Summary of references of Harmonised Standards supporting the ATEX Directive 2014/34/EU relating to equipment and protective systems intended for use in potentially explosive atmospheres

UPDATED AS OF 2022-05-20 - 20 May 2022

This web page provides you with updated information on the European standard supporting the implementation of EU Directives and Regulations. It provides, on one hand the information corresponding to the real-time status of the standards provided by CEN and CENELEC and, on the other hand, provides updated information about the status of the standards in support of the European legislation. It may happen that a standard is withdrawn by the standardisation body and remains applicable in the context of the EU legislation, unless the reference is withdrawn from the official journal.

You can check in an easy way the status of the harmonised standards under the ATEX Directive by following the link: https://genorma.com/en/directive/show/2014/34/EU

"DISCLAIMER: This is an informative page, providing added value information on standards. Information may evolve and change subject to the publication of other legislative texts. This page has no legal validity and only informative value. Genorma.com informs its users that users of this platform are responsible for deciding the version of the standard that is applicable to their products, and not Genorma.com. As a consequence, Genorma.com users are encouraged to check the latest versions of the legal text accessible through the EUR-LEX website or the Website of the European Commission"

According to Article 12 (Presumption of conformity of products) of Directive 2014/34/EU on ATEX, products which are in conformity with harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union shall be presumed to be in conformity with the essential health and safety requirements set out in Annex II of the Directive ATEX covered by those standards or parts thereof.

The following harmonised standards have been cited in the Official Journal in support of the ATEX Directive:

EN 1010-1:2004+A1:2010 | Title of the standard (D): Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 1010-2:2006+A1:2010 | Title of the standard (D): Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 1127-1:2011 | Title of the standard (D): Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 01/02/2022 | OJ reference for withdrawal from OJ (7): OJ L 054 - 26/02/2020

EN 1127-1:2019 | Title of the standard (D): Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology | 60.60 Standard published | | Date of start of presumption of conformity (1): 26/02/2020 | OJ reference for publication in OJ (2): OJ L 054 - 26/02/2020 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 1127-2:2014 | Title of the standard (D): Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 12581:2005+A1:2010 | Title of the standard (D): Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements | 90.60 Close of review | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 12621:2006+A1:2010 | Title of the standard (D): Machinery for the supply and circulation of coating materials under pressure - Safety requirements | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 12757-1:2005+A1:2010 | Title of the standard (D): Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing | 90.60 Close of review | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 13012:2012 | Title of the standard (D): Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 03/09/2023 | OJ reference for withdrawal from OJ (7): OJ L 083 - 10/03/2022

EN 13012:2021 | Title of the standard (D): Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers | 60.60 Standard published | | Date of start of presumption of conformity (1): 10/03/2022 | OJ reference for publication in OJ (2): OJ L 083 - 10/03/2022 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 13160-1:2003 | Title of the standard (D): Leak detection systems - Part 1: General principles | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/10/2018 | OJ reference for withdrawal from OJ (7): OJ C 371 - 12/10/2018

EN 13237:2012 | Title of the standard (D): Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres | 90.92 Standard to be revised | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 13463-1:2009 | Title of the standard (D): Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 31/10/2019 | OJ reference for withdrawal from OJ (7): OJ C 293 - 12/08/2016

EN 13463-2:2004 | Title of the standard (D): Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/10/2018 | OJ reference for withdrawal from OJ (7): OJ C 371 - 12/10/2018

EN 13463-3:2005 | Title of the standard (D): Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/10/2018 | OJ reference for withdrawal from OJ (7): OJ C 371 - 12/10/2018

EN 13463-5:2011 | Title of the standard (D): Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 31/10/2019 | OJ reference for withdrawal from OJ (7): OJ C 293 - 12/08/2016

EN 13463-6:2005 | Title of the standard (D): Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 31/10/2019 | OJ reference for withdrawal from OJ (7): OJ C 293 - 12/08/2016

EN 13463-8:2003 | Title of the standard (D): Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 31/10/2019 | OJ reference for withdrawal from OJ (7): OJ C 293 - 12/08/2016

