Main menu
See at the end of the page for the list of work items identified as a high priority for SMEs in Europe.
The following Technical Committees have been considered to be of highest priority in the Mechanical and Machinery Sector for SMEs:
CLC/TC 2 - Rotating machinery
CEN/TC 10 - Lifts, escalators and moving walks
CEN/TC 23 - Transportable gas cylinders
CLC/TC 26 - Electric welding
CEN/TC 54 - Unfired pressure vessels
CEN/TC 69 - Industrial valves
CEN/TC 74 - Flanges and their joints
CEN/TC 98 - Lifting platforms
CEN/TC 114 - Safety of machinery
CEN/TC 121 - Welding and allied processes
CEN/TC 142 - Woodworking machines - Safety
CEN/TC 143 - Machine tools - Safety
CEN/TC 144 - Tractors and machinery for agriculture and forestry
CEN/TC 145 - Plastics and rubber machines
CEN/TC 146 - Packaging machines - Safety
CEN/TC 147 - Cranes - Safety
CEN/TC 148 - Continuous handling equipment and systems - Safety
CEN/TC 150 - Industrial Trucks - Safety
CEN/TC 151 - Construction equipment and building material machines - Safety
CEN/TC 153 - Machinery intended for use with foodstuffs and feed
CEN/TC 168 - Chains, ropes, webbing, slings and accessories - Safety
CEN/TC 182 - Refrigerating systems, safety and environmental requirements
CEN/TC 186 - Industrial thermoprocessing - Safety
CEN/TC 197 - Pumps
CEN/TC 198 - Printing and paper machinery - Safety
CEN/TC 202 - Foundry machinery
CEN/TC 210 - GRP tanks and vessels
CEN/TC 214 - Textile machinery and accessories
CEN/TC 255 - Hand-held, non-electric power tools - Safety
CEN/TC 267 - Industrial piping and pipelines
CEN/TC 268 - Cryogenic vessels and specific hydrogen technologies applications
CEN/TC 269 - Shell and water-tube boilers
CEN/TC 270 - Internal combustion engines
CEN/TC 271 - Surface treatment equipment - Safety
CEN/TC 286 - Liquefied petroleum gas equipment and accessories
CEN/TC 322 - Equipments for making and shaping of metals - Safety requirements
CEN/TC 393 - Equipment for storage tanks and for filling stations
CEN/TC 399 - Gas Turbines applications - Safety
CEN/TC 438 - Additive Manufacturing
CLC/TC 44X - Safety of machinery: electrotechnical aspects
SMEs in Europe can check and monitor in a very simple way the Draft European standards being developed to support the application of the following EU Directives:
In addition, the following Regulations are also associated with the Mechanical sector:
Below you can find an interactive list of work items for follow up of the priorities for SMEs in Europe in the Mechanical and machinery sector. Click below on each work item for additional information.
