Sport, training and Leisure


Technical committee




Sports

Sports and other recreational facilities and equipment - Injury and safety definitions and thresholds - Guidelines for their inclusion in standards (ISO/TR 20183:2015)

60.60 Standard published

CEN/TC 136

Surfaces for sports areas - Synthetic turf sports facilities - Guidance on how to minimize infill dispersion into the environment

60.60 Standard published

CEN/TC 217

Surfaces for sports areas - Determination of resistance of synthetic sports surfaces to repeated impact

90.93 Standard confirmed

CEN/TC 217

Surface for sports areas - Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athlete

90.92 Standard to be revised

CEN/TC 217

Light and lighting - Sports lighting

60.60 Standard published

CEN/TC 169

Surfaces for sports areas - Determination of joint strength of synthetic surfaces

90.93 Standard confirmed

CEN/TC 217

Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces

90.93 Standard confirmed

CEN/TC 217

Surfaces for sports areas - Test method for the determination of tensile properties of synthetic sports surfaces

60.60 Standard published

CEN/TC 217

Surfaces for sports areas - Method of test - Determination of ground cover of natural turf

90.93 Standard confirmed

CEN/TC 217

Surfaces for sports areas - Determination of thatch depth of natural turf

90.93 Standard confirmed

CEN/TC 217

Surfaces for sports areas - Determination of sward height of natural turf

90.60 Close of review

CEN/TC 217

Surfaces for sports areas - Determination of ball roll behaviour

90.92 Standard to be revised

CEN/TC 217

Surfaces for sports areas - Determination of vertical ball behaviour

90.60 Close of review

CEN/TC 217

Sports mats - Part 1: Gymnastic mats, safety requirements

90.93 Standard confirmed

CEN/TC 136

Sports mats - Part 2: Pole vault and high jump mats, safety requirements

90.60 Close of review

CEN/TC 136

Sports mats - Part 3: Judo mats, safety requirements

90.60 Close of review

CEN/TC 136

Sports mats - Part 4: Determination of shock absorption

90.60 Close of review

CEN/TC 136

Sports mats - Part 5: Determination of the base friction

90.60 Close of review

CEN/TC 136

Sports mats - Part 6: Determination of the top friction

90.60 Close of review

CEN/TC 136

Sports mats - Part 7: Determination of static stiffness

90.60 Close of review

CEN/TC 136

Surfaces for sports areas - Test methods for the determination of vertical water infiltration and horizontal water flow rates

60.60 Standard published

CEN/TC 217

Roller sports equipment - Skateboards - Safety requirements and tests methods

90.60 Close of review

CEN/TC 136

Surfaces for sports areas - Determination of resistance to abrasion of non-filled synthetic turf

90.93 Standard confirmed

CEN/TC 217

Surfaces for sports areas - Procedure for accelerated ageing by immersion in hot water

90.93 Standard confirmed

CEN/TC 217

Surfaces for sports areas - Determination of specular reflectance

90.93 Standard confirmed

CEN/TC 217

Surfaces for sports areas - Determination of dimensional changes due to the effect of varied water, frost and heat conditions

90.93 Standard confirmed

CEN/TC 217

Surfaces for sports areas - Procedure for accelerated ageing by exposure to hot air

90.92 Standard to be revised

CEN/TC 217

Roller sports equipment - Inline-skates - Safety requirements and test methods

90.60 Close of review

CEN/TC 136

Helmets for canoeing and white water sports

90.20 Standard under periodical review

CEN/TC 158

Surfaces for sports areas - Determination of tensile strength of synthetic yarns

90.60 Close of review

CEN/TC 217

Surfaces for sports areas - Determination of angled ball behaviour - Tennis

90.60 Close of review

CEN/TC 217

Surfaces for sports areas - Determination of angled ball behaviour - Tennis

60.60 Standard published

CEN/TC 217

Roller sports equipment - Roller skates - Safety requirements and test methods

90.93 Standard confirmed

CEN/TC 136

Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods

90.60 Close of review

CEN/TC 162

Roller sports equipment - Kick scooters - Safety requirements and test methods

60.60 Standard published

CEN/TC 136

Surfaces for sports areas - Determination of shock absorption

90.60 Close of review

CEN/TC 217

Surfaces for sports areas - Determination of vertical deformation

90.60 Close of review

CEN/TC 217

Surfaces for sports areas - Determination of vertical deformation

60.60 Standard published

CEN/TC 217

Surfaces for sports areas - Determination of spike resistance

90.60 Close of review

CEN/TC 217

Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test method for artificial weathering