EN 13616:2004/AC:2006 | Title of the standard (D): Overfill prevention devices for static tanks for liquid petroleum fuels | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 11/07/2017 | OJ reference for withdrawal from OJ (7): OJ C 293 - 12/08/2016

EN 13616:2004 | Title of the standard (D): Overfill prevention devices for static tanks for liquid petroleum fuels | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 11/07/2017 | OJ reference for withdrawal from OJ (7): OJ C 293 - 12/08/2016

EN 13616-1:2016 | Title of the standard (D): Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device | 90.60 Close of review | | Date of start of presumption of conformity (1): 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 13617-1:2012 | Title of the standard (D): Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 03/09/2023 | OJ reference for withdrawal from OJ (7): OJ L 083 - 10/03/2022

EN 13617-1:2021 | Title of the standard (D): Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units | 60.60 Standard published | | Date of start of presumption of conformity (1): 10/03/2022 | OJ reference for publication in OJ (2): OJ L 083 - 10/03/2022 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 13617-2:2012 | Title of the standard (D): Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 03/09/2023 | OJ reference for withdrawal from OJ (7): OJ L 083 - 10/03/2022

EN 13617-2:2021 | Title of the standard (D): Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers | 60.60 Standard published | | Date of start of presumption of conformity (1): 10/03/2022 | OJ reference for publication in OJ (2): OJ L 083 - 10/03/2022 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 13617-3:2012 | Title of the standard (D): Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 03/09/2023 | OJ reference for withdrawal from OJ (7): OJ L 083 - 10/03/2022

EN 13617-3:2021 | Title of the standard (D): Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves | 60.60 Standard published | | Date of start of presumption of conformity (1): 10/03/2022 | OJ reference for publication in OJ (2): OJ L 083 - 10/03/2022 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 13617-4:2012 | Title of the standard (D): Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 03/09/2023 | OJ reference for withdrawal from OJ (7): OJ L 083 - 10/03/2022

EN 13617-4:2021 | Title of the standard (D): Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers | 60.60 Standard published | | Date of start of presumption of conformity (1): 10/03/2022 | OJ reference for publication in OJ (2): OJ L 083 - 10/03/2022 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 13760:2021 | Title of the standard (D): LPG equipment and accessories – Automotive LPG filling system for light and heavy duty vehicles – Nozzle, test requirements and dimensions | 60.60 Standard published | | Date of start of presumption of conformity (1): 21/05/2022 | OJ reference for publication in OJ (2): OJ L 140, 19/05/2022 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 13760:2003 | Title of the standard (D): Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 19/11/2023 | OJ reference for withdrawal from OJ (7): OJ L 140, 19/5/2022

EN 13821:2002 | Title of the standard (D): Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/09/2018 | OJ reference for withdrawal from OJ (7): OJ C 092 - 09/03/2018

EN 13852-1:2013 | Title of the standard (D): Cranes - Offshore cranes - Part 1: General-purpose offshore cranes | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 13852-3:2021 | Title of the standard (D): Cranes - Offshore cranes - Part 3: Light offshore cranes | 60.60 Standard published | | Date of start of presumption of conformity (1): | OJ reference for publication in OJ (2): - " | Restriction: Notice 1: The normative references referred to in clause 2 of harmonised standard EN IEC 60079-0:2018 shall be read as EN IEC 60079-0:2018 corrected by EN IEC 60079-0:2018/AC:2020-02

Notice 2: The normative references referred to in claus" | Date of start of presumption of conformity with restriction (4): 26/08/2021 | OJ reference for publication of a restriction in OJ (5): OJ L 302 - 26/08/2021 | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14034-1:2004+A1:2011 | Title of the standard (D): Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14034-2:2006+A1:2011 | Title of the standard (D): Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14034-3:2006+A1:2011 | Title of the standard (D): Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14034-4:2004+A1:2011 | Title of the standard (D): Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14373:2021 | Title of the standard (D): Explosion suppression systems | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/05/2022 | OJ reference for publication in OJ (2): OJ L 140, 19/5/2022 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14373:2005 | Title of the standard (D): Explosion suppression systems | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 19/11/2023 | OJ reference for withdrawal from OJ (7): OJ L 140, 19/5/2022

