DISCLAMER: This is an informative page, providing added value information on standards. Information may evolve and change subject to the publication of other legislative texts. Genorma.com informs their users that users are responsible for deciding the version of the standard that is applicable to their products, and not Genorma.com. As a consequence, Genorma.com users are encouraged to check the legal text accessible through the following link: https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX%3A32019D1616 and related pieces of legislation.
Date of document: 09/02/2021; Date of adoption
Date of effect: 10/02/2021; Entry into force Date pub. See Art 3
Date of end of validity: No end date
Classifications
marketing standard; technical specification; European standard; harmonisation of standards; product safety; safety standard; technical standard; pressure equipment; European Committee for Standardisation
Internal market - Principles
13.30.99.00 Industrial policy and internal market / Internal market: approximation of laws / Other sectors for approximation of laws
Author: European Commission, Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs
Responsible body: GROW
Form: Implementing decision
10.2.2021 | EN | Official Journal of the European Union | L 46/40
COMMISSION IMPLEMENTING DECISION (EU) 2021/157 of 9 February 2021
amending Implementing Decision (EU) 2019/1616 as regards industrial valves, welding procedures, equipment for refrigerating systems and heat pumps, shell boilers, metallic industrial piping, copper and copper alloys, LPG equipment and accessories and safety devices for protection against excessive pressure
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council (1), and in particular Article 10(6) thereof,
Whereas:
(1) In accordance with Article 12 of Directive 2014/68/EU of the European Parliament and of the Council (2), pressure equipment or assemblies referred to in Article 4(1) and (2) of that Directive which are in conformity with harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union, are to be presumed to be in conformity with the essential safety requirements covered by those standards or parts thereof referred to in Annex I to that Directive.
(2) By letter M/071 of 1 August 1994 the Commission made a request to the European Committee for Standardisation (CEN) for drawing up, in relation to the pressure equipment, the product related standards and the standards of a horizontal nature in support of Directive 97/23/EC of the European Parliament and of the Council (3). That Directive was replaced by Directive 2014/68/EU without changing the essential safety requirements referred to in Annex I to Directive 97/23/EC.
(3) On the basis of the request M/071 and in order to reflect the state of the art, CEN revised and amended some of the existing harmonised standards. Specifically, CEN revised harmonised standards EN ISO 4126-3:2006, EN 12542:2010 and EN 13175:2014 which resulted in adoption of harmonised standards EN ISO 4126-3:2020 on safety devices, EN 12542:2020 and EN 13175:2019+A1:2020 on LPG equipment and accessories; harmonised standard EN 12735-1:2016 which resulted in adoption of harmonised standard EN 12735-1:2020 on copper and copper alloys; and harmonised standard EN 12953-5:2002 which resulted in adoption of harmonised standard EN 12953-5:2020 on shell boilers. CEN also revised harmonised standards EN 14276-1:2006+A1:2011 and EN 14276-2:2007+A1:2011 which resulted in adoption of harmonised standards EN 14276-1:2020 and EN 14276-2:2020 on pressure equipment for refrigerating systems and heat pumps as well as harmonised standard EN ISO 15620:2000 which resulted in adoption of harmonised standard EN ISO 15620:2019 on welding.
(4) Additionally, CEN revised and amended a series of harmonised standards on industrial valves. Namely, CEN amended harmonised standards EN ISO 16135:2006, EN ISO 16136:2006, EN ISO 16137:2006, EN ISO 16138:2006, EN ISO 16139:2006 and EN ISO 21787:2006. CEN also revised the harmonised standard EN 16767:2016 which resulted in adoption of harmonised standard EN 16767:2020 on industrial valves.
(5) CEN also amended harmonised standards EN 13480-2:2017 and EN 13480-3:2017 on metallic industrial piping.
(6) The Commission together with CEN has assessed whether those standards on the pressure equipment as amended or revised by CEN comply with the request M/071.
(7) The standards on the pressure equipment as amended or revised by CEN satisfy the requirements which they aim to cover and which are referred to in Annex I to Directive 2014/68/EU. It is therefore appropriate to publish the references of those standards in the Official Journal of the European Union.
