Agri

Related standards or drafts

Characterization of sludges - Good practice for sludge utilisation in agriculture

60.60 Standard published

CEN/TC 308

Plastics - Biodegradable thermoplastic mulch films for use in agriculture and horticulture - Guide for the quantification of alteration of films

60.60 Standard published

CEN/TC 249

Intelligent transport systems - eSafety - Part 4: eCall for UNECE Category T, R, S agricultural/forestry vehicles

90.93 Standard confirmed

CEN/TC 278

Methodology to quantify the global agricultural crop footprint including soil impacts

60.60 Standard published

CEN/WS CROP

Guidelines for characterization of extracts for the recycling/upcycling of organic agrifood wastes

60.60 Standard published

CEN/WS AGRO2CIRCULAR

Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes

90.60 Close of review

CEN/TC 459/SC 6

Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination

90.93 Standard confirmed

CEN/TC 233

Agricultural machinery - Front loaders - Safety

90.93 Standard confirmed

CEN/TC 144

Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

90.60 Close of review

CEN/TC 144

Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety

60.60 Standard published

CEN/TC 144

Agricultural machinery - Manure spreaders - Environmental protection - Requirements and test methods

90.93 Standard confirmed

CEN/TC 144

Vinegar - Product made from liquids of agricultural origin - Definitions, requirements, marking

90.20 Standard under periodical review

CEN/BT

Vinegar - Product made from liquids of agricultural origin - Definitions, requirements, marking

60.60 Standard published

CEN/BT

Acetic acid food grade - Product made from materials of non-agricultural origin - Definitions, requirements, marking

90.20 Standard under periodical review

CEN/BT

Acetic acid food grade - Product made from materials of non-agricultural origin - Definitions, requirements, marking

60.60 Standard published

CEN/BT

Plastics - Thermoplastic covering films for use in agriculture and horticulture

90.92 Standard to be revised

CEN/TC 249

Plastics - Thermoplastic silage films and tubes for use in agriculture

60.60 Standard published

CEN/TC 249

Agricultural machinery - Slurry tankers and spreading devices - Environmental protection - Requirements and test methods for the spreading precision

90.93 Standard confirmed

CEN/TC 144

Agricultural and forestry machinery - Inter-row mowing units - Safety

90.93 Standard confirmed

CEN/TC 144

Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture

60.60 Standard published

CEN/TC 249

Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 1: Requirements

90.93 Standard confirmed

CEN/TC 144

Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods

90.93 Standard confirmed

CEN/TC 144

Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods

60.60 Standard published

CEN/TC 144

Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Part 1: Requirements

90.93 Standard confirmed

CEN/TC 144

Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Part 2: Test methods

90.93 Standard confirmed

CEN/TC 144

Agricultural machinery - Silos stationary unloaders for round silos - Safety

90.60 Close of review

CEN/TC 144

Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use

90.93 Standard confirmed

CEN/TC 197

Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces

90.93 Standard confirmed

CEN/TC 144

Agricultural and forestry tractors - Passenger seat - Requirements and test procedures

90.60 Close of review

CEN/TC 144

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures

90.93 Standard confirmed

CEN/TC 144

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures

90.93 Standard confirmed

CEN/TC 144

Agricultural machinery - Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified)

90.93 Standard confirmed

CEN/TC 144

Agricultural machinery - Backhoes - Safety

90.60 Close of review

CEN/TC 144

Agricultural and forestry machinery - Mobile yarders for timber logging - Safety

60.60 Standard published

CEN/TC 144

Tractors and machinery for agriculture and forestry - Safety - Format for reporting accidents

90.93 Standard confirmed

CEN/TC 144

Agricultural machinery and tractors - Standardized access to repair and maintenance information (RMI) - Requirements

90.93 Standard confirmed

CEN/TC 144

Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety

90.93 Standard confirmed

CEN/TC 144

Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods

90.93 Standard confirmed

CEN/TC 249

Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films

60.60 Standard published

CEN/TC 249

Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique

90.93 Standard confirmed

CEN/TC 249

Agricultural machinery - Self-propelled agricultural and forestry vehicles - Requirements for braking

60.60 Standard published

CEN/TC 144

Agricultural and forestry machinery - Installation of lighting and light signalling devices on mounted implements

60.60 Standard published

CEN/TC 144

Agricultural machinery - Trailers - Safety

90.93 Standard confirmed

CEN/TC 144

Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters

90.93 Standard confirmed

CEN/TC 144

Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters

90.93 Standard confirmed

CEN/TC 144

Agricultural machinery - Manure spreaders - Safety

90.60 Close of review

CEN/TC 144

Agricultural machinery - Safety - Silage loading, mixing and/or chopping and distributing machines

60.60 Standard published

CEN/TC 144

Agricultural machinery - Vine shoot tipping machines - Safety

90.93 Standard confirmed

CEN/TC 144

Agricultural machinery - Slurry tankers - Safety

90.60 Close of review

CEN/TC 144

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety

90.93 Standard confirmed

CEN/TC 144

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety

60.60 Standard published

CEN/TC 144

Agricultural and forestry machinery - Reel machines for irrigation - Safety

90.60 Close of review

CEN/TC 144

Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety

90.60 Close of review

CEN/TC 144

Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution (ISO 11545:2009)