60.60 Standard published

CEN/TC 217

Synthetic surfaces for outdoor sports areas - Specification

90.93 Standard confirmed

CEN/TC 217

Surfaces for sports areas - Multi-sports floor systems for indoor use - Test method for determination of rotational friction

60.60 Standard published

CEN/TC 217

Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification

60.60 Standard published

CEN/TC 217

Surfaces for sports areas - Determination of water absorption of unbound minerals

90.60 Close of review

CEN/TC 217

Surfaces for sport areas - Determination of thickness of unbound mineral surfaces for outdoor sports areas

90.60 Close of review

CEN/TC 217

Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas

90.60 Close of review

CEN/TC 217

Surfaces for sports areas - Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas

90.60 Close of review

CEN/TC 217

Surfaces for sports areas - Determination of water content of unbound mineral surfaces for outdoor sports areas

90.60 Close of review

CEN/TC 217

Surfaces for sports areas - Determination of resistance to indentation

90.93 Standard confirmed

CEN/TC 217

Surfaces for sports areas - Determination of resistance to impact

60.60 Standard published

CEN/TC 217

Surfaces for sports areas - Part 1: Determination of rotational resistance

90.92 Standard to be revised

CEN/TC 217

Surfaces for sports areas - Part 2: Determination of shear strength by dynamic top layer testing of unbound mineral surfaces in the laboratory

90.20 Standard under periodical review

CEN/TC 217

Surfaces for outdoor sports areas - Exposure of synthetic turf to simulated wear

90.60 Close of review

CEN/TC 217

Free access multi-sports equipment - Requirements, including safety and test methods

90.92 Standard to be revised

CEN/TC 136

Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use

60.60 Standard published

CEN/TC 217

Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces

90.60 Close of review

CEN/TC 217

Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 4: Specification for shockpads used with synthetic turf, needle-punch and textile sports surfaces

60.60 Standard published

CEN/TC 217

Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports

90.60 Close of review

CEN/TC 261

Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements

90.00 Start of review/2 Year Review Enquiry

CEN/TC 136

Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements

90.60 Close of review

CEN/TC 136

Knee and elbow protectors for indoor sports - Safety requirements and test methods

90.93 Standard confirmed

CEN/TC 162

Surfaces for sports areas - Determination of the behaviour under a rolling load

60.60 Standard published

CEN/TC 217

Surfaces for sports areas - Determination of linear shoe/surface friction

60.60 Standard published

CEN/TC 217

Sports and recreational equipment - Parkour equipment - Safety requirements and test methods

90.60 Close of review

CEN/TC 136

Surfaces for sports areas - Test method for the determination of the resistance to dynamic fatigue of shock pads and sports surfaces

60.60 Standard published

CEN/TC 217

Surfaces for sports areas - Determination of dimensional stability of shock pads used within sports systems

60.60 Standard published

CEN/TC 217

Surfaces for sports areas - Code of practice for the sampling of performance infills used within synthetic turf surfaces

60.60 Standard published

CEN/TC 217

Surfaces for sports areas - Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH)

60.60 Standard published

CEN/TC 217

Doping prevention in sport - Good development and manufacturing practices aimed at preventing the presence of prohibited substances in food intended for sportspeople and food supplements

60.60 Standard published

CEN/TC 453

Surfaces for sports areas - Test method for the determination of the residual deformation of synthetic or organic infill granules after static load

60.60 Standard published

CEN/TC 217

Surfaces for sports areas - Determination of thickness of synthetic sports surfaces

90.93 Standard confirmed

CEN/TC 217

Helmets for airborne sports

90.20 Standard under periodical review

CEN/TC 158

Wearable electronic devices and technologies - Part 204-1: Electronic textile - Test method for assessing washing durability of leisurewear and sportswear e-textile systems

