Right to repair


Repair

Coaxial cables used in cabled distribution networks - Part 8: Repair and substitute of damaged buried cables

60.60 Standard published

CLC/TC 46X

Guideline for the repair of damaged installed optical fibre cables and microducts

90.93 Standard confirmed

CLC/TC 86A

Hot, warm or cold forging - Repair conditions prior to delivery

90.93 Standard confirmed

CEN/TC 459/SC 11

Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar

90.60 Close of review

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents

90.93 Standard confirmed

CEN/TC 104

Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements

90.60 Close of review

CEN/TC 201

Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion

90.20 Standard under periodical review

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption

90.60 Close of review

CEN/TC 104

Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation

90.92 Standard to be revised

CEN/TC 104

General requirements for components used for renovation and repair of drain and sewer systems outside buildings

90.93 Standard confirmed

CEN/TC 165

Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Measurement of chloride ion ingress

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression

90.20 Standard under periodical review

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structure - Test Method - Compatibility on wet concrete

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test Methods - Water absorption and resistance to alkali for hydrophobic impregnations

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products

90.92 Standard to be revised

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion

90.60 Close of review

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock)

90.60 Close of review

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact

90.92 Standard to be revised

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling

90.60 Close of review

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock

90.92 Standard to be revised

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Tests methods - Determination of the durability of structural bonding agents

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 1: During cure

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2: After hardening

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete

90.93 Standard confirmed

CEN/TC 104

Products systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability

60.60 Standard published

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works

60.60 Standard published

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete

90.60 Close of review

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding

90.60 Close of review

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection

90.92 Standard to be revised

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar

90.60 Close of review

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP)

90.60 Close of review

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems

90.60 Close of review

CEN/TC 104

Water conditioning equipment inside buildings - Installation, operation, maintenance and repair

90.93 Standard confirmed

CEN/TC 164

Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test)

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off

90.20 Standard under periodical review

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars

90.60 Close of review

CEN/TC 104

Classification and characteristics of techniques for renovation, repair and replacement of drains and sewers

60.60 Standard published

CEN/TC 165

Space product assurance - Repair and modification of printed circuit board assemblies for space use

90.60 Close of review

CEN/CLC/JTC 5

Space product assurance - Repair and modification of printed circuit board assemblies for space use

90.60 Close of review

CEN/CLC/JTC 5

Railway applications - Track - Restoration and repair of manganese crossings

90.20 Standard under periodical review

CEN/TC 256

Agricultural machinery and tractors - Standardized access to repair and maintenance information (RMI) - Requirements

60.60 Standard published

CEN/TC 144

Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures - Testing, requirements and repair strength verification

60.60 Standard published

CEN/TC 193

Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing

90.20 Standard under periodical review

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test

60.60 Standard published

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number

90.93 Standard confirmed

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method

90.60 Close of review

CEN/TC 104

Aerospace series - Pipe coupling 8°30' in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair

90.93 Standard confirmed

ASD-STAN

Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, bulkhead welded end, for repair

90.93 Standard confirmed

ASD-STAN

Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, bulkhead welded end, for repair

60.60 Standard published

ASD-STAN

Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, bulkhead, long welded end, for repair

90.93 Standard confirmed

ASD-STAN

Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, bulkhead, long welded end, for repair

60.60 Standard published

ASD-STAN

Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, welded end threaded for repair

90.93 Standard confirmed

ASD-STAN

Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, welded end threaded for repair

60.60 Standard published

ASD-STAN

Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging

90.20 Standard under periodical review

CEN/TC 160

Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging

60.60 Standard published

CEN/TC 160

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery

90.20 Standard under periodical review

CEN/TC 182

Aerospace series - Fibre optic systems - Handbook - Part 004: Repair, maintenance, cleaning and inspection

60.60 Standard published

ASD-STAN
CEN/CENELEC

General methods for the assessment of the ability to repair, reuse and upgrade energy-related products

60.60 Standard published

CEN/CLC/JTC 10
CEN/CENELEC

General methods for the assessment of the ability to repair, reuse and upgrade energy-related products

60.60 Standard published

CEN/CLC/JTC 10

General procedure for verifying the effectiveness of the protective measures of electrical equipment after repair

60.60 Standard published

CLC/TC 85X

General procedure for verifying the effectiveness of the protective measures of electrical equipment after repair

60.60 Standard published

CLC/TC 85X

Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

60.60 Standard published

CLC/TC 31

Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

60.60 Standard published

CLC/TC 31

Reliability stress screening - Part 1: Repairable assemblies manufactured in lots

60.60 Standard published

CLC/SR 56

Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment

60.60 Standard published

CLC/TC 62

Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work

60.60 Standard published

CLC/TC 121A

Rotating electrical machines - Part 23: Repair, overhaul and reclamation

60.60 Standard published

CLC/TC 2

Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

60.60 Standard published

CLC/TC 31

Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000)

90.92 Standard to be revised

CEN/TC 12

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition (ISO 18541-1:2021)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements (ISO 18541-2:2021)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements (ISO 18541-3:2021)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test (ISO 18541-4:2021)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 5: Heavy duty specific provision (ISO 18541-5:2018)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018, Corrected version 2018-05)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 1: General information and use case definition (ISO 18542-1:2012)

