Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
90.93 Standard confirmed
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
60.60 Standard published
Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions
90.93 Standard confirmed
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
90.93 Standard confirmed
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
90.93 Standard confirmed
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
60.60 Standard published
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
90.93 Standard confirmed
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
90.93 Standard confirmed
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships
90.93 Standard confirmed
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
60.60 Standard published
Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
90.60 Close of review
Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
60.60 Standard published
Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage
90.93 Standard confirmed
Playing field equipment - Portable and permanent socketed goals - Functional, safety requirements and test methods
90.93 Standard confirmed
Aerospace series - Screw, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235°C
90.93 Standard confirmed
Aerospace series - Wrenches and sockets, bi-hexagonal - Technical specification
90.93 Standard confirmed
Aerospace series - Sockets, bi-hexagonal - Technical Specification
60.60 Standard published
Aerospace series - Wrenches, splined, socket for pipe fittings - Technical specification
90.93 Standard confirmed
Radio-frequency connectors - Part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)
60.60 Standard published
Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA)
60.60 Standard published
Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA
60.60 Standard published
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
60.60 Standard published
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
60.60 Standard published
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
60.60 Standard published
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
60.60 Standard published
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
60.60 Standard published
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
60.60 Standard published
Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
60.60 Standard published
Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
60.60 Standard published
High-voltage cable plug and socket connections for medical X-ray equipment
60.60 Standard published
Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights
60.60 Standard published
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits
60.60 Standard published
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing
60.60 Standard published
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
60.60 Standard published
Ball and socket couplings of string insulator units - Dimensions
60.60 Standard published
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements
60.60 Standard published
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements
60.60 Standard published
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
60.60 Standard published
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 4: Switched socket-outlets with or without interlock
60.60 Standard published
Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC)
60.60 Standard published
Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation
60.60 Standard published
Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships
60.60 Standard published
Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019)
60.60 Standard published
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
60.60 Standard published
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997)
90.93 Standard confirmed
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
60.60 Standard published
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)
60.60 Standard published
Fasteners - Hexalobular socket countersunk flat head screws (common head style) with reduced loadability (ISO 14581:2022)
60.60 Standard published
Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)
60.60 Standard published
Hexalobular socket raised countersunk head screws (ISO 14584:2011)
60.60 Standard published
Hexalobular socket pan head tapping screws (ISO 14585:2011)
60.60 Standard published
Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
60.60 Standard published
Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)
60.60 Standard published
Hexagon socket head cap screws (ISO 4762:2004, Corrected version 2024-08)
90.93 Standard confirmed
Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015)
60.60 Standard published
Fasteners - Button head screws with reduced loadability - Part 1: Hexagon socket button head screws (ISO 7380-1:2022)
60.60 Standard published
Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2022)
60.60 Standard published
Microprocessor system BUS - 8-bit and 16-bit data (MULTIBUS I) - Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors
60.60 Standard published
Microprocessor system BUS - 8-bit and 16-bit data (MULTIBUS I) - Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors
60.60 Standard published
Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
60.60 Standard published
Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
60.60 Standard published
Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
60.60 Standard published
Ball and socket couplings of string insulator units - Dimensions
60.60 Standard published
Radio-frequency connectors - Part 23: Pin and socket connector for use with 3.5 mm rigid precision coaxial lines with inner diameter of outer conductor of 3.5 mm (0.1378 in)
60.60 Standard published
Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA)
60.60 Standard published
Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA
60.60 Standard published
Corrigendum 1 - Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements
60.60 Standard published
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements
60.60 Standard published
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
60.60 Standard published
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 4: Switched socket-outlets with or without interlock
60.60 Standard published
Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC)
60.60 Standard published
Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
60.60 Standard published
Corrigendum 1 - High-voltage cable plug and socket connections for medical X-ray equipment
60.60 Standard published
High-voltage cable plug and socket connections for medical X-ray equipment
60.60 Standard published
Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights
60.60 Standard published
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits
60.60 Standard published
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing
60.60 Standard published
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness
60.60 Standard published
Microprocessor system BUS I, 8-bit and 16-bit data (MULTIBUS I) — Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors
60.60 Standard published
Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS I) - Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors
60.60 Standard published
Corrigendum 1 - Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
60.60 Standard published
Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
60.60 Standard published
Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs
60.60 Standard published
Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular requirements for socket-outlets for appliances
60.60 Standard published
Plugs and socket-outlets for household and similar purposes - Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations
60.60 Standard published
Plugs and socket-outlets for household and similar purposes - Part 2-4: Particular requirements for plugs and socket-outlets for SELV
60.60 Standard published
Plugs and socket-outlets for household and similar purposes - Part 2-5: Particular requirements for adaptors
60.60 Standard published
Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations
60.60 Standard published
Corrigendum 1 - Amendment 1 - Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets
60.60 Standard published
Amendment 1 - Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets
60.60 Standard published
Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets
60.60 Standard published
Corrigendum 1 - Plugs and socket-outlets for household and similar purposes - Part 3-1: Particular requirements for socket-outlets incorporating USB power supply
60.60 Standard published
Plugs and socket-outlets for household and similar purposes - Part 3-1: Particular requirements for socket-outlets incorporating USB power supply
60.60 Standard published
IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
60.60 Standard published
IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c. and 20 A 125 V a.c.
