SBS Priority Sector 01 - Construction

The following standardization activities related to the Construction Sector have been considered of particular relevance for SMEs, according to the study of priority sectors commissioned by Small Business Standards (SBS). See at the end of the page for the list of work items identified as a high priority for SMEs in Europe in the Construction sector.

This webpage is intended to facilitate the follow up of standardisation activities by SMEs representatives in Europe and at the international level.

By clicking on the corresponding hyperlinks, SBS members and other stakeholders can check relevant drafts and standards corresponding to this sector.

CEN and CENELEC Technical Committees

The following Technical Committees have been considered to be of highest priority in the Construction Sector:

CEN/CLC/JTC 11 - Accessibility in the built environment
CEN/TC 33 - Doors, windows, shutters, building hardware and curtain walling
CEN/TC 38 - Durability of wood and wood-based products
CEN/TC 51 - Cement and building limes

CEN/TC 53 - Temporary works equipment

CEN/TC 67 - Ceramic tiles
CEN/TC 89 - Thermal performance of buildings and building components
CEN/TC 88 - Thermal insulating materials and products
CEN/TC 104 - Concrete and related products
CEN/TC 112 - Wood-based panels
CEN/TC 124 - Timber structures
CEN/TC 125 - Masonry
CEN/TC 126 - Acoustic properties of building elements and of buildings
CEN/TC 127 - Fire safety in buildings
CEN/TC 128 - Roof covering products for discontinuous laying and products for wall cladding
CEN/TC 129 - Glass in building
CEN/TC 134 - Resilient, textile and laminate floor coverings
CEN/TC 154 - Aggregates

CEN/TC 155 - Plastics piping systems and ducting systems

CEN/TC 156 - Ventilation for buildings
CEN/TC 163 - Sanitary appliances
CEN/TC 166 - Chimneys
CEN/TC 169 - Light and lighting
CEN/TC 175 - Round and sawn timber
CEN/TC 185 - Fasteners
CEN/TC 208 - Elastomeric seals for joints in pipework and pipelines
CEN/TC 217 - Surfaces for sports areas
CEN/TC 229 - Precast concrete products
CEN/TC 247 - Building Automation, Controls and Building Management
CEN/TC 250 - Structural Eurocodes
CEN/TC 203 - Cast iron pipes, fittings and their joints
CEN/TC 218 - Rubber and plastics hoses and hose assemblies

CEN/TC 227 - Road materials
CEN/TC 228 - Heating systems and water based cooling systems in buildings
CEN/TC 243 - Cleanroom technology
CEN/TC 254 - Flexible sheets for waterproofing
CEN/TC 288 - Execution of special geotechnical works
CEN/TC 303 - Floor screeds and screed materials

CEN/TC 315 - Spectator facilities
CEN/TC 336 - Bituminous binders
CEN/TC 340 - Anti-seismic devices
CEN/TC 341 - Geotechnical Investigation and Testing
CEN/TC 346 - Conservation of Cultural Heritage
CEN/TC 350 - Sustainability of construction works
CEN/TC 351 - Construction Products - Assessment of release of dangerous substances
CEN/TC 371 - Energy Performance of Buildings project group
CEN/TC 442 - Building Information Modelling (BIM)
CEN/TC 459/SC 4 - Concrete reinforcing and prestressing steels
CEN/TC 459/SC 3 - Structural steels other than reinforcements
CEN/SS F01 - Technical drawings  

Draft standards and harmonised standards under the Construction Products Regulation

The link provided in this paragraph helps SBS Members and stakeholders to identify the status of draft standards and published harmonised standards drafted in support of the application of the Construction Products Regulation - Regulation (EU) No 305/2011: https://genorma.com/en/directive/show/305/2011

Selected work items of special interest for SMEs

Please see at the end of the page the Work Items with code, title and stage of the draft.
Those Work Items that do not have a code, are provided below:

