EN 50059:2018

Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable coating materials EN 50059:2018

Publication date:   Dec 17, 2018

Scope

1.1 This European Standard specifies the requirements for hand-held or hand-operated electrostatic spraying equipment for non-ignitable liquid coating materials which
— do not generate an explosive atmosphere inside the spraying area;
— are used to process materials with a conductivity of less than 2 000 µS/cm;
— operate with direct current having a sinusoidal ripple of not more than 10 % of the rms value.
This European Standard deals with all electrical hazards significant for the electrostatic spraying of non-ignitable liquid coating materials, which could also contain small quantities of added metal particles, if the work is carried out under conditions recommended by the manufacturer.
This European Standard specifies the design-related and test requirements for electrostatic spraying equipment of type A-NL according to Table 1 of EN 50348:2010.
1.2 With regard to all other significant hazards relevant for applicators (e.g. ejection of fluids, mechanical strength, electrical - apart from electrostatic - hazards, noise, contact with or inhalation of dangerous substances, ergonomics) the requirements of EN 1953 apply.
1.3 This European Standard also gives details regarding quality assurance systems for electrostatic spraying equipment, see Annex D.
1.4 For electrostatic spraying equipment used in food and pharmaceutical industry, additional requirements may apply.
1.5 This document is not applicable to
— electrostatic hand-held spraying equipment for non-ignitable coating materials which are manufactured before the date of its publication as EN,
— cleaning of spraying areas, see instruction manual of the spraying booth,
— fire prevention and protection [for instance fire hazards due to other sources; see EN 12215, EN 12981],
— requirements for machinery for the supply and recirculation of coating material under pressure
[see EN 12621].
The requirements of EN 12621 apply for specific requirements for machinery for the supply and recirculation of coating materials under pressure.

Related legislation

Legislation related to this standard