State of the art on the use of flammable refrigerant alternatives, in particular from class A3, in refrigeration, air conditioning and heat pump equipment
60.60 Standard published
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 1: Common requirements for machinery and processing plants
40.60 Close of voting
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 2: Specific requirements for feeding machinery and continuous handling equipment
40.60 Close of voting
Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
40.60 Close of voting
Transportable gas cylinders - Fully wrapped composite cylinders
60.60 Standard published
LPG equipment and accessories - Equipping of LPG road tankers
60.60 Standard published
Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements
60.60 Standard published
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
50.60 Close of voting. Proof returned by secretariat
Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler
60.60 Standard published
Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
60.60 Standard published
Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler
60.60 Standard published
Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler
60.60 Standard published
Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks
30.98 Project deleted
Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks
60.60 Standard published
LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
60.60 Standard published
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
60.60 Standard published
Unfired pressure vessels - Part 3: Design
40.97 End of interruption of work - split/merged
Unfired pressure vessels - Part 3: Design
40.97 End of interruption of work - split/merged
Unfired pressure vessels - Part 3: Design
40.97 End of interruption of work - split/merged
Unfired pressure vessels - Part 3: Design
40.97 End of interruption of work - split/merged
Unfired pressure vessels - Part 3: Design
40.97 End of interruption of work - split/merged
Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
40.60 Close of voting
Metallic industrial piping - Part 3: Design and calculation
60.60 Standard published
Metallic industrial piping - Part 3: Design and calculation
20.60 Close of comment period
Metallic industrial piping - Part 4: Fabrication and installation
60.60 Standard published
Metallic industrial piping - Part 4: Fabrication and installation
60.60 Standard published
Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
45.99 Dispatch of FV draft to CCMC
Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene
60.60 Standard published
LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
60.60 Standard published
Food processing machinery - Portion cutting machines - Safety and hygiene requirements
50.60 Close of voting. Proof returned by secretariat
Food processing machinery - Clipping machines - Safety and hygiene requirements
60.60 Standard published
Plastics and rubber machines - Two-roll mills - Safety requirements
60.60 Standard published
LPG equipment and accessories - Transportable refillable composite cylinders for LPG - Design and construction
60.60 Standard published
Welding and allied processes - Environmental check list
50.60 Close of voting. Proof returned by secretariat
LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
60.60 Standard published
Machines and installations for the exploitation and processing of natural stone - Safety - Part 1: Requirements for stationary diamond wire saws
60.60 Standard published
Machines and installations for the exploitation and processing of natural stone - Safety - Part 2: Requirements for transportable diamond wire saws
60.60 Standard published
Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landing
60.60 Standard published
Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 %
60.60 Standard published
Drilling and foundation equipment - Safety - Part 1: Common requirements
50.60 Close of voting. Proof returned by secretariat
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering in soil or soil and rock mixture
50.60 Close of voting. Proof returned by secretariat
Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
50.60 Close of voting. Proof returned by secretariat
Drilling and foundation equipment - Safety - Part 4: Foundation equipment
50.60 Close of voting. Proof returned by secretariat
Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
50.60 Close of voting. Proof returned by secretariat
Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
50.60 Close of voting. Proof returned by secretariat
Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment
50.60 Close of voting. Proof returned by secretariat
Industrial trucks - Safety requirements and verification - Part 2: Supplementary requirements for self-propelled variable-reach trucks
60.60 Standard published
Industrial trucks - Safety requirements and verification - Part 3: Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to EN 16307-1)
60.60 Standard published
Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
60.60 Standard published
Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety
50.60 Close of voting. Proof returned by secretariat
Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles
60.60 Standard published
Industrial trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
60.60 Standard published
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
40.98 Project deleted
Earth-moving machinery - Safety - Part 10: Requirements for trenchers
60.60 Standard published
Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill compactors
60.60 Standard published
Earth-moving machinery - Safety - Part 1: General requirements
60.60 Standard published
Earth-moving machinery - Safety - Part 12: Requirements for cable excavators
60.60 Standard published
Earth-moving machinery - Safety - Part 13: Requirements for rollers
60.60 Standard published
Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers
60.60 Standard published
Earth-moving machinery - Safety - Part 3: Requirements for loaders
60.60 Standard published
Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders
60.60 Standard published
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
60.60 Standard published
Earth-moving machinery - Safety - Part 6: Requirements for dumpers
60.60 Standard published
Earth-moving machinery - Safety - Part 7: Requirements for scrapers
60.60 Standard published
Earth-moving machinery - Safety - Part 8: Requirements for graders
60.60 Standard published
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers
60.60 Standard published
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
40.60 Close of voting
Continuous handling equipment and systems - Safety requirements for equipment for mechanical handling of unit loads
60.60 Standard published
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods passenger lifts in existing building
60.60 Standard published
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts
60.60 Standard published
Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test
60.60 Standard published
Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts
60.60 Standard published
Safety rules for the construction and installations of lifts - Particular applications for passenger and goods passenger lifts - Part 77: Lifts subject to seismic conditions
60.60 Standard published
Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)
60.60 Standard published
Arc welding equipment - Part 1: Welding power sources
60.60 Standard published
Gas cylinders - Composite cylinders and tubes - Periodic inspection and testing (ISO 11623:2023)
60.60 Standard published
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2022)
60.60 Standard published
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2022)
60.60 Standard published
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2022)
60.60 Standard published
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit (ISO 11806-2:2022, Corrected version 2022-04)
60.60 Standard published
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 1: General requirements (ISO 12643-1:2023)
60.60 Standard published
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems (ISO 12643-2:2023)
60.60 Standard published
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems (ISO 12643-3:2023)
60.60 Standard published
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems (ISO 12643-4:2023)
60.60 Standard published
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 5: Manually-fed stand-alone platen presses (ISO 12643-5:2023)
60.60 Standard published
Industrial furnaces and associated processing equipment - Safety - Part 2: Combustion and fuel handling systems (ISO 13577-2:2023)
60.60 Standard published
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2023)
60.60 Standard published
Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
30.98 Project deleted
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test
30.98 Project deleted
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding
30.98 Project deleted
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
10.99 New project approved
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys
30.98 Project deleted
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings
30.98 Project deleted
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys
30.98 Project deleted
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
30.98 Project deleted
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding
10.99 New project approved
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints
30.98 Project deleted
Machine tools - Safety - Stationary grinding machines - Amendment 1 (ISO 16089:2015/DAM 1:2020)
40.98 Project deleted
Machine tools safety - Machining centres, milling machines, transfer machines - Part 1: Safety requirements (ISO 16090-1:2022, Corrected version 2023-10)
60.60 Standard published
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 5: Aerial spray systems (ISO 16119-5:2023)
60.60 Standard published
Agricultural and forestry machines - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers
30.98 Project deleted
Earth-moving machinery - Functional safety - Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system (ISO 19014-2:2022)
60.60 Standard published
Machinery for forestry - Winches - Part 2: Traction aid winches (ISO 19472-2:2022)