CEN/TC 88 - Thermal insulating materials and products

  • prEN XXXX - Thermal insulation products for buildings — Factory made reflective insulation products (RI) — Specification (https://genorma.com/en/project/show/cen:proj:65898)
  • prEN XXXX-2 - Thermal insulation products — Determination of ageing by settlement — Part 2: Blown loose fill and injected insulation for cavity walls and timber and steel framed walls, simulating vibration (https://genorma.com/en/project/show/cen:proj:71046)
  • prEN XXXX-3 - Thermal insulating products — Determination of ageing by settlement — Part 3: Determination of settlement for blown or injected loose fill insulation for closed cavities, simulating humidity and temperature cycling (https://genorma.com/en/project/show/cen:proj:71045)
  • prEN XXXX-1 - In-situ formed thermal insulation products for buildings - Bonded expanded polystyrene beads for cavity walls - Part 1: Specification for the expanded polystyrene beads and binder (https://genorma.com/en/project/show/cen:proj:2166)
  • prEN XXXX-1 - In-situ formed thermal insulation products for buildings - Blown fibrous thermal insulation for frame constructions - Part 1: Specification for the fibrous material (https://genorma.com/en/project/show/cen:proj:2187)
  • prEN XXXX-4 - In-situ formed thermal insulation products for buildings - Expanded clay lightweight aggregate loose fill for roofs, ceilings, floors and around buildings - Part 4: Method of installation in solid ground floors and specification for the installed product (https://genorma.com/en/project/show/cen:proj:2161)
  • prEN XXXX-2 - In-situ formed thermal insulation products for buildings - Blown fibrous thermal insulation for frame constructions - Part 2: Method of installation and specification for the installed product (https://genorma.com/en/project/show/cen:proj:2188)
  • prEN XXXX-1 In-situ formed thermal insulation products for buildings - Sprayed fibrous thermal insulation for frame constructions - Part 1: Specification for the fibrous material and binder (https://genorma.com/en/project/show/cen:proj:2189)
  • prEN XXXX-2 In-situ formed thermal insulation products for buildings - Sprayed fibrous thermal insulation for frame constructions - Part 2: Method of installation and specification for the installed product (https://genorma.com/en/project/show/cen:proj:2191)
  • prEN XXXX-3 In-situ formed thermal insulation products for buildings - Expanded perlite for roofs, ceilings, walls and floors - Part 3: Method of installation in walls and specification for the installed products (https://genorma.com/en/project/show/cen:proj:2195)
  • prEN XXXX-4 - In-situ formed thermal insulation products for buildings - Expanded perlite for roofs, ceilings, walls and floors - Part 4: Method of installation in floors and specification for the installed product (https://genorma.com/en/project/show/cen:proj:2196)
    -prEN XXXX - Assessment of the resistance of insulation products against mould development (https://genorma.com/en/project/show/cen:proj:66743)

CEN/TC 155 - Plastics piping systems and ducting systems

CEN/TC 227 - Road materials

CEN/TC 351 Construction Products - Assessment of release of dangerous substances

Additional draft standards without prEN xxx name:

Drafts with project number:

Priority work items

Below you can find an interactive list of work items for follow up of the priorities for SMEs in Europe in the Construction sector. Click below on each work item for additional information.

Energy performance of buildings - Controls for heating systems - Part 6: Accompanying TR EN 12098-1:2022 - Modules M3-5,6,7,8

60.60 Standard published

CEN/TC 247

Energy performance of buildings - Controls for heating systems - Part 7: Accompanying TR EN 12098-3:2022 - Modules M3-5,6,7,8

60.60 Standard published

CEN/TC 247

Validation testing program on chloride penetration and carbonation standardized test methods

60.60 Standard published

CEN/TC 104

Design of fibre-polymer composite structures

60.60 Standard published

CEN/TC 250

Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method

60.60 Standard published

CEN/TC 154

Energy performance of buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8

60.60 Standard published

CEN/TC 247

Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels

60.60 Standard published

CEN/TC 112

Energy performance of buildings - Method for calculation of the design heat load - Part 3: Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3