EN 14460:2006 | Title of the standard (D): Explosion resistant equipment | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 21/07/2018 | OJ reference for withdrawal from OJ (7): OJ C 209 - 15/06/2018

EN 14460:2018 | Title of the standard (D): Explosion resistant equipment | 60.60 Standard published | | Date of start of presumption of conformity (1): 15/06/2018 | OJ reference for publication in OJ (2): OJ C 209 - 15/06/2018 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14491:2012 | Title of the standard (D): Dust explosion venting protective systems | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14492-1:2006+A1:2009/AC:2010 | Title of the standard (D): Cranes - Power driven winches and hoists - Part 1: Power driven winches | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14492-1:2006+A1:2009 | Title of the standard (D): Cranes - Power driven winches and hoists - Part 1: Power driven winches | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14492-1:2006+A1:2009 | Title of the standard (D): Cranes - Power driven winches and hoists - Part 1: Power driven winches | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14492-2:2006+A1:2009/AC:2010 | Title of the standard (D): Cranes - Power driven winches and hoists - Part 2: Power driven hoists | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 08/09/2017 | OJ reference for publication in OJ (2): OJ C 298 - 08/09/2017 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14492-2:2006+A1:2009 | Title of the standard (D): Cranes - Power driven winches and hoists - Part 2: Power driven hoists | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14492-2:2006+A1:2009 | Title of the standard (D): Cranes - Power driven winches and hoists - Part 2: Power driven hoists | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 08/09/2017 | OJ reference for publication in OJ (2): OJ C 298 - 08/09/2017 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14522:2005 | Title of the standard (D): Determination of the auto ignition temperature of gases and vapours | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14591-1:2004/AC:2006 | Title of the standard (D): Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14591-1:2004 | Title of the standard (D): Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14591-1:2004 | Title of the standard (D): Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14591-2:2007/AC:2008 | Title of the standard (D): Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14591-2:2007 | Title of the standard (D): Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14591-4:2007/AC:2008 | Title of the standard (D): Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14591-4:2007 | Title of the standard (D): Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14677:2008 | Title of the standard (D): Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel | 90.92 Standard to be revised | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14678-1:2013 | Title of the standard (D): LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14681:2006+A1:2010 | Title of the standard (D): Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14756:2006 | Title of the standard (D): Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 11/01/2018 | OJ reference for withdrawal from OJ (7): OJ C 183 - 09/06/2017

EN 14797:2006 | Title of the standard (D): Explosion venting devices | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14973:2015 | Title of the standard (D): Conveyor belts for use in underground installations - Electrical and flammability safety requirements | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14983:2007 | Title of the standard (D): Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage | 90.92 Standard to be revised | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14986:2007 | Title of the standard (D): Design of fans working in potentially explosive atmospheres | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 31/01/2020 | OJ reference for withdrawal from OJ (7): OJ C 183 - 09/06/2017

EN 14986:2017 | Title of the standard (D): Design of fans working in potentially explosive atmospheres | 60.60 Standard published | | Date of start of presumption of conformity (1): 09/06/2017 | OJ reference for publication in OJ (2): OJ C 183 - 09/06/2017 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 14994:2007 | Title of the standard (D): Gas explosion venting protective systems | 90.60 Close of review | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 15089:2009 | Title of the standard (D): Explosion isolation systems | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 15188:2007 | Title of the standard (D): Determination of the spontaneous ignition behaviour of dust accumulations | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 27/11/2022 | OJ reference for withdrawal from OJ (7): OJ L 186 - 27/05/2021