60.60 Standard published
Safety requirements for wetlaid-nonwoven machinery (ISO 22291:2022)
60.60 Standard published
Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022)
60.60 Standard published
Plastics and rubber machines - Clamping systems - Part 1: Safety requirements for magnetic clamping systems (ISO 23582-1:2023)
60.60 Standard published
Machine tools - Safety - Electrical discharge machines (ISO 28881:2022)
60.60 Standard published
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume - Amendment 1 (ISO 3164:2013/Amd 1:2024)
60.60 Standard published
Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO 3691-2:2023)
60.60 Standard published
Industrial trucks - Safety requirements and verification - Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads - Amendment 1 (ISO 3691 3:2016/Amd 1:2023)
60.60 Standard published
Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems - Amendment 1
30.98 Project deleted
Safety devices for protection against excessive pressure - Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow (ISO 4126-10:2024)
60.60 Standard published
Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
30.98 Project deleted
Agricultural machinery - Safety - Part 17: Root crop harvesters (ISO 4254-17:2022)
60.60 Standard published
Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters - Amendment 1 (ISO 4254-7:2017/DAM 1:2022)
45.99 Dispatch of FV draft to CCMC
Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise (ISO 8528-10:2022)
60.60 Standard published
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys
10.99 New project approved
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys
10.99 New project approved
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys
10.99 New project approved
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys
10.99 New project approved
Additive manufacturing - Test artefacts - Geometric capability assessment of additive manufacturing systems (ISO/ASTM 52902:2023)
60.60 Standard published
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
45.98 End of interruption of work - abandoned
Builders hoists for persons and materials with vertically guided cages
50.20 Proof sent to secretariat or FDIS ballot initiated: 8 weeks
Machinery for supply and circulation of liquid coating materials - Safety requirements
45.99 Dispatch of FV draft to CCMC
Cranes - General design - Part 3-1: Limit states and proof competence of steel structure
45.99 Dispatch of FV draft to CCMC
Cranes - General design - Part 3-8: Limit states and proof competence of machinery - Shafts
45.99 Dispatch of FV draft to CCMC
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
45.99 Dispatch of FV draft to CCMC
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory
60.55 Ratification completed (DOR)
Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
45.99 Dispatch of FV draft to CCMC
Pasta processing plant - Dryers and coolers - Safety and hygiene requirements
50.98 Project deleted
Pasta processing plant - Pasta presses - Safety and hygiene requirements
50.98 Project deleted
Pasta processing plant - Spreader, stripping and cutting machine, stick return conveyor - Safety and hygiene requirements
50.98 Project deleted
Unfired pressure vessels - Part 11: Additional requirements for pressure vessels of titanium and titanium alloys
45.99 Dispatch of FV draft to CCMC
Metallic industrial piping - Part 9: Additional requirements for nickel and nickel alloys piping
45.99 Dispatch of FV draft to CCMC
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
45.99 Dispatch of FV draft to CCMC
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
45.99 Dispatch of FV draft to CCMC
LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels
45.99 Dispatch of FV draft to CCMC
Cranes - Power driven winches and hoists - Part 1: Power driven winches
50.98 Project deleted
LPG equipment and accessories - Equipping of overground and underground LPG vessels
45.99 Dispatch of FV draft to CCMC
Food processing machinery - Food depositors - Safety and hygiene requirements
45.99 Dispatch of FV draft to CCMC
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
50.20 Proof sent to secretariat or FDIS ballot initiated: 8 weeks
Industrial trucks - Safety requirements and verification - Part 2: Supplementary requirements for self-propelled variable-reach trucks
40.98 Project deleted
Industrial trucks - Safety requirements and verification - Part 3 Supplementary requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads (additional requirements to EN 16307-1)
40.98 Project deleted
Agricultural and forestry machinery - Mobile yarders for timber logging - Safety
40.98 Project deleted
Food processing machinery - Soft ice cream machines - Safety and hygiene requirements
50.98 Project deleted
Food processing machinery - Combined machines and batch freezers - Safety and hygiene requirements
50.98 Project deleted
Food processing machinery - Pasteurizers, vats and cream cookerss - Safety and hygiene requirements
50.98 Project deleted
Food processing machinery - Cream whippers - Safety and hygiene requirements
50.98 Project deleted
Equipments for slaughterhouses - Slaughtering traps for bovine animals - Safety and cleaning requirements