60.60 Standard published

CEN/TC 334

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2022)

60.60 Standard published

CEN/TC 144

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit (ISO 11806-2:2022, Corrected version 2022-04)

60.60 Standard published

CEN/TC 144

Rubber hoses for agricultural spraying (ISO 1401:2016)

60.60 Standard published

CEN/TC 218

Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)

60.60 Standard published

CEN/TC 144

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013)

60.60 Standard published

CEN/TC 144

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03)

60.60 Standard published

CEN/TC 144

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)

60.60 Standard published

CEN/TC 144

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)

60.60 Standard published

CEN/TC 144

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 5: Aerial spray systems (ISO 16119-5:2023)

60.60 Standard published

CEN/TC 144

Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General (ISO 16122-1:2015)

60.60 Standard published

CEN/TC 144

Agricultural and forestry machinery - Inspection of sprayers in use - Part 2: Horizontal boom sprayers (ISO 16122-2:2015)

60.60 Standard published

CEN/TC 144

Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crops (ISO 16122-3:2015)

60.60 Standard published

CEN/TC 144

Agricultural and forestry machines - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers (ISO 16122-4:2015)

60.60 Standard published

CEN/TC 144

Agricultural and forestry machines - Inspection of sprayers in use - Part 5: Aerial spray systems (ISO 16122-5:2020)

60.60 Standard published

CEN/TC 144

Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)

60.60 Standard published

CEN/TC 144

Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO 16231-1:2013)

60.60 Standard published

CEN/TC 144

Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures (ISO 16231-2:2015)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems (ISO 17962:2015)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems - Amendment 1 (ISO 17962:2015/Amd 1:2021)

60.60 Standard published

CEN/TC 144

Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015)

60.60 Standard published

CEN/TC 144

Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 1: Machine design principles and vocabulary (ISO 18497-1:2024)

60.60 Standard published

CEN/TC 144

Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 2: Design principles for obstacle protection systems (ISO 18497-2:2024)

60.60 Standard published

CEN/TC 144

Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 3: Autonomous operating zones (ISO 18497-3:2024)

60.60 Standard published

CEN/TC 144

Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 4: Verification methods and validation principles (ISO 18497-4:2024)

60.60 Standard published

CEN/TC 144

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2018)

60.60 Standard published

CEN/TC 144

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development - Amendment 1 (ISO 25119-1:2018/Amd 1:2020)

60.60 Standard published

CEN/TC 144

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2019)

60.60 Standard published

CEN/TC 144

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2018)

60.60 Standard published

CEN/TC 144

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software - Amendment 1 (ISO 25119-3:2018/Amd 1:2020)

60.60 Standard published

CEN/TC 144

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2018)

60.60 Standard published

CEN/TC 144

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes - Amendment 1 (ISO 25119-4:2018/Amd 1:2020)

60.60 Standard published

CEN/TC 144

Polyolefin agricultural twines (ISO 4167:2006)

60.60 Standard published

CEN/TC 248

Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 11: Pick-up balers - Amendment 1 (ISO 4254-11:2010/Amd 1:2020)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 1: General requirements - Amendment 1 (ISO 4254-1:2013/Amd 1:2021)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012/Amd 1:2017)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 17: Root crop harvesters (ISO 4254-17:2022)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2018)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017, Corrected version 2019-03)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018)

60.60 Standard published

CEN/TC 144

Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018)

60.60 Standard published

CEN/TC 144

Sisal agricultural twines (ISO 5080:1994)

90.93 Standard confirmed

CEN/TC 248

Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995)

60.60 Standard published

CEN/TC 151

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)

60.60 Standard published

CEN/TC 144

Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods (ISO 9261:2004)

60.60 Standard published

CEN/TC 334

Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

60.60 Standard published

CLC/TC 64

Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

60.60 Standard published

CLC/TC 64

Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

60.60 Standard published

CLC/TC 64

Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

60.60 Standard published

CLC/TC 64

Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

60.60 Standard published

TC 64

Agricultural tractors — Hydraulic pressure for implements

60.60 Standard published

ISO/TC 23/SC 4

Agricultural irrigation equipment — Direct-acting pressure-regulating valves

60.60 Standard published

ISO/TC 23/SC 18

Agricultural machinery and tractors — Auto-guidance systems for operator-controlled tractors and self-propelled machines — Safety requirements

60.60 Standard published

ISO/TC 23/SC 19

Agricultural tractors — Requirements for steering

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural tractors — Requirements for steering — Amendment 1

60.60 Standard published

ISO/TC 23/SC 4

Agricultural wheeled tractors — Three-point hitch couplers — Part 1: U-frame coupler

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 2: A-frame coupler

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 3: Link coupler

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 4: Bar coupler

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural tractors and machinery — Coding of remote hydraulic power services and controls

90.92 Standard to be revised

ISO/TC 23/SC 4

Agricultural grain driers — Determination of drying performance — Part 1: General

