Road vehicles

Related standards or drafts

Public transport - Road vehicles - Visible variable passenger information devices inside the vehicle

90.93 Standard confirmed

CEN/TC 278

Amendment 1 - Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz

60.60 Standard published

CISPR/CIS/D

Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz

60.60 Standard published

CISPR/CIS/D

Technical Requirements for Current Collectors for ground-level feeding system on road vehicles in operation

60.60 Standard published

CLC/TC 9X

Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces

90.93 Standard confirmed

CEN/TC 168

Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces

60.60 Standard published

CEN/TC 168

Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres

90.92 Standard to be revised

CEN/TC 168

Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains

90.93 Standard confirmed

CEN/TC 168

Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes

90.60 Close of review

CEN/TC 168

Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements

90.60 Close of review

CEN/TC 119

Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements

90.93 Standard confirmed

CEN/TC 301

Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 1: General safety and performance requirements

60.60 Standard published

CEN/TC 301

Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures

90.93 Standard confirmed

CEN/TC 301

Road vehicles for combined transport - Semitrailer - Vertical transhipment

90.60 Close of review

CEN/TC 119

Road vehicles - Roller brake testers for vehicles of more than 3,5 tons GVW - Safety requirements

60.60 Standard published

CEN/TC 301

Road vehicles - Machines for mounting and demounting vehicle tyres - Safety requirements

60.60 Standard published

CEN/TC 301

Road vehicles - Portable Emission Measuring Systems (PEMS) - Performance assessment

60.60 Standard published

CEN/TC 301

Thermal road vehicles - Temperature-controlled systems using flammable refrigerants for transport of goods - Requirements and risk analysis process

60.60 Standard published

CEN/TC 413

Lashing and securing arrangements on road vehicles for sea transportation on Ro/ro ships - General requirements - Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded (ISO 9367-1:1989)

90.93 Standard confirmed

CEN/BT

Lashing and securing arrangements on road vehicles for sea transportation on Ro/ro ships - General requirements - Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded (ISO 9367-1:1989)

60.60 Standard published

CEN/BT

Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Part 2: Semi-trailers (ISO 9367-2:1994)

90.93 Standard confirmed

CEN/BT

Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors

60.60 Standard published

CLC/TC 9X

Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors

60.60 Standard published

CLC/TC 9X

Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter

60.60 Standard published

CLC/TC 9X

Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests

60.60 Standard published

CLC/TC 21X

Secondary batteries (except lithium) for the propulsion of electric road vehicles - Part 4: Safety requirements of nickel-metal hydride cells and modules

60.60 Standard published

CLC/TC 21X

Secondary batteries (except lithium) for the propulsion of electric road vehicles - Part 4: Safety requirements of nickel-metal hydride cells and modules

60.60 Standard published

CLC/TC 21X

Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks

60.60 Standard published

CLC/SR 105

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements

60.60 Standard published

CLC/TC 21X

In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)

60.60 Standard published

CLC/TC 23E

In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)

60.60 Standard published

CLC/TC 23E

In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPDs)

60.60 Standard published

CLC/TC 23E

Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz

60.60 Standard published

CLC/TC 210

Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz

60.60 Standard published

CLC/TC 210

Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements

60.60 Standard published

CLC/TC 34

Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements

60.60 Standard published

CLC/TC 34

Lamps, light sources and led packages for road vehicles - Performance requirements

60.60 Standard published

CLC/TC 34

Lamps, light sources and LED packages for road vehicles - Performance requirements

60.60 Standard published

CLC/TC 34

Lamps, light sources and LED packages for road vehicles - Performance requirements

60.60 Standard published

CLC/TC 34

Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators

60.60 Standard published

CLC/SR 105

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing

60.60 Standard published

CLC/TC 21X

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing

60.60 Standard published

CLC/TC 21X

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements

60.60 Standard published

CLC/TC 21X

In-cable control and protection device (IC-CPD) for mode 2 charging of electric road vehicles

60.60 Standard published

CLC/TC 23E

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium batteries for use in road vehicles not for the propulsion

60.60 Standard published

CLC/TC 21X

Road vehicles - Liquefied natural gas (LNG) refuelling connector - 3,1 MPa connector (ISO 12617:2015, Corrected version 2016-01-15)

60.60 Standard published

CEN/TC 301

Road vehicles - Compressed natural gas (CNG) refuelling connector (ISO 14469:2017)

60.60 Standard published

CEN/TC 301

Road vehicles - Ergonomic aspects of transportation and control systems - Dialogue management principles and compliance procedures (ISO 15005:2017)

60.60 Standard published

CEN/TC 278

Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation (ISO 15006:2011)

60.60 Standard published

CEN/TC 278

Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation (ISO 15008:2017)

60.60 Standard published

CEN/TC 278

Road vehicles - Vehicle to grid communication interface - Part 1: General information and use-case definition (ISO 15118-1:2019)

60.60 Standard published

CEN/TC 301

Road vehicles - Vehicle to grid communication interface - Part 20: 2nd generation network layer and application layer requirements (ISO 15118-20:2022)

60.60 Standard published

CEN/TC 301

Road vehicles - Vehicle-to-grid communication Interface - Part 2: Network and application protocol requirements (ISO 15118-2:2014)

60.60 Standard published

CEN/TC 301

Road vehicles - Vehicle to grid Communication interface - Part 3: Physical and data link layer requirements (ISO 15118-3:2015)

60.60 Standard published

CEN/TC 301

Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test (ISO 15118-4:2018)

60.60 Standard published

CEN/TC 301

Road vehicles - Vehicle to grid communication interface - Part 5: Physical layer and data link layer conformance test (ISO 15118-5:2018)

60.60 Standard published

CEN/TC 301

Road vehicles - Vehicle to grid communication interface - Part 8: Physical layer and data link layer requirements for wireless communication (ISO 15118-8:2020)

60.60 Standard published

CEN/TC 301

Road vehicles - Vehicle to grid communication interface - Part 9: Physical and data link layer conformance test for wireless communication (ISO 15118-9:2022)

60.60 Standard published

CEN/TC 301

Road vehicles - Blended fuels refuelling connector (ISO 16380:2014, including Amd 1:2016)

60.60 Standard published

CEN/TC 301

Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving (ISO 17287:2003)

60.60 Standard published

CEN/TC 278

Electrically propelled road vehicles - Conductive power transfer - Safety requirements (ISO 17409:2020)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition (ISO 18541-1:2021)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements (ISO 18541-2:2021)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements (ISO 18541-3:2021)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test (ISO 18541-4:2021)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 5: Heavy duty specific provision (ISO 18541-5:2018)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018, Corrected version 2018-05)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 1: General information and use case definition (ISO 18542-1:2012)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 2: Standardized process implementation requirements, Registration Authority (ISO 18542-2:2014)

60.60 Standard published

CEN/TC 301

Electrically propelled road vehicles - Magnetic field wireless power transfer - Safety and interoperability requirements (ISO 19363:2020)

60.60 Standard published

CEN/TC 301

Road vehicles - Dimethyl Ether (DME) refuelling connector (ISO 21058:2019)

60.60 Standard published

CEN/TC 301

Road vehicles - Electrical connections - Double-pole connection (ISO 4165:2001)

60.60 Standard published

CEN/BT

Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors

60.60 Standard published

TC 9

Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors

60.60 Standard published

TC 9

Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter

60.60 Standard published

TC 9

Amendment 1 - Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements

60.60 Standard published

TC 34/SC 34A

Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements

60.60 Standard published

TC 34/SC 34A

Amendment 1 - Lamps, light sources and LED packages for road vehicles - Performance requirements

60.60 Standard published

TC 34/SC 34A

Amendment 2 - Lamps, light sources and LED packages for road vehicles - Performance requirements

60.60 Standard published

TC 34/SC 34A

Lamps, light sources and LED packages for road vehicles - Performance requirements

60.60 Standard published

TC 34/SC 34A

Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests

60.60 Standard published

TC 21

Secondary batteries (except lithium) for the propulsion of electric road vehicles - Part 4: Safety requirements of nickel-metal hydride cells and modules

60.60 Standard published

TC 21

Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators

60.60 Standard published

TC 105

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing

60.60 Standard published

TC 21

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing

60.60 Standard published

TC 21

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements

60.60 Standard published

TC 21

In-cable control and protection device (IC-CPD) for mode 2 charging of electric road vehicles

60.60 Standard published

TC 23/SC 23E

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium batteries for use in road vehicles not for the propulsion

60.60 Standard published

TC 21/SC 21A

Environmental conditions - Vibration and shock of electrotechnical equipment - Part 4: Equipment transported in road vehicles

60.60 Standard published

TC 104

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 4: Candidate alternative test methods for the internal short circuit test of IEC 62660-3

60.60 Standard published

TC 21

Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses

60.60 Standard published

TC 9

Road vehicles — Determination of centre of gravity

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Dry ignition coils using rotating high-voltage distributor

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Intelligent power switches — Part 1: High-side intelligent power switch

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Intelligent power switches — Part 2: Low-side intelligent power switch

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Road load — Part 1: Determination under reference atmospheric conditions

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Road load — Part 2: Reproduction on chassis dynamometer

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Flat attachment fixing nuts for commercial vehicles — Test methods

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Measurement equipment for orientation of headlamp luminous beams

90.92 Standard to be revised

ISO/TC 22/SC 35

Road vehicles — Test methods for electrical disturbances from electrostatic discharge

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Communication on FlexRay — Part 1: General information and use case definition

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Communication on FlexRay — Part 2: Communication layer services

90.93 Standard confirmed

ISO/TC 22/SC 31

Acoustics — Specification of test tracks for measuring sound emitted by road vehicles and their tyres

60.60 Standard published

ISO/TC 43/SC 1

Road vehicles — Circuit breakers — Part 1: Definitions and general test requirements

