Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.92 - Standard to be revised
EN 1797:2001 | Title: Cryogenic vessels - Gas/material compatibility | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 1866-2:2014 | Title: Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1 Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 1866-3:2013 | Title: Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1 | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 19:2016 | Title: Industrial valves - Marking of metallic valves | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 1983:2013 | Title: Industrial valves - Steel ball valves | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 1984:2010 | Title: Industrial valves - Steel gate valves | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN 267:2009+A1:2011 | Title: Automatic forced draught burners for liquid fuels | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 334:2005+A1:2009 | Title: Gas pressure regulators for inlet pressures up to 100 bar | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 378-2:2008+A2:2012 | Title: Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 17/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 389 - 17/11/2017 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 3-8:2006/AC:2007 | Title: Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 3-8:2006 | Title: Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 593:2009+A1:2011 | Title: Industrial valves - Metallic butterfly valves | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 14/09/2018 | OJ reference for withdrawal from OJ (7): OJ C 326 - 14/09/2018 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 593:2017 | Title: Industrial valves - Metallic butterfly valves for general purposes | Date of start of presumption of conformity (1) : 14/09/2018 | OJ reference for publication in OJ (2): OJ C 326 - 14/09/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 676:2003+A2:2008/AC:2008 | Title: Automatic forced draught burners for gaseous fuels | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 676:2003+A2:2008 | Title: Automatic forced draught burners for gaseous fuels | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN 764-4:2014 | Title: Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 764-5:2014 | Title: Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.60 - Close of review
EN 764-7:2002/AC:2006 | Title: Pressure equipment - Part 7: Safety systems for unfired pressure equipment | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN 764-7:2002 | Title: Pressure equipment - Part 7: Safety systems for unfired pressure equipment | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 10931:2005/A1:2015 | Title: Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 10931:2005 | Title: Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 13585:2012 | Title: Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 15493:2003/A1:2017 | **Title: Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (I Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 15493:2003 | **Title: Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (I Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 15494:2018 | **Title: Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 15613:2004 | Title: Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 15614-1:2004/A1:2008 | Title: Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN ISO 15614-1:2004/A2:2012 | Title: Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN ISO 15614-1:2004 | Title: Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN ISO 15614-11:2002 | Title: Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 15614-2:2005/AC:2009 | Title: Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 15614-2:2005 | Title: Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 15614-4:2005/AC:2007 | Title: Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 15614-4:2005 | Title: Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 15614-5:2004 | Title: Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 15614-6:2006 | Title: Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 15614-7:2007 | Title: Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2007) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN ISO 15614-8:2016 | Title: Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016) | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 15620:2000 | Title: Welding - Friction welding of metallic materials (ISO 15620:2000) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN ISO 15620:2019 | Title: Welding - Friction welding of metallic materials (ISO 15620:2019) | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 16135:2006/A1:2019 | Title: Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 16135:2006 | Title: Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 16136:2006/A1:2019 | Title: Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 16136:2006 | Title: Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 16137:2006/A1:2019 | Title: Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 16137:2006 | Title: Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 16138:2006/A1:2019 | Title: Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 16138:2006 | Title: Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 16139:2006/A1:2019 | Title: Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 16139:2006 | Title: Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 21009-2:2015 | Title: Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements (ISO 21009-2:2015) | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 21013-3:2016 | Title: Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016) | Date of start of presumption of conformity (1) : 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 21028-1:2016 | Title: Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016) | Date of start of presumption of conformity (1) : 17/11/2017 | OJ reference for publication in OJ (2): OJ C 389 - 17/11/2017 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 21028-2:2018 | Title: Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018) | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 21787:2006/A1:2019 | Title: Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 21787:2006 | Title: Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 4126-1:2013/A2:2019 | Title: Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013) | Date of start of presumption of conformity (1) : 20/04/2020 | OJ reference for publication in OJ (2): OJ L 121 - 20/04/2020 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 4126-1:2013 | Title: Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 20/04/2020 | OJ reference for withdrawal from OJ (7): OJ L 121 - 20/04/2020 | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 4126-2:2019 | Title: Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2018) | Date of start of presumption of conformity (1) : 30/09/2019 | OJ reference for publication in OJ (2): OJ L 250 - 30/09/2019 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 4126-3:2006 | Title: Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 10/08/2022 | OJ reference for withdrawal from OJ (7): OJ L 046 - 10/02/2021 | Standardisation stage - no legal status - 99.60 - Withdrawal effective
EN ISO 4126-3:2020 | Title: Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020) | Date of start of presumption of conformity (1) : 10/02/2021 | OJ reference for publication in OJ (2): OJ L 046 - 10/02/2021 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 4126-4:2013 | Title: Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves (ISO 4126-4:2013) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 4126-5:2013 | Title: Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 4126-7:2013 | Title: Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2013) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 9606-1:2017 | Title: Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) | Date of start of presumption of conformity (1) : 09/02/2018 | OJ reference for publication in OJ (2): OJ C 049 - 09/02/2018 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 60.60 - Standard published
EN ISO 9606-2:2004 | Title: Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 9606-3:1999 | Title: Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 9606-4:1999 | Title: Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 9606-5:2000 | Title: Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 90.93 - Standard confirmed
EN ISO 9712:2012 | Title: Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) | Date of start of presumption of conformity (1) : 19/07/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction (3): - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): - | Standardisation stage - no legal status - 99.60 - Withdrawal effective