60.60 Standard published

CLC/SR 124

Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)

60.60 Standard published

CEN/TC 85

Eye and face protection for sports use - Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021)

60.60 Standard published

CEN/TC 85

Sports and recreational facilities - Trampoline parks - Safety requirements (ISO 23659:2022)

60.60 Standard published

CEN/TC 136

Winter-sports equipment — Test devices for the setting of the functional unit ski/boot/binding — Requirements and tests

90.93 Standard confirmed

ISO/TC 83/SC 4

Winter-sports equipment — Marking of parts made of polymer materials

90.20 Standard under periodical review

ISO/TC 83/SC 4

Eye and face protection for sports use — Part 1: Requirements for downhill skiing and snowboarding goggles

60.60 Standard published

ISO/TC 94/SC 6

Eye and face protection for sports use — Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57

60.60 Standard published

ISO/TC 94/SC 6

Eye and face protection for sports use — Part 3: Requirements and test methods for eyewear intended to be used for surface swimming

60.60 Standard published

ISO/TC 94/SC 6

Sports and recreational facilities — Trampoline parks — Safety requirements

60.60 Standard published

ISO/TC 83

Sports and recreational facilities — Impact surfacing testing device

60.60 Standard published

ISO/TC 83

Sports and other recreational facilities and equipment — Injury and safety definitions and thresholds — Guidelines for their inclusion in standards

60.60 Standard published

ISO/TC 83

Sports and recreational facilities — Probes for entrapment/entanglement on playground equipment — Collection of data

90.92 Standard to be revised

ISO/TC 83



Training

Cosmetics - Good Manufacturing Practices - General training document (ISO/TR 24475:2010)

60.60 Standard published

CEN/TC 392

Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019)

60.60 Standard published

CEN/TC 138

Non-destructive testing - NDT personnel training organizations (ISO/TS 25108:2018)

60.60 Standard published

CEN/TC 138

Curriculum for training ICT Professionals in Universal Design

60.60 Standard published

CEN/WS UDP

Guidelines for dual-based training systems

60.60 Standard published

CEN/WS DTS

Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces

90.93 Standard confirmed

CEN/TC 168

Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces

60.60 Standard published

CEN/TC 168

Biotechnology - Large-scale process and production - Guidance for good practice, procedures, training and control for personnel

90.93 Standard confirmed

CEN/TC 233

Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use

60.60 Standard published

CEN/TC 217

Tourism services - Requirements for the provision of professional tourist guide training and qualification programmes

90.60 Close of review

CEN/TC 329

Professional indoor UV exposure services - Part 1: Requirements for the provision of training

90.93 Standard confirmed

CEN/TC 412

LPG equipment and accessories - Automotive LPG vehicles workshops - Part 2: Personnel competence and training

60.60 Standard published

CEN/TC 286

Health risk assessment of chemicals - Requirements for the provision of training

90.93 Standard confirmed

CEN/TC 416

Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials - Section 1: Copper/Invar/copper

60.60 Standard published

CLC/SR 91

Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification

60.60 Standard published

ASD-STAN

Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods

90.60 Close of review

CEN/TC 136

Recreational diving services - Requirements for gas blender training programmes (ISO 13293:2012)

60.60 Standard published

CEN/TC 329

Stationary training equipment - Part 1: General safety requirements and test methods (ISO 20957-1:2013)

60.60 Standard published

CEN/TC 136

Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel - Additional specific safety requirements and test methods (ISO 20957-10:2017)

60.60 Standard published

CEN/TC 136

Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods (ISO 20957-2:2020)

60.60 Standard published

CEN/TC 136

Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods (ISO 20957-4:2016)

60.60 Standard published

CEN/TC 136

Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods (ISO 20957-5:2016)

60.60 Standard published

CEN/TC 136

Stationary training equipment - Part 7: Rowing equipment, additional specific safety requirements and test methods (ISO 20957-7:2020)

60.60 Standard published

CEN/TC 136

Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods (ISO 20957-8:2017)

60.60 Standard published

CEN/TC 136

Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016)

60.60 Standard published

CEN/TC 136

Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods - Amendment 1 (ISO 20957-9:2016/Amd 1:2019)

