Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
90.93 Standard confirmed
Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature
90.20 Standard under periodical review
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
90.93 Standard confirmed
Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines
90.93 Standard confirmed
Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models
90.93 Standard confirmed
Surfaces for sports areas - Test method for the determination of tensile properties of synthetic sports surfaces
60.60 Standard published
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
90.93 Standard confirmed
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
90.60 Close of review
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
60.60 Standard published
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength
90.93 Standard confirmed
Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens
90.92 Standard to be revised
Bituminous mixtures - Test methods - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test
60.60 Standard published
Footwear - Test methods for outsoles - Tensile strength and elongation
90.60 Close of review
Footwear - Test methods for outsoles - Tensile strength and elongation
60.60 Standard published
Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
60.60 Standard published
Testing of welded joints in thermoplastics semi-finished products - Part 3: Tensile creep test
90.20 Standard under periodical review
Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
90.93 Standard confirmed
Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens
60.60 Standard published
Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test
90.60 Close of review
Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures
90.93 Standard confirmed
Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
90.93 Standard confirmed
Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
90.20 Standard under periodical review
Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
90.92 Standard to be revised
Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
90.92 Standard to be revised
Concrete pavements - Part 6: Test method for the determination of the tensile strength of concrete on cylindrical discs
60.60 Standard published
Surfaces for sports areas - Determination of tensile strength of synthetic yarns
90.92 Standard to be revised
Textiles - Monofilaments - Determination of tensile properties
90.93 Standard confirmed
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
90.93 Standard confirmed
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
60.60 Standard published
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
90.93 Standard confirmed
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
60.60 Standard published
Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91)
90.20 Standard under periodical review
Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
90.93 Standard confirmed
Adhesives - Determination of tensile lap-shear strength of bonded assemblies
90.93 Standard confirmed
Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
90.93 Standard confirmed
Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers
90.93 Standard confirmed
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars
90.93 Standard confirmed
Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified)
90.93 Standard confirmed
Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
90.60 Close of review
Rubber or plastics-coated fabrics - Mechanical test methods under biaxial stress states - Part 1: Tensile stiffness properties
90.60 Close of review
Continuous-fibre-reinforced plastic composites - Pultruded unidirectional rods - Determination of tensile properties in parallel to the fibre direction
90.93 Standard confirmed
Geosynthetics - Determination of tensile properties of Polymeric Geosynthetic Barriers
60.60 Standard published
Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
90.93 Standard confirmed
Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature
60.60 Standard published
Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature
60.60 Standard published
Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints
90.92 Standard to be revised
Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys
60.60 Standard published
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test
60.60 Standard published
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction
60.60 Standard published
Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection)
90.93 Standard confirmed
Aerospace series - Elements of electrical and optical connection - Test methods - Part 709: Electrical elements - Tensile strength of couplers
90.93 Standard confirmed
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction
60.60 Standard published
Aerospace series - Glass fibre reinforced plastics - Tensile test
60.60 Standard published
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
60.60 Standard published
Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
60.60 Standard published
Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board
90.93 Standard confirmed
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
60.60 Standard published
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material
90.93 Standard confirmed
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile strength for short length of optical fibres
60.60 Standard published
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength
60.60 Standard published
Aerospace series - Cable ties for harnesses - Test methods - Part 304: Loop tensile strength at maximum working temperature
90.93 Standard confirmed
Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile strength
90.93 Standard confirmed
Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip
60.60 Standard published
Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners
60.60 Standard published
Aerospace series - Sensor based clamp load determination / high tensile bolts - Technical specification
60.60 Standard published
Communication cables - Specifications for test methods - Part 3-16: Mechanical test methods - Cable tensile performance
90.93 Standard confirmed
Communication cables - Specifications for test methods - Part 3-2: Mechanical test methods - Tensile strength and elongation for conductor
90.93 Standard confirmed
Communication cables - Specifications for test methods - Part 3-4: Mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath
90.93 Standard confirmed
Steel strip sheaths for prestressing tendons - Test methods - Part 5: Determination of tensile load resistance
90.93 Standard confirmed
Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (± 45° tensile test)
60.60 Standard published
Aerospace series - Fibre reinforced plastics - Test method - Determination of notched and unnotched tensile strength
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
60.60 Standard published
Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature
60.60 Standard published
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode
60.60 Standard published
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode
60.60 Standard published
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
60.60 Standard published
Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
60.60 Standard published
Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors
60.60 Standard published
Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile testing