40.98 Project deleted

CEN/TC 228

Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification

40.60 Close of voting

CEN/TC 88

Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on power, control and communication cables

50.60 Close of voting. Proof returned by secretariat

CEN/TC 127

Fire resistance tests for service installations - Part 10: Smoke control dampers

60.60 Standard published

CEN/TC 127

Fire resistance tests for service installations - Part 13: Chimneys

30.98 Project deleted

CEN/TC 127

Solid wood panelling and cladding - Characteristics, requirements and marking

10.99 New project approved

CEN/TC 175

Extended application of test results for fire resistance and/or smoke control for doorsets, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows

60.60 Standard published

CEN/TC 127

Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties

40.98 Project deleted

CEN/TC 129

Extended application on the fire performance of construction products and building elements: Principle of EXAP standards and EXAP reports

50.60 Close of voting. Proof returned by secretariat

CEN/TC 127

Extended application of results from fire resistance tests for service installations - Part 2: Fire dampers

60.60 Standard published

CEN/TC 127

Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 2: Durability of self-closing of steel rolling shutters

60.60 Standard published

CEN/TC 127

Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 3: Durability of self-closing of steel sliding doorsets

60.60 Standard published

CEN/TC 127

Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes

40.60 Close of voting

CEN/TC 155

Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods

60.60 Standard published

CEN/TC 33

Glass in building - Shatter properties - Requirements and assessment methods

60.60 Standard published

CEN/TC 129

Construction products: Assessment of release of dangerous substances - Dose assessment of emitted gamma radiation

60.60 Standard published

CEN/TC 351

Sustainability of construction works - Environmental product declarations - Horizontal rules for business-to-consumer communication

60.60 Standard published

CEN/TC 350

Eurocode - Basis of structural and geotechnical design

60.55 Ratification completed (DOR)

CEN/TC 250

Eurocode 2 - Design of concrete structures - Part 4: Design of fastenings for use in concrete

20.60 Close of comment period

CEN/TC 250

Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings

60.60 Standard published

CEN/TC 250

Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures

60.60 Standard published

CEN/TC 250

Eurocode 9: Design of aluminium structures - Part 1-1: General rules

60.55 Ratification completed (DOR)

CEN/TC 250

Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design

60.55 Ratification completed (DOR)

CEN/TC 250

Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue

60.55 Ratification completed (DOR)

CEN/TC 250

Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting

60.55 Ratification completed (DOR)

CEN/TC 250

Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures

60.55 Ratification completed (DOR)

CEN/TC 250

Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention

60.55 Ratification completed (DOR)

CEN/TC 38

Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood

60.55 Ratification completed (DOR)

CEN/TC 38

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings

60.60 Standard published

CEN/TC 208

Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed particles in coarse and all-in natural aggregates

60.60 Standard published

CEN/TC 154

Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates

60.60 Standard published

CEN/TC 154

Fasteners - Hexalobular socket countersunk flat head screws (common head style) with reduced loadability (ISO 14581:2022)

60.60 Standard published

CEN/TC 185

Cleanrooms and associated controlled environments - Part 10: Assessment of surface cleanliness for chemical contamination (ISO 14644-10:2022)

60.60 Standard published

CEN/TC 243

Cleanrooms and associated controlled environments - Part 8: Assessment of air cleanliness by chemical concentration (ACC) (ISO 14644-8:2022)

60.60 Standard published

CEN/TC 243

Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022)

60.60 Standard published

CEN/TC 243

Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003/Amd 1:2016 + Cor 1:2004)

50.60 Close of voting. Proof returned by secretariat

CEN/TC 155

Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content - Amendment 1 (ISO 17892-1:2014/Amd 1:2022)

60.60 Standard published

CEN/TC 341

Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)

60.60 Standard published

CEN/TC 185

Building information models - Information delivery manual - Part 3: Data schema (ISO 29481-3:2022)

60.60 Standard published

CEN/TC 442

Fasteners - Button head screws with reduced loadability - Part 1: Hexagon socket button head screws (ISO 7380-1:2022)

