Main menu
0
0

EN 267:2009

Automatic forced draught burners for liquid fuels

Jan 30, 2010

General information

99.60 Withdrawal effective   Aug 24, 2011

CEN

CEN/TC 47 Atomizing oil burners and their components - Function - Safety - Testing

European Norm

27.060.10   Liquid and solid fuel burners

Buying

Withdrawn

Preview

Language in which you want to receive the document.

Scope

This European Standard specifies the terminology, the general requirements for the construction and operation of automatic forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners.
This European Standard applies to automatic forced draught oil burners supplied with:
 a fuel having a viscosity at the burner inlet of 1,6 mm²/s (cSt) up to 6 mm²/s (cSt) at 20 °C; and
 higher boiling petroleum based first raffinates (viscosity greater than 6 mm2/s), that require preheating for proper atomisation.
This European Standard is applicable to:
 single burners fitted to a single combustion chamber;
 single burners fitted to an appliance with additional requirements, then the relevant standard of this appliance shall be taken into account;
 single-fuel and dual-fuel burners when operating on oil only;
 the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, in which case the requirements of EN 676 will also apply in respect of the gaseous fuel function.
This European Standard deals with all significant machine hazards, hazardous situations and events relevant to burners, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Annex J.
This European Standard also deals with the additional requirements for the burners in the scope with pressurised parts and/or firing pressurised bodies, see Annex K.
This European Standard specifies the requirements to be met by the manufacturer to ensure the safety during commissioning, start-up, operation, shut-down and maintenance.
This European Standard does not deal with hazards due to specific applications.
This European Standard is not applicable to automatic forced draught oil burners which are manufactured before the date of its publication as European Standard.

Related directives

Directives related to this standards.

97/23/EC

Pressure equipment

Harmonized
98/37/EC

Machinery

Harmonized
2006/42/EC

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

Harmonized

Life cycle

PREVIOUSLY

Replaces
EN 267:1999

NOW


EN 267:2009
99.60 Withdrawal effective
Aug 24, 2011