EN 13417-3:2001

Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements

Publication date:   Oct 23, 2003

General information

90.93 Standard confirmed   Jun 19, 2017

CEN

CEN/TC 249 Plastics

European Norm

59.100.01   Materials for the reinforcement of composites in general

Buying

Published

Language in which you want to receive the document.

Scope

1.1 This Part 3 of EN 13417 defines a specification for woven fabrics made from continuous filament reinforcement yarns, tows and rovings, which may be used as the basis for specifications.
The specification defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.
1.2 The specification does not define absolute or nominal values for any parameter. The value of a specified parameter is to be defined by the manufacturer but this specification defines the method of test to be used to determine the value of each specified parameter and the tolerance about which the parameter shall be controlled by the manufacturer.
1.3 The parameters which shall always be defined in any woven reinforcement fabric specification are defined in 4.1. In 4.2 the manufacturer shall define other obligatory information to be included in the specification. Other parameters can be included in the specification by agreement between manufacture and customer. These parameters are defined in clause 4.3.

Life cycle

NOW

PUBLISHED
EN 13417-3:2001
90.93 Standard confirmed
Jun 19, 2017