Main menu
This European Standard specifies safety requirements and measures for all types and sizes of Mobile Elevating Work Platform intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis.
NOTE Machines designed for the handling of goods which are equipped with work platforms as interchangeable equipment are regarded as MEWPs.
This European Standard is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards.
Classification: MEWPs are divided into two main groups:
a) Group A: MEWPs where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines.
b) Group B: All other MEWPs.
Relating to travelling, MEWPs are divided into three types:
1) Type 1: Travelling is only allowed with the MEWP in its transport configuration;
2) Type 2: Travelling with raised work platform is controlled from a point of control at the chassis;
3) Type 3: Travelling with raised work platform is controlled from a point of control at the work platform.
NOTE Type 2 and type 3 can be combined.
Legislation related to this standard
Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
WITHDRAWN
EN 280:2013
IN_DEVELOPMENT
EN 280:2013/FprA1
50.60
Close of voting. Proof returned by secretariat
May 26, 2015