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Circuit breakers — Part 2: User's guide

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Circuit breakers — Part 3: Miniature circuit breakers with tabs (Blade type), Form CB11

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Circuit breakers — Part 4: Medium circuit breakers with tabs (Blade type), Form CB15

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Circuit breakers — Part 5: Circuit breakers with bolt with rated voltage of 450 V

90.92 Standard to be revised

ISO/TC 22/SC 32

Commercial road vehicles — 50 mm drawbar eye — Interchangeability

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Coupling balls for caravans and light trailers — Dimensions

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Pedestrian protection — Impact test method for pedestrian thigh, leg and knee

90.60 Close of review

ISO/TC 22/SC 36

Road vehicles — Roof load carriers

60.60 Standard published

ISO/TC 22/SC 40

Road vehicles — Air filters for passenger compartments — Part 2: Test for gaseous filtration

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Brake lining assemblies — Inertia dynamometer test method

90.20 Standard under periodical review

ISO/TC 22/SC 33

Commercial road vehicles — Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers — Interchangeability

90.93 Standard confirmed

ISO/TC 22/SC 40

Commercial road vehicles — Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers — Interchangeability — Technical Corrigendum 1

60.60 Standard published

ISO/TC 22/SC 40

Commercial road vehicles — Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers — Interchangeability

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Part 1: 13-pole connectors for vehicles with 12 V nominal supply voltage not intended to cross water fords

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Part 2: 13-pole connectors for vehicles with 12 V nominal supply voltage intended to cross water fords

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Off-vehicle radiation sources

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Harness excitation methods

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Reverberation chamber

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 10: Immunity to conducted disturbances in the extended audio frequency range

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 11: Reverberation chamber

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Harness excitation methods

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 7: Direct radio frequency (RF) power injection

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 7: Direct radio frequency (RF) power injection — Amendment 1

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 9: Portable transmitters

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Low-speed serial data communication — Part 1: General and definitions

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Low-speed serial data communication — Part 3: Vehicle area network (VAN)

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Low-speed serial data communication — Part 3: Vehicle area network (VAN) — Amendment 1

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Hydraulic jacks — Specifications

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Stabilizing devices for caravans and light trailers — Part 1: Integrated stabilizers

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Spark-plugs — Test methods and requirements

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Technical documentation of electrical and electronic systems — Part 1: Content of exchanged documents

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Technical documentation of electrical and electronic systems — Part 2: Documentation agreement

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Technical documentation of electrical and electronic systems — Part 3: Application example

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Masses — Vocabulary and codes

90.60 Close of review

ISO/TC 22

Road vehicles and internal combustion engines — Filter vocabulary — Part 1: Definitions of filters and filter components

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles and internal combustion engines — Filter vocabulary — Part 2: Definitions of characteristics of filters and their components

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical coding sublayer

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Controller area network (CAN) — Part 2: High-speed physical medium attachment (PMA) sublayer

90.92 Standard to be revised

ISO/TC 22/SC 31

Road vehicles — Controller area network (CAN) — Part 3: Low-speed, fault-tolerant, medium-dependent interface

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Controller area network (CAN) — Part 3: Low-speed, fault-tolerant, medium-dependent interface — Technical Corrigendum 1

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Controller area network (CAN) — Part 4: Time-triggered communication

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 1: Physical and data-link layers

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 2: Application layer for brakes and running gear

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 3: Application layer for equipment other than brakes and running gear

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 4: Diagnostic communication

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Sensitivity to lateral wind — Open-loop test method using wind generator input

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Airbag components — Part 1: Vocabulary

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Airbag components — Part 2: Testing of airbag modules

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Airbag components — Part 3: Testing of inflator assemblies

90.20 Standard under periodical review

ISO/TC 22/SC 36

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 15-pole connector for vehicles with 24 V nominal supply voltage

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust

60.60 Standard published

ISO/TC 22/SC 34

Road vehicles — Test dust for filter evaluation — Part 2: Aluminium oxide test dust

90.20 Standard under periodical review

ISO/TC 22/SC 34

Road vehicles — Endurance braking systems of motor vehicles and towed vehicles — Test procedures

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Direction-of-motion stereotypes for automotive hand controls

90.60 Close of review

ISO/TC 22/SC 39

Interior air of road vehicles — Part 10: Whole vehicle test chamber — Specification and methods for the determination of volatile organic compounds in cabin interiors — Trucks and buses

60.60 Standard published

ISO/TC 146/SC 6

Interior air of road vehicles — Part 1: Whole vehicle test chamber — Specification and method for the determination of volatile organic compounds in cabin interiors

60.60 Standard published

ISO/TC 146/SC 6

Interior air of road vehicles — Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Bag method

90.93 Standard confirmed

ISO/TC 146/SC 6

Interior air of road vehicles — Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Micro-scale chamber method

90.93 Standard confirmed

ISO/TC 146/SC 6

Interior air of road vehicles — Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Small chamber method

90.93 Standard confirmed

ISO/TC 146/SC 6

Interior air of road vehicles — Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Static chamber method

90.20 Standard under periodical review

ISO/TC 146/SC 6

Interior air of road vehicles — Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature — Small chamber method

90.93 Standard confirmed

ISO/TC 146/SC 6

Interior air of road vehicles — Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements

90.93 Standard confirmed

ISO/TC 146/SC 6

Interior air of road vehicles — Part 8: Handling and packaging of materials and components for emission testing

90.93 Standard confirmed

ISO/TC 146/SC 6

Interior air of road vehicles — Part 9: Determination of the emissions of volatile organic compounds from vehicle interior parts — Large bag method

90.93 Standard confirmed

ISO/TC 146/SC 6

Road vehicles — Traffic accident analysis — Part 1: Vocabulary

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Traffic accident analysis — Part 2: Guidelines for the use of impact severity measures

90.93 Standard confirmed

ISO/TC 22/SC 36

Commercial road vehicles — Drawbar couplings and eyes for rigid drawbars — Part 1: Strength tests for general cargo centre-axle trailers

90.93 Standard confirmed

ISO/TC 22/SC 40

Commercial road vehicles — Drawbar couplings and eyes for rigid drawbars — Part 1: Strength tests for general cargo centre-axle trailers — Technical Corrigendum 1

60.60 Standard published

ISO/TC 22/SC 40

Commercial road vehicles — Drawbar couplings and eyes for rigid drawbars — Part 2: Strength tests for special applications

90.93 Standard confirmed

ISO/TC 22/SC 40

Electrically propelled road vehicles —Test specification for lithium-ion traction battery packs and systems — Part 4: Performance testing

90.60 Close of review

ISO/TC 22/SC 37

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 10: Rigid fuel line in stainless steel

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 11: Fittings

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 1: General requirements and definitions

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 12: Rigid fuel line in copper and its alloys

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 13: Tank pressure control regulator

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 14: Differential pressure fuel content gauge

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 15: Capacitance fuel content gauge

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 16: Heat exchanger-vaporizer

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 17: Natural gas detector

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 18: Gas temperature sensor

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 19: Automatic valve

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 20: Flexible fuel or vent lines

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 2: Performance and general test methods

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 3: Check valve

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 4: Manual valve

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 5: Tank pressure gauge

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 7: Pressure relief valve (PRV)

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 8: Excess flow valve

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 9: Gas-tight housing and ventilation hose

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) refuelling connector — 3,1 MPa connector

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 10: Pressure relief device (PRD)

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 11: Excess flow valve

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 1: General requirements and definitions

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 12: Gas-tight housing and ventilation hoses

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 13: Rigid fuel line in stainless steel

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 14: Flexible fuel line

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 15: Filter

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 16: Fittings

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 2: Performance and general test methods

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 2: Performance and general test methods — Amendment 1

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 3: Pressure regulator

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 3: Pressure regulator — Amendment 1

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 4: Check valve

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 5: Manual cylinder valve

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 6: Automatic valve

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 7: Gas injector

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 8: Pressure indicator

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 9: Pressure relief valve (PRV)

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Refrigerant systems used in mobile air conditioning systems (MAC) — Safety requirements

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations — Part 1: General requirements and definitions

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations — Part 2: Electrical and pneumatic interface for 50 mm fifth wheel couplings

60.60 Standard published

ISO/TC 22/SC 40

Road vehicles — Trailers up to 3,5 t — Requirements for jockey wheels and drawbar supports

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — LED lamp characteristics for bulb compatible failure detection — Part 1: LED lamps used as direction indicators

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Open Test sequence eXchange format (OTX) — Part 1: General information and use cases

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Open Test sequence eXchange format (OTX) — Part 2: Core data model specification and requirements

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Open Test sequence eXchange format (OTX) — Part 3: Standard extensions and requirements

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Open Test sequence eXchange format (OTX) — Part 4: Expanded extensions interface definition

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Reduction of misuse risk of child restraint systems — Part 1: Forms for field studies

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Reduction of misuse risk of child restraint systems — Part 2: Requirements and test procedures for correct installation (panel method)

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Reduction of misuse risk of child restraint systems — Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA)

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 1: Seat bight anchorages and attachments

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 1: Seat bight anchorages and attachments — Amendment 1: CRF reduced height specification

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 1: Seat bight anchorages and attachments — Amendment 3: Specifications for the detection of use of ISOFIX CRS

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 2: Top tether anchorages and attachments

90.20 Standard under periodical review

ISO/TC 22/SC 36

Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 3: Classification of child restraint system and space in vehicle

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 4: Lower tether anchorages

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Child restraint systems — Report form for accidents involving child passengers

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Filler pipes and openings of motor vehicle fuel tanks — Vapour recovery system

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 2: Transport protocol and network layer services

90.92 Standard to be revised

ISO/TC 22/SC 31

Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 2: Transport protocol and network layer services — Amendment 1

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: Wired vehicle interface based on IEEE 802.3