(8) References of amended or revised versions of standards EN 12542:2010, EN 12735-1:2016, EN 12953-5:2002, EN 13175:2014, EN 13480-2:2017, EN 13480-3:2017, EN 14276-1:2006+A1:2011, EN 14276-2:2007+A1:2011, EN 16767:2016, EN ISO 15620:2000, EN ISO 16135:2006, EN ISO 16136:2006, EN ISO 16137:2006, EN ISO 16138:2006, EN ISO 16139:2006, EN ISO 21787:2006 and EN ISO 4126-3:2006 are to be published. It is therefore necessary to withdraw from the Official Journal of the European Union (4) references of the standards EN 12542:2010, EN 12735-1:2016, EN 12953-5:2002, EN 13175:2014, EN 13480-3:2017, EN 14276-1:2006+A1:2011, EN 14276-2:2007+A1:2011, EN 16767:2016, EN ISO 15620:2000, EN ISO 16135:2006, EN ISO 16136:2006, EN ISO 16137:2006, EN ISO 16138:2006, EN ISO 16139:2006, EN ISO 21787:2006 and EN ISO 4126-3:2006.
(9) In order to give manufacturers sufficient time to adapt their products to the amended or revised versions of harmonised standards for industrial valves, welding procedures, equipment for refrigerating systems and heat pumps, shell boilers, metallic industrial piping, copper and copper alloys, LPG equipment and accessories and safety devices for protection against excessive pressure, it is necessary to defer the withdrawal of the references of those standards.
(10) Annex I to Commission Implementing Decision (EU) 2019/1616 (5) lists the references of harmonised standards drafted in support of Directive 2014/68/EU. The references of harmonised standards EN ISO 4126-3:2020, EN 12542:2020, EN 12735-1:2020, EN 12953-5:2020, EN 13175:2019+A1:2020, EN 13480-3:2017, EN 13480-3:2017/A2:2020, EN 13480-3:2017/A3:2020, EN 14276-1:2020, EN 14276-2:2020, EN ISO 15620:2019, EN ISO 16135:2006, EN ISO 16135:2006/A1:2019, EN ISO 16136:2006, EN ISO 16136:2006/A1:2019, EN ISO 16137:2006, EN ISO 16137:2006/A1:2019, EN ISO 16138:2006, EN ISO 16138:2006/A1:2019, EN ISO 16139:2006, EN ISO 16139:2006/A1:2019, EN 16767:2020, EN ISO 21787:2006 and EN ISO 21787:2006/A1:2019 should be included in that Annex.
(11) Annex II to Implementing Decision (EU) 2019/1616 lists the references of harmonised standards drafted in support of Directive 2014/68/EU that are withdrawn from the Official Journal of the European Union. The references of harmonised standards EN 12542:2010, EN 12735-1:2016, EN 12953-5:2002, EN 13175:2014, EN 13480-3:2017, EN 14276-1:2006+A1:2011, EN 14276-2:2007+A1:2011, EN 16767:2016, EN ISO 15620:2000, EN ISO 16135:2006, EN ISO 16136:2006, EN ISO 16137:2006, EN ISO 16138:2006, EN ISO 16139:2006, EN ISO 21787:2006 and EN ISO 4126-3:2006 should be included in that Annex.
(12) The reference of harmonised standard EN 13480-2:2017 and the references of its amendments EN 13480- 2:2017/A1:2018, EN 13480-2:2017/A2:2018 and EN 13480-2:2017/A3:2018 are included in Annex I to Implementing Decision (EU) 2019/1616. Further amendment has been made to standard EN 13480-2:2017. It is appropriate to replace the relevant entry in that Annex, adding the reference of amendment EN 13480-2:2017/A7:2020.
(13) Implementing Decision (EU) 2019/1616 should therefore be amended accordingly.
(14) Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication,
HAS ADOPTED THIS DECISION:
Annex I to Implementing Decision (EU) 2019/1616 is amended in accordance with Annex I to this Decision.
Annex II to Implementing Decision (EU) 2019/1616 is amended in accordance with Annex II to this Decision.
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
Done at Brussels, 9 February 2021.
For the Commission
The President
Ursula VON DER LEYEN
(1) OJ L 316, 14.11.2012, p. 12.
(2) Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment (OJ L 189, 27.6.2014, p. 164).
(3) Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment (OJ L 181, 9.7.1997, p. 1).
(4) OJ C 326, 14.9.2018, p. 94.
(5) Commission Implementing Decision (EU) 2019/1616 of 27 September 2019 on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council (OJ L 250, 30.9.2019, p. 95).
