prEN 378-2 rev

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation prEN 378-2 rev

Scope

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.

The term “refrigerating system” used in this European Standard includes heat pumps.

This Part 2 of this Standard is applicable to the design, construction and installation of refrigerating systems including piping, components and materials. It includes ancillary equipment not covered in EN 378-1, EN 378-3, EN 378-5 or ISO 5149-4 which is directly associated with these systems. It also specifies requirements for testing, commissioning, marking and documentation. Requirements for secondary heat transfer circuits are excluded except for any protection requirements associated with the refrigerating system. Ancillary equipment includes, for example, fans, fan motors, electrical motors and transmission assemblies for open compressor systems.

This standard applies:
a)to refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by aspecific product standard, e.g. ISO 13043;
b)to secondary cooling or heating systems;
c)to the location of the refrigerating systems;
d)to replaced parts and added components after adoption of this standard if they are not identical in function and inthe capacity.

Systems using refrigerants other than those listed in prEN 378-5 are not covered by this standard.

This standard does not apply to goods in storage.

This standard is not applicable to refrigerating systems which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.

This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.

This standard also applies in the case of the conversion of a system to another refrigerant type, in which case conformity to the relevant clauses of parts 1 to 3 and 5 of the standard and ISO 5149-4 shall be assessed.

Related legislation

Legislation related to this standard