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 4: Ethernet-based high-speed data link connector

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Ignition coils — Electrical characteristics and test methods

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Ignition coils — Electrical characteristics and test methods — Technical Corrigendum 1

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Hydraulic braking systems — Part 1: Double-flare pipes, tapped holes, male fittings and tube seats

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Localization of exhaust system leaks and equipment specifications

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Test method for the quantification of on-centre handling — Part 1: Weave test

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Test method for the quantification of on-centre handling — Part 2: Transition test

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Safety glazing materials — Method for the determination of solar transmittance

60.60 Standard published

ISO/TC 22/SC 35

Road vehicles — Unified diagnostic services (UDS) — Part 1: Application layer

90.92 Standard to be revised

ISO/TC 22/SC 31

Road vehicles — Unified diagnostic services (UDS) — Part 1: Application layer — Amendment 1

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Unified diagnostic services (UDS) — Part 3: Unified diagnostic services on CAN implementation (UDSonCAN)

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Unified diagnostic services (UDS) — Part 4: Unified diagnostic services on FlexRay implementation (UDSonFR)

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — Unified diagnostic services (UDS) — Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP)

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Unified diagnostic services (UDS) — Part 6: Unified diagnostic services on K-Line implementation (UDSonK-Line)

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — Unified diagnostic services (UDS) — Part 7: UDS on local interconnect network (UDSonLIN)

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Unified diagnostic services (UDS) — Part 8: UDS on Clock eXtension Peripheral Interface (UDSonCXPI)

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 1: Physical layer

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 2: Data link layer

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Diagnostic systems — Keyword Protocol 2000 — Part 3: Application layer

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Diagnostic systems — Keyword Protocol 2000 — Part 4: Requirements for emission-related systems

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Wheels and rims — Use, general maintenance and safety requirements and out-of-service conditions

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Compressed natural gas (CNG) refuelling connector

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Pedestrian protection — Head impact test method

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Heavy commercial vehicle combinations and articulated buses — Lateral stability test methods

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Heavy commercial vehicles and buses — Steady-state circular tests

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Heavy commercial vehicles and buses — Lateral transient response test methods

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Ergonomic aspects of transportation and control systems — Dialogue management principles and compliance procedures

90.93 Standard confirmed

ISO/TC 22/SC 39

Road vehicles — Ergonomic aspects of transport information and control systems — Specifications for in-vehicle auditory presentation

90.93 Standard confirmed

ISO/TC 22/SC 39

Road vehicles — Measurement and analysis of driver visual behaviour with respect to transport information and control systems

60.60 Standard published

ISO/TC 22/SC 39

Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and test procedures for in-vehicle visual presentation

90.93 Standard confirmed

ISO/TC 22/SC 39

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 1: General information and use case definition

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Guidance on terms, definitions, abbreviations and acronyms

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits: Specification and use

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment

90.20 Standard under periodical review

ISO/TC 22/SC 31

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 7: Data link security

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars

90.92 Standard to be revised

ISO/TC 22/SC 33

Road vehicles — Vehicle dynamics test methods — Part 2: General conditions for heavy vehicles and buses

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Vehicle dynamics test methods — Part 3: General conditions for passenger cars ride comfort tests

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Tests for rigid plastic safety glazing materials

90.93 Standard confirmed

ISO/TC 22/SC 35

Road vehicles — Vehicle to grid communication interface — Part 1: General information and use-case definition

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles - Vehicle to grid communication interface - Part 1: General information and use case definition

60.60 Standard published

TC 69

Road vehicles — Vehicle to grid communication interface — Part 20: 2nd generation network layer and application layer requirements

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles - Vehicle to grid communication interface - Part 20: Network and application protocol requirements

60.60 Standard published

TC 69

Road vehicles — Vehicle-to-Grid Communication Interface — Part 2: Network and application protocol requirements

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles -- Vehicle-to-Grid Communication Interface -- Part 2: Network and application protocol requirements

60.60 Standard published

TC 69

Road vehicles — Vehicle to grid communication interface — Part 3: Physical and data link layer requirements

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles -- Vehicle to grid communication interface -- Part 3: Physical and data link layer requirements

60.60 Standard published

TC 69

Road vehicles — Vehicle to grid communication interface — Part 4: Network and application protocol conformance test

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test

60.60 Standard published

TC 69

Road vehicles — Vehicle to grid communication interface — Part 5: Physical layer and data link layer conformance test

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles - Vehicles to grid communication interface - Part 5: Physical and data link layer conformance tests

60.60 Standard published

TC 69

Road vehicles — Vehicle to grid communication interface — Part 8: Physical layer and data link layer requirements for wireless communication

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles - Vehicle to grid communication interface - Part 8: Physical layer and data link layer requirements for wireless communication

60.60 Standard published

TC 69

Road vehicles — Vehicle to grid communication interface — Part 9: Physical and data link layer conformance test for wireless communication

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles - Vehicle to grid communication interface - Part 9: Physical and data link layer conformance test for wireless communication

60.60 Standard published

TC 69

Road vehicles — Four-pole electrical connectors with pins and twist lock — Part 1: Dimensions and classes of application

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Four-pole electrical connectors with pins and twist lock — Part 2: Tests and requirements

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Four-pole electrical connectors with pins and twist lock — Part 2: Tests and requirements — Technical Corrigendum 1

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Wheels — Nut seat strength tests

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Brake lining friction materials — Product definition and quality assurance

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 10: Gas-flow adjuster

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 11: Gas/air mixer

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 1: General requirements and definitions

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 12: Pressure relief valve (PRV)

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 13: Pressure relief device (PRD)

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 14: Excess flow valve

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 15: Gas-tight housing and ventilation hose

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 16: Rigid fuel line in stainless steel

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 17: Flexible fuel line

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 18: Filter

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 19: Fittings

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 20: Rigid fuel line in material other than stainless steel

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 21: Discharge line closures

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance and general test methods

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 23: Gas temperature sensor

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 3: Check valve

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 4: Manual valve

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5: Manual cylinder valve

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 6: Automatic valve

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 7: Gas injector

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 8: Pressure indicator

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 9: Pressure regulator

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements — Amendment 1

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Compressed natural gas (CNG) fuel systems — Part 2: Test methods

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 5: Specification for an in-vehicle network connected to the diagnostic link connector

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Offset frontal impact test procedure

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation

90.20 Standard under periodical review

ISO/TC 22/SC 36

Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 1: Vocabulary and rationale

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 2: Mechanical subsystems

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 3: Mechanical requirements for electronic subsystems

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side impact dummy — Part 4: User's manual

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Engine test code — Net power

60.60 Standard published

ISO/TC 22/SC 34

Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 1: General description, basic requirements

90.60 Close of review

ISO/TC 22/SC 39

Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 2: Visibility

90.60 Close of review

ISO/TC 22/SC 39

Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 3: Information devices and controls

90.60 Close of review

ISO/TC 22/SC 39

Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 4: Cabin environment

90.60 Close of review

ISO/TC 22/SC 39

Road vehicles — Engine families for certification of heavy-duty vehicles by Exhaust emission

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Cleanliness of components and systems

90.60 Close of review

ISO/TC 22/SC 34

Road vehicles — Detection of exhaust system leaks — Helium test method and detection device specification

90.93 Standard confirmed

ISO/TC 22/SC 34

Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method

90.92 Standard to be revised

ISO/TC 43/SC 1

Road vehicles — Blended fuels refuelling connector

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Blended fuels refuelling connector — Amendment 1

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures

90.20 Standard under periodical review

ISO/TC 22/SC 35

Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures — Amendment 1: ORP, FeV, MTF10MIN(1:1)/hor, MTF10MIN(1:1)/ver

60.60 Standard published

ISO/TC 22/SC 35

Road vehicles — Ergonomic aspects of transport information and control systems — Occlusion method to assess visual demand due to the use of in-vehicle systems

90.60 Close of review

ISO/TC 22/SC 39

Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 1: General

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Wheels — Measurement of radial and lateral run-out

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Tachograph systems — Part 1: Electromechanical components

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Tachograph systems — Part 2: Recording unit communication interface

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Tachograph systems — Part 3: Motion sensor communication interface

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Tachograph systems — Part 4: Display unit communication interface

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Tachograph systems — Part 6: Diagnostic communication interfaces

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Tachograph systems — Part 7: Parameters

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Controller area network (CAN) conformance test plan — Part 1: Data link layer and physical signalling

90.92 Standard to be revised

ISO/TC 22/SC 31

Road vehicles — Controller area network (CAN) conformance test plan — Part 2: High-speed medium access unit — Conformance test plan

90.92 Standard to be revised

ISO/TC 22/SC 31

Road vehicles — Pedestrian protection — Child head impact test method

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Pedestrian protection — Child head impact test method — Amendment 1

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Video communication interface for cameras (VCIC) — Part 1: General information and use case definition

90.20 Standard under periodical review

ISO/TC 127/SC 3

Road vehicles — Video communication interface for cameras (VCIC) — Part 2: Service discovery and control

90.20 Standard under periodical review

ISO/TC 127/SC 3

Road vehicles — Video communication interface for cameras (VCIC) — Part 3: Camera message dictionary

60.60 Standard published

ISO/TC 127/SC 3

Road vehicles — Video communication interface for cameras (VCIC) — Part 4: Implementation of communication requirements

90.20 Standard under periodical review

ISO/TC 127/SC 3

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Mechanical coupling between tractors and semi-trailers — Part 1: Interchangeability between tractors and semi-trailers for general cargo

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Mechanical coupling between tractors and semi-trailers — Part 1: Interchangeability between tractors and semi-trailers for general cargo — Technical Corrigendum 1

60.60 Standard published

ISO/TC 22/SC 40

Road vehicles — Mechanical couplings between tractors and semi-trailers — Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Mechanical couplings between tractors and semi-trailers — Part 3: Requirements for semi-trailer contact area to fifth wheel