60.60 Standard published

CEN/TC 136

Recreational diving services - Requirements for training on environmental awareness for recreational divers (ISO 21417:2019)

60.60 Standard published

CEN/TC 329

Nuclear criticality safety - Nuclear criticality safety training for operations (ISO 23133:2021)

60.60 Standard published

CEN/TC 430

Recreational diving services - Requirements for the training of recreational scuba divers - Part 1: Level 1 - Supervised diver (ISO 24801-1:2014)

60.60 Standard published

CEN/TC 329

Recreational diving services - Requirements for the training of recreational scuba divers - Part 2: Level 2 - Autonomous diver (ISO 24801-2:2014)

60.60 Standard published

CEN/TC 329

Recreational diving services - Requirements for the training of recreational scuba divers - Part 3: Level 3 - Dive leader (ISO 24801-3:2014)

60.60 Standard published

CEN/TC 329

Recreational diving services - Requirements for the training of scuba instructors - Part 1: Level 1 (ISO 24802-1:2014)

60.60 Standard published

CEN/TC 329

Recreational diving services - Requirements for the training of scuba instructors - Part 2: Level 2 (ISO 24802-2:2014)

60.60 Standard published

CEN/TC 329

Recreational diving services - Requirements for rebreather diver training - No-decompression diving (ISO 24804:2022)

60.60 Standard published

CEN/TC 329

Recreational diving services - Requirements for rebreather diver training - Decompression diving to 45 m (ISO 24805:2022)

60.60 Standard published

CEN/TC 329

Sensory analysis - General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors (ISO 8586:2012, Corrected version 2014-06-15)

60.60 Standard published

CEN/BT

Information technology - Learning, education and training - Metadata for learning resources - Part 1: Framework (ISO/IEC 19788-1:2011)

60.60 Standard published

CEN/TC 353

Information technology - Learning, education and training - Metadata for learning resources - Part 2: Dublin Core elements (ISO/IEC 19788-2:2011)

60.60 Standard published

CEN/TC 353

Information technology - Learning, education and training - Metadata for learning resources - Part 3: Basic application profile (ISO/IEC 19788-3:2011)

60.60 Standard published

CEN/TC 353

Information technology - Learning, education and training - Metadata for learning resources - Part 5: Educational elements (ISO/IEC 19788-5:2012)

60.60 Standard published

CEN/TC 353

Information technology - Learning, education and training - Quality management, assurance and metrics - Part 1: General approach (ISO/IEC 19796-1:2005)

60.60 Standard published

CEN/TC 353

Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials - Section 1: Copper/invar/copper

60.60 Standard published

TC 91

Animal (mammal) traps — Part 5: Methods for testing restraining traps

90.60 Close of review

ISO/TC 191

Recreational diving services — Requirements for training programmes on enriched air nitrox (EAN) diving

90.93 Standard confirmed

ISO/TC 228

Recreational diving services — Requirements for gas blender training programmes

90.93 Standard confirmed

ISO/TC 228

Sensory analysis — General guidance for the staff of a sensory evaluation laboratory — Part 2: Recruitment and training of panel leaders

90.93 Standard confirmed

ISO/TC 34/SC 12

Recreational diving services — Requirements for the training of recreational snorkelling guides

90.60 Close of review

ISO/TC 228

Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process

90.20 Standard under periodical review

ISO/TC 108/SC 5

Mobile elevating work platforms — Operator (driver) training

90.60 Close of review

ISO/TC 214

Stationary training equipment — Part 1: General safety requirements and test methods

90.92 Standard to be revised

ISO/TC 83

Stationary training equipment — Part 10: Exercise bicycles with a fixed wheel or without freewheel — Additional specific safety requirements and test methods

90.60 Close of review

ISO/TC 83

Stationary training equipment — Part 2: Strength training equipment, additional specific safety requirements and test methods

90.92 Standard to be revised

ISO/TC 83

Stationary training equipment — Part 4: Strength training benches, additional specific safety requirements and test methods

90.93 Standard confirmed

ISO/TC 83

Stationary training equipment — Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods

90.93 Standard confirmed

ISO/TC 83

Stationary training equipment — Part 6: Treadmills, additional specific safety requirements and test methods

60.60 Standard published

ISO/TC 83

Stationary training equipment — Part 7: Rowing equipment, additional specific safety requirements and test methods

90.92 Standard to be revised

ISO/TC 83

Stationary training equipment — Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods

90.60 Close of review

ISO/TC 83

Stationary training equipment — Part 9: Elliptical trainers, additional specific safety requirements and test methods

90.93 Standard confirmed

ISO/TC 83

Stationary training equipment — Part 9: Elliptical trainers, additional specific safety requirements and test methods — Amendment 1

60.60 Standard published

ISO/TC 83

Recreational diving services — Requirements for training on environmental awareness for recreational divers

60.60 Standard published

ISO/TC 228

Milk and milk products — Sensory analysis — Part 1: General guidance for the recruitment, selection, training and monitoring of assessors

90.92 Standard to be revised

ISO/TC 34/SC 5

Railway applications — Driving simulator for drivers' training

60.60 Standard published

ISO/TC 269/SC 3

Nuclear criticality safety — Nuclear criticality safety training for operations

60.60 Standard published

ISO/TC 85/SC 5

Unmanned aircraft systems — Training for personnel involved in UAS operations

90.92 Standard to be revised

ISO/TC 20/SC 16

Rough-terrain trucks — Operator training — Content and methods

60.60 Standard published

ISO/TC 110/SC 4

Ships and marine technology — Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear — Part 1: General requirements for training providers

60.60 Standard published

ISO/TC 8/SC 1

Ships and marine technology — Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear — Part 2: Service personnel initial training

60.60 Standard published

ISO/TC 8/SC 1

Ships and marine technology — Service personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear — Part 3: Level 1 technical training

60.60 Standard published

ISO/TC 8/SC 1

Cranes — Training of appointed persons

90.93 Standard confirmed

ISO/TC 96/SC 5

Cranes — Training of slingers and signallers

90.92 Standard to be revised

ISO/TC 96/SC 5

Recreational diving services — Requirements for the training of recreational scuba divers — Part 1: Level 1 — Supervised diver

90.93 Standard confirmed

ISO/TC 228

Recreational diving services — Requirements for the training of recreational scuba divers — Part 2: Level 2 — Autonomous diver

90.93 Standard confirmed

ISO/TC 228

Recreational diving services — Requirements for the training of recreational scuba divers — Part 3: Level 3 — Dive leader

90.93 Standard confirmed

ISO/TC 228

Recreational diving services — Requirements for the training of scuba instructors — Part 1: Level 1

90.93 Standard confirmed

ISO/TC 228

Recreational diving services — Requirements for the training of scuba instructors — Part 2: Level 2

90.93 Standard confirmed

ISO/TC 228

Recreational diving services — Requirements for rebreather diver training — No-decompression diving

60.60 Standard published

ISO/TC 228

Recreational diving services — Requirements for rebreather diver training — Decompression diving to 45 m

60.60 Standard published

ISO/TC 228

Ships and marine technology — Virtual reality and simulation training systems for lifesaving appliances and arrangements

60.60 Standard published

ISO/TC 8/SC 1

Sensory analysis — Methodology — Initiation and training of assessors in the detection and recognition of odours

90.93 Standard confirmed

ISO/TC 34/SC 12

Sensory analysis — Methodology — Initiation and training of assessors in the detection and recognition of odours — Amendment 1

60.60 Standard published

ISO/TC 34/SC 12

Earth-moving machinery — Operator training — Content and methods

90.93 Standard confirmed

ISO/TC 127/SC 3

Earth-moving machinery — Operation and maintenance — Training of mechanics

90.93 Standard confirmed

ISO/TC 127/SC 3

Sensory analysis — General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors

90.92 Standard to be revised

ISO/TC 34/SC 12

Cranes — Training of drivers — Part 1: General

90.93 Standard confirmed

ISO/TC 96/SC 5

Cranes — Training of operators — Part 3: Tower cranes

90.93 Standard confirmed

ISO/TC 96/SC 7

Information technology — Learning, education, and training — Content packaging — Part 1: Information model