60.60 Standard published

CEN/TC 185

Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2022)

60.60 Standard published

CEN/TC 185

Design of tensioned membrane structures

30.99 CD approved for registration as DIS

CEN/TC 250

Adhesives for ceramic tiles - Part 1: Essential characteristics and AVCP

60.55 Ratification completed (DOR)

CEN/TC 67

Curtain walling - Air permeability - Performance requirements and classification

45.99 Dispatch of FV draft to CCMC

CEN/TC 33

Curtain walling - Air permeability - Test method

45.99 Dispatch of FV draft to CCMC

CEN/TC 33

Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents

50.60 Close of voting. Proof returned by secretariat

CEN/TC 175

Wood-flooring and parquet - Multi-layer parquet elements

45.99 Dispatch of FV draft to CCMC

CEN/TC 175

Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for external thermal insulation composite kits with renders (ETIC kits)

45.99 Dispatch of FV draft to CCMC

CEN/TC 88

Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance and/or smoke control tests, excluding ventilation services

50.60 Close of voting. Proof returned by secretariat

CEN/TC 127

Screed material and floor screeds - Screed material - Properties and requirements

50.60 Close of voting. Proof returned by secretariat

CEN/TC 303

Textile floor coverings - Classification of carpet underlays

45.99 Dispatch of FV draft to CCMC

CEN/TC 134

Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)

45.99 Dispatch of FV draft to CCMC

CEN/TC 336

Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements

50.60 Close of voting. Proof returned by secretariat

CEN/TC 128

Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Part 1: Essential characteristics and AVCP

60.55 Ratification completed (DOR)

CEN/TC 67

Surfaces for sports areas - Multi-sports floor systems for indoor use - Part 1: Essential characteristics

50.60 Close of voting. Proof returned by secretariat

CEN/TC 217

Prefabricated accessories for roofing - Part 1: Continuous plastic rooflights - Product specification and test methods

45.99 Dispatch of FV draft to CCMC

CEN/TC 128

Lightweight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA)

45.99 Dispatch of FV draft to CCMC

CEN/TC 88

Power operated pedestrian doorsets - Safety in use - Requirements and test methods

45.99 Dispatch of FV draft to CCMC

CEN/TC 33

Painted glass for internal use - part 2: product standard

50.60 Close of voting. Proof returned by secretariat

CEN/TC 129

Modular mechanical locked floor coverings (MMF) - Specification, requirements and test method for multilayer modular panels for floating installation

50.20 Proof sent to secretariat or FDIS ballot initiated: 8 weeks

CEN/TC 134

Thermal insulation products for building - Factory made vegetal fibres based products (VFBP)

50.60 Close of voting. Proof returned by secretariat

CEN/TC 88

Fans - Safety requirements

50.98 Project deleted

CEN/TC 156

Clay blocks for concrete ribbed floor systems

45.99 Dispatch of FV draft to CCMC

CEN/TC 125

Prefabricated accessories for roofing - Individual plastic rooflights - Product specification and test methods

45.99 Dispatch of FV draft to CCMC

CEN/TC 128

Eurocode 1 - Actions on structures - Part 2: Traffic loads on bridges and other civil engineering works

45.99 Dispatch of FV draft to CCMC

CEN/TC 250

Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures

45.99 Dispatch of FV draft to CCMC

CEN/TC 250

Eurocode 2 – Design of concrete structures – Part 1-2: Structural fire design

45.99 Dispatch of FV draft to CCMC

CEN/TC 250

Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures

45.99 Dispatch of FV draft to CCMC

CEN/TC 250

Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures

45.99 Dispatch of FV draft to CCMC

CEN/TC 104

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 7: Assessment of conformity

30.99 CD approved for registration as DIS

CEN/TC 155

Plastics piping systems - Validated design parameters of buried thermoplastics piping systems

10.99 New project approved

CEN/TC 155

Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards

30.98 Project deleted

CEN/TC 371

Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape

40.60 Close of voting

CEN/TC 459/SC 3

Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)

40.60 Close of voting

CEN/TC 154

Adhesives for ceramic tiles - Part 3: Terminology, specifications, designation and marking

40.60 Close of voting

CEN/TC 67

Controls for heating systems - Part 1: Outside temperature compensated control equipment for hot water heating systems

30.97 End of interruption of work - split/merged

CEN/TC 247

Controls for heating systems - Part 3: Outside temperature compensated control equipment for electrical heating systems.