EN 15188:2020 | Title of the standard (D): Determination of the spontaneous ignition behaviour of dust accumulations | 60.60 Standard published | | Date of start of presumption of conformity (1): 27/05/2021 | OJ reference for publication in OJ (2): OJ L 186 - 27/05/2021 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 15198:2007 | Title of the standard (D): Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 15233:2007 | Title of the standard (D): Methodology for functional safety assessment of protective systems for potentially explosive atmospheres | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 15268:2008 | Title of the standard (D): Petrol filling stations - Safety requirements for the construction of submersible pump assemblies | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 15794:2009 | Title of the standard (D): Determination of explosion points of flammable liquids | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 15967:2011 | Title of the standard (D): Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 16009:2011 | Title of the standard (D): Flameless explosion venting devices | 90.60 Close of review | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 16020:2011 | Title of the standard (D): Explosion diverters | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 16447:2014 | Title of the standard (D): Explosion isolation flap valves | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 17077:2018 | Title of the standard (D): Determination of burning behaviour of dust layers | 60.60 Standard published | | Date of start of presumption of conformity (1): 12/10/2018 | OJ reference for publication in OJ (2): OJ C 371 - 12/10/2018 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 1710:2005+A1:2008/AC:2010 | Title of the standard (D): Equipment and components intended for use in potentially explosive atmospheres in underground mines | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/10/2018 | OJ reference for withdrawal from OJ (7): OJ C 371 - 12/10/2018

EN 1710:2005+A1:2008 | Title of the standard (D): Equipment and components intended for use in potentially explosive atmospheres in underground mines | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/10/2018 | OJ reference for withdrawal from OJ (7): OJ C 371 - 12/10/2018

EN 1710:2005+A1:2008 | Title of the standard (D): Equipment and components intended for use in potentially explosive atmospheres in underground mines | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/10/2018 | OJ reference for withdrawal from OJ (7): OJ C 371 - 12/10/2018

EN 1755:2015 | Title of the standard (D): Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 1834-1:2000 | Title of the standard (D): Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

**EN 1834-2:2000 | Title of the standard (D): Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to fire | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 1834-3:2000 | Title of the standard (D): Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 1839:2012 | Title of the standard (D): Determination of explosion limits of gases and vapours | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 11/01/2018 | OJ reference for withdrawal from OJ (7): OJ C 183 - 09/06/2017

EN 1839:2017 | Title of the standard (D): Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours | 60.60 Standard published | | Date of start of presumption of conformity (1): 09/06/2017 | OJ reference for publication in OJ (2): OJ C 183 - 09/06/2017 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 1953:2013 | Title of the standard (D): Atomising and spraying equipment for coating materials - Safety requirements | 90.92 Standard to be revised | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50050:2006 | Title of the standard (D): Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 14/10/2016 | OJ reference for withdrawal from OJ (7): OJ C 126 - 08/04/2016

EN 50050-1:2013 | Title of the standard (D): Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50050-2:2013 | Title of the standard (D): Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50050-3:2013 | Title of the standard (D): Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50104:2010 | Title of the standard (D): Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50176:2009 | Title of the standard (D): Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50177:2009/A1:2012 | Title of the standard (D): Stationary electrostatic application equipment for ignitable coating powders - Safety requirements | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50177:2009 | Title of the standard (D): Stationary electrostatic application equipment for ignitable coating powders - Safety requirements | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50223:2010 | Title of the standard (D): Stationary electrostatic application equipment for ignitable flock material - Safety requirements | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 13/04/2018 | OJ reference for withdrawal from OJ (7): OJ C 126 - 08/04/2016

EN 50223:2015 | Title of the standard (D): Stationary electrostatic application equipment for ignitable flock material - Safety requirements | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50271:2010 | Title of the standard (D): Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 15/06/2021 | OJ reference for withdrawal from OJ (7): OJ C 371 - 12/10/2018

EN 50271:2018 | Title of the standard (D): Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies | 60.60 Standard published | | Date of start of presumption of conformity (1): 12/10/2018 | OJ reference for publication in OJ (2): OJ C 371 - 12/10/2018 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50281-2-1:1998/corrigendum Aug. 1999 | Title of the standard (D): Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50281-2-1:1998 | Title of the standard (D): Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50303:2000 | Title of the standard (D): Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50381:2004/corrigendum Dec. 2005 | Title of the standard (D): Transportable ventilated rooms with or without an internal source of release | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50381:2004 | Title of the standard (D): Transportable ventilated rooms with or without an internal source of release | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 50495:2010 | Title of the standard (D): Safety devices required for the safe functioning of equipment with respect to explosion risks | 90.93 Standard confirmed | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-0:2012/A11:2013 | Title of the standard (D): Explosive atmospheres - Part 0: Equipment - General requirements | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 06/07/2021 | OJ reference for withdrawal from OJ (7): OJ L 189 - 15/07/2019

