Road restraint systems - Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
90.92 Standard to be revised
Protective gloves for motorcycle riders - Requirements and test methods
90.92 Standard to be revised
Protective footwear for motorcycle riders - Requirements and test methods
90.60 Close of review
Protective garments for motorcycle riders - Part 1: Test methods
60.60 Standard published
Protective garments for motorcycle riders - Part 2: Class AAA garments - Requirements
60.60 Standard published
Protective garments for motorcycle riders - Part 3: Class AA garments - Requirements
60.60 Standard published
Protective garments for motorcycle riders - Part 4: Class A garments - Requirements
60.60 Standard published
Protective garments for motorcycle riders - Part 5: Class B garments - Requirements
60.60 Standard published
Protective garments for motorcycle riders - Part 6: Class C garments - Requirements
60.60 Standard published
Lead acid starter batteries - Part 7: General requirements and methods of tests for motorcycle batteries
90.93 Standard confirmed
Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems (ISO 18243:2017)
60.60 Standard published
Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems - Amendment 1 (ISO 18243:2017/Amd 1:2020)
60.60 Standard published
Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2023)
60.60 Standard published
Lead-acid starter batteries - Part 7: General requirements and methods of test for motorcycle batteries
60.60 Standard published
Motorcycle tyres — Test methods for verifying tyre capabilities
90.92 Standard to be revised
Two-wheeled motorcycles — Positioning of lighting and light-signalling devices
90.93 Standard confirmed
Motorcycles — Methods for setting running resistance on a chassis dynamometer
90.93 Standard confirmed
Motorcycles — Methods for setting running resistance on a chassis dynamometer — Amendment 1
60.60 Standard published
Motorcycle and motorcycle-rider kinematics — Vocabulary — Amendment 1
60.60 Standard published
Two-wheeled motorcycles — Antilock braking systems (ABS) — Tests and measurement methods
90.93 Standard confirmed
Electrically propelled mopeds and motorcycles — Safety specifications — Part 1: On-board rechargeable energy storage system (RESS)
60.60 Standard published
Electrically propelled mopeds and motorcycles — Safety specifications — Part 2: Vehicle operational safety
60.60 Standard published
Electrically propelled mopeds and motorcycles — Safety specifications — Part 3: Electrical safety
60.60 Standard published
Battery-electric mopeds and motorcycles — Performance — Part 1: Reference energy consumption and range
90.93 Standard confirmed
Battery-electric mopeds and motorcycles — Performance — Part 2: Road operating characteristics
90.93 Standard confirmed
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 1: Definitions, symbols and general considerations
90.93 Standard confirmed
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 1: Definitions, symbols and general considerations — Amendment 1: MATD test helmet, ground impact, and injury costs
60.60 Standard published
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 2: Definition of impact conditions in relation to accident data
90.93 Standard confirmed
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 3: Motorcyclist anthropometric impact dummy
90.93 Standard confirmed
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 3: Motorcyclist anthropometric impact dummy — Amendment 1: MATD test helmet
60.60 Standard published
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 4: Variables to be measured, instrumentation and measurement procedures
90.93 Standard confirmed
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 5: Injury indices and risk/benefit analysis
90.93 Standard confirmed
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 5: Injury indices and risk/benefit analysis — Amendment 1: Ground impact and injury costs
60.60 Standard published
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 6: Full-scale impact-test procedures
90.93 Standard confirmed
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 6: Full-scale impact-test procedures — Amendment 1: MATD test helmet
60.60 Standard published
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
90.93 Standard confirmed
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests — Amendment 1: Ground impact
60.60 Standard published
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests — Amendment 2: Correlation factors
60.60 Standard published
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 8: Documentation and reports
90.93 Standard confirmed
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 8: Documentation and reports — Amendment 1: Ground impact and injury costs
60.60 Standard published
Motorcycle tyres — Measurement of tyre rolling circumference — Loaded new tyres