45.99 Dispatch of FV draft to CCMC
Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements
45.99 Dispatch of FV draft to CCMC
Application equipment for coating materials - Safety requirements
45.99 Dispatch of FV draft to CCMC
Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
60.55 Ratification completed (DOR)
Simple unfired pressure vessels designed to contain air or nitrogen - Part 2: Pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers
60.55 Ratification completed (DOR)
Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
60.55 Ratification completed (DOR)
Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
60.55 Ratification completed (DOR)
Safety of packaging machines - Part 2: Packaging machines for pre-formed rigid containers
45.99 Dispatch of FV draft to CCMC
Safety of packaging machines - Part 4: Palletizers and depalletizers and associated equipment
45.99 Dispatch of FV draft to CCMC
Safety of packaging machines - Part 7: Cartoning and case packing machines
45.99 Dispatch of FV draft to CCMC
Safety of packaging machines - Part 8: Strapping machines
45.99 Dispatch of FV draft to CCMC
Rotating electrical machines - Part 1: Rating and performance
50.98 Project deleted
Rotating electrical machines - Part 1: Rating and performance
30.98 Project deleted
Pressure equipment - Part 7: Safety systems for unfired pressure equipment
45.99 Dispatch of FV draft to CCMC
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
45.99 Dispatch of FV draft to CCMC
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
45.99 Dispatch of FV draft to CCMC
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 44: Lifting appliances in wind turbines
50.20 Proof sent to secretariat or FDIS ballot initiated: 8 weeks
Rotating electrical machines - Part 11: Thermal protection
50.60 Close of voting. Proof returned by secretariat
Rotating electrical machines - Part 1: Rating and performance
50.60 Close of voting. Proof returned by secretariat
Rotating electrical machines - Part 9: Noise limits
50.60 Close of voting. Proof returned by secretariat
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
50.60 Close of voting. Proof returned by secretariat
Safety of machinery - Positioning of safeguards with respect to the approach of the human body (ISO/FDIS 13855:2024)
50.20 Proof sent to secretariat or FDIS ballot initiated: 8 weeks
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO/FDIS 14119:2024)
50.20 Proof sent to secretariat or FDIS ballot initiated: 8 weeks
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 5: Aerial spray systems (ISO/FDIS 16119-5:2018)
50.98 Project deleted
Woodworking machines - Safety - Part 5: Dimension saws (ISO/FDIS 19085-5:2024)
50.20 Proof sent to secretariat or FDIS ballot initiated: 8 weeks
Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines (toupie) (ISO/FDIS 19085-6:2023)
60.55 Ratification completed (DOR)
Cryogenic vessels - Valves for cryogenic service (ISO/FDIS 21011:2023)
50.60 Close of voting. Proof returned by secretariat
Cryogenic vessels - Hoses (ISO/FDIS 21012:2024)
50.60 Close of voting. Proof returned by secretariat
Foundry machinery - Safety requirements for high pressure die casting machines (ISO/FDIS 23063:2023)
45.99 Dispatch of FV draft to CCMC
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 6: Specific requirements for mobile machinery
40.20 DIS ballot initiated: 12 weeks
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
45.99 Dispatch of FV draft to CCMC
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
40.60 Close of voting
Machinery for the supply and circulation of coating materials under pressure - Safety requirements
00.98 Proposal for new project abandoned
Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
40.98 Project deleted
Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
40.60 Close of voting
Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts
30.98 Project deleted
Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler
45.97 End of interruption of work - split/merged
Cranes - General design - Part 3-8: Limit states and proof competence of machinery - Shafts
40.98 Project deleted
GRP tanks and vessels for use above ground - Part 3: Design and workmanship
40.60 Close of voting
Unfired pressure vessels - Part 12: Additional requirements for pressure vessels of copper and copper alloys
40.60 Close of voting
Unfired pressure vessels - Part 14: Additional requirements for pressure equipment and pressure components fabricated with additive manufacturing method
30.98 Project deleted
Unfired pressure vessels - Part 5: Inspection and testing
40.97 End of interruption of work - split/merged
Automotive LPG filling system - Part 1: Dimensions and test requirements for the connector
40.98 Project deleted
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
40.98 Project deleted
Cranes - Offshore cranes - Part 1: General purpose offshore cranes
30.98 Project deleted
Food processing machinery - Bread slicers -Part 1: Safety and hygiene requirements for professionally operated bread slicers
30.98 Project deleted
Food processing machinery - Bread slicers - Part 2: Safety and hygiene requirements for self-service bread slicers
