Electromagnetic Compatibility

European standards, international standards (IEC and CISPR), EMC Harmonised standards, EMC Harmonized standards, standards providing presumption of conformity

Electromagnetic compatibility implies the ability of equipment to function satisfactorily in its electromagnetic environment without introducing intolerable electromagnetic disturbances to other equipment in that environment. It implies both emissions without introducing non-proper disturbances and immunity.

According to the EMC Directive, equipment shall be so designed and manufactured, having regard to the state of the art, ensuring that:

  • the electromagnetic disturbance generated does not exceed the level above which radio and telecommunications equipment or other equipment cannot operate as intended
  • it has a level of immunity to the electromagnetic disturbance to be expected in its intended use which allows it to operate without unacceptable degradation of its intended use
    In addition, fixed installations shall be installed applying good engineering practices and respecting the information on the intended use of its components, with a view to ensuring it complies with the requirements as set above.

Genorma.com offers a very simple way to identify and track the harmonised standards under the Directive 2014/30/EU relating to electromagnetic compatibility.

A summary of references under the Electromagnetic Compatibility Directive can also be found following the link: https://genorma.com/en/summary-of-references-of-harmonised-standards-under-the-electromagnetic-compatibility-directive-emc-as-of-2022-02-14_p10107.html


Technical committee




Electromagnetic compatibility (emc) - part 1

Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena

60.60 Standard published

TC 77

Electromagnetic compatibility (EMC) - Part 1: General - Section 1: Application and interpretation of fundamental definitions and terms

60.60 Standard published

TC 77

Electromagnetic compatibility (EMC) - Part 1-3: General - The effects of high-altitude EMP (HEMP) on civil equipment and systems

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 1-4: General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 1-5: General - High power electromagnetic (HPEM) effects on civil systems

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 1-6: General - Guide to the assessment of measurement uncertainty

60.60 Standard published

TC 77

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 1-6: General - Guide to the assessment of measurement uncertainty

60.60 Standard published

TC 77

Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single-phase systems under non-sinusoidal conditions

60.60 Standard published

TC 77/SC 77A



Electromagnetic compatibility (emc) - part 2

Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 2-11: Environment - Classification of HEMP environments

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

60.60 Standard published

TC 77/SC 77A

Amendment 1 - Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances

60.60 Standard published

TC 77/SC 77A

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance. Basic EMC publication

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 2-14: Environment - Overvoltages on public electricity distribution networks

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 3: Description of the environment - Radiated and non-network-frequency-related conducted phenomena

60.60 Standard published

TC 77

Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments

60.60 Standard published

TC 77

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 7: Low frequency magnetic fields in various environments

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results

60.60 Standard published

TC 77/SC 77A



Electromagnetic compatibility (emc) - part 3

Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase

60.60 Standard published

TC 77/SC 77A

Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase

60.60 Standard published

TC 77/SC 77A

Interpretation sheet 1 - Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)

60.60 Standard published

TC 77/SC 77A

Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)

60.60 Standard published

TC 77/SC 77A

Interpretation Sheet 1 - Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection

60.60 Standard published

TC 77/SC 77A

Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection

60.60 Standard published

TC 77/SC 77A

Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection

60.60 Standard published

TC 77/SC 77A

Corrigendum 1 - Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels

60.60 Standard published

TC 77/SC 77A

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 3-40: Testing and measurement techniques - Power quality measurement methods

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems

60.60 Standard published

TC 77/SC 77A

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 