90.93 Standard confirmed

ISO/TC 23/SC 7

Agricultural grain driers — Determination of drying performance — Part 2: Additional procedures and crop-specific requirements

90.93 Standard confirmed

ISO/TC 23/SC 7

Agricultural irrigation equipment — Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles — Determination of uniformity of water distribution

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural irrigation equipment — Aluminium irrigation tubes

90.93 Standard confirmed

ISO/TC 23/SC 18

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety labels — General principles

60.60 Standard published

ISO/TC 23/SC 14

Agricultural irrigation equipment — Control heads

60.60 Standard published

ISO/TC 23/SC 18

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 10: Task controller and management information system data interchange

90.92 Standard to be revised

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 11: Mobile data element dictionary

90.93 Standard confirmed

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 1: General standard for mobile data communication

90.93 Standard confirmed

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 12: Diagnostics services

90.92 Standard to be revised

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 13: File server

60.60 Standard published

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 14: Sequence control

90.93 Standard confirmed

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 2: Physical layer

90.92 Standard to be revised

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link layer

90.92 Standard to be revised

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 4: Network layer

90.93 Standard confirmed

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 5: Network management

90.60 Close of review

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 6: Virtual terminal

90.92 Standard to be revised

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7: Implement messages application layer

60.60 Standard published

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 8: Power train messages

90.93 Standard confirmed

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 9: Tractor ECU

90.93 Standard confirmed

ISO/TC 23/SC 19

Agricultural tractors and machinery — Tractor-mounted sensor interface — Specifications

90.93 Standard confirmed

ISO/TC 23/SC 19

Agricultural tractor drive wheel tyres — Explanation of rolling circumference index (RCI) and speed radius index (SRI) and method of measuring tyre rolling circumference

90.93 Standard confirmed

ISO/TC 31/SC 5

Agricultural tractor drive wheel tyres — Explanation of rolling circumference index (RCI) and speed radius index (SRI) and method of measuring tyre rolling circumference — Amendment 1

60.60 Standard published

ISO/TC 31/SC 5

Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 1: Machines fitted with an integral combustion engine

60.60 Standard published

ISO/TC 23/SC 17

Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 2: Machines for use with backpack power unit

60.60 Standard published

ISO/TC 23/SC 17

Tractors for agriculture and forestry — Roll-over protective structures on narrow tractors — Part 1: Front-mounted ROPS

60.60 Standard published

ISO/TC 23/SC 2

Tractors for agriculture and forestry — Roll-over protective structures on narrow tractors — Part 2: Rear-mounted ROPS

60.60 Standard published

ISO/TC 23/SC 2

Agricultural trailers and trailed equipment — Drawbar jacks — Part 1: Design safety, test methods and acceptance criteria

60.60 Standard published

ISO/TC 23/SC 3

Agricultural trailers and trailed equipment — Drawbar jacks — Part 2: Application safety, test methods and acceptance criteria

60.60 Standard published

ISO/TC 23/SC 3

Tractors and machinery for agriculture and forestry — Test procedures for positioning and guidance systems in agriculture — Part 1: Dynamic testing of satellite-based positioning devices

90.93 Standard confirmed

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Test procedures for positioning and guidance systems in agriculture — Part 2: Testing of satellite-based auto-guidance systems during straight and level travel

90.93 Standard confirmed

ISO/TC 23/SC 19

Agricultural vehicles — Mechanical hook-type connections on towing vehicles — Test methods and requirements

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural irrigation — Wiring and equipment for electrically driven or controlled irrigation machines

90.20 Standard under periodical review

ISO/TC 23/SC 18

Tractors and machinery for agriculture and forestry — Basic types — Vocabulary

60.60 Standard published

ISO/TC 23/SC 2

Equipment for crop protection — Agricultural sprayers — Determination of the volume of total residual

90.93 Standard confirmed

ISO/TC 23/SC 6

Air-assisted agricultural sprayers — Data sheets — Part 1: Typical layout

90.93 Standard confirmed

ISO/TC 23/SC 6

Air-assisted agricultural sprayers — Data sheets — Part 2: Technical specifications related to components

90.93 Standard confirmed

ISO/TC 23/SC 6

Agricultural irrigation equipment — Water-driven chemical injector pumps

60.60 Standard published

ISO/TC 23/SC 18

Agricultural irrigation equipment — Plastics saddles — Part 1: Polyethylene pressure pipes

90.93 Standard confirmed

ISO/TC 23/SC 18

Rubber hoses for agricultural spraying

90.93 Standard confirmed

ISO/TC 45/SC 1

Agricultural sprayers — Boom steadiness — Test methods

90.60 Close of review

ISO/TC 23/SC 6

Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 1: Vocabulary

90.60 Close of review

ISO/TC 23/SC 2

Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 2: Heating, ventilation and air-conditioning test method and performance

90.60 Close of review

ISO/TC 23/SC 2

Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 3: Determination of effect of solar heating

90.60 Close of review

ISO/TC 23/SC 2

Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 4: Air filter element test method