90.93 Standard confirmed
Motorcycles — Measurement methods for gaseous exhaust emissions during inspection or maintenance
90.20 Standard under periodical review
Motorcycles — Measurement methods for gaseous exhaust emissions during inspection or maintenance — Amendment 1
60.60 Standard published
Passenger car, truck, bus and motorcycle tyres — Methods of measuring rolling resistance
90.92 Standard to be revised
Electrically propelled mopeds and motorcycles — Test specifications and safety requirements for lithium-ion battery systems
90.92 Standard to be revised
Electrically propelled mopeds and motorcycles — Test specifications and safety requirements for lithium-ion battery systems — Amendment 1
60.60 Standard published
Electrically propelled mopeds and motorcycles — Safety requirements for conductive connection to an external electric power supply
60.60 Standard published
Motorcycles — Verification of total running resistance force during mode running on a chassis dynamometer
90.93 Standard confirmed
Motorcycles and mopeds — Communication between vehicle and external equipment for diagnostics — Diagnostic connector and related electrical circuits, specification and use
90.93 Standard confirmed
Motorcycles — Measurement method for evaporative emissions — Part 1: SHED test procedure
90.20 Standard under periodical review
Motorcycles — Measurement method for evaporative emissions — Part 2: Permeation test procedure
60.60 Standard published
Electrically propelled mopeds and motorcycles — Test method for evaluation of energy performance using motor dynamometer
60.60 Standard published
Lubricants, industrial oils and related products (class L) — Family E (internal combustion engine oils) — Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB)
90.93 Standard confirmed
Road vehicles — Functional safety — Part 12: Adaptation of ISO 26262 for motorcycles
90.92 Standard to be revised
Motorcycle tyres and rims (Code-designated series) — Part 1: Tyres
90.93 Standard confirmed
Motorcycle tyres and rims (Code-designated series) — Part 2: Tyre load ratings
90.93 Standard confirmed
Motorcycle tyres and rims (code-designated series) — Part 3: Rims
90.93 Standard confirmed
Motorcycle tyres and rims (metric series) — Part 1: Design guides
90.93 Standard confirmed
Motorcycle tyres and rims (metric series) — Part 2: Tyre dimensions and load-carrying capacities
90.93 Standard confirmed
Motorcycle tyres and rims (metric series) — Part 3: Range of approved rim contours
90.93 Standard confirmed
Motorcycle tyres and rims (Code-designated series) — Diameter codes 4 to 12 — Part 1: Tyres
90.93 Standard confirmed
Motorcycle tyres and rims (Code-designated series) — Diameter codes 4 to 12 — Part 2: Rims
90.93 Standard confirmed
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test requirements
60.60 Standard published
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions
90.92 Standard to be revised
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed
90.93 Standard confirmed
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed — Amendment 1
60.60 Standard published
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed — Amendment 2
60.60 Standard published
Road vehicles — Dimensions of two-wheeled mopeds and motorcycles — Terms and definitions
90.93 Standard confirmed
Road vehicles — Motorcycles and mopeds — Symbols for controls, indicators and tell-tales
60.60 Standard published
Road vehicles — Motorcycles and mopeds — Symbols for controls, indicators and tell-tales — Amendment 1
60.60 Standard published
Motorcycles — Measurement method for determining maximum speed
90.93 Standard confirmed
Motorcycles — Brakes and brake systems — Tests and measurement methods
90.93 Standard confirmed
Motorcycles and mopeds — Controls — Types, positions and functions
60.60 Standard published
Motorcycles — Measurement method for location of centre of gravity
90.93 Standard confirmed
Three-wheeled mopeds and motorcycles — Dimensions — Vocabulary
90.93 Standard confirmed
Two-wheeled motorcycles — Parking stability of side- and centre-stands
90.93 Standard confirmed
Motorcycles — Measurement of variation of dipped beam inclination as a function of load
90.93 Standard confirmed
Electric mopeds and motorcycles - Terminology and classification
60.60 Standard published
Road vehicles — Comparison between ISO 26262-12 and other parts of the ISO 26262 series to support motorcycle adaptation
60.60 Standard published
Motorcycles — Guideline for verification of total running resistance force during mode running on a chassis dynamometer
60.60 Standard published
Motorcycles — Consideration for use cases of ISO 26262-12 MSIL classification
60.60 Standard published
Electrically propelled mopeds and motorcycles — Test method for evaluating performance of regenerative braking systems
90.60 Close of review