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property measurement of thin films
60.60 Standard published
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties
90.20 Standard under periodical review
Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units
90.93 Standard confirmed
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
90.93 Standard confirmed
Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
90.93 Standard confirmed
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 14: Determination of tensile properties of coating films
60.60 Standard published
Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength
60.60 Standard published
Optical fibre cables - Part 1-101: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Tensile, method E1
60.60 Standard published
Optical fibre cables - Part 1-311: Generic specification - Basic optical cable test procedures - Cable element test methods - Tensile strength and elongation test for cable elements, Method G11A
60.60 Standard published
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
60.60 Standard published
Superconductivity - Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires
60.60 Standard published
Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent (ISO 10275:2020)
60.60 Standard published
Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008)
60.60 Standard published
Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005)
60.60 Standard published
Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004)
60.60 Standard published
Footwear - Test method for the characterization of elastic materials - Tensile performance (ISO 10765:2010)
60.60 Standard published
Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines and calculation of perforation efficiency (ISO 12625-12:2023)
60.60 Standard published
Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2022)
60.60 Standard published
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2024)
60.60 Standard published
Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints (ISO 12996:2013)
60.60 Standard published
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
60.60 Standard published
Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:2024)
60.60 Standard published
Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01)
60.60 Standard published
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
60.60 Standard published
Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014)
60.60 Standard published
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:2014)
60.60 Standard published
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014)
60.60 Standard published
Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016)
60.60 Standard published
Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds (ISO 14273:2016)
60.60 Standard published
Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds (ISO 14323:2015)
60.60 Standard published
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties (ISO 14574:2013)
60.60 Standard published
Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017)
60.60 Standard published
Footwear - Test methods for uppers - Tensile strength and elongation (ISO 17706:2003)
60.60 Standard published
Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008)
60.60 Standard published
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (ISO 1924-2:2008)
90.93 Standard confirmed
Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature (ISO 19630:2017)
60.60 Standard published
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of tensile properties of tubes (ISO 20323:2018)
60.60 Standard published
Light conveyor belts - Determination of the maximum tensile strength (ISO 21180:2013)
60.60 Standard published
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of hoop tensile properties of tubes (ISO 21971:2019)
60.60 Standard published
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 2: Constant tensile load method (ISO 22088-2:2006)
60.60 Standard published
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method (ISO 22088-5:2006)
60.60 Standard published
Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature (ISO 22459:2024)
60.60 Standard published
Paints and varnishes - Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage (ISO 22970:2019)
60.60 Standard published
Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2018)
60.60 Standard published
Metallic materials - Tensile testing at high strain rates - Part 2: Servo-hydraulic and other test systems (ISO 26203-2:2011)
90.93 Standard confirmed
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2023)
60.60 Standard published
Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method (ISO 283:2023)
60.60 Standard published
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
60.60 Standard published
Thermal insulating products for building applications - Determination of tensile strength parallel to faces (ISO 29766:2022)
60.60 Standard published
Leather - Physical and mechanical tests - Determination of tensile strength and percentage elongation (ISO 3376:2020)
60.60 Standard published
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
60.60 Standard published
Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2022)
60.60 Standard published
Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2019)
60.60 Standard published
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019)
60.60 Standard published
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
60.60 Standard published
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018)
60.60 Standard published
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023)
60.60 Standard published
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021)
60.60 Standard published
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
60.60 Standard published
Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) (ISO 6259-2:2020)
60.60 Standard published
Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015)
60.60 Standard published
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
60.60 Standard published
Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018)
60.60 Standard published
Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015)
60.60 Standard published
Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:2022)
60.60 Standard published
Plastics - Determination of tensile-impact strength (ISO 8256:2023)
60.60 Standard published
Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005)
60.60 Standard published
Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005)
60.60 Standard published
Metallic materials - Tube - Ring tensile test (ISO 8496:2013)
60.60 Standard published
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2017)
60.60 Standard published
Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2015)
60.60 Standard published
Nonwovens - Test methods - Part 18: Determination of tensile strength and elongation at break using the grab tensile test (ISO 9073-18:2023, Corrected version 2024-05)
60.60 Standard published
Nonwovens - Test methods - Part 3: Determination of tensile strength and elongation at break using the strip method (ISO 9073-3:2023)
60.60 Standard published
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
60.60 Standard published
Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993)
90.93 Standard confirmed
Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa (ISO 9809-1:2019)
60.60 Standard published
Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2019)