30.97 End of interruption of work - split/merged

CEN/TC 247

Slate and stone for discontinuous roofing and external cladding - Part 3: Specifications for schist and schistose stones

40.60 Close of voting

CEN/TC 128

Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels

10.99 New project approved

CEN/TC 112

Surfaces for sports areas - Determination of water infiltration rate

00.98 Proposal for new project abandoned

CEN/TC 217

Industrial, commercial and garage doors and gates - Safety devices - Requirements, classification and test methods.

00.98 Proposal for new project abandoned

CEN/TC 33

Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates

30.98 Project deleted

CEN/TC 127

Industrial, commercial and garage doors and gates - Product Standard - Part 2: Products with fire resistance or smoke control characteristics

10.99 New project approved

CEN/TC 33

Armourstone - Part 1:Characteristics

40.60 Close of voting

CEN/TC 154

Aggregates for railway ballast - Part 1: Characteristics

40.60 Close of voting

CEN/TC 154

Aggregates for railway ballast - Part 2: Complementary information

40.60 Close of voting

CEN/TC 154

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A

30.98 Project deleted

CEN/TC 155

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B

30.98 Project deleted

CEN/TC 155

Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on components of normal building service installations

40.60 Close of voting

CEN/TC 127

Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resistant ventilation ducts and fire dampers and or power, control and communication cables

40.98 Project deleted

CEN/TC 127

Fire resistance tests for service installations - Part 10: Smoke control dampers

45.98 End of interruption of work - abandoned

CEN/TC 127

Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact

30.98 Project deleted

CEN/TC 104

Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock

30.98 Project deleted

CEN/TC 104

Concrete pavements - Part 1: Materials

40.60 Close of voting

CEN/TC 227

Concrete pavements - Part 2: Functional requirements for concrete pavements

40.60 Close of voting

CEN/TC 227

Bitumen and bituminous binders - Specification framework for polymer modified bitumens

40.98 Project deleted

CEN/TC 336

Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods

30.98 Project deleted

CEN/TC 33

Factory-made double skin metal faced insulating sandwich panels - Part 1: Self-supporting applications

40.60 Close of voting

CEN/TC 128

Double skin metal faced insulating panels - Factory made products - Specifications - Part 2: Structural applications - Fixings and potential uses of stabilization of individual structural elements

40.60 Close of voting

CEN/TC 128

Bidets - Functional requirements and test methods

40.20 DIS ballot initiated: 12 weeks

CEN/TC 163

Execution of special geotechnical works - Deep mixing

10.99 New project approved

CEN/TC 288

Execution of special geotechnical works - Deep mixing

00.60 Close of review

CEN/TC 288

Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Part 2: Terminology, specifications, designation and marking

40.60 Close of voting

CEN/TC 67

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair

10.99 New project approved

CEN/TC 104

Anti-seismic devices - Part 6: Sliding isolators

40.98 Project deleted

CEN/TC 340

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems, Module M3-8-2, M8-8-2

40.98 Project deleted

CEN/TC 228

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7

40.98 Project deleted

CEN/TC 228

Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use

00.60 Close of review

CEN/TC 217

Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf

30.98 Project deleted

CEN/TC 217

Heating systems in buildings - Design of heat pumps for heating and cooling systems

30.98 Project deleted

CEN/TC 228

Sustainability of construction works - Data quality for environmental assessment of products and construction work - Selection and use of data

40.60 Close of voting

CEN/TC 350

Sustainability of construction works - Methodology for the assessment of performance of buildings - Part 1: Environmental Performance