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education, and training — Content packaging — Part 1: Information model — Technical Corrigendum 1

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Learning, education, and training — Content packaging — Part 2: XML binding

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology for learning, education, and training — Learner mobility achievement information (LMAI)

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Collaborative technology — Collaborative workplace — Part 1: Collaborative workplace data model

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Collaborative technology — Collaborative workplace — Part 2: Collaborative environment data model

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Collaborative technology — Collaborative workplace — Part 3: Collaborative group data model

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Collaborative technology — Collaborative learning communication — Part 1: Text-based communication

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Metadata for learning resources — Part 1: Framework

90.92 Standard to be revised

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Metadata for learning resources — Part 1: Framework — Amendment 1

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Metadata for learning resources — Part 2: Dublin Core elements

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Metadata for learning resources — Part 2: Dublin Core elements — Amendment 1: Non-literal content value data elements

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Metadata for learning resources — Part 3: Basic application profile

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Metadata for learning resources — Part 3: Basic application profile — Amendment 1

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Metadata for learning resources — Part 4: Technical elements

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Metadata for learning resources — Part 5: Educational elements

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Metadata for learning resources — Part 7: Bindings

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Metadata for learning resources — Part 8: Data elements for MLR records

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Metadata for learning resources — Part 9: Data elements for persons

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Quality management, assurance and metrics — Part 3: Reference methods and metrics

90.20 Standard under periodical review

ISO/IEC JTC 1/SC 36

Information technology for learning, education and training — Information model for competency — Part 1: Competency general framework and information model

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology for learning, education and training — Information model for competency — Part 2: Proficiency level information model

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology for learning, education and training — Reference framework of e-Portfolio information

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology for learning, education and training — Language accessibility and human interface equivalencies (HIEs) in e-learning applications — Part 1: Framework and reference model for semantic interoperability

90.92 Standard to be revised

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Competency models expressed in MLR

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology for learning, education and training — Ubiquitous learning resource organization and description framework

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Learning, education, and training — Metadata for facilitators of online learning — Part 1: Framework

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Vocabulary — Part 36: Learning, education and training

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Individualized adaptability and accessibility in e-learning, education and training — Part 1: Framework and reference model

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Individualized adaptability and accessibility in e-learning, education and training — Part 2: "Access for all" personal needs and preferences for digital delivery

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Individualized adaptability and accessibility in e-learning, education and training — Part 3: "Access for all" digital resource description

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Individualized adaptability and accessibility in e-learning, education and training — Part 4: "Access for all" framework for individualized accessibility and registry server application programming interface (API)

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology for learning, education and training — Nomadicity and mobile technologies

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Identification of privacy protection requirements pertaining to learning, education and training (LET) — Part 1: Framework and reference model

90.92 Standard to be revised

ISO/IEC JTC 1/SC 36

Information technology — Quality for learning, education and training — Fundamentals and reference framework

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education, and training — Content packaging — Part 3: Best practice and implementation guide

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education, and training — Requirements for e-textbooks in education

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Virtual experiment framework

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Metadata for learning resources — Part 11: Migration from LOM to MLR

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology for learning, education and training — Learning analytics interoperability — Part 1: Reference model

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology for learning, education and training — Learning analytics interoperability — Part 2: System requirements

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Learning environment components for automated contents adaptation

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology for learning, education and training — Human factor guidelines for virtual reality content — Part 1: Considerations when using VR content

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology for learning, education, and training — Human factor guidelines for virtual reality content — Part 2: Considerations when making VR content

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology for learning, education and training — Catalogue model for virtual, augmented and mixed reality content

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology for learning, education, and training — Immersive content and technology

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology — Learning, education and training — Conceptual Reference Model for Competency Information and Related Objects

90.93 Standard confirmed

ISO/IEC JTC 1/SC 36

Information technology — Process assessment — Framework for assessor training

60.60 Standard published

ISO/IEC JTC 1/SC 7

Information technology for learning, education and training — Reference model for information and communications technology (ICT) evaluation in education

60.60 Standard published

ISO/IEC JTC 1/SC 36

Information technology for learning, education and training — Learning analytics interoperability — Part 3: Guidelines for data interoperability