40.60 Close of voting
Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements
40.60 Close of voting
Industrial valves - Requirements and testing for metallic valves as pressure accessories
45.99 Dispatch of FV draft to CCMC
Food processing machinery - Tenderizing machines - Safety and hygiene requirements
40.60 Close of voting
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges
40.60 Close of voting
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 3: Copper alloy and flanges
45.99 Dispatch of FV draft to CCMC
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 4: Aluminium alloy flanges
40.60 Close of voting
Safety of packaging machines - Part 3: Form, fill and seal machines
30.97 End of interruption of work - split/merged
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
00.98 Proposal for new project abandoned
Continuous handling equipment and systems - Safety and EMC requirements for belt conveyors for bulk materials
30.98 Project deleted
Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
30.98 Project deleted
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods lifts in existing buildings
40.98 Project deleted
Safety rules for the construction and installation of lifts - Particular applications for passengers and goods passenger lifts - Part 76: Evacuation of persons with disabilities using lifts
40.98 Project deleted
Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 76: Evacuation of persons with disabilities using lifts
40.60 Close of voting
Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO/DIS 11102-1:2020)
40.98 Project deleted
Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO/DIS 11148-13)
40.60 Close of voting
Safety of machinery - Integration of machinery into a system - Basic requirements (ISO/DIS 11161:2023)
40.98 Project deleted
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems (ISO/DIS 12643-3:2014)
40.98 Project deleted
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems (ISO/DIS 12643-4:2014)
40.98 Project deleted
Brazing - Qualification test of brazers and brazing operators (ISO/DIS 13585:2020)
50.98 Project deleted
Brazing - Qualification test of brazers and brazing operators
30.98 Project deleted
Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria - Part 1: General EMC requirements (ISO/DIS 14982-1:2021)
45.99 Dispatch of FV draft to CCMC
Agricultural and forestry machinery - Electromagnetic compatibility - Part 2: Additional EMC requirements for functional safety (ISO/DIS 14982-2:2021)
45.99 Dispatch of FV draft to CCMC
Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 1: Machine design principles and vocabulary (ISO/DIS 18497-1:2022)
45.99 Dispatch of FV draft to CCMC
Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 2: Design principles for obstacle protection systems (ISO/DIS 18497-2:2022)
45.99 Dispatch of FV draft to CCMC
Mobile road construction machinery - Safety - Part 1: Common requirements (ISO/DIS 20500-1:2020)
45.99 Dispatch of FV draft to CCMC
Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines (ISO/DIS 20500-2:2020)
45.99 Dispatch of FV draft to CCMC
Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines (ISO/DIS 20500-3:2020)
45.99 Dispatch of FV draft to CCMC
Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines
30.98 Project deleted
Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines (ISO/DIS 20500-4:2020)
45.99 Dispatch of FV draft to CCMC
Mobile road construction machinery - Safety - Part 5: Mobile Specific requirements for paver-finishers (ISO/DIS 20500-5:2020)
45.99 Dispatch of FV draft to CCMC
Mobile road construction machinery - Safety - Part 6: Specific requirements for mobile feeders (ISO/DIS 20500-6:2020)
45.99 Dispatch of FV draft to CCMC
Mobile road construction machinery - Safety - Part 7: Specific requirements for slipform paver and texture curing machines (ISO/DIS 20500-7:2020)
45.99 Dispatch of FV draft to CCMC
Plastics and rubber machines -- Safety requirements for extrusion machines for plastics
30.98 Project deleted
Safety of packaging machinery -- Part 1: General requirements
10.99 New project approved
Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation (ISO/DIS 24664:2021)
45.99 Dispatch of FV draft to CCMC
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO/DIS 3744:2023)
45.99 Dispatch of FV draft to CCMC
Agricultural machinery - Robotic feed systems - Safety (ISO/DIS 3991:2023)
45.99 Dispatch of FV draft to CCMC
Agricultural machinery - Safety - Part 18: Loader wagons and forage transport wagons (ISO/DIS 4254-18:2019)
45.98 End of interruption of work - abandoned
Agricultural machinery - Safety - Part 19: Feed mixing machines (ISO/DIS 4254-19:2023)
40.98 Project deleted
Agricultural machinery - Safety - Part 20: Grape, olives and coffee harvesters (ISO/DIS 4254-20:2022)
45.99 Dispatch of FV draft to CCMC
Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel
30.98 Project deleted
Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO/DIS 6683:2022)
45.99 Dispatch of FV draft to CCMC
Additive manufacturing -- Test method for determination of particle emission rates from desktop 3D printer-Material extrusion
30.98 Project deleted