90.60 Close of review

ISO/TC 23/SC 2

Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 5: Pressurization system test method

90.60 Close of review

ISO/TC 23/SC 2

Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria

90.92 Standard to be revised

ISO/TC 23/SC 2

Agricultural engineering — Electrical and electronic equipment — Testing resistance to environmental conditions

90.20 Standard under periodical review

ISO/TC 23/SC 19

Tractors and self-propelled machinery for agriculture — Operator controls — Actuating forces, displacement, location and method of operation

60.60 Standard published

ISO/TC 23/SC 3

Agricultural equipment — Graphical symbols for pressurized irrigation systems

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural irrigation equipment — Sprinklers — Part 1: Definition of terms and classification

90.60 Close of review

ISO/TC 23/SC 18

Agricultural irrigation equipment — Sprinklers — Part 2: Design and operation requirements

60.60 Standard published

ISO/TC 23/SC 18

Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods

60.60 Standard published

ISO/TC 23/SC 18

Agricultural and forestry machinery — Environmental requirements for sprayers — Part 1: General

90.92 Standard to be revised

ISO/TC 23/SC 6

Agricultural and forestry machinery — Environmental requirements for sprayers — Part 2: Horizontal boom sprayers

90.92 Standard to be revised

ISO/TC 23/SC 6

Agricultural and forestry machinery — Environmental requirements for sprayers — Part 3: Sprayers for bush and tree crops

90.92 Standard to be revised

ISO/TC 23/SC 6

Agricultural and forestry machinery — Environmental requirements for sprayers — Part 4: Fixed and semi-mobile sprayers

90.92 Standard to be revised

ISO/TC 23/SC 6

Agricultural and forestry machinery — Environmental requirements for sprayers — Part 5: Aerial spray systems

60.60 Standard published

ISO/TC 23/SC 6

Agricultural and forestry machinery — Inspection of sprayers in use — Part 1: General

90.92 Standard to be revised

ISO/TC 23/SC 6

Agricultural and forestry machinery — Inspection of sprayers in use — Part 2: Horizontal boom sprayers

90.92 Standard to be revised

ISO/TC 23/SC 6

Agricultural and forestry machinery — Inspection of sprayers in use — Part 3: Sprayers for bush and tree crops

90.92 Standard to be revised

ISO/TC 23/SC 6

Agricultural and forestry machines — Inspection of sprayers in use — Part 4: Fixed and semi-mobile sprayers

90.92 Standard to be revised

ISO/TC 23/SC 6

Agricultural and forestry machines — Inspection of sprayers in use — Part 5: Aerial spray systems

60.60 Standard published

ISO/TC 23/SC 6

Agricultural irrigation equipment — PVC above-ground low-pressure pipe for surface irrigation — Specifications and test methods

90.93 Standard confirmed

ISO/TC 23/SC 18

Tractors and machinery for agriculture and forestry — Installation of lighting, light signalling and marking devices for travel on public roadways

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural machinery and tractors — Safety of higher voltage electrical and electronic components and systems — Part 1: General requirements

90.93 Standard confirmed

ISO/TC 23/SC 19

Self-propelled agricultural machinery — Assessment of stability — Part 1: Principles

90.60 Close of review

ISO/TC 23/SC 3

Self-propelled agricultural machinery — Assessment of stability — Part 2: Determination of static stability and test procedures

90.93 Standard confirmed

ISO/TC 23/SC 3

Agricultural irrigation equipment — Meters for irrigation water

60.60 Standard published

ISO/TC 23/SC 18

Agricultural irrigation equipment — Thermoplastic collapsible hoses for irrigation — Specifications and test methods

60.60 Standard published

ISO/TC 23/SC 18

Molecular biomarker analysis — Vocabulary for molecular biomarker analytical methods in agriculture and food production

60.60 Standard published

ISO/TC 34/SC 16

Manually portable agricultural and forestry machines and powered lawn and garden equipment — Design principles for single-panel product safety labels

90.20 Standard under periodical review

ISO/TC 23/SC 14

Agricultural machinery — Thrown-object test and acceptance criteria — Part 1: Rotary mowers

90.93 Standard confirmed

ISO/TC 23/SC 7

Agricultural machinery — Thrown-object test and acceptance criteria — Part 2: Flail mowers

90.93 Standard confirmed

ISO/TC 23/SC 7

Agricultural machinery — Rotary disc mowers, rotary drum mowers and flail mowers — Test methods and acceptance criteria for protective skirts

90.93 Standard confirmed

ISO/TC 23/SC 7

Stationary equipment for agriculture — Data communications network for livestock farming

90.93 Standard confirmed

ISO/TC 23/SC 19

Agricultural and forestry tractors and implements — Hydraulic power beyond

60.60 Standard published

ISO/TC 23/SC 4

Tractors and machinery for agriculture and forestry — Auxiliary-power-transmission connector for the operator station

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural trailers — Balanced and semi-mounted trailers — Determination of payload, vertical static load and axle load

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural machinery — Equipment for sowing — Minimization of the environmental effects of fan exhaust from pneumatic systems