EN 60079-0:2012 | Title of the standard (D): Explosive atmospheres - Part 0: Equipment - General requirements | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 06/07/2021 | OJ reference for withdrawal from OJ (7): OJ L 189 - 15/07/2019

EN 60079-1:2007 | Title of the standard (D): Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures 'd' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 01/08/2017 | OJ reference for withdrawal from OJ (7): OJ C 126 - 08/04/2016

EN 60079-1:2014 | Title of the standard (D): Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures 'd' | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-11:2012 | Title of the standard (D): Explosive atmospheres - Part 11: Equipment protection by intrinsic safety 'i' | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-15:2010 | Title of the standard (D): Explosive atmospheres - Part 15: Equipment protection by type of protection 'n' | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-18:2009 | Title of the standard (D): Explosive atmospheres - Part 18: Equipment protection by encapsulation 'm' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 16/01/2018 | OJ reference for withdrawal from OJ (7): OJ C 126 - 08/04/2016

EN 60079-18:2015/A1:2017 | Title of the standard (D): Explosive atmospheres - Part 18: Equipment protection by encapsulation 'm' | 60.60 Standard published | | Date of start of presumption of conformity (1): 09/03/2018 | OJ reference for publication in OJ (2): OJ C 092 - 09/03/2018 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-18:2015 | Title of the standard (D): Explosive atmospheres - Part 18: Equipment protection by encapsulation 'm' | 60.60 Standard published | | Date of start of presumption of conformity (1): 09/03/2018 | OJ reference for publication in OJ (2): OJ C 092 - 09/03/2018 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-18:2015 | Title of the standard (D): Explosive atmospheres - Part 18: Equipment protection by encapsulation 'm' | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 28/09/2020 | OJ reference for withdrawal from OJ (7): OJ C 092 - 09/03/2018

EN 60079-2:2007 | Title of the standard (D): Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure 'p' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 25/08/2017 | OJ reference for withdrawal from OJ (7): OJ C 126 - 08/04/2016

EN 60079-2:2014/AC:2015 | Title of the standard (D): Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure 'p' | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-2:2014 | Title of the standard (D): Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure 'p' | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-2:2014 | Title of the standard (D): Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure 'p' | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-20-1:2010 | Title of the standard (D): Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-25:2010/AC:2013 | Title of the standard (D): Explosive atmospheres - Part 25: Intrinsically safe electrical systems | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-25:2010 | Title of the standard (D): Explosive atmospheres - Part 25: Intrinsically safe electrical systems | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-26:2007 | Title of the standard (D): Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 01/12/2017 | OJ reference for withdrawal from OJ (7): OJ C 126 - 08/04/2016

EN 60079-26:2015 | Title of the standard (D): Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-27:2008 | Title of the standard (D): Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 12/08/2016 | OJ reference for withdrawal from OJ (7): OJ C 293 - 12/08/2016

EN 60079-28:2007 | Title of the standard (D): Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 01/07/2018 | OJ reference for withdrawal from OJ (7): OJ C 126 - 08/04/2016

EN 60079-28:2015 | Title of the standard (D): Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-29-1:2007 | Title of the standard (D): Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 23/12/2019 | OJ reference for withdrawal from OJ (7): OJ C 183 - 09/06/2017

EN 60079-29-1:2016 | Title of the standard (D): Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases | 60.60 Standard published | | Date of start of presumption of conformity (1): 09/06/2017 | OJ reference for publication in OJ (2): OJ C 183 - 09/06/2017 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-29-4:2010 | Title of the standard (D): Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-30-1:2007 | Title of the standard (D): Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 06/03/2020 | OJ reference for withdrawal from OJ (7): OJ C 298 - 08/09/2017

