Stationary source emissions - Calibration of elemental and oxidised mercury gas generators for SI-traceable mercury concentration measurements in air
00.60 Close of review
Fugitive and diffuse emissions of common concern to industry sectors — Standard method to determine diffuse emissions of methane into the atmosphere
00.60 Close of review
Fugitive and diffuse emissions of common concern to industry sectors – Detection of fugitive emission of vapours generating from equipment and piping leaks using Optical Gas Imaging (OGI)
00.60 Close of review
Stationary source emissions - Diffuse emissions measurement methods - Overview of standards and guides
00.60 Close of review
Stationary source emissions – Measurement of diffuse emissions from building vents and roof openings
00.60 Close of review
Furniture and furniture components – Assessment of release of dangerous substances - Determination of emissions into indoor air
00.60 Close of review
Gas infrastructure — Methodology for methane emissions quantification for gas transmission, and distribution systems, underground gas storage and LNG terminals
10.99 New project approved
Fragment 3: Rationale for measurements and procedures for wired network port emissions
30.60 Close of voting/ comment period
CISPR TR 30-3 Test Method on Electromagnetic Emissions – Part 3: Electronic control gear for LED light sources – Linear built-in drivers
40.99 Full report circulated: DIS approved for registration as FDIS
Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
50.60 Close of voting. Proof returned by secretariat
Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions
10.99 New project approved
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
10.99 New project approved
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
10.99 New project approved
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
10.99 New project approved
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
10.99 New project approved
Electromagnetic compatibility (EMC) - Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
10.99 New project approved
Amendment 1/Fragment 3: Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments - Radiated Magnetic Emissions Requirements below 30 MHz
40.20 DIS ballot initiated: 12 weeks
Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals - Amendment 1 (ISO 14064 1:2018/DAM 1:2024)
40.60 Close of voting
Methodology for methane emissions quantification for gas transmission, distribution and storage systems and LNG terminals
50.60 Close of voting. Proof returned by secretariat
Amendment 1 - Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions
30.60 Close of voting/ comment period
Interpretation Sheet 1 - Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
00.99 Approval to ballot proposal for new project
Amendment 1/Fragment 3: Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments - Radiated Magnetic Emissions Requirements below 30 MHz
40.20 DIS ballot initiated: 12 weeks
Quantification and communication of Carbon FootPRINT and GHG emission reductions/avoided emissions from electric and electronic products and systems – Principles, methodologies, requirements and guidance
40.60 Close of voting
Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors — Amendment 1
40.60 Close of voting
Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals — Amendment 1
40.60 Close of voting
Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals
20.00 New project registered in TC/SC work programme
Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions
20.00 New project registered in TC/SC work programme
Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability
20.00 New project registered in TC/SC work programme
Vapour products — Analytical method to measure metals of e-vapor product emissions
20.00 New project registered in TC/SC work programme
Electrical requirements for lifts, escalators and moving walks — Part 1: Electromagnetic compatibility with regard to emissions
20.00 New project registered in TC/SC work programme
Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 1: Manual reference method
30.99 CD approved for registration as DIS
Hydrogen technologies — Methodology for determining the greenhouse gas emissions — Part 1: Emissions associated with the production of hydrogen up to production gate
30.99 CD approved for registration as DIS
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions
30.99 CD approved for registration as DIS
Greenhouse gases — Part 4: Quantification and reporting of greenhouse gas emissions for organizations — Guidance for the application of ISO 14064-1
30.60 Close of voting/ comment period
Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Classification system and qualification procedures for type testing of stem seals for valves
40.60 Close of voting
Motorcycles — Measurement method for evaporative emissions — Part 3: VT-SHED test procedure
40.00 DIS registered
Interior air of road vehicles — Part 11: Thermal desorption analysis of organic emissions for the characterization on non-metallic materials for vehicles
50.00 Final text received or FDIS registered for formal approval
Wood and wood-based products — Greenhouse gas dynamics — Part 3: Displacement of greenhouse gas emissions
50.00 Final text received or FDIS registered for formal approval
Hydrogen Technologies — Methodology for Determining the Greenhouse Gas Emissions — Part 1: Part 1: Emissions associated with the production of hydrogen up to production gate
10.20 New project ballot initiated
Ships and marine technology --Ocean Negative Carbon Emissions and Carbon Neutrality (ONCE-CN) — Part 1: General guidelines and requirements
10.00 Proposal for new project registered
Ships and marine technology --Ocean Negative Carbon Emissions and Carbon Neutrality (ONCE-CN) — Part 1: General guidelines and requirements
10.00 Proposal for new project registered
Ships and marine technology — Ocean Negative Carbon Emissions and Carbon Neutrality (ONCE-CN) — Part 1: General guidelines and requirements
10.60 Close of voting
Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 2: Automated measuring systems
00.00 Proposal for new project received
Hydrogen technologies — Methodology for determining the greenhouse gas emissions — Part 2: Emissions associated with the conditioning and transport of liquid hydrogen up to consumption gate
00.00 Proposal for new project received
Hydrogen technologies — Methodology for determining the greenhouse gas emissions — Part 3: Emissions associated with the bi-directional conversion of hydrogen to ammonia and back, and transport of ammonia and hydrogen up to consumption gate
00.00 Proposal for new project received
Hydrogen technologies — Methodology for determining the greenhouse gas emissions — Part 4: Methodology for determining the greenhouse gas emissions – Part 4: Emissions associated with the bi-directional conditioning of hydrogen into LOHC and back, and transport of LOHC and hydrogen up to consumption gate
00.00 Proposal for new project received
Intelligent transport systems – Extracting trip data using nomadic and mobile devices for estimating CO2 emissions — Part 3: Carbon footprint determination for eco-routing platforms in emission trading systems
00.00 Proposal for new project received
Lithium — Calculation method for CO2 emissions during the production and distribution of lithium
00.00 Proposal for new project received
Methane emissions in upstream oil and gas operations — Part 1: Quantification
00.00 Proposal for new project received
Methane emissions in upstream oil and gas operations — Part 2: Leak detection and repair
00.00 Proposal for new project received
Methane emissions in upstream oil and gas operations — Part 3: Flaring and venting
00.00 Proposal for new project received
Calculations of greenhouse gas emissions (GHG) throughout the liquefied natural gas (LNG) chain — Part 4: Shipping
00.00 Proposal for new project received
Calculations of greenhous gas (GHG) emissions throughout the liquefied natural gas (LNG) chain — Part 5: Regasification
00.00 Proposal for new project received
Monitoring and mitigation of fire laboratory emissions
00.00 Proposal for new project received
Road vehicles — On-board diagnostic communication — Part 3: Zero emissions propulsion systems
20.00 New project registered in TC/SC work programme
Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions
20.60 Close of comment period
Stationary source emissions - Quality assurance of automated measuring systems
00.60 Close of review
Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground) - Laboratory method
40.60 Close of voting
Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method
40.60 Close of voting
EN 17837:2023 – Postal Services – Parcel Delivery Environmental Footprint (PDEF) – Methodology for calculation and declaration of GHG emissions and air pollutants of parcel logistics delivery services
00.60 Close of review
Stationary source emissions — Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs — Part 5: Long-term sampling of PCDDs/PCDFs and PCBs
00.60 Close of review
Quantification and communication of Carbon FootPRINT and GHG emission reductions/avoided emissions from electric and electronic products and systems - Principles, methodologies, requirements and guidance
40.60 Close of voting
Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals
10.99 New project approved
Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method
10.99 New project approved
Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions
10.99 New project approved
Vapour products - Analytical method to measure metals of e-vapor product emissions
10.99 New project approved