60.60 Standard published

CEN/TC 301

Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 2: Standardized process implementation requirements, Registration Authority (ISO 18542-2:2014)

60.60 Standard published

CEN/TC 301

Pallets for materials handling - Repair of flat wooden pallets (ISO 18613:2014)

90.93 Standard confirmed

CEN/TC 261

Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 2: Maintenance and field repair coatings for riser pipes (ISO 18797-2:2021)

60.60 Standard published

CEN/TC 12

Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2017, Corrected version 2018-01-01)

60.60 Standard published

CEN/TC 12

Rotating electrical machines - Part 23: Repair, overhaul and reclamation

60.60 Standard published

TC 2

Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

60.60 Standard published

TC 31/SC 31J

Reliability stress screening - Part 1: Repairable assemblies manufactured in lots

60.60 Standard published

TC 56

Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment

60.60 Standard published

TC 62/SC 62A

Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work

60.60 Standard published

TC 121/SC 121A

Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 23: Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies

60.60 Standard published

TC 107

Petroleum and natural gas industries — Drilling and production equipment — Inspection, maintenance, repair and remanufacture of hoisting equipment

90.20 Standard under periodical review

ISO/TC 67/SC 4

Ships and marine technology — Bulk carriers — Repair quality of hull structure

90.93 Standard confirmed

ISO/TC 8/SC 8

Pallets for materials handling — Quality of fasteners for assembly of new and repair of used, flat, wooden pallets

90.93 Standard confirmed

ISO/TC 51

Maintenance and repair of concrete structures — Part 1: General principles

90.93 Standard confirmed

ISO/TC 71/SC 7

Maintenance and repair of concrete structures — Part 2: Assessment of existing concrete structures

90.93 Standard confirmed

ISO/TC 71/SC 7

Maintenance and repair of concrete structures — Part 3: Design of repairs and prevention

90.93 Standard confirmed

ISO/TC 71/SC 7

Maintenance and repair of concrete structures — Part 4: Execution of repairs and prevention

90.93 Standard confirmed

ISO/TC 71/SC 7

Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement

90.93 Standard confirmed

ISO/TC 5/SC 2

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 1: General information and use case definition

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 2: Technical requirements

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 3: Functional user interface requirements

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 4: Conformance test

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 5: Heavy duty specific provision

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 6: L-Category vehicle specific RMI use cases and requirements

60.60 Standard published

ISO/TC 22/SC 31

Road vehicles — Standardized repair and maintenance information (RMI) terminology — Part 1: General information and use case definition

90.93 Standard confirmed

ISO/TC 22/SC 31

Road vehicles — Standardized repair and maintenance information (RMI) terminology — Part 2: Standardized process implementation requirements, Registration Authority

90.93 Standard confirmed

ISO/TC 22/SC 31

Pallets for materials handling — Repair of flat wooden pallets

90.93 Standard confirmed

ISO/TC 51

Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 2: Maintenance and field repair coatings for riser pipes

60.60 Standard published

ISO/TC 67

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 11: Coatings for in-field application, coating repairs and rehabilitation

60.60 Standard published

ISO/TC 67/SC 2

Agricultural vehicles — Standardized access to repair and maintenance information (RMI) — Part 1: User interface requirements for web-based information systems

60.60 Standard published

ISO/TC 23

Agricultural vehicles — Standardized access to repair and maintenance information (RMI) — Part 2: Vehicle on-board diagnostics

60.60 Standard published

ISO/TC 23

Cleaning, inspection and repair of firefighters' personal protective equipment (PPE)

60.60 Standard published

ISO/TC 94/SC 14

Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection

60.60 Standard published

ISO/TC 67/SC 6

Industrial trucks — Inspection and repair of fork arms in service on fork-lift trucks

90.92 Standard to be revised

ISO/TC 110/SC 2

Refrigerating systems and heat pumps — Safety and environmental requirements — Part 4: Operation, maintenance, repair and recovery

90.92 Standard to be revised

ISO/TC 86/SC 1

Cardiovascular implants and extracorporeal systems — Cardiac valve repair devices

90.92 Standard to be revised

ISO/TC 150/SC 2

Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear — Part 1: General requirements for training providers

90.92 Standard to be revised

ISO/TC 8/SC 1

Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear — Part 2: Service personnel initial training

90.92 Standard to be revised

ISO/TC 8/SC 1

Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear — Part 3: Level 1 technician training

90.92 Standard to be revised

ISO/TC 8/SC 1

Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear — Part 4: Level 2 in-field competence

90.92 Standard to be revised

ISO/TC 8/SC 1

General practices for the repair of water-leakage cracks in concrete structures

60.60 Standard published

ISO/TC 71/SC 7

Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 1: Test method for thermal stability

90.92 Standard to be revised

ISO/TC 71/SC 7

Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 2: Test method for chemical resistance

90.92 Standard to be revised

ISO/TC 71/SC 7

Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 3: Test method for water (wash out) resistance

90.92 Standard to be revised

ISO/TC 71/SC 7

Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 4: Test method for adhesion on wet concrete surface

90.92 Standard to be revised

ISO/TC 71/SC 7

Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 5: Test method for watertightness

90.92 Standard to be revised

ISO/TC 71/SC 7

Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 6: Test method for response to the substrate movement

90.92 Standard to be revised

ISO/TC 71/SC 7