EN 60079-30-1:2017 | Title of the standard (D): Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements | 60.60 Standard published | | Date of start of presumption of conformity (1): 08/09/2017 | OJ reference for publication in OJ (2): OJ C 298 - 08/09/2017 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-31:2009 | Title of the standard (D): Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure 't' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 01/01/2017 | OJ reference for withdrawal from OJ (7): OJ C 126 - 08/04/2016

EN 60079-31:2014 | Title of the standard (D): Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure 't' | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-35-1:2011/AC:2011 | Title of the standard (D): Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-35-1:2011 | Title of the standard (D): Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-5:2007 | Title of the standard (D): Explosive atmospheres - Part 5: Equipment protection by powder filling 'q' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 24/03/2018 | OJ reference for withdrawal from OJ (7): OJ C 126 - 08/04/2016

EN 60079-5:2015 | Title of the standard (D): Explosive atmospheres - Part 5: Equipment protection by powder filling 'q' | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-6:2007 | Title of the standard (D): Explosive atmospheres - Part 6: Equipment protection by oil immersion 'o' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 27/03/2018 | OJ reference for withdrawal from OJ (7): OJ C 126 - 08/04/2016

EN 60079-6:2015 | Title of the standard (D): Explosive atmospheres - Part 6: Equipment protection by liquid immersion 'o' | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 60079-7:2007 | Title of the standard (D): Explosive atmospheres - Part 7: Equipment protection by increased safety 'e' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 31/07/2018 | OJ reference for withdrawal from OJ (7): OJ C 126 - 08/04/2016

EN 60079-7:2015 | Title of the standard (D): Explosive atmospheres - Part 7: Equipment protection by increased safety 'e' | 60.60 Standard published | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 19/01/2021 | OJ reference for withdrawal from OJ (7): OJ C 209 - 15/06/2018

EN 60079-7:2015 | Title of the standard (D): Explosive atmospheres - Part 7: Equipment protection by increased safety 'e' | 60.60 Standard published | | Date of start of presumption of conformity (1): 15/06/2018 | OJ reference for publication in OJ (2): OJ C 209 - 15/06/2018 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN 61241-4:2006 | Title of the standard (D): Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection 'pD' | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 25/08/2017 | OJ reference for withdrawal from OJ (7): OJ C 126 - 08/04/2016

EN IEC 60079-0:2018 | Title of the standard (D): Explosive atmospheres - Part 0: Equipment - General requirements | 60.60 Standard published | | Date of start of presumption of conformity (1): 15/07/2019 | OJ reference for publication in OJ (2): OJ L 189 - 15/07/2019 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN IEC 60079-7:2015/A1:2018 | Title of the standard (D): Explosive atmospheres - Part 7: Equipment protection by increased safety 'e' | 60.60 Standard published | | Date of start of presumption of conformity (1): 15/06/2018 | OJ reference for publication in OJ (2): OJ C 209 - 15/06/2018 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN ISO 16852:2010 | Title of the standard (D): Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2008, including Cor 1:2008 and Cor 2:2009) | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): 30/11/2017 | OJ reference for withdrawal from OJ (7): OJ C 183 - 09/06/2017

EN ISO 16852:2016 | Title of the standard (D): Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016) | 60.60 Standard published | | Date of start of presumption of conformity (1): 09/06/2017 | OJ reference for publication in OJ (2): OJ C 183 - 09/06/2017 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN ISO 80079-36:2016 | Title of the standard (D): Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) | 60.60 Standard published | | Date of start of presumption of conformity (1): 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