60.60 Standard published

ISO/TC 22/SC 40

Road vehicles — Pneumatic braking connections between motor vehicles and towed vehicles — Interchangeability

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Ergonomic aspects of transport information and control systems — Procedure for assessing suitability for use while driving

90.60 Close of review

ISO/TC 22/SC 39

Road vehicles — Open interface for embedded automotive applications — Part 1: General structure and terms, definitions and abbreviated terms

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Open interface for embedded automotive applications — Part 2: OSEK/VDX specifications for binding OS, COM and NM

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Open interface for embedded automotive applications — Part 3: OSEK/VDX Operating System (OS)

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Open interface for embedded automotive applications — Part 4: OSEK/VDX Communication (COM)

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Open interface for embedded automotive applications — Part 5: OSEK/VDX Network Management (NM)

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Open interface for embedded automotive applications — Part 6: OSEK/VDX Implementation Language (OIL)

90.93 Standard confirmed

ISO/TC 22/SC 31

Electrically propelled road vehicles — Conductive power transfer — Safety requirements

60.60 Standard published

ISO/TC 22/SC 37

Road Vehicles — Glow plugs with conical seating and their cylinder head housing — Part 1: Basic characteristics and dimensions for metal-sheath-type glow plugs

60.60 Standard published

ISO/TC 22/SC 32

Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs

90.93 Standard confirmed

ISO/TC 22/SC 32

Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 3: Tests and requirements

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Safety glazing materials — Test methods for properties of electrically heated glazing

90.93 Standard confirmed

ISO/TC 22/SC 35

Road vehicles — FlexRay communications system — Part 1: General information and use case definition

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — FlexRay communications system — Part 2: Data link layer specification

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — FlexRay communications system — Part 3: Data link layer conformance test specification

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — FlexRay communications system — Part 4: Electrical physical layer specification

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — FlexRay communications system — Part 5: Electrical physical layer conformance test specification

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — Transport information and control systems — Detection-response task (DRT) for assessing attentional effects of cognitive load in driving

90.93 Standard confirmed

ISO/TC 22/SC 39

Road vehicles — Aerosol separator performance test for internal combustion engines — Part 1: General

90.92 Standard to be revised

ISO/TC 22/SC 34

Road vehicles — Aerosol separator performance test for internal combustion engines — Part 1: General — Amendment 1

60.60 Standard published

ISO/TC 22/SC 34

Road Vehicles — Aerosol separator performance test for internal combustion engines — Part 4: Laboratory fractional efficiency test method

90.20 Standard under periodical review

ISO/TC 22/SC 34

Road vehicles — Information for first and second responders — Part 1: Rescue sheet for passenger cars and light commercial vehicles

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Information for first and second responders — Part 2: Rescue sheet for buses, coaches and heavy commercial vehicles

90.60 Close of review

ISO/TC 22/SC 36

Road vehicles — Information for first and second responders — Part 3: Emergency response guide template

90.60 Close of review

ISO/TC 22/SC 36

Road vehicles — Information for first and second responders — Part 4: Propulsion energy identification

90.93 Standard confirmed

ISO/TC 22/SC 36

Impact test procedures for road vehicles — Seating and positioning procedures for anthropomorphic test devices — Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions

90.93 Standard confirmed

ISO/TC 22/SC 36

Impact test procedures for road vehicles — Seating and positioning procedures for anthropomorphic test devices — Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions — Amendment 1

60.60 Standard published

ISO/TC 22/SC 36

Impact test procedures for road vehicles — Seating and positioning procedures for anthropomorphic test devices — Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions — Amendment 2

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Local Interconnect Network (LIN) — Part 1: General information and use case definition

90.92 Standard to be revised

ISO/TC 22/SC 31

Road vehicles — Local Interconnect Network (LIN) — Part 2: Transport protocol and network layer services

90.92 Standard to be revised

ISO/TC 22/SC 31

Road vehicles — Local Interconnect Network (LIN) — Part 3: Protocol specification

90.92 Standard to be revised

ISO/TC 22/SC 31

Road vehicles — Local Interconnect Network (LIN) — Part 4: Electrical physical layer (EPL) specification 12 V/24 V

90.92 Standard to be revised

ISO/TC 22/SC 31

Road vehicles — Local Interconnect Network (LIN) — Part 6: Protocol conformance test specification

90.92 Standard to be revised

ISO/TC 22/SC 31

Road vehicles — Local Interconnect Network (LIN) — Part 7: Electrical Physical Layer (EPL) conformance test specification

90.92 Standard to be revised

ISO/TC 22/SC 31

Road vehicles — Local Interconnect Network (LIN) — Part 8: Electrical physical layer (EPL) specification: LIN over DC powerline (DC-LIN)

90.20 Standard under periodical review

ISO/TC 22/SC 31

Road vehicles — Trailers up to 3,5 t — Control of welded towing brackets for coupling ball after fatigue testing

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 1: General information and use case definition

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 2: Technical requirements

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 3: Functional user interface requirements

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 4: Conformance test

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 5: Heavy duty specific provision

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 6: L-Category vehicle specific RMI use cases and requirements

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — Standardized repair and maintenance information (RMI) terminology — Part 1: General information and use case definition

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — Standardized repair and maintenance information (RMI) terminology — Part 2: Standardized process implementation requirements, Registration Authority

90.93 Standard confirmed

ISO/TC 22/SC 31

Commercial road vehicles — Coupling equipment between vehicles in multiple vehicle combinations — Strength requirements

90.93 Standard confirmed

ISO/TC 22/SC 40

Commercial road vehicles — Coupling equipment between vehicles in multiple vehicle combinations — Strength requirements — Amendment 1: Clarification for calculation for V-value for combinations including a centre axel trailer (CAT)

60.60 Standard published

ISO/TC 22/SC 40

Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 1: Pocket interface definition

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2: Test methods and general performance requirements

90.20 Standard under periodical review

ISO/TC 22/SC 32

Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 4: Pyrotechnic device and harness connector assembly - type 2

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 1: Requirements for passenger vehicle rear-end targets

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 2: Requirements for pedestrian targets

90.92 Standard to be revised

ISO/TC 22/SC 33

Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 3: Requirements for passenger vehicle 3D targets

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 4: Requirements for bicyclist targets

60.60 Standard published

ISO/TC 22/SC 33

Electrically propelled road vehicles — Magnetic field wireless power transfer — Safety and interoperability requirements

90.92 Standard to be revised

ISO/TC 22/SC 37

Road vehicles — Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles — Part 6: Traction battery packs and systems

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Automotive cables — Part 10: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed, screened or unscreened multi or single core aluminium conductor cables

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Automotive cables — Part 11: Dimensions and requirements for coaxial RF cables with a specified analogue bandwidth up to 6 GHz (20 GHz)

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Automotive cables — Part 1: Vocabulary and design guidelines

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Automotive cables — Part 12: Dimensions and requirements for unscreened twisted pair RF cables with a specified analogue bandwidth up to 1 GHz

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Automotive cables — Part 2: Test methods

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Automotive cables — Part 3: Dimensions and requirements for 30 V a.c. or 60 V d.c. single core copper conductor cables

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Automotive cables — Part 4: Dimensions and requirements for 30 V a.c. and 60 V d.c. single core aluminium conductor cables

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Automotive cables — Part 5: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core copper conductor cables

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Automotive cables — Part 6: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core aluminium conductor cables

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Automotive cables — Part 7: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core copper conductor cables

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Automotive cables — Part 8: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core aluminium conductor cables

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Automotive cables — Part 9: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed, screened or unscreened multi or single core copper conductor cables

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 1: Safety requirements

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 1: Safety requirements — Amendment 1

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied natural gas (LNG) fuel systems — Part 2: Test methods

90.92 Standard to be revised

ISO/TC 22/SC 41

Road vehicles — Ignition systems — Test methods and requirements for high voltage boots on plug-top coils and pencil coils

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Liquefied petroleum gas (LPG) refuelling connector

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Test methods and performance requirements for voltage class B connectors

90.20 Standard under periodical review

ISO/TC 22/SC 32

Road Vehicles — Extended vehicle (ExVe) methodology — Part 1: General information

90.93 Standard confirmed

ISO/TC 22/SC 31

Road Vehicles — Extended vehicle (ExVe) methodology — Part 2: Methodology for designing the extended vehicle

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Extended vehicle (ExVe) web services — Part 1: Content and definitions

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Extended vehicle (ExVe) web services — Part 2: Access

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Extended vehicle (ExVe) web services — Part 3: Security

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Information for remote diagnostic support — General requirements, definitions and use cases

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Information for remote diagnostic support — General requirements, definitions and use cases — Amendment 1

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — H-point machine (HPM-II) — Specifications and procedure for H-point determination

60.60 Standard published

ISO/TC 22/SC 39

Road vehicles — Durability test method for starter motor for stop and start system

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Degrees of protection (IP code) — Protection of electrical equipment against foreign objects, water and access

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Vehicle interface for electronic Periodic Technical Inspection (ePTI) — Part 1: Application and communication requirements

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Vehicle interface for electronic Periodic Technical Inspection (ePTI) — Part 2: Application and communication requirements conformance test plan

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Vehicle interface for electronic Periodic Technical Inspection (ePTI) — Part 3: Data definitions

60.60 Standard published

ISO/TC 22/SC 31

Electrically propelled road vehicles — Determination of power for propulsion of hybrid electric vehicle

90.60 Close of review

ISO/TC 22/SC 37

Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 10: Gas-tight housing

90.20 Standard under periodical review

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 11: Manual shut-off valve

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 1: General requirements and definitions

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 12: Non-return valve

90.20 Standard under periodical review

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 13: Multivalve

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 14: Vaporizer/pressure regulator

