EN 620:2002/FprA1

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials EN 620:2002/FprA1

General information

50.60 Close of voting. Proof returned by secretariat   Oct 8, 2010

CEN

CEN/BT

European Norm

53.040.10   Conveyors

Scope

1.1 This European standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during operation and maintenance of fixed belt conveyors and systems as defined in 3.1 to 3.2.4 and designed for continuously conveying loose bulk materials from the loading point(s) to the unloading point(s). Requirements for electromagnetic compatibility are also covered.
1.2 This standard applies to use in ambient air temperatures of -15 °C to + 40 °C.
1.3 This standard does not cover:
a) use in open cast lignite mining or use underground, such as in mines or tunnels;
b) use in public areas or for man-riding;
c) floating, dredging and ship mounted equipment;
d) conveyors requiring a high level of cleanliness for hygiene reasons, e.g. in direct contact with foodstuffs or pharmaceuticals;
e) conveyors using a moving belt with other than a continuous rubber or polymeric surface for the conveying medium;
f) transportation of the conveyor;
g) the design of the supporting structure which is not part of a conveyor (see 3.2);
h) the effects of wind;
i) hazards resulting from handling specific hazardous materials, (e.g. explosives, radiating material);
j) hazards resulting from contact with or inhalation of harmful fluids, gases, mists, fumes or dust;
k) biological and micro-biological (viral or bacterial) hazards;
l) hazards due to heat radiation from the materials handled;
m) hazards caused by operation in electromagnetic fields outside the range of EN 61000-6-2: 1999;
n) hazards caused by operation subject to special regulations (e.g. explosive atmospheres);
o) hazards caused by noise;
p) hazards caused by the use of ionising radiation sources;
q) hazards caused by hydraulic equipment.
The safety requirements of this standard apply to equipment and systems placed on the market after the date of publication of this standard.

Related legislation

Legislation related to this standard

98/37/EC

Machinery

89/336/EEC

Electromagnetic compatibility (EMC)

2004/108/EC

Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC

Life cycle

PREVIOUSLY

WITHDRAWN
EN 620:2002

NOW

IN_DEVELOPMENT
EN 620:2002/FprA1
50.60 Close of voting. Proof returned by secretariat
Oct 8, 2010