EN 620:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials

Publication date:   Feb 17, 2011

General information

99.60 Withdrawal effective   Oct 6, 2021

CEN

CEN/TC 148 Continuous handling equipment and systems - Safety

European Norm

53.040.10   Conveyors

Buying

  Withdrawn

PDF - €68.52

  English  



Buy

Scope

This European standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during operation and maintenance of fixed belt conveyors and systems as defined in 3.1 to 3.2.4 and designed for continuously conveying loose bulk materials from the loading point(s) to the unloading point(s). Requirements for electromagnetic compatibility are also covered.
1.2 This standard applies to use in ambient air temperatures of -15 °C to + 40 °C.
1.3 This standard does not cover:
a) use in open cast lignite mining or use underground, such as in mines or tunnels;
b) use in public areas or for man-riding;
c) floating, dredging and ship mounted equipment;
d) conveyors requiring a high level of cleanliness for hygiene reasons, e.g. in direct contact with foodstuffs or pharmaceuticals;
e) conveyors using a moving belt with other than a continuous rubber or polymeric surface for the conveying medium;
f) transportation of the conveyor;
g) the design of the supporting structure which is not part of a conveyor (see 3.2);
h) the effects of wind;
i) hazards resulting from handling specific hazardous materials, (e.g. explosives, radiating material);
j) hazards resulting from contact with or inhalation of harmful fluids, gases, mists, fumes or dust;
k) biological and micro-biological (viral or bacterial) hazards;
l) hazards due to heat radiation from the materials handled;
m) hazards caused by operation in electromagnetic fields outside the range of EN 61000-6-2: 1999;
n) hazards caused by operation subject to special regulations (e.g. explosive atmospheres);
o) hazards caused by noise;
p) hazards caused by the use of ionising radiation sources;
q) hazards caused by hydraulic equipment.
The safety requirements of this standard apply to equipment and systems placed on the market after the date of publication of this standard.

Related legislation

Legislation related to this standard

2006/42/EC

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

Harmonized/Supporting
2004/108/EC

Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC

Harmonized/Supporting
2014/30/EU

Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)

Harmonized/Supporting

Life cycle

NOW

WITHDRAWN
EN 620:2002+A1:2010
99.60 Withdrawal effective
Oct 6, 2021

REVISED BY

PUBLISHED
EN 620:2021