90.93 Standard confirmed

ISO/TC 23/SC 3

Agricultural machinery — Equipment for sowing — Minimization of the environmental effects of fan exhaust from pneumatic systems — Amendment 1

60.60 Standard published

ISO/TC 23/SC 3

Tractors and machinery for agriculture and forestry — Sustainability — Part 1: Principles

90.93 Standard confirmed

ISO/TC 23

Agricultural irrigation equipment — Filters — Verification of filtration grade

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural machinery and tractors — Safety of partially automated, semi-autonomous and autonomous machinery — Part 1: Machine design principles and vocabulary

60.60 Standard published

ISO/TC 23/SC 19

Agricultural machinery and tractors — Safety of highly automated agricultural machines — Principles for design

90.92 Standard to be revised

ISO/TC 23/SC 19

Agricultural machinery and tractors — Safety of partially automated, semi-autonomous and autonomous machinery — Part 2: Design principles for obstacle protection systems

60.60 Standard published

ISO/TC 23/SC 19

Agricultural machinery and tractors — Safety of partially automated, semi-autonomous and autonomous machinery — Part 3: Autonomous operating zones

60.60 Standard published

ISO/TC 23/SC 19

Agricultural machinery and tractors — Safety of partially automated, semi-autonomous and autonomous machinery — Part 4: Verification methods and validation principles

60.60 Standard published

ISO/TC 23/SC 19

Rims for agricultural, forestry and construction machines

60.60 Standard published

ISO/TC 31/SC 5

Tyre classification — Agricultural, forestry and construction machines

90.92 Standard to be revised

ISO/TC 31/SC 5

Agricultural tyres for construction machines

60.60 Standard published

ISO/TC 31/SC 5

Agricultural vehicles — Mechanical connections on towed vehicles — Dimensions for hitch rings

90.92 Standard to be revised

ISO/TC 23/SC 4

Agricultural vehicles — Mechanical connections on towed vehicles — Dimensions for hitch rings — Technical Corrigendum 1

60.60 Standard published

ISO/TC 23/SC 4

Tractors and machinery for agriculture and forestry — Camera interface between tractor and implement — Part 1: Analogue camera interface

90.93 Standard confirmed

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Speed Identification Sign (SIS)

90.92 Standard to be revised

ISO/TC 23/SC 4

Agricultural tractors — Remote control hydraulic cylinders for trailed implements

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural equipment — Mechanical connections between towed and towing vehicles — Implement hitch rings and attachment to tractor drawbars

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural vehicles — Standardized access to repair and maintenance information (RMI) — Part 1: User interface requirements for web-based information systems

60.60 Standard published

ISO/TC 23

Agricultural vehicles — Standardized access to repair and maintenance information (RMI) — Part 2: Vehicle on-board diagnostics

60.60 Standard published

ISO/TC 23

Permissible mechanical connection combinations between towed and towing agricultural vehicles

60.60 Standard published

ISO/TC 23/SC 4

Fine bubble technology — Agricultural applications — Part 2: Test method for evaluating the promotion of the germination of barley seeds

90.60 Close of review

ISO/TC 281

Fine bubble technology — Agricultural applications — Part 4: Test method for evaluating the number concentration of ultrafine bubbles (UFB) achieving the promotion of barley seed germination

60.60 Standard published

ISO/TC 281

Agricultural and forestry machinery — Unmanned aerial spraying systems — Part 1: Environmental requirements

60.60 Standard published

ISO/TC 23/SC 6

Agricultural tractors — Instructional seat

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural wheeled tractors and attachments — Front loaders — Carriages for attachments

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural wheeled tractors and attachments — Front loaders — Carriages for attachments — Technical Corrigendum 1

60.60 Standard published

ISO/TC 23/SC 4

Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 1: General

60.60 Standard published

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 2: Physical interface

60.60 Standard published

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 3: Safety requirements

60.60 Standard published

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 4: AC operation mode

60.60 Standard published

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 5: DC operation mode

60.60 Standard published

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 6: Communication signals

60.60 Standard published

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Electrical high-power interface 700 V DC / 480 V AC — Part 7: Mechanical integration

60.60 Standard published

ISO/TC 23/SC 19

Agricultural tractors and machinery — Connection of implements via three-point linkage — Clearance zone around implement

90.93 Standard confirmed

ISO/TC 23/SC 4

Plastics — Soil biodegradable materials for mulch films for use in agriculture and horticulture — Requirements and test methods regarding biodegradation, ecotoxicity and control of constituents

60.60 Standard published

ISO/TC 61/SC 14

Belt drives — V-belts and the corresponding pulleys for agricultural machineries — Dimensions

90.20 Standard under periodical review

ISO/TC 41/SC 1

Agricultural irrigation equipment — Guideline on the implementation of pressurized irrigation systems — Part 1: General principles of irrigation

60.60 Standard published

ISO/TC 23/SC 18

Agricultural irrigation equipment — Guideline on the implementation of pressurized irrigation systems — Part 2: Drip irrigation