40.60 Close of voting

CEN/TC 350

Construction products: Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps

40.60 Close of voting

CEN/TC 351

Construction products: Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test

40.60 Close of voting

CEN/TC 351

Construction products: Assessment of release of dangerous substances - Part 3: Horizontal up-flow percolation test

40.60 Close of voting

CEN/TC 351

Construction products: Assessment of release of dangerous substances - Terminology

40.60 Close of voting

CEN/TC 351

Plastics piping systems - Environmental product declarations - Product Category Rules complementary to EN 15804, for buried plastics piping systems

40.98 Project deleted

CEN/TC 155

Plastics piping systems - Environmental product declarations - Product Category rules complementary to EN 15804, for plastic piping systems inside buildings

40.98 Project deleted

CEN/TC 155

Thermal insulation products for buildings - Factory-made vacuum insulation panels (VIP) - Specification

40.60 Close of voting

CEN/TC 88

Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates

40.60 Close of voting

CEN/TC 351

Construction products: Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances

40.60 Close of voting

CEN/TC 351

Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by inductively coupled plasma optical emission spectrometry (ICP-OES)

40.60 Close of voting

CEN/TC 351

Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by inductively coupled plasma mass spectrometry (ICP-MS)

40.60 Close of voting

CEN/TC 351

Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests

40.60 Close of voting

CEN/TC 351

Construction products: Assessment of release of dangerous substances - Determination of radium-226, thorium-232 and potassium-40 activity using gamma-ray spectrometry

20.60 Close of comment period

CEN/TC 351

Permanent anchor devices and safety hooks

40.60 Close of voting

CEN/TC 128

Thermal insulation products for buildings - External thermal insulation composite kits with a rendering system (ETIC kits) - Characteristics

40.60 Close of voting

CEN/TC 88

Construction products: Assessment of release of dangerous substances - Content of organic substances - Methods for extraction and analysis

40.60 Close of voting

CEN/TC 351

Construction products: Assessment of release of dangerous substances - Analysis of organic substances in eluates

40.60 Close of voting

CEN/TC 351

Aggregates for construction works - Part 1: Characteristics

40.60 Close of voting

CEN/TC 154

Chimneys - Requirements for metal chimneys - Part 1: System chimney products

40.60 Close of voting

CEN/TC 166

Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes

40.60 Close of voting

CEN/TC 166

Eurocode 1 – Actions on structures – Part 1-2: Actions on structures exposed to fire

40.60 Close of voting

CEN/TC 250

Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings (Conversion into EN of ENV 1993-1-1:1992)

10.99 New project approved

CEN/TC 250

Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties

40.10 harmonizedStageCodeLabel.40.10

CEN/TC 250

Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components

20.60 Close of comment period

CEN/TC 250

Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design

40.60 Close of voting

CEN/TC 250

Eurocode 3 - Design of steel structures - Part 1-3: Cold-formed members and sheeting

40.60 Close of voting

CEN/TC 250

Eurocode 3 - Design of steel structures - Part 1-4: Stainless steel structures

40.10 harmonizedStageCodeLabel.40.10

CEN/TC 250

Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements

40.60 Close of voting

CEN/TC 250

Eurocode 3: Design of steel structures - Part 1-8: Design of joints

40.60 Close of voting

CEN/TC 250

Eurocode 3: Design of steel structures - Part 1-9: Fatigue

40.10 harmonizedStageCodeLabel.40.10

CEN/TC 250

Eurocode 3 - Design of steel structures - Part 2: Steel Bridges

20.60 Close of comment period

CEN/TC 250

Eurocode 6: Design of masonry structures - Part 1-1: General rules for buildings - Rules for reinforced and unreinforced masonry