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 15: Excess flow valve

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 16: Injectors and gas mixing device/fuel rail

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 17: Gas dosage unit

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 18: Hose

90.20 Standard under periodical review

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 20: Filter unit

90.20 Standard under periodical review

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 21: Pressure and/or temperature sensors

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 2: Performance and general test methods

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 24: Gas tubes

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 25: Gas connections

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 3: 80% stop valve

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 4: Level indicator

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 5: Fuel selection system and electrical installations

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 6: Pressure relief valves (PRV)

90.60 Close of review

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 6: Pressure relief valves (PRV) — Amendment 1

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 7: Remotely controlled service valve with excess flow valve

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 8: Fuel pump

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 9: Pressure relieve device (PRD)

90.93 Standard confirmed

ISO/TC 22/SC 41

Road vehicles — Clock extension peripheral interface (CXPI) — Part 2: Application layer

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Clock extension peripheral interface (CXPI) — Part 3: Transport and network layer

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Clock extension peripheral interface (CXPI) — Part 4: Data link layer and physical layer

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Clock extension peripheral interface (CXPI) — Part 5: Application layer conformance test plan

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Clock extension peripheral interface (CXPI) — Part 6: Transport and network layer conformance test plan

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Clock extension peripheral interface (CXPI) — Part 7: Data link and physical layer conformance test plan

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — 50 ohms impedance radio frequency connection system interface — Part 1: Dimensions and electrical requirements

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — 50 ohms impedance radio frequency connection system interface — Part 2: Test procedures

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems — Test with roller brake tester

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Fuse-links with axial terminals for use in 48V networks — Types SF36-70V, SF51-70V and SF56-70V

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Dimethyl Ether (DME) refuelling connector

90.20 Standard under periodical review

ISO/TC 22/SC 41

Road vehicles — Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester — Part 1: Pneumatic braking systems

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester — Part 2: Air over hydraulic and purely hydraulic braking systems

90.93 Standard confirmed

ISO/TC 22/SC 33

Gas analysis — Analytical methods for hydrogen fuel — Proton exchange membrane (PEM) fuel cell applications for road vehicles

90.60 Close of review

ISO/TC 158

Road vehicles — In-vehicle Ethernet — Part 10: Transport layer and network layer conformance test plans

60.60 Standard published

ISO/TC 22

Road vehicles — In-vehicle Ethernet — Part 11: Application layer to session layer conformance test plans

60.60 Standard published

ISO/TC 22

Road vehicles — In-vehicle Ethernet — Part 1: General information and definitions

60.60 Standard published

ISO/TC 22

Road vehicles — In-vehicle Ethernet — Part 2: Common physical entity requirements

60.60 Standard published

ISO/TC 22

Road vehicles — In-vehicle Ethernet — Part 3: Optical 1-Gbit/s physical entity requirements and conformance test plan

60.60 Standard published

ISO/TC 22

Road vehicles — In-vehicle Ethernet — Part 4: General requirements and test methods of optical gigabit Ethernet components

60.60 Standard published

ISO/TC 22

Road vehicles — In-vehicle Ethernet — Part 5: Optical 1-Gbit/s physical layer system requirements and test plans

60.60 Standard published

ISO/TC 22

Road vehicles — In-vehicle Ethernet — Part 6: Electrical 100-Mbit/s physical entity requirements and conformance test plan

60.60 Standard published

ISO/TC 22

Road vehicles — In-vehicle Ethernet — Part 8: Electrical 100-Mbit/s Ethernet transmission media, components and tests

90.92 Standard to be revised

ISO/TC 22

Road vehicles — Heavy commercial vehicles and buses – Mass moment of inertia measurement

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel systems — Part 1: Safety requirements

90.60 Close of review

ISO/TC 22/SC 41

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel systems — Part 2: Test methods

90.60 Close of review

ISO/TC 22/SC 41

Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 1: General principles

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 2: Dimensional bodywork exchange parameters

60.60 Standard published

ISO/TC 22/SC 40

Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 3: General, mass and administrative exchange parameters

60.60 Standard published

ISO/TC 22/SC 40

Road vehicles — Product data exchange between chassis and body work manufacturers (BEP) — Part 5: Coding of loader crane bodywork

90.20 Standard under periodical review

ISO/TC 22/SC 40

Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 6: Coding of hook loader bodywork

90.60 Close of review

ISO/TC 22/SC 40

Road vehicles — Product data exchange between chassis and body work manufacturers (BEP) — Part 7: Coding of skip loader bodywork

90.60 Close of review

ISO/TC 22/SC 40

Road vehicles — Engine EGR cooler — Heat dissipation test methods

90.20 Standard under periodical review

ISO/TC 22/SC 34

Road vehicles — Safety of the intended functionality

60.60 Standard published

ISO/TC 22/SC 32

Electrically propelled road vehicles — Electrical specifications and tests for voltage class B systems and components — Part 1: Voltage sub-classes and characteristics

60.60 Standard published

ISO/TC 22/SC 37

Electrically propelled road vehicles — Electrical specifications and tests for voltage class B systems and components — Part 2: Electrical tests for components

90.92 Standard to be revised

ISO/TC 22/SC 37

Road vehicles — Crosstalk determination for multi-axis load cell

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Safety enhancement in conjunction with tyre inflation pressure monitoring

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Supply voltage of 48 V — Electrical requirements and tests

60.60 Standard published

ISO/TC 22/SC 32

Electrically propelled road vehicles — Test specification for electric propulsion components — Part 1: General test conditions and definitions

60.60 Standard published

ISO/TC 22/SC 37

Electrically propelled road vehicles — Test specification for electric propulsion components — Part 2: Performance testing of the motor system

90.20 Standard under periodical review

ISO/TC 22/SC 37

Electrically propelled road vehicles — Test specification for electric propulsion components — Part 3: Performance testing of the motor and the inverter

90.20 Standard under periodical review

ISO/TC 22/SC 37

Electrically propelled road vehicles — Test specification for electric propulsion components — Part 4: Performance testing of the DC/DC converter

60.60 Standard published

ISO/TC 22/SC 37

Electrically propelled road vehicles — Test specification for electric propulsion components — Part 5: Operating load testing of the motor system

60.60 Standard published

ISO/TC 22/SC 37

Electrically propelled road vehicles — Test specification for electric propulsion components — Part 6: Operating load testing of motor and inverter

90.20 Standard under periodical review

ISO/TC 22/SC 37

Electrically propelled road vehicles — Test specification for electric propulsion components — Part 7: Operating load testing of the DC/DC converter

60.60 Standard published

ISO/TC 22/SC 37

Road vehicles — Media Oriented Systems Transport (MOST) — Part 10: 150-Mbit/s coaxial physical layer

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 11: 150-Mbit/s coaxial physical layer conformance test plan

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 1: General information and definitions

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 12: 50-Mbit/s balanced media physical layer

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 13: 50-Mbit/s balanced media physical layer conformance test plan

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 14: Lean application layer

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 15: Lean application layer conformance test plan

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 2: Application layer

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 3: Application layer conformance test plan

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 4: Transport layer and network layer

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 5: Transport layer and network layer conformance test plan

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 6: Data link layer

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 7: Data link layer conformance test plan

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 8: 150-Mbit/s optical physical layer

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Media Oriented Systems Transport (MOST) — Part 9: 150-Mbit/s optical physical layer conformance test plan

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Ergonomics aspects of transport information and control systems — Human machine interface specifications for keyless ignition systems

90.20 Standard under periodical review

ISO/TC 22/SC 39

Road vehicles — Test of vehicle air braking systems with a permissible mass of over 3,5 t — Acquisition and use of reference values using a roller brake tester

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Heavy commercial vehicles and buses — Calculation method for steady-state rollover threshold

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Durability test method of starter relay for stop and start system

90.20 Standard under periodical review

ISO/TC 22/SC 32

Road vehicles — Brake linings friction materials — Visual inspection

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Recyclability and recoverability — Calculation method

90.93 Standard confirmed

ISO/TC 22

Road vehicles — Test method to evaluate the performance of autonomous emergency braking systems — Part 1: Car-to-car

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Test method to evaluate the performance of autonomous emergency braking systems — Part 2: Car to pedestrian

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Test method to evaluate the performance of lane-keeping assistance systems

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Dimethyl Ether (DME) fuel system components — Part 1: General requirements and definitions

90.20 Standard under periodical review

ISO/TC 22/SC 41

Road vehicles — Dimethyl Ether (DME) fuel system components — Part 2: Performance and general test methods

90.20 Standard under periodical review

ISO/TC 22/SC 41

Road vehicles — Dimethyl Ether (DME) fuel system components — Part 3: 85% stop valve

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Dimethyl Ether (DME) fuel system components — Part 4: Level indicator

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Dimethyl Ether (DME) fuel system components — Part 6: Pressure relief valve (PRV)

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Dimethyl Ether (DME) fuel system components — Part 9: Pressure relief device (PRD)

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Modular vehicle communication interface (MVCI) — Part 1: Hardware design requirements

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — Modular vehicle communication interface (MVCI) — Part 2: Diagnostic protocol data unit (D-PDU API)

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Modular vehicle communication interface (MVCI) — Part 3: Diagnostic server application programming interface (D-Server API)

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — Open diagnostic data exchange (ODX) — Part 1: Data model specification

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — Open diagnostic data exchange (ODX) — Part 2: Emissions-related diagnostic data

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Open diagnostic data exchange (ODX) — Part 3: Fault symptom exchange description (FXD)

90.60 Close of review

ISO/TC 22/SC 31

Road vehicles — Determination of resistance to forced entry of security glass constructions used in vehicle glazing — Test of glazing systems

90.93 Standard confirmed

ISO/TC 22/SC 35

Road vehicles — Extended Vehicle (ExVe) time critical applications — General requirements, definitions and classification methodology of time-constrained situations related to Road and ExVe Safety (RExVeS)