60.60 Standard published

ISO/TC 23/SC 18

Agricultural vehicles — Mechanical connections between towed and towing vehicles — Dimensions of ball coupling device (80 mm)

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural irrigation equipment — Manually and hydraulically operated plastics valves

60.60 Standard published

ISO/TC 23/SC 18

Agricultural irrigation equipment — Manually and hydraulically operated plastics valves — Amendment 1

60.60 Standard published

ISO/TC 23/SC 18

Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 1: General principles for design and development

90.93 Standard confirmed

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 1: General principles for design and development — Amendment 1

60.60 Standard published

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 2: Concept phase

90.60 Close of review

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 3: Series development, hardware and software

90.93 Standard confirmed

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 3: Series development, hardware and software — Amendment 1

60.60 Standard published

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 4: Production, operation, modification and supporting processes

90.93 Standard confirmed

ISO/TC 23/SC 19

Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 4: Production, operation, modification and supporting processes — Amendment 1

60.60 Standard published

ISO/TC 23/SC 19

Tractors for agriculture and forestry — Safety — Part 1: Standard tractors

90.92 Standard to be revised

ISO/TC 23/SC 4

Tractors for agriculture and forestry — Safety — Part 2: Narrow-track and small tractors

90.92 Standard to be revised

ISO/TC 23/SC 4

Agricultural vehicles — Steering systems for agricultural trailers — Interface for articulated steering device of semi-mounted trailers

90.93 Standard confirmed

ISO/TC 23/SC 4

Tractors for agriculture and forestry — Falling object protective structures — Test procedures and performance requirements

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural machinery — Endless variable-speed V-belts and groove sections of corresponding pulleys

90.92 Standard to be revised

ISO/TC 41/SC 1

Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Dynamic test method and acceptance conditions

90.60 Close of review

ISO/TC 23/SC 2

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and format

60.60 Standard published

ISO/TC 23/SC 14

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols

90.60 Close of review

ISO/TC 23/SC 14

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols — Amendment 1

60.60 Standard published

ISO/TC 23/SC 14

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery

90.60 Close of review

ISO/TC 23/SC 14

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery — Amendment 1

60.60 Standard published

ISO/TC 23/SC 14

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 3: Symbols for powered lawn and garden equipment

90.60 Close of review

ISO/TC 23/SC 14

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 4: Symbols for forestry machinery

90.60 Close of review

ISO/TC 23/SC 14

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 5: Symbols for manual portable forestry machines

90.93 Standard confirmed

ISO/TC 23/SC 14

Tractors and machinery for agriculture — Seat belts — Part 1: Anchorage location requirements

90.93 Standard confirmed

ISO/TC 23/SC 3

Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements

90.92 Standard to be revised

ISO/TC 23/SC 2

Tractors and machinery for agriculture — Seat belts — Part 3: Requirements for assemblies

90.60 Close of review

ISO/TC 23/SC 2

Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials

90.60 Close of review

ISO/TC 22

Agricultural wheeled tractors — Maximum speeds — Method of determination

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural tractors and machinery — Track widths

90.93 Standard confirmed

ISO/TC 23/SC 4

Polyolefin agricultural twines

90.93 Standard confirmed

ISO/TC 38

Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines — Part 1: Tyre designation and dimensions, and approved rim contours

90.60 Close of review

ISO/TC 31/SC 5

Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines — Part 2: Tyre load ratings

90.60 Close of review

ISO/TC 31/SC 5

Agricultural tractors — Operator's workplace, access and exit — Dimensions

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural tractors — Operator's seating accommodation — Dimensions

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural machinery — Safety — Part 10: Rotary tedders and rakes

90.93 Standard confirmed

ISO/TC 23/SC 7

Agricultural machinery — Safety — Part 11: Pick-up balers

90.93 Standard confirmed

ISO/TC 23/SC 7

Agricultural machinery — Safety — Part 11: Pick-up balers — Amendment 1

60.60 Standard published

ISO/TC 23/SC 7

Agricultural machinery — Safety — Part 1: General requirements

90.60 Close of review

ISO/TC 23/SC 3

Agricultural machinery — Safety — Part 1: General requirements — Amendment 1

60.60 Standard published

ISO/TC 23/SC 3

Agricultural machinery — Safety — Part 12: Rotary disc and drum mowers and flail mowers

90.93 Standard confirmed

ISO/TC 23/SC 7

Agricultural machinery — Safety — Part 12: Rotary disc and drum mowers and flail mowers — Amendment 1

60.60 Standard published

ISO/TC 23/SC 7

Agricultural machinery — Safety — Part 13: Large rotary mowers

60.60 Standard published

ISO/TC 23/SC 7

Agricultural machinery — Safety — Part 14: Bale wrappers

90.93 Standard confirmed

ISO/TC 23/SC 7

Agricultural machinery — Safety — Part 16: Portable agricultural grain augers

90.60 Close of review

ISO/TC 23/SC 3

Agricultural machinery — Safety — Part 17: Root crop harvesters

60.60 Standard published

ISO/TC 23/SC 7

Agricultural machinery — Safety — Part 5: Power-driven soil-working machines

90.93 Standard confirmed

ISO/TC 23/SC 3

Agricultural machinery — Safety — Part 6: Sprayers and liquid fertilizer distributors

