Fire hazard

Related standards or drafts

Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 106: Limited fire hazard sleeving - Operating temperatures - 30 °C to 105 °C - Product standard

60.60 Standard published

ASD-STAN

Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 108: Limited fire hazard sleeving - Operating temperatures - 65 °C to 150 °C - Product standard

60.60 Standard published

ASD-STAN

Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 204: Limited fire hazard identification sleeves - Operating Temperature range -40 °C to 105 °C - Product standard

60.60 Standard published

ASD-STAN

Aerospace series - Heat shrinkable moulded shapes - Part 101: Polyolefin, semi-rigid, limited fire hazard - Temperature range - 30 °C to 105 °C - Product standard

60.60 Standard published

ASD-STAN

Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame

60.60 Standard published

CLC/SR 48B

Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire

60.60 Standard published

CLC/SR 48B

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving

60.60 Standard published

CLC/SR 15

Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 11-20: Test flames - 500 W flame test method

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 11-20: Test flames - 500 W flame test method

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 8-1: Heat release - General guidance

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 9-1: Surface spread of flame - General guidance

60.60 Standard published

CLC/SR 89

Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance

60.60 Standard published

CLC/SR 15

Fire hazard testing - Part 11-11: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT)

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 6-1: Smoke obscuration - General guidance

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods

60.60 Standard published

CLC/SR 89

Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods

60.60 Standard published

CLC/SR 89

Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame

60.60 Standard published

TC 48/SC 48B

Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire

60.60 Standard published

TC 48/SC 48B

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving

60.60 Standard published

TC 15

Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method

60.60 Standard published

TC 89

Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test

60.60 Standard published

TC 89

Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines

60.60 Standard published

TC 89

Corrigendum 1 - Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods

60.60 Standard published

TC 89

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods

60.60 Standard published

TC 89

Fire hazard testing - Part 11-11: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source

60.60 Standard published

TC 89

Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment

60.60 Standard published

TC 89

Corrigendum 1 - Fire hazard testing - Part 11-20: Test flames - 500 W flame test method

60.60 Standard published

TC 89

Fire hazard testing - Part 11-20: Test flames - 500 W flame test method

60.60 Standard published

TC 89

Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering

60.60 Standard published

TC 89

Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance

60.60 Standard published

TC 89

Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods

60.60 Standard published

TC 89

Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method

60.60 Standard published

TC 89

Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance

60.60 Standard published

TC 89

Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance

60.60 Standard published

TC 89

Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods

60.60 Standard published

TC 89

Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines

60.60 Standard published

TC 89

Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids

60.60 Standard published

TC 89

Corrigendum 1 - Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

60.60 Standard published

TC 89

Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

60.60 Standard published

TC 89

Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT)

60.60 Standard published

TC 89

Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials

60.60 Standard published

TC 89

Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

60.60 Standard published

TC 89

Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products

60.60 Standard published

TC 89

Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance

60.60 Standard published

TC 89

Fire hazard testing - Part 6-1: Smoke obscuration - General guidance

60.60 Standard published

TC 89

Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods

60.60 Standard published

TC 89

Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance

60.60 Standard published

TC 89

Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods

60.60 Standard published

TC 89

Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results

60.60 Standard published

TC 89

Fire hazard testing - Part 8-1: Heat release - General guidance

60.60 Standard published

TC 89

Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods

60.60 Standard published

TC 89

Fire hazard testing - Part 9-1: Surface spread of flame - General guidance

60.60 Standard published

TC 89

Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods

60.60 Standard published

TC 89

Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance

60.60 Standard published

TC 15

Fire hazard testing - Part 11-30: Test flames - History and development from 1979 to 1999

60.60 Standard published

TC 89

Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials

60.60 Standard published

TC 89

Fire hazard testing - Part 11-40: Test flames - Confirmatory tests - Guidance

60.60 Standard published

TC 89

Fire hazard testing - Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products

60.60 Standard published

TC 89

Fire hazard testing - Part 2-20: Glowing/hot-wire based test methods - Hot-wire ignition test (HWI) method - Apparatus, verification, test method and guidance

60.60 Standard published

TC 89

Fire hazard testing - Part 2-21: Glowing/hot-wire based test methods - Fire containment test on finished units

60.60 Standard published

TC 89

Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent - Summary and relevance of test methods

60.60 Standard published

TC 89

Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment — Part 1: Criteria

90.93 Standard confirmed

ISO/TC 92/SC 3

Uses of reaction to fire test results — Part 2: Fire hazard assessment of construction products

90.93 Standard confirmed

ISO/TC 92/SC 1

Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment — Part 2: Evaluation of individual physical fire models

60.60 Standard published

ISO/TC 92/SC 3

Textiles — Design of apparel for reduced fire hazard

60.60 Standard published

ISO/TC 38