60.60 Standard published Mar 16, 2022
CEN
CEN/TC 231 Mechanical vibration and shock
European Norm
13.160 Vibration and shock with respect to human beings | 25.140.10 Pneumatic tools
This document specifies a laboratory method for measuring the vibration at the handle of fastener driving tools. It is a type test procedure for establishing the vibration value on the handle of a hand-held power tool operating under a specified load.
This document is applicable to fastener driving tools driven pneumatically or by other means, using nails, staples or pins.
This document is applicable to tools with single sequential actuation, contact actuation, contact actuation with automatic reversion or continual contact actuation (see Figures 1 to 3).
This document is not applicable to tools operating in full sequential mode due to their much longer intervals in between individual actuations. However, to provide an indication for comparison of different tools of this type (see Figures 4 and 5), Annex C provides informative guidance.
NOTE Today current knowledge does not allow any conclusions regarding physiological and pathological effects between isolated shocks and continuous shock sequences, and their repetition rates.
Legislation related to this standard
Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Harmonized/Supporting
PUBLISHED
EN ISO 28927-13:2022
60.60
Standard published
Mar 16, 2022