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Data communication between sensors and data fusion unit for automated driving functions — Logical interface

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Vehicle domain service (VDS) — Part 1: General information and use case definitions

60.60 Standard published

ISO/TC 22/SC 31

Fuel cell road vehicles — Safety specifications — Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen

90.60 Close of review

ISO/TC 22/SC 37

Hybrid-electric road vehicles — Exhaust emissions and fuel consumption measurements — Part 1: Non-externally chargeable vehicles

90.20 Standard under periodical review

ISO/TC 22/SC 37

Hybrid-electric road vehicles — Exhaust emissions and fuel consumption measurements — Part 2: Externally chargeable vehicles

60.60 Standard published

ISO/TC 22/SC 37

Road vehicles — Technical personnel dealing with natural gas vehicles (NGVs) — Training and qualification

60.60 Standard published

ISO/TC 22/SC 41

Fuel cell road vehicles — Energy consumption measurement — Vehicles fuelled with compressed hydrogen

60.60 Standard published

ISO/TC 22/SC 37

Road vehicles — Software update engineering

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Software update engineering — Amendment 1

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Vocabulary and characteristics for engineering of starting devices

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — General requirements and test methods of in-vehicle optical harnesses for up to 100 Gbit/s communication

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Dimethyl ether (DME) refuelling connector with pressure equalizing port

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Sensors for automated driving under adverse weather conditions — Assessment of the cleaning system efficiency

60.60 Standard published

ISO/TC 22/SC 35

Road vehicles — Qualification and certification of technical personnel dealing with natural gas vehicles (NGVs)

60.60 Standard published

ISO/TC 22/SC 41

Road vehicles — Engine test code — Gross power

60.60 Standard published

ISO/TC 22/SC 34

Road vehicles — Symbols for controls, indicators and tell-tales

60.60 Standard published

ISO/TC 22/SC 39

Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1

60.60 Standard published

ISO/TC 22/SC 39

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — End-of-life activation of in-vehicle pyrotechnic devices — Part 1: Application and communication interface

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — End-of-life activation of in-vehicle pyrotechnic devices — Part 3: Data definitions

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Ergonomic aspects of transport information and control systems — Simulated lane change test to assess in-vehicle secondary task demand

90.93 Standard confirmed

ISO/TC 22/SC 39

Road vehicles — Functional safety — Part 10: Guidelines on ISO 26262

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Functional safety — Part 11: Guidelines on application of ISO 26262 to semiconductors

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Functional safety — Part 1: Vocabulary

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Functional safety — Part 12: Adaptation of ISO 26262 for motorcycles

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Functional safety — Part 2: Management of functional safety

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Functional safety — Part 3: Concept phase

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Functional safety — Part 4: Product development at the system level

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Functional safety — Part 5: Product development at the hardware level

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Functional safety — Part 6: Product development at the software level

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Functional safety — Part 7: Production, operation, service and decommissioning

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Functional safety — Part 8: Supporting processes

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Functional safety — Part 9: Automotive safety integrity level (ASIL)-oriented and safety-oriented analyses

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Brake lining friction materials — Standard performance test procedure for commercial vehicles with air brakes

90.60 Close of review

ISO/TC 22/SC 33

Road vehicles — Brake lining friction materials — Standard wear test procedure for commercial vehicles with air brakes

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Brake lining friction materials — Friction behaviour assessment for automotive brake systems

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 1: General information and use case definition

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary — Amendment 1

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3: Common message dictionary

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 4: Connection between vehicle and test equipment

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Brake lining friction materials — Evaluation of corrosion effects on painted backing plates and brake shoes

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Securing of cargo in passenger cars, station wagons and multi-purpose vehicles — Requirements and test methods

90.60 Close of review

ISO/TC 22/SC 36

Road vehicles — Securing of cargo in delivery vans — Requirements and test methods

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 1: Vehicles and child restraint systems equipped with ISOFIX anchorages and attachments

90.92 Standard to be revised

ISO/TC 22/SC 36

Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 3: Installation of child restraint systems using vehicle seat belts

90.92 Standard to be revised

ISO/TC 22/SC 36

Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 4: Securing of child in child restraint system and daily handling aspects

90.92 Standard to be revised

ISO/TC 22/SC 36

Road vehicles — Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems — Part 5: Installation and securing of child in a booster system

90.92 Standard to be revised

ISO/TC 22/SC 36

Road vehicles — Exterior protection for passenger cars

60.60 Standard published

ISO/TC 22

Road vehicles — Passenger car wheels for road use — Test methods

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Injection water — Part 1: Quality requirements

60.60 Standard published

ISO/TC 22/SC 34

Road vehicles — Evaluation of protrusions inside passenger cars

90.93 Standard confirmed

ISO/TC 22

Road vehicles — 50 semi-trailer fifth wheel coupling pin — Basic and mounting/interchangeability dimensions

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — 50 semi-trailer fifth wheel coupling pin — Basic and mounting/interchangeability dimensions — Technical Corrigendum 1

60.60 Standard published

ISO/TC 22/SC 40

Road vehicles — Screened and waterproof spark-plugs and their connections — Types 1A and 1B

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Test scenarios for automated driving systems — Vocabulary

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Test scenarios for automated driving systems — Scenario based safety evaluation framework

60.60 Standard published

ISO/TC 22/SC 33

Road Vehicles — Test scenarios for automated driving systems — Specification for operational design domain

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Test scenarios for automated driving systems — Scenario categorization

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Safety glazing materials — Vocabulary

90.92 Standard to be revised

ISO/TC 22/SC 35

Road vehicles — Safety glazing materials — Mechanical tests

90.93 Standard confirmed

ISO/TC 22/SC 35

Road vehicles — Safety glazing materials — Test methods for optical properties

90.93 Standard confirmed

ISO/TC 22/SC 35

Road vehicles — Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — High-tension connections for ignition coils and distributors — Part 1: Socket-type

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — High-tension connectors for ignition coils and distributors — Part 2: Plug-types

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Frontal fixed barrier or pole impact test procedure

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Pressure test connection for compressed-air pneumatic braking equipment

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Clevis couplings — Interchangeability

60.60 Standard published

ISO/TC 22/SC 40

Acoustics — Engineering method for measurement of noise emitted by accelerating road vehicles — Part 1: M and N categories

60.60 Standard published

ISO/TC 43/SC 1

Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 2: L category

90.93 Standard confirmed

ISO/TC 43/SC 1

Acoustics — Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 3: Indoor testing M and N categories

60.60 Standard published

ISO/TC 43/SC 1

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Vehicle identification number (VIN) — Content and structure

90.93 Standard confirmed

ISO/TC 22

Road vehicles — World manufacturer identifier (WMI) code

90.93 Standard confirmed

ISO/TC 22

Road vehicles — World manufacturer identifier (WMI) code — Technical Corrigendum 1

60.60 Standard published

ISO/TC 22

Road vehicles — Measurement of impact velocity in collision tests

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials

90.60 Close of review

ISO/TC 22

Road vehicles — Hydraulic pressure test connection for braking equipment

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Unscreened high-voltage ignition cables — General specifications, test methods and requirements

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Types — Terms and definitions

90.60 Close of review

ISO/TC 22

Road vehicles — Fifth wheels — Interchangeability

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Towing vehicle coupling device to tow caravans or light trailers — Mechanical strength test

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Labelling of containers for petroleum-based or non-petroleum-based brake fluid

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Wheels/rims for commercial vehicles — Test methods

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Screened and waterproof spark-plug and its connection — Type 2

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Screened and waterproof spark-plug and its connection — Type 3

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Safety glazing materials — Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering

90.93 Standard confirmed

ISO/TC 22/SC 35

Road vehicles — Measurement methods for exhaust gas emissions during inspection or maintenance

90.20 Standard under periodical review

ISO/TC 22/SC 34

Road vehicles — Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Fuel injection pump testing — Part 1: Dynamic conditions

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Fuel injection pump testing — Part 2: Static conditions

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Fuel injection pump testing — Part 3: Application and test procedures

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Fuel injection pump testing — Part 3: Application and test procedures — Amendment 1

60.60 Standard published

ISO/TC 22/SC 34

Road vehicles — Fuel filters for diesel engines — Test methods

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Ignition coils — Low-tension cable connections

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Vehicle identification number (VIN) — Location and attachment

90.93 Standard confirmed

ISO/TC 22

Road vehicles — Hydraulic braking systems — Simple flare pipes, tapped holes, male fittings and hose end fittings

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Pneumatic braking systems — Part 1: Pipes, male fittings and tapped holes with facial sealing surface

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Pneumatic braking systems — Part 2: Pipes, male fittings and holes with conical sealing surface

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Location of hand controls, indicators and tell-tales in motor vehicles

90.60 Close of review

ISO/TC 22/SC 39

Road vehicles — Motor vehicles — Flasher units

90.93 Standard confirmed

ISO/TC 22/SC 35

Road vehicles — 90 semi-trailer fifth wheel kingpin — Interchangeability

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Definitions, tests and requirements

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Definitions, tests and requirements — Amendment 1

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — World parts manufacturer identifier (WPMI) code

90.60 Close of review

ISO/TC 22

Road vehicles — Calibration fluids for diesel injection equipment

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Three-dimensional reference system and fiducial marks — Definitions

90.93 Standard confirmed

ISO/TC 22

Road vehicles — Dimensional codes for passenger cars

90.60 Close of review

ISO/TC 22

Road vehicles — Multi-core connecting cables — Part 1: Test methods and requirements for basic performance sheathed cables

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Multi-core connecting cables — Part 2: Test methods and requirements for high performance sheathed cables

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Multi-core connecting cables — Part 4: Test methods and requirements for coiled cable assemblies

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Special warning lamps — Dimensions