90.92 Standard to be revised

ISO/TC 23/SC 6

Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters

90.93 Standard confirmed

ISO/TC 23/SC 7

Agricultural machinery — Safety — Part 8: Solid fertilizer distributors

90.93 Standard confirmed

ISO/TC 23/SC 3

Agricultural machinery — Safety — Part 9: Seed drills

90.60 Close of review

ISO/TC 23/SC 3

Agricultural sprayers — Recording of spray drift parameters

60.60 Standard published

ISO/TC 23/SC 6

Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4 — Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural tractors — Rear-mounted power take-off types 1, 2 and 3 — Part 2: Narrow-track tractors, dimensions for master shield and clearance zone

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4 — Part 3: Main PTO dimensions and spline dimensions, location of PTO

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural wheeled tractors — Operator's seat — Laboratory measurement of transmitted vibration

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural wheeled tractors and field machinery — Measurement of whole-body vibration of the operator

90.60 Close of review

ISO/TC 23/SC 2

Agricultural wheeled tractors and field machinery — Measurement of whole-body vibration of the operator — Technical Corrigendum 1

60.60 Standard published

ISO/TC 23/SC 2

Sisal agricultural twines

90.93 Standard confirmed

ISO/TC 38

Tractors for agriculture and forestry — Measurement of noise at the operator's position — Survey method

90.60 Close of review

ISO/TC 23/SC 2

Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point

90.93 Standard confirmed

ISO/TC 127/SC 2

Agricultural food products — Determination of crude fibre content — General method

90.93 Standard confirmed

ISO/TC 34

Agricultural trailers — Single-acting telescopic tipping cylinders — 25 MPa (250 bar) series — Types 1, 2 and 3 — Interchangeability dimensions

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural tractors and machinery — Power take-off drive shafts and power-input connection — Part 1: General manufacturing and safety requirements

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural tractors and machinery — Power take-off drive shafts and power-input connection — Part 2: Specification for use of PTO drive shafts, and position and clearance of PTO drive line and PIC for various attachments

90.93 Standard confirmed

ISO/TC 23/SC 4

Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria

90.92 Standard to be revised

ISO/TC 23/SC 2

Agricultural tractors and machinery — General purpose quick-action hydraulic couplers

60.60 Standard published

ISO/TC 23/SC 4

Tractors and machinery for agriculture and forestry — Hydraulic coupling — Braking circuit

60.60 Standard published

ISO/TC 23/SC 4

Agricultural machinery — Equipment for working the soil — S-tines: main dimensions and clearance zones

90.93 Standard confirmed

ISO/TC 23

Agricultural vehicles — Mechanical connections on towed vehicles — Part 1: Dimensions for hitch rings of 50/30 mm cross section

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural vehicles — Mechanical connections on towed vehicles — Part 2: Coupling ring 40 with socket

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural vehicles — Mechanical connections on towed vehicles — Part 2: Coupling ring 40 with socket — Technical Corrigendum 1

60.60 Standard published

ISO/TC 23/SC 4

Agricultural vehicles — Mechanical connections on towed vehicles — Part 3: Swivel hitch rings

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural and forestry vehicles — Determination of braking performance

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural machines, implements and equipment — Dimensions for mechanical loading with bulk goods

90.93 Standard confirmed

ISO/TC 23

Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions

90.92 Standard to be revised

ISO/TC 23/SC 2

Tractors and machinery for agriculture and forestry — Wheel-to-hub fixing dimensions

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural tractors — Requirements, test procedures and acceptance criteria for the operator's field of vision — Part 1: Field of vision to the front

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural tractors— Requirements, test procedures and acceptance criteria for the operator's field of vision — Part 2: Field of vision to the side and to the rear

90.20 Standard under periodical review

ISO/TC 23/SC 4

Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 1: Dimensions of hitch-hooks

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 2: Specifications for clevis coupling 40

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 3: Tractor drawbar

60.60 Standard published

ISO/TC 23/SC 4

Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 4: Dimensions of piton-type coupling

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 5: Specifications for non-swivel clevis couplings

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural food products — Determination of crude fibre content — Modified Scharrer method

90.93 Standard confirmed

ISO/TC 34

Agricultural machinery — Equipment for sowing, planting, distributing fertilizers and spraying — Recommended working widths

90.60 Close of review

ISO/TC 23

Machinery for agriculture — Trailed units of shallow tillage equipment — Main dimensions and attachment points

90.60 Close of review

ISO/TC 23

Agricultural food products — Layout for a standard method of sampling from a lot

90.93 Standard confirmed

ISO/TC 34

Tractors and machinery for agriculture and forestry — Linch pins and spring pins — Dimensions and requirements

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural and forestry tractors — Measurement of noise emitted when in motion

90.60 Close of review

ISO/TC 23/SC 2

Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 — Amendment 1

60.60 Standard published

ISO/TC 23/SC 4

Agricultural irrigation equipment — Volumetric valves — General requirements and test methods