20.60 Close of comment period

CEN/TC 250

Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design

40.60 Close of voting

CEN/TC 250

Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry

40.60 Close of voting

CEN/TC 250

Eurocode 7: Geotechnical design - Part 1: General rules

40.60 Close of voting

CEN/TC 250

Eurocode 7 - Geotechnical design - Part 2: Ground properties

40.60 Close of voting

CEN/TC 250

Eurocode 7: Geotechnical design - Part 3: Design assisted by field testing

10.99 New project approved

CEN/TC 250

Eurocode 7 - Geotechnical design - Part 3: Geotechnical structures

40.60 Close of voting

CEN/TC 250

Admixtures for concrete, mortar and grout - Part 15: Determination of corrosion current of steel in concrete by microcell electrochemical measurement

10.99 New project approved

CEN/TC 104

Corrugated bitumen sheets - Product specification and test methods

40.60 Close of voting

CEN/TC 128

Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods

40.60 Close of voting

CEN/TC 128

Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method

40.60 Close of voting

CEN/TC 154

Ceramic tiles -- Part 22: Determination of resistance to wear with a multi-attribute method

30.98 Project deleted

CEN/TC 67

Ceramic tiles -- Part 23: Tensile adhesion strength of multilayer tiles and tile adhesives

30.98 Project deleted

CEN/TC 67

Cleanrooms and associated controlled environments - Part 18: Assessment of suitability of consumables (ISO/DIS 14644-18:2022)

40.60 Close of voting

CEN/TC 243

Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships

30.98 Project deleted

CEN/TC 155

Thermal insulation products - Determination of ageing by settlement - Part 1: Blown loose fill insulation for ventilated attics simulating humidity and temperature cycling (ISO/DIS 18393-1:2022)

40.60 Close of voting

CEN/TC 88

ISO 19650-6: Organization and digitization of information about buildings and civil engineering works, including building information modelling -- Information management using building information modelling – Part 6: Health and Safety

10.99 New project approved

CEN/TC 442

Polyethylene (PE) materials for piping systems — Determination of the resistance to point loads — Test method

10.99 New project approved

CEN/TC 155

Determination of the behaviour under dynamic load of complete ceramic floor tiles installation systems

10.99 New project approved

CEN/TC 67

Fasteners - Hexagon regular nuts (style 1) (ISO/DIS 4032:2022)

45.99 Dispatch of FV draft to CCMC

CEN/TC 185

Fasteners - Hexagon high nuts (style 2) (ISO/DIS 4033:2022)

45.99 Dispatch of FV draft to CCMC

CEN/TC 185

Fasteners - Hexagon thin nuts (style 0) (ISO/DIS 4035:2022)

45.99 Dispatch of FV draft to CCMC

CEN/TC 185

Rubber and plastics hoses and hose assemblies - Determination of permeability to gas

10.99 New project approved

CEN/TC 218

Fasteners - Hexagon regular nuts (style 1), with fine pitch thread (ISO/DIS 8673:2022)

45.99 Dispatch of FV draft to CCMC

CEN/TC 185

Fasteners - Hexagon high nuts (style 2), with fine pitch thread (ISO/DIS 8674:2022)

45.99 Dispatch of FV draft to CCMC

CEN/TC 185

Fasteners - Hexagon thin nuts (style 0), with fine pitch thread (ISO/DIS 8675:2022)

45.99 Dispatch of FV draft to CCMC

CEN/TC 185

Grooved pins - Full-length parallel grooved, with pilot

10.99 New project approved

CEN/TC 185

Grooved pins - Full-length parallel grooved, with chamfer

10.99 New project approved

CEN/TC 185

Grooved pins - Half-length reverse-taper grooved

10.99 New project approved

CEN/TC 185

Grooved pins - One-third-length centre grooved

10.99 New project approved

CEN/TC 185

Grooved pins - Half-length centre grooved

10.99 New project approved

CEN/TC 185

Grooved pins - Full-length taper grooved

10.99 New project approved

CEN/TC 185

Grooved pins - Half-length taper grooved

10.99 New project approved

CEN/TC 185

Grooved pins with round head

10.99 New project approved

CEN/TC 185

Grooved pins with countersunk head

10.99 New project approved

CEN/TC 185