90.93 Standard confirmed

ISO/TC 22/SC 35

Road vehicles — Electrical connections — Double-pole connection

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Visibility — Method for establishment of eyellipses for driver's eye location

60.60 Standard published

ISO/TC 22/SC 35

Road vehicles — Specification of non-petroleum-based brake fluids for hydraulic systems

90.92 Standard to be revised

ISO/TC 22/SC 33

Road vehicles — Hydraulic braking systems — Non-petroleum-based reference fluid

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)

90.93 Standard confirmed

ISO/TC 22/SC 33

Acoustics — Measurements of sound pressure level emitted by stationary road vehicles

90.20 Standard under periodical review

ISO/TC 43/SC 1

Commercial road vehicles — Ball-bearing turntable — Interchangeability

60.60 Standard published

ISO/TC 22/SC 40

Road vehicles — Anchorages for towing ropes, cables or bars

90.93 Standard confirmed

ISO/TC 22/SC 40

Electrically propelled road vehicles — Functional and safety requirements for power transfer between vehicle and external electric circuit — Part 1: General requirements for conductive power transfer

60.60 Standard published

ISO/TC 22/SC 37

Electrically propelled road vehicles — Functional and safety requirements for power transfer between vehicle and external electric circuit — Part 2: AC power transfer

60.60 Standard published

ISO/TC 22/SC 37

Electrically propelled road vehicles — Functional and safety requirements for power transfer between vehicle and external electric circuit — Part 3: DC power transfer

60.60 Standard published

ISO/TC 22/SC 37

Road vehicles — Testing the abrasion resistance of automotive glazing with the windscreen wiper test

60.60 Standard published

ISO/TC 22/SC 35

Road vehicles — Rear view mirrors — Test method for determining reflectance

90.93 Standard confirmed

ISO/TC 22/SC 35

Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions

90.60 Close of review

ISO/TC 22

Road vehicles — Brake linings — Compressive strain test methods

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Brake linings — Internal shear strength of lining material — Test procedure

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Brake linings — Effects of heat on dimensions and form of disc brake pads — Test procedure

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Brake linings — Resistance to water, saline solution, oil and brake fluid — Test procedure

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Brake linings — Seizure to ferrous mating surface due to corrosion — Test procedure

90.20 Standard under periodical review

ISO/TC 22/SC 33

Electrically propelled road vehicles — Safety specifications — Part 1: Rechargeable energy storage system (RESS)

90.92 Standard to be revised

ISO/TC 22/SC 37

Electrically propelled road vehicles — Safety specifications — Part 1: Rechargeable energy storage system (RESS) — Amendment 1: Safety management of thermal propagation

60.60 Standard published

ISO/TC 22/SC 37

Electrically propelled road vehicles — Safety specifications — Part 2: Vehicle operational safety

60.60 Standard published

ISO/TC 22/SC 37

Electrically propelled road vehicles — Safety specifications — Part 3: Electrical safety

90.92 Standard to be revised

ISO/TC 22/SC 37

Electrically propelled road vehicles — Safety specifications — Part 4: Post crash electrical safety

90.93 Standard confirmed

ISO/TC 22/SC 37

Road vehicles — Measurement techniques in impact tests — Instrumentation

90.92 Standard to be revised

ISO/TC 22/SC 36

Road vehicles — Measurement techniques in impact tests — Instrumentation — Amendment 1

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Ignition systems — Part 1: Vocabulary

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Ignition systems — Part 2: Electrical performance and function test methods

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Collection of accident data for evaluation of occupant restraint performance

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Hydraulic braking systems, including those with electronic control functions, for motor vehicles — Test procedures

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Dimensions of two-wheeled mopeds and motorcycles — Terms and definitions

90.93 Standard confirmed

ISO/TC 22/SC 38

Road vehicles — Motorcycles and mopeds — Symbols for controls, indicators and tell-tales

60.60 Standard published

ISO/TC 22/SC 38

Road vehicles — Air braking systems — Identification of connections on units

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Motor vehicles — Production conformity requirements for flasher units

90.93 Standard confirmed

ISO/TC 22/SC 35

Road vehicles — Collision classification — Terminology

90.92 Standard to be revised

ISO/TC 22/SC 36

Road vehicles — Unscreened high-voltage ignition cable assemblies — Test methods and general requirements

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Sound signalling devices — Tests after mounting on vehicle

90.20 Standard under periodical review

ISO/TC 22/SC 32

Road vehicles — Sound signalling devices — Tests after mounting on vehicle — Amendment 1

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Light alloy wheels — Lateral impact test

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Petroleum-based brake-fluid for stored-energy hydraulic brakes

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Hydraulic braking systems — ISO reference petroleum base fluid

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles — Part 1: Dimensions

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Coiled tube assemblies for air brake connection between towing and towed vehicles — Part 2: Performance requirements

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Lateral transient response test methods — Open-loop test methods

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Fuel injection equipment testing — Part 1: Calibrating nozzle and holder assemblies

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Fuel injection equipment testing — Part 2: Orifice plate flow-measurement

90.93 Standard confirmed

ISO/TC 22/SC 34

Commercial road vehicles — Flat attachment wheel fixing nuts

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Electrical/electronic switching devices — Part 1: Relays and flashers

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Electrical/electronic switching devices — Part 2: Electronic devices

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Electrical/electronic switching devices — Part 3: Microrelays

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Retro-reflective registration plates for motor vehicles and trailers — Specification

90.93 Standard confirmed

ISO/TC 22/SC 35

Road vehicles — Thermoplastics tubing for air braking systems

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Brake linings — Disc brake pads — Evaluation of surface and material flaws after testing

90.20 Standard under periodical review

ISO/TC 22/SC 33

Road vehicles — Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Compressed air braking systems for towed vehicles including those with electronic braking control functions — Test procedures

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions — Test procedures

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Vocabulary and general considerations

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Diagnostic systems — Graphical symbols

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Trailers up to 3,5 t — Calculation of the mechanical strength of steel drawbars

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Commercial vehicles — Couplings between power take-offs (PTO) and ancillary driven units

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Spin-on fuel filters for diesel engines — Mounting and connecting dimensions

90.93 Standard confirmed

ISO/TC 22/SC 34

Commercial road vehicles — Dimensional codes

90.93 Standard confirmed

ISO/TC 22/SC 40

Commercial road vehicles — Connections for rear-mounted power take-offs (PTO)

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Car radio for front installation — Installation space including connections

90.93 Standard confirmed

ISO/TC 22/SC 32

Commercial road vehicles — Steering ball joints

90.93 Standard confirmed

ISO/TC 22/SC 40

Commercial road vehicles — Side openings for truck power take-offs

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions

90.93 Standard confirmed

ISO/TC 22/SC 36

Commercial road vehicles and buses over 3,5 t — Front towing attachments

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Connections for on-board electrical wiring harnesses — Part 1: Tabs for single-pole connections — Dimensions and specific requirements

90.60 Close of review

ISO/TC 22/SC 32

Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Terminology, test methods and general performance requirements

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Connections for on-board electrical wiring harnesses — Part 3: Tabs for multi-pole connections — Dimensions and specific requirements

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Connections for on-board electrical wiring harnesses — Part 4: Pins for single- and multi-pole connections — Dimensions and specific requirements

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Connections for on-board electrical wiring harnesses — Part 5: Test methods and general performance requirements for wiring harness connector operation

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Diametral pitch starter motor pinions

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Measurement of road surface friction

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Diesel engines — Screw-in injector, type 22

90.93 Standard confirmed

ISO/TC 22/SC 34

Electric road vehicles — Reference energy consumption and range — Test procedures for passenger cars and light commercial vehicles

60.60 Standard published

ISO/TC 22/SC 37

Electric road vehicles — Road operating characteristics

90.92 Standard to be revised

ISO/TC 22

Road vehicles — Fifth wheel kingpins — Strength test

90.93 Standard confirmed

ISO/TC 22/SC 40

Commercial road vehicles — Fifth wheel couplings — Strength tests

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Drawbar couplings and eyes for hinged drawbars — Strength tests

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Measurement techniques in impact tests — Optical instrumentation

90.93 Standard confirmed

ISO/TC 22/SC 36

Commercial road vehicles — 40 mm drawbar eye — Interchangeability

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Fuse-links — Part 10: Fuse-links with tabs Type L (high current miniature)

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Fuse-links — Part 11: Fuse-links with tabs (blade type) Type M (medium-high current)

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Fuse-links — Part 1: Definitions and general test requirements

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Fuse-links — Part 12: Fuse-links with tabs (blade type) Type N (sub miniature)

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Fuse-links — Part 13: Fuse-links with tabs (blade type) Type P (sub miniature three tabs)

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Fuse-links — Part 2: User guidelines

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Fuse-links — Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Fuse-links — Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Fuse-links — Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Fuse-links — Part 6: Single-bolt fuse-links

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Fuse-links — Part 8: Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V

90.20 Standard under periodical review

ISO/TC 22/SC 32

Road vehicles — Fuse-links — Part 9: Fuse-links with shortened tabs (Type K)

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Alternators with regulators — Test methods and general requirements

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Vehicle dynamics and road-holding ability — Vocabulary

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Electrical performance of starter motors — Test methods and general requirements

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Compression-ignition engines — Screw-in injection nozzle holder, type 23

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Graphical symbols to designate brake fluid types

90.93 Standard confirmed

ISO/TC 22/SC 33

Road vehicles — Diagnostic systems — Requirements for interchange of digital information

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Diagnostic systems — Part 2: CARB requirements for interchange of digital information

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Diagnostic systems — Part 2: CARB requirements for interchange of digital information — Amendment 1

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Diagnostic systems — Part 3: Verification of the communication between vehicle and OBD II scan tool

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Nozzle spouts for unleaded gasoline