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
60.60 Standard published
Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
60.60 Standard published
Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength
60.60 Standard published
Optical fibre cables - Part 1-101: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Tensile, method E1
60.60 Standard published
Optical fibre cables - Part 1-311: Generic specification - Basic optical cable test procedures - Cable element test methods - Tensile strength and elongation test for cable elements, Method G11A
60.60 Standard published
Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature
60.60 Standard published
Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals
60.60 Standard published
Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode
60.60 Standard published
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode
60.60 Standard published
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
60.60 Standard published
Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
60.60 Standard published
Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors
60.60 Standard published
Superconductivity - Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires
60.60 Standard published
Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 3: Thin film standard test piece for tensile testing
60.60 Standard published
Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property measurement of thin films
60.60 Standard published
Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent
60.60 Standard published
Geosynthetics — Tensile test for joints/seams by wide-width strip method
90.93 Standard confirmed
Glass — Determination of stress-optical coefficient — Part 1: Tensile test
90.20 Standard under periodical review
Building construction — Sealants —- Determination of tensile properties of sealants at maintained extension after immersion in water
90.93 Standard confirmed
Carbon fibre — Determination of tensile properties of resin-impregnated yarn
90.93 Standard confirmed
Footwear — Test method for the characterization of elastic materials — Tensile performance
90.93 Standard confirmed
Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends
90.93 Standard confirmed
Carbon fibre — Determination of the tensile properties of single-filament specimens
90.93 Standard confirmed
Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines and calculation of perforation efficiency
60.60 Standard published
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
60.60 Standard published
Tissue paper and tissue products — Part 5: Determination of wet tensile strength
60.60 Standard published
Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for tensile shear testing of single joints
90.93 Standard confirmed
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 6: Determination of ultimate tensile stress parallel to grain
90.93 Standard confirmed
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 7: Determination of ultimate tensile stress perpendicular to grain
90.93 Standard confirmed
Textile — Biaxial tensile properties of woven fabric — Determination of elasticity properties using a cruciform test piece
60.60 Standard published
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics spirally-formed structured-wall pipes — Determination of the tensile strength of a seam
90.93 Standard confirmed
Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour
60.60 Standard published
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
90.92 Standard to be revised
Plastics pipes and fittings — Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
90.93 Standard confirmed
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
90.93 Standard confirmed
Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method
90.93 Standard confirmed
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method
90.20 Standard under periodical review
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
90.92 Standard to be revised
Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
90.93 Standard confirmed
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
90.93 Standard confirmed
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint — Amendment 1
60.60 Standard published
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
90.93 Standard confirmed
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
90.93 Standard confirmed
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
90.93 Standard confirmed
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties
90.92 Standard to be revised
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
90.93 Standard confirmed
Thermal spraying — Determination of tensile adhesive strength
90.93 Standard confirmed
Pulps — Determination of zero-span tensile strength, wet or dry
90.93 Standard confirmed
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for tensile strength of monolithic ceramics at room temperature
90.93 Standard confirmed
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties
90.92 Standard to be revised
Paper and board — Determination of z-directional tensile strength
90.93 Standard confirmed
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
90.20 Standard under periodical review
Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece
60.60 Standard published
Wood-based panels — Determination of tensile strength perpendicular to the plane of the panel
90.93 Standard confirmed
Footwear — Test methods for uppers — Tensile strength and elongation
90.93 Standard confirmed
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
90.93 Standard confirmed
Plastics — Determination of tensile properties at high strain rates
90.93 Standard confirmed
Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables — Specifications
90.92 Standard to be revised
Adhesives — Wood adhesives for non-structural applications — Determination of tensile shear strength of lap joints
90.93 Standard confirmed
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)
90.92 Standard to be revised
Paper and board — Determination of tensile properties — Part 3: Constant rate of elongation method (100 mm/min)
90.93 Standard confirmed
Rigid cellular plastics — Determination of tensile properties
90.93 Standard confirmed
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of stress-rupture time diagram under constant tensile loading
90.93 Standard confirmed
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for reinforcements — Determination of tensile properties of filaments at ambient temperature
90.92 Standard to be revised
Method for evaluation of tensile properties of metallic superplastic materials
90.93 Standard confirmed
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties of tubes
90.93 Standard confirmed
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for interfacial tensile and shear fatigue properties of ceramic joining loaded in constant amplitude at room temperature
90.93 Standard confirmed
Light conveyor belts — Determination of the maximum tensile strength
90.92 Standard to be revised
Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of hoop tensile properties of tubes
90.20 Standard under periodical review
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 2: Constant tensile load method
90.93 Standard confirmed
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 5: Constant tensile deformation method
90.93 Standard confirmed
Plastics — Validation of force-time curves obtained from high-speed tensile tests
60.60 Standard published
