EN 1010-5:2005/FprA1

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board EN 1010-5:2005/FprA1

Scope

This standard applies to machines for the production of corrugated board and the conversion of flat and corrugated board:
- corrugated board production machines;
- folder gluer machines;
- printer slotters, rotary die cutters and combined machines (inline machines);
- stand-alone platen presses, for single stroke mode, dwell mode and continuous operation mode, for cutting and creasing;
- automatic flatbed punching machines;
- tube winding machines.
This document shall be used together with EN 1010-1:2004+A1:2010. Both parts together identify all significant hazards relevant to machines for the production of corrugated board and the conversion of flat and corrugated board when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements in EN 1010-5 take precedence over respective requirements in EN 1010-1:2004+A1:2010.
This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004+A1:2010. However, this document specifies requirements for noise reduction of corrugated board and flatbed punching machines.
This document is not applicable to machines for the production of corrugated board and machines for the conversion of flat and corrugated board which are manufactured before the date of publication of this document by CEN.

Related legislation

Legislation related to this standard