90.20 Standard under periodical review

ISO/IEC JTC 1/SC 36

Information technology for learning, education and training — Learning analytics interoperability — Part 4: Privacy and data protection policies

90.20 Standard under periodical review

ISO/IEC JTC 1/SC 36

Ships and marine technology — Maritime education and training — Maritime career guidance

90.92 Standard to be revised

ISO/TC 8

Polyethylene pipes and fittings for the supply of gaseous fuels or water — Training and assessment of fusion operators

90.93 Standard confirmed

ISO/TC 138/SC 4

Cosmetics — Good Manufacturing Practices — General training document

60.60 Standard published

ISO/TC 217

Intelligent transport systems — System architecture, taxonomy, terminology and data modelling — Training requirements for ITS architecture

60.60 Standard published

ISO/TC 204

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 8: Training and assessment of fusion operators

60.60 Standard published

ISO/TC 138/SC 4

Non-destructive testing — NDT training syllabuses

90.93 Standard confirmed

ISO/TC 135/SC 7

Non-destructive testing — NDT personnel training organizations

90.93 Standard confirmed

ISO/TC 135/SC 7



Leisure

Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features installed in pools for public use

60.60 Standard published

CEN/TC 136

Leisure accommodation vehicles - Terms and definitions

60.60 Standard published

CEN/TC 245

Safety for conveyor belts for winter sport or leisure use

90.92 Standard to be revised

CEN/TC 242

Leisure karts - Part 1: Safety requirements and test methods for karts

90.60 Close of review

CEN/TC 354

Leisure karts - Part 2: Safety requirements for karting facilities

90.60 Close of review

CEN/TC 354

Leisure accommodation vehicles - Caravans - Part 1: Habitation requirements relating to health and safety

60.60 Standard published

CEN/TC 245

Leisure accommodation vehicles - Motor caravans - Part 1: Habitation requirements relating to health and safety

60.60 Standard published

CEN/TC 245

Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety

60.60 Standard published

CEN/TC 245

Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans

60.60 Standard published

CEN/TC 245

Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2: Motor caravans

60.60 Standard published

CEN/TC 245

Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles

60.60 Standard published

CEN/TC 181

Leisure accommodation vehicles - Safety ventilation requirements

60.60 Standard published

CEN/TC 245

Leisure accommodation vehicles - Liquid fuel heating systems - Part 1: Caravans and caravan holiday homes

90.93 Standard confirmed

CEN/TC 245

Wearable electronic devices and technologies - Part 204-1: Electronic textile - Test method for assessing washing durability of leisurewear and sportswear e-textile systems

60.60 Standard published

CLC/SR 124

Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017)

60.60 Standard published

CEN/TC 136

Floating leisure articles for use on and in the water - Part 2: Consumer information (ISO 25649-2:2017)

60.60 Standard published

CEN/TC 136

Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2017)

60.60 Standard published

CEN/TC 136

Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2017)

60.60 Standard published

CEN/TC 136

Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2017)

60.60 Standard published

CEN/TC 136

Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2017)

60.60 Standard published

CEN/TC 136

Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25649-7:2017)

60.60 Standard published

CEN/TC 136

Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017)

60.60 Standard published

CEN/TC 136

Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods

90.92 Standard to be revised

ISO/TC 83

Floating leisure articles for use on and in the water — Part 2: Consumer information

90.92 Standard to be revised

ISO/TC 83

Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices

90.92 Standard to be revised

ISO/TC 83

Floating leisure articles for use on and in the water — Part 4: Additional specific safety requirements and test methods for Class B devices

90.92 Standard to be revised

ISO/TC 83

Floating leisure articles for use on and in the water — Part 5: Additional specific safety requirements and test methods for Class C devices

90.92 Standard to be revised

ISO/TC 83

Floating leisure articles for use on and in the water — Part 6: Additional specific safety requirements and test methods for Class D devices

90.92 Standard to be revised

ISO/TC 83

Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for Class E devices

90.92 Standard to be revised

ISO/TC 83

Awnings for leisure accommodation vehicles — Requirements and test methods

90.93 Standard confirmed

ISO/TC 83