Annex I to Implementing Decision (EU) 2019/1616 is amended as follows:
(1) entry No 11 is replaced by the following:
No | Reference of the standard | Title of the standard
‘11. | EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials
| EN 13480-2:2017/A1:2018 |
| EN 13480-2:2017/A2:2018 |
| EN 13480-2:2017/A3:2018 |
| EN 13480-2:2017/A7:2020’ |
(2) the following entries are added:
No | Reference of the standard | Title of the standard
‘24. | EN ISO 4126-3:2020 | Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020)
| EN 12542:2020 | LPG equipment and accessories - Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 - Design and manufacture
| EN 12735-1:2020 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
| EN 12953-5:2020 | Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
| EN 13175:2019+A1:2020 | LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
| EN 13480-3:2017 | Metallic industrial piping - Part 3: Design and calculation
| EN 13480-3:2017/A2:2020 |
| EN 13480-3:2017/A3:2020 |
| EN 14276-1:2020 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
| EN 14276-2:2020 | Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
| EN ISO 15620:2019 | Welding - Friction welding of metallic materials (ISO 15620:2019)
| EN ISO 16135:2006 | Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
| EN ISO 16135:2006/A1:2019 |
| EN ISO 16136:2006 | Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
| EN ISO 16136:2006/A1:2019 |
| EN ISO 16137:2006 | Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
| EN ISO 16137:2006/A1:2019 |
| EN ISO 16138:2006 | Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
| EN ISO 16138:2006/A1:2019 |
| EN ISO 16139:2006 | Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
| EN ISO 16139:2006/A1:2019 |
| EN 16767:2020 | Industrial valves - Metallic check valves
| EN ISO 21787:2006 | Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
| EN ISO 21787:2006/A1:2019’ |
In Annex II to Implementing Decision (EU) 2019/1616, the following entries are added:
No | Reference of the standard | Title of the standard | Date of withdrawal
‘22. | EN 12542:2010 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m3 - Design and manufacture | 10 August 2022
| EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems | 10 August 2022
| EN 12953-5:2002 | Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler | 10 August 2022
| EN 13175:2014 | LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings | 10 August 2022
| EN 13480-3:2017 | Metallic industrial piping - Part 3: Design and calculation | 10 August 2022
| EN 14276-1:2006+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements | 10 August 2022
| EN 14276-2:2007+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements | 10 August 2022
| EN 16767:2016 | Industrial valves - Steel and cast iron check valves | 10 August 2022
| EN ISO 15620:2000 | Welding - Friction welding of metallic materials (ISO 15620:2000) | 10 August 2022
| EN ISO 16135:2006 | Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) | 10 August 2022
| EN ISO 16136:2006 | Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) | 10 August 2022
| EN ISO 16137:2006 | Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) | 10 August 2022
| EN ISO 16138:2006 | Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) | 10 August 2022
| EN ISO 16139:2006 | Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) | 10 August 2022
| EN ISO 21787:2006 | Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) | 10 August 2022
| EN ISO 4126-3:2006 | Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) | 10 August 2022’
See below to obtain relevant standards or to get information on these standards
LPG equipment and accessories - Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
60.60 Standard published
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
60.60 Standard published
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
60.60 Standard published
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
90.60 Close of review
Metallic industrial piping - Part 3: Design and calculation
99.60 Withdrawal effective
Metallic industrial piping - Part 3: Design and calculation
99.60 Withdrawal effective
Metallic industrial piping - Part 3: Design and calculation
99.60 Withdrawal effective
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
60.60 Standard published
Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
60.60 Standard published
Welding - Friction welding of metallic materials (ISO 15620:2019)
60.60 Standard published
Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
90.93 Standard confirmed
Industrial valves - Ball valves of thermoplastics materials - Amendment 1 (ISO 16135:2006/Amd 1:2019)
60.60 Standard published
Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
90.93 Standard confirmed
Industrial valves - Butterfly valves of thermoplastics materials - Amendment 1 (ISO 16136:2006/Amd 1:2019)
60.60 Standard published
Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
90.93 Standard confirmed
Industrial valves - Check valves of thermoplastics materials - Amendment 1 (ISO 16137:2006/Amd 1:2019)
60.60 Standard published
Industrial valves - Diaphragm valves of thermoplastics materials - Amendment 1 (ISO 16138:2006/Amd 1:2019)
60.60 Standard published
Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
90.93 Standard confirmed
Industrial valves - Gate valves of thermoplastics materials - Amendment 1 (ISO 16139:2006/Amd 1:2019)
60.60 Standard published
Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
90.93 Standard confirmed
Industrial valves - Globe valves of thermoplastics materials - Amendment 1 (ISO 21787:2006/Amd 1:2019)
60.60 Standard published
Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020)
60.60 Standard published