60.60 Standard published
IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, a.c. and d.c.
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation
60.60 Standard published
Plugs, socket-outlets and ship couplers for high-voltage shore connection (HVSC) systems - Part 1: General requirements
60.60 Standard published
Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships
60.60 Standard published
Amendment 1 - Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
60.60 Standard published
Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
60.60 Standard published
Plugs, socket-outlets and couplers with arcuate contacts
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Dimensional compatibility description for configuration FF AC/DC contact-tube vehicle coupler
60.60 Standard published
Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
60.60 Standard published
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 4: Dimensional compatibility and interchangeability requirements for DC pin and contact-tube accessories for Class II or Class III applications
60.60 Standard published
Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 1: Plug and socket-outlet system for 2,6 kW
60.60 Standard published
Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres and telecom central offices - Part 2: Plug and socket-outlet system for 5,2 kW
60.60 Standard published
Fasteners — Hexagon socket countersunk head screws with reduced loadability
90.92 Standard to be revised
Assembly tools for screws and nuts — Sockets and wrenches for spline drive
90.93 Standard confirmed
Assembly tools for screws and nuts — Driving squares — Part 1: Driving squares for hand socket tools
90.93 Standard confirmed
Assembly tools for screws and nuts — Driving squares — Part 2: Driving squares for power socket tools
90.93 Standard confirmed
Hexagon socket head cap screws with metric fine pitch thread
90.93 Standard confirmed
Plastics piping systems — Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints — Test method for leaktightness and strength while subjected to bending and internal pressure
90.93 Standard confirmed
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
60.60 Standard published
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection
90.93 Standard confirmed
Fasteners — Hexalobular socket countersunk flat head screws (common head style) with reduced loadability
60.60 Standard published
Fasteners — Hexalobular socket countersunk head screws, high head
90.93 Standard confirmed
Hexalobular socket raised countersunk (oval) head tapping screws
90.93 Standard confirmed
Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets
90.20 Standard under periodical review
Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact)
90.20 Standard under periodical review
Steel wire ropes — Socketing procedures — Molten metal and resin socketing
90.93 Standard confirmed
Assembly tools for screws and nuts — Forged and tubular socket wrenches — Maximum outside head dimensions
90.60 Close of review
Assembly tools for screws and nuts — Machine-operated screwdriver bits — Part 3: Screwdriver bits for hexagon socket screws
90.60 Close of review
Reduction sleeves and extension sockets for tools with Morse taper shanks
90.93 Standard confirmed
Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets
90.93 Standard confirmed
Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets ("impact")
90.93 Standard confirmed
Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated sockets ("non-impact")
90.93 Standard confirmed
Assembly tools for screws and nuts — Hexagon socket screw keys
90.20 Standard under periodical review
Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Dimensions and tests
90.93 Standard confirmed
Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests
90.93 Standard confirmed
Assembly tools for screws and nuts — Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
90.93 Standard confirmed
Road vehicles — High-tension connections for ignition coils and distributors — Part 1: Socket-type
90.93 Standard confirmed
Spanners and wrenches — Spline drive ends for power socket wrenches
90.93 Standard confirmed
Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets
90.93 Standard confirmed
Agricultural vehicles — Mechanical connections on towed vehicles — Part 2: Coupling ring 40 with socket
90.93 Standard confirmed
Agricultural vehicles — Mechanical connections on towed vehicles — Part 2: Coupling ring 40 with socket — Technical Corrigendum 1
60.60 Standard published
Photography — Shutter cable release tip and socket — Dimensions
90.93 Standard confirmed
Assembly tools for screws and nuts — Four-way socket wrenches — Dimensions and torque test
90.60 Close of review
Assembly tools for screws and nuts — Wrench and socket openings — Tolerances for general use
90.20 Standard under periodical review
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 1: Metric series
90.93 Standard confirmed
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 2: Inch-based series
90.20 Standard under periodical review
Fasteners — Button head screws with reduced loadability — Part 1: Hexagon socket button head screws
60.60 Standard published
Fasteners — Button head screws with reduced loadability — Part 2: Hexagon socket button head screws with collar
60.60 Standard published
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
60.60 Standard published
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
90.93 Standard confirmed
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE)
90.20 Standard under periodical review
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)
90.93 Standard confirmed
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 4: Acrylonitrile/butadiene/styrene (ABS)
90.20 Standard under periodical review
Orthopaedic instruments — Drive connections — Part 1: Keys for use with screws with hexagon socket heads
90.93 Standard confirmed
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 6: DASH with server push and WebSockets
90.60 Close of review
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing
60.60 Standard published
Hand-held power tools — Impulse wrenches — Dimensions and tolerances of interface to power socket
90.60 Close of review