90.60 Close of review

ISO/TC 23/SC 18

Metric series for agricultural, forestry machines and construction tyres — Part 1: Tyre designation, dimensions and marking, and tyre/rim coordination

90.93 Standard confirmed

ISO/TC 31/SC 5

Metric series for agricultural, forestry machines and construction tyres — Part 2: Load ratings for agricultural tyres

90.93 Standard confirmed

ISO/TC 31/SC 5

Agricultural tractors — Test procedures — Part 11: Steering capability of wheeled tractors

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural tractors — Test procedures — Part 1: Power tests for power take-off

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural tractors — Test procedures — Part 12: Low temperature starting

90.20 Standard under periodical review

ISO/TC 23/SC 2

Agricultural tractors — Test procedures — Part 13: Vocabulary and specimen test report

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural tractors — Test procedures — Part 2: Rear three-point linkage lifting capacity

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural tractors — Test procedures — Part 4: Measurement of exhaust smoke

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural tractors — Test procedures — Part 6: Centre of gravity

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural tractors — Test procedures — Part 7: Axle power determination

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural tractors — Test procedures — Part 8: Engine air cleaner

90.93 Standard confirmed

ISO/TC 23/SC 2

Agricultural tractors — Test procedures — Part 9: Power tests for drawbar

90.93 Standard confirmed

ISO/TC 23/SC 2

Machinery for agriculture — Wheels with integral hub

90.93 Standard confirmed

ISO/TC 23

Agricultural irrigation equipment — Sprayers — General requirements and test methods

90.93 Standard confirmed

ISO/TC 23/SC 18

Tyres for agricultural tractors and machines — Code-designated and service-description marked radial drive-wheel tyres

90.93 Standard confirmed

ISO/TC 31/SC 5

Agricultural tractors — Front-mounted equipment — Part 1: Power take-off: Safety requirements and clearance zone around PTO

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural wheeled tractors — Front-mounted equipment — Part 2: Stationary equipment connection

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural tractors — Front-mounted equipment — Part 3: Power take-off: General specifications and location

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural tractors — Front-mounted equipment — Part 4: Three-point linkage

90.93 Standard confirmed

ISO/TC 23/SC 4

Tractors for agriculture and forestry — Mountings and apertures for external equipment controls

90.93 Standard confirmed

ISO/TC 23/SC 4

Agricultural machinery — Equipment for working the soil — S-tines: test method

90.93 Standard confirmed

ISO/TC 23

Agricultural irrigation equipment — Emitters and emitting pipe — Specification and test methods

90.20 Standard under periodical review

ISO/TC 23/SC 18

Equipment for crop protection — Agricultural sprayers — Tank nominal volume and filling hole diameter

90.93 Standard confirmed

ISO/TC 23/SC 6

Agricultural irrigation equipment — Irrigation valves — Part 1: General requirements

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural irrigation equipment — Irrigation valves — Part 2: Isolating valves

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural irrigation equipment — Irrigation valves — Part 3: Check valves

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural irrigation equipment — Irrigation valves — Part 5: Control valves

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural irrigation equipment — Pressure losses in irrigation valves — Test method

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural irrigation equipment — Filters for micro-irrigation — Part 1: Terms, definitions and classification

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural irrigation equipment — Filters for microirrigation — Part 2: Strainer-type filters and disc filters

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural irrigation equipment — Filters for microirrigation — Part 3: Automatic flushing strainer-type filters and disc filters

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural irrigation equipment — Filters for microirrigation — Part 4: Granulated media filters

90.93 Standard confirmed

ISO/TC 23/SC 18

Agricultural irrigation equipment — Test facilities for agricultural irrigation equipment — Part 1: General

60.60 Standard published

ISO/TC 23/SC 18

Agricultural irrigation equipment — Test facilities for agricultural irrigation equipment — Part 2: Test facility operating manual

60.60 Standard published

ISO/TC 23/SC 18

Fine bubble technology — Agricultural applications — Part 3: Guidelines for the minimum viable number concentration of ultrafine bubbles for promoting the germination of barley seeds

60.60 Standard published

ISO/TC 281

Fine bubble technology — Agricultural applications — Part 5: Practical data collection to promote the germination of typical vegetable seeds using ultrafine bubbles

60.60 Standard published

ISO/TC 281

Ergonomics — Application of ISO 11226, the ISO 11228 series and ISO/TR 12295 in the agricultural sector

60.60 Standard published

ISO/TC 159/SC 3

Fine bubble technology — Agricultural applications — Part 1: Test method for evaluating the growth promotion of hydroponically grown lettuce

90.92 Standard to be revised

ISO/TC 281

Agricultural machinery — Guards for moving parts of power transmission — Guard opening with tool

90.93 Standard confirmed

ISO/TC 23/SC 3

Agricultural machinery - Guards for moving parts of power transmission - Guard opening without tool

90.93 Standard confirmed

ISO/TC 23/SC 3