**EN ISO 80079-37:2016 | Title of the standard (D): Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k'' (ISO 80079-37:2016 | 60.60 Standard published | | Date of start of presumption of conformity (1): 12/08/2016 | OJ reference for publication in OJ (2): OJ C 293 - 12/08/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN ISO/IEC 80079-20-2:2016/AC:2017 | Title of the standard (D): Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods (ISO/IEC 80079-20-2:2016) | 60.60 Standard published | | Date of start of presumption of conformity (1): 09/03/2018 | OJ reference for publication in OJ (2): OJ C 092 - 09/03/2018 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN ISO/IEC 80079-20-2:2016 | Title of the standard (D): Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods (ISO/IEC 80079-20-2:2016) | 60.60 Standard published | | Date of start of presumption of conformity (1): 09/03/2018 | OJ reference for publication in OJ (2): OJ C 092 - 09/03/2018 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN ISO/IEC 80079-34:2011 | Title of the standard (D): Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN ISO/IEC 80079-34:2011 | Title of the standard (D): Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) | 99.60 Withdrawal effective | | Date of start of presumption of conformity (1): 20/04/2016 | OJ reference for publication in OJ (2): OJ C 126 - 08/04/2016 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN ISO/IEC 80079-38:2016/A1:2018 | Title of the standard (D): Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) | 60.60 Standard published | | Date of start of presumption of conformity (1): 12/10/2018 | OJ reference for publication in OJ (2): OJ C 371 - 12/10/2018 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

EN ISO/IEC 80079-38:2016 | Title of the standard (D): Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) | 60.60 Standard published | | Date of start of presumption of conformity (1): 12/10/2018 | OJ reference for publication in OJ (2): OJ C 371 - 12/10/2018 | Restriction: - | Date of start of presumption of conformity with restriction (4): | OJ reference for publication of a restriction in OJ (5): - | Date of withdrawal from OJ (end of presumption of conformity) (6): | OJ reference for withdrawal from OJ (7): -

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements

99.60 Withdrawal effective

CEN/TC 198

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery

99.60 Withdrawal effective

CEN/TC 198

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology

60.60 Standard published

CEN/TC 305

Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining

90.93 Standard confirmed

CEN/TC 305

Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements

90.60 Close of review

CEN/TC 271

Machinery for the supply and circulation of coating materials under pressure - Safety requirements

60.60 Standard published

CEN/TC 271

Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

90.60 Close of review

CEN/TC 271

Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers

99.60 Withdrawal effective

CEN/TC 393

Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres

90.92 Standard to be revised

CEN/TC 305

Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device

90.92 Standard to be revised

CEN/TC 393

Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

99.60 Withdrawal effective

CEN/TC 393

Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers

99.60 Withdrawal effective

CEN/TC 393

Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves

99.60 Withdrawal effective

CEN/TC 393

Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers

99.60 Withdrawal effective

CEN/TC 393

Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions

99.60 Withdrawal effective

CEN/TC 286

LPG equipment and accessories - Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions

60.60 Standard published

CEN/TC 286

Cranes - Offshore cranes - Part 1: General-purpose offshore cranes

60.60 Standard published

CEN/TC 147

Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds

90.93 Standard confirmed

CEN/TC 305

Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds

90.93 Standard confirmed

CEN/TC 305

Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds

90.93 Standard confirmed

CEN/TC 305

Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds

90.93 Standard confirmed

CEN/TC 305

Explosion suppression systems

99.60 Withdrawal effective

CEN/TC 305

Explosion suppression systems

60.60 Standard published

CEN/TC 305

Explosion resistant equipment

60.60 Standard published

CEN/TC 305

Dust explosion venting protective systems

90.93 Standard confirmed

CEN/TC 305

Cranes - Power driven winches and hoists - Part 1: Power driven winches

90.93 Standard confirmed

CEN/TC 147

Cranes - Power driven winches and hoists - Part 1: Power driven winches

60.60 Standard published

CEN/TC 147

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

99.60 Withdrawal effective

CEN/TC 147

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

99.60 Withdrawal effective

CEN/TC 147

Determination of the auto ignition temperature of gases and vapours

99.60 Withdrawal effective

CEN/TC 305

Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure

90.93 Standard confirmed

CEN/TC 305

Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure

60.60 Standard published

CEN/TC 305

Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers

90.20 Standard under periodical review

CEN/TC 305

Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers

60.60 Standard published

CEN/TC 305

Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers

90.20 Standard under periodical review

CEN/TC 305

Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers

60.60 Standard published

CEN/TC 305

Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel

90.92 Standard to be revised

CEN/TC 322

LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers

90.93 Standard confirmed

CEN/TC 286

Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces

60.60 Standard published

CEN/TC 322

Explosion venting devices

90.93 Standard confirmed

CEN/TC 305

Conveyor belts for use in underground installations - Electrical and flammability safety requirements