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for tensile creep of monolithic ceramics
90.93 Standard confirmed
Fine ceramics (advanced ceramics, advanced technical ceramics) — Reinforcement of ceramic composites — Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
60.60 Standard published
Footwear — Test methods for outsoles — Tensile strength and elongation
90.93 Standard confirmed
Composites and reinforcements fibres — Carbon fibre reinforced plastics(CFRPs) and metal assemblies — Determination of the tensile lap-shear strength
60.60 Standard published
Composites and reinforcements fibres — Carbon fibre reinforced plastics(CFRPs) and metal assemblies — Determination of the tensile lap-shear strength — Amendment 1: Precision data
60.60 Standard published
Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
90.93 Standard confirmed
Paints and varnishes — Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage
90.60 Close of review
Thermoplastics pipes for the conveyance of fluids — Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
90.93 Standard confirmed
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of tests for reinforcements — Determination of the tensile properties of resin-impregnated yarns
90.92 Standard to be revised
Building and civil engineering sealants — Determination of the degree of cure — Part 1: Build-up of tensile properties in dumbbell-shaped specimens
60.60 Standard published
Building and civil engineering sealants — Determination of the degree of cure — Part 2: Build-up of tensile and adhesion properties in test joint specimens
60.60 Standard published
Textiles — Biaxial tensile properties of woven fabric — Determination of maximum force and elongation at maximum force using the grab method
60.60 Standard published
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
90.92 Standard to be revised
Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems
90.93 Standard confirmed
Sintered metal materials, excluding hardmetals — Tensile test pieces
60.60 Standard published
Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method
60.60 Standard published
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
90.93 Standard confirmed
Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces
90.60 Close of review
Thermal insulating products for building applications — Determination of tensile strength parallel to faces
60.60 Standard published
Thermal insulation products for building applications — Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
90.93 Standard confirmed
Textile glass — Mats — Determination of tensile breaking force
90.93 Standard confirmed
Leather — Physical and mechanical tests — Determination of tensile strength and percentage elongation
60.60 Standard published
Adhesives — Wood adhesives — Determination of tensile strength of lap joints at elevated temperature (WATT '91)
60.60 Standard published
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
90.92 Standard to be revised
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
60.60 Standard published
Paper and board — Determination of tensile strength after immersion in water
90.93 Standard confirmed
Destructive tests on welds in metallic materials — Transverse tensile test
60.60 Standard published
Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and dynamic strengths
90.93 Standard confirmed
Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
90.93 Standard confirmed
Textile glass — Woven fabric — Determination of tensile breaking force and elongation at break by the strip method
90.93 Standard confirmed
Continuous mechanical handling equipment — Belt conveyors with carrying idlers — Calculation of operating power and tensile forces
90.60 Close of review
Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints
90.93 Standard confirmed
Plastics — Determination of tensile properties — Part 1: General principles
90.20 Standard under periodical review
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
90.92 Standard to be revised
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
90.93 Standard confirmed
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
60.60 Standard published
Plastics — Determination of tensile properties — Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
60.60 Standard published
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining tensile and shear creep of ceramic adhesive
60.60 Standard published
Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
90.60 Close of review
Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification — Amendment 1
60.60 Standard published
High-tensile steel chains (round link) for chain conveyors and coal ploughs
90.93 Standard confirmed
Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading
90.93 Standard confirmed
Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
90.93 Standard confirmed
Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)
60.60 Standard published
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
90.93 Standard confirmed
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
90.93 Standard confirmed
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method
90.93 Standard confirmed
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
90.20 Standard under periodical review
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
90.92 Standard to be revised
Metallic materials — Tensile testing — Part 3: Method of test at low temperature
90.93 Standard confirmed
Metallic materials — Tensile testing — Part 4: Method of test in liquid helium
90.93 Standard confirmed
Metallic materials — Tensile testing — Method for evaluating the susceptibility of materials to the effects of high-pressure gas within hollow test pieces
60.60 Standard published
Steel cord conveyor belts — Longitudinal traction test — Part 2: Measurement of tensile strength
60.60 Standard published
Building construction — Sealants — Determination of tensile properties (Extension to break)
90.93 Standard confirmed
Building construction — Sealants — Determination of tensile properties at maintained extension
90.93 Standard confirmed
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
60.60 Standard published
Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
60.60 Standard published
Plastics — Determination of creep behaviour — Part 1: Tensile creep
90.93 Standard confirmed
Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints
90.93 Standard confirmed
Nonwovens — Test methods — Part 18: Determination of tensile strength and elongation at break using the grab tensile test
60.60 Standard published
Nonwovens — Test methods — Part 3: Determination of tensile strength and elongation at break using the strip method
60.60 Standard published
Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings
90.93 Standard confirmed
Adhesives — Test methods for fatigue properties of structural adhesives in tensile shear
90.93 Standard confirmed
Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa
90.20 Standard under periodical review
Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa
90.20 Standard under periodical review
Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing
60.60 Standard published
Metallic materials — Measurement of mechanical properties by an instrumented indentation test — Indentation tensile properties
90.93 Standard confirmed
Dentistry — Test methods for tensile bond strength to tooth structure
60.60 Standard published
Test methods for transparent materials for aircraft glazing - Part 17: Determination of tensile properties
90.93 Standard confirmed