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Nozzle spouts for leaded gasoline and diesel fuel

90.93 Standard confirmed

ISO/TC 22/SC 34

Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships — General requirements — Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded

90.93 Standard confirmed

ISO/TC 22/SC 40

Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships — General requirements — Part 2: Semi-trailers

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Metric starter motor pinions — Part 1: Currently used pinions

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Metric starter motor pinions — Part 2: Pinions with 20 degree pressure angle

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Fuel pump electric connections

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Passenger-car and trailer combinations — Lateral stability test

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Partial driving automation — Technical characteristics of conditional hands-free driving systems

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Brake lining friction materials — Drag mode friction test for hydraulic and pneumatic vehicle brakes

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Brake lining friction materials — Dynamometer metal pick-up generation procedure for disc brakes

60.60 Standard published

ISO/TC 22/SC 33

Road vehicles — Field load specification for brake actuation and modulation systems

90.92 Standard to be revised

ISO/TC 22/SC 33

Road vehicles — Guidelines for auditing cybersecurity engineering

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Functional safety — Use of pre-existing software architectural elements

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Cybersecurity engineering

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Calibration of electromagnetic field strength measuring devices — Part 1: Devices for measurement of electromagnetic fields at frequencies > 0 Hz

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Calibration of electromagnetic field strength measuring devices — Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags

60.60 Standard published

ISO/TC 22/SC 36

Fuel cell road vehicles — Performance measurement — Vehicles fuelled with compressed hydrogen

60.60 Standard published

ISO/TC 22/SC 37

Road vehicles — Ergonomic aspects of transport information and control systems — Introduction to integrating safety critical and time critical warning signals

60.60 Standard published

ISO/TC 22/SC 39

Road vehicles — Dummies for restraint system testing — Part 1: Adult dummies

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Dummies for restraint system testing — Part 2: Child dummies

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Injury risk curves for the evaluation of occupant protection in side impact tests

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Determination of head contact and duration in impact tests

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Traffic accident analysis — Part 3: Guidelines for the interpretation of recorded crash pulse data to determine impact severity

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Traffic accident analysis — Part 4: Compilation of methodologies for assessment of vehicle safety system effectiveness

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Risk of thoracic injury associated with Hybrid III sternal deflection due to shoulder belt loading

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Calculation processes for the neck injury criteria in rear impact

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Test procedures for evaluating child restraint system interactions with deploying air bags

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Side impact testing of child restraint systems — Review of background data and test methods, and conclusions from the ISO work as of November 2005

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Test procedures for evaluating out-of-position vehicle occupant interactions with deploying side air bags

90.92 Standard to be revised

ISO/TC 22/SC 36

Road vehicles — Heat rating of spark plugs

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Development guidelines for vehicle based software

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Pedestrian protection — Targets for the assessment of the biofidelity of pedestrian-leg test devices

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Objective rating metrics for dynamic systems

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Ergonomic aspects of in-vehicle presentation for transport information and control systems — Warning systems

60.60 Standard published

ISO/TC 22/SC 39

Fuel cell road vehicles — Cold start performances under sub-zero temperature — Vehicles fuelled with compressed hydrogen

60.60 Standard published

ISO/TC 22/SC 37

Impact test procedures for road vehicles — Rear seat positioning procedures for Hybrid III 5th percentile female dummy

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Local Interconnect Network (LIN) — Part 5: Application programmers interface (API)

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Injury risk curves for the THOR dummy

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Extended vehicle (ExVe) web services — Part 4: Control

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Prospective safety performance assessment of pre-crash technology by virtual simulation — Part 1: State-of-the-art and general method overview

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Human performance and state in the context of automated driving — Part 1: Common underlying concepts

60.60 Standard published

ISO/TC 22/SC 39

Road vehicles — Human performance and state in the context of automated driving — Part 2: Considerations in designing experiments to investigate transition processes

60.60 Standard published

ISO/TC 22/SC 39

Road Vehicles — Ergonomic aspects of external visual communication from automated vehicles to other road users

60.60 Standard published

ISO/TC 22/SC 39

Road vehicles — Solutions for remote access to vehicle — Criteria for risk assessment

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Extended vehicle (ExVe) web services — Result of the risk assessment on ISO 20078 series

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Temperature measurement in anthropomorphic test devices — Definition of the temperature sensor locations

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Comparison between ISO 26262-12 and other parts of the ISO 26262 series to support motorcycle adaptation

60.60 Standard published

ISO/TC 22/SC 38

Road vehicles — Safety and cybersecurity for automated driving systems — Design, verification and validation

90.92 Standard to be revised

ISO/TC 22

Road vehicles — Analysis of technical changes of ISO 5011:2020

60.60 Standard published

ISO/TC 22/SC 34

Road vehicles — Electrical disturbances from conduction and coupling — Part 5: Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Injury risk curves for evaluation of occupant protection in frontal impact

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Instructions for the implementation of the assignment of world manufacturer identifier (WMI) codes for vehicle identification number (VIN) systems and for world parts manufacturer identifier (WPMI) codes

60.60 Standard published

ISO/TC 22

Electrically propelled road vehicles — Vocabulary

90.92 Standard to be revised

ISO/TC 22/SC 37

Road vehicles — Anthropomorphic side impact dummy — Lateral impact response requirements to assess the biofidelity of the dummy

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Application of predictive maintenance to hardware with ISO 26262-5

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Functional safety — Application to generic rechargeable energy storage systems for new energy vehicle

60.60 Standard published

ISO/TC 22/SC 32

Road vehicles — Air filters for passenger compartments — Part 1: Test for particulate filtration

90.92 Standard to be revised

ISO/TC 22/SC 34

Road vehicles — Test contaminants for filter evaluation — Part 3: Soot contaminant

60.60 Standard published

ISO/TC 22/SC 34

Road vehicles — Sled test method to enable the evaluation of side impact protection of child restraint systems — Essential parameters

90.20 Standard under periodical review

ISO/TC 22/SC 36

Road vehicles — Multimedia data exchange format for impact tests

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems

90.93 Standard confirmed

ISO/TC 22/SC 39

Road vehicles — Test procedures — Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags

90.20 Standard under periodical review

ISO/TC 22/SC 36

Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 5: Dummy design updates

90.92 Standard to be revised

ISO/TC 22/SC 36

Road vehicles — Ergonomic aspects of transport information and control systems (TICS) — Procedures for determining priority of on-board messages presented to drivers

90.60 Close of review

ISO/TC 22/SC 39

Road vehicles — Aerosol separator performance test for internal combustion engines — Part 2: Laboratory test method

90.92 Standard to be revised

ISO/TC 22/SC 34

Road vehicles — Aerosol separator performance test for internal combustion engines — Part 3: Method to perform engine gravimetric test

90.92 Standard to be revised

ISO/TC 22/SC 34

Road Vehicles — Aerosol separator performance test for internal combustion engines — Part 5: Engine fractional efficiency test method and upstream distribution sampling method

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Objective rating metric for non-ambiguous signals

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 5: Pyrotechnic device and harness connector assembly - type 3 (only two-way)

90.92 Standard to be revised

ISO/TC 22/SC 32

Road vehicles — Inlet air cleaning equipment for internal combustion engines and compressors — Part 1: Fractional efficiency testing with fine particles (0,3 µm to 5 µm optical diameter)

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Inlet air cleaning equipment for internal combustion engines and compressors — Part 2: Fractional efficiency testing with coarse particles (5 µm to 40 µm optical diameter)

90.93 Standard confirmed

ISO/TC 22/SC 34

Road vehicles — Extended vehicle (ExVe) methodology — Part 3: Upstream process to develop services

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Design and performance specifications for advanced Pedestrian Legform Impactor (aPLI)

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Injury risk functions for advanced pedestrian legform impactor (aPLI)

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Drawbar couplings, drawbar eyes, fifth wheel kingpins, hook couplings and toroidal eyes — Wear limits for in-use mechanical couplings

90.60 Close of review

ISO/TC 22/SC 40

Road vehicles — Multidimensional measurement and coordinate systems definition

90.20 Standard under periodical review

ISO/TC 22/SC 36

Road vehicles — Product data exchange between chassis and bodywork manufacturers (BEP) — Part 4: Mapping to STEP application protocol 239

90.93 Standard confirmed

ISO/TC 22/SC 40

Road vehicles — Displacement calibration method of IR-TRACC devices

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment

90.93 Standard confirmed

ISO/TC 22/SC 32

Road vehicles — Prospective safety performance assessment of pre-crash technology by virtual simulation — Part 2: Guidelines and requirements for application

60.60 Standard published

ISO/TC 22/SC 36

Road vehicles — Visibility — Specifications and test procedures for head-up displays (HUD)

60.60 Standard published

ISO/TC 22/SC 35

Road vehicles — Test object monitoring and control for active safety and automated/autonomous vehicle testing — Functional requirements, specifications and communication protocol

90.92 Standard to be revised

ISO/TC 22/SC 33

Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 1: Specifications and test methods

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 2: Resonator specification

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 3: Labelling

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Vehicles safety information model (VSIM)

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Calibration procedure for displacement devices

90.20 Standard under periodical review

ISO/TC 22/SC 36

Road vehicles - Child restraint systems - Sled test method to enable the evaluation of side impact protection

90.93 Standard confirmed

ISO/TC 22/SC 36

Road vehicles — Anti-fog coating for exterior lighting devices — Specification

60.60 Standard published

ISO/TC 22/SC 35

Electrically propelled road vehicles — Functional and safety requirements for power transfer between vehicle and external electric circuit — Part 5: Automatic conductive power transfer

60.60 Standard published

ISO/TC 22/SC 37

Road Vehicles — Electrical disturbance by conduction and coupling — Part 4: Electrical transient conduction along shielded high voltage supply lines only

90.93 Standard confirmed

ISO/TC 22/SC 32