90.93 Standard confirmed

CEN/TC 188

Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage

90.92 Standard to be revised

CEN/TC 305

Design of fans working in potentially explosive atmospheres

60.60 Standard published

CEN/TC 305

Gas explosion venting protective systems

90.92 Standard to be revised

CEN/TC 305

Explosion isolation systems

90.93 Standard confirmed

CEN/TC 305

Determination of the spontaneous ignition behaviour of dust accumulations

60.60 Standard published

CEN/TC 305

Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres

90.93 Standard confirmed

CEN/TC 305

Methodology for functional safety assessment of protective systems for potentially explosive atmospheres

90.93 Standard confirmed

CEN/TC 305

Petrol filling stations - Safety requirements for the construction of submersible pump assemblies

90.93 Standard confirmed

CEN/TC 393

Determination of explosion points of flammable liquids

90.93 Standard confirmed

CEN/TC 305

Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours

99.60 Withdrawal effective

CEN/TC 305

Flameless explosion venting devices

90.60 Close of review

CEN/TC 305

Explosion diverters

90.93 Standard confirmed

CEN/TC 305

Explosion isolation flap valves

60.60 Standard published

CEN/TC 305

Determination of burning behaviour of dust layers

90.93 Standard confirmed

CEN/TC 305

Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres

99.60 Withdrawal effective

CEN/TC 150

Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres

90.93 Standard confirmed

CEN/TC 270

Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust

90.93 Standard confirmed

CEN/TC 270

Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres

90.93 Standard confirmed

CEN/TC 270

Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours

90.93 Standard confirmed

CEN/TC 305

Atomising and spraying equipment for coating materials - Safety requirements

90.92 Standard to be revised

CEN/TC 271

Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials

90.93 Standard confirmed

CLC/TC 31

Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder

90.93 Standard confirmed

CLC/TC 31

Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock

90.93 Standard confirmed

CLC/TC 31

Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods

99.60 Withdrawal effective

CLC/TC 31

Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements

60.60 Standard published

CLC/TC 31

Stationary electrostatic application equipment for ignitable coating powders - Safety requirements

90.93 Standard confirmed

CLC/TC 31

Stationary electrostatic application equipment for ignitable coating powders - Safety requirements

60.60 Standard published

CLC/TC 31

Stationary electrostatic application equipment for ignitable flock material - Safety requirements

90.93 Standard confirmed

CLC/TC 31

Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies

90.93 Standard confirmed

CLC/TC 31

Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust

99.60 Withdrawal effective

CLC/TC 31

Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust

99.60 Withdrawal effective

CLC/TC 31

Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust

90.93 Standard confirmed

CLC/TC 31

Transportable ventilated rooms with or without an internal source of release

90.93 Standard confirmed

CLC/TC 31

Transportable ventilated rooms with or without an internal source of release

60.60 Standard published

CLC/TC 31

Safety devices required for the safe functioning of equipment with respect to explosion risks

90.93 Standard confirmed

CLC/TC 31

Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 15: Equipment protection by type of protection "n"

99.60 Withdrawal effective

CLC/TC 31

Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data

99.60 Withdrawal effective

CLC/TC 31

Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 25: Intrinsically safe electrical systems

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 25: Intrinsically safe electrical systems

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 0: Equipment - General requirements

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

60.60 Standard published

CLC/TC 31

Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)

60.60 Standard published

CEN/TC 305

Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)

60.60 Standard published

CEN/TC 305

Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k'' (ISO 80079-37:2016)

60.60 Standard published

CEN/TC 305

Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods (ISO/IEC 80079-20-2:2016)

60.60 Standard published

CEN/TC 305

Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test methods - Technical Corrigendum 1 (ISO/IEC 80079-20-2:2016/Cor 1:2017)

60.60 Standard published

CEN/TC 305

Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011)

99.60 Withdrawal effective

CLC/TC 31

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)

60.60 Standard published

CEN/TC 305

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)

60.60 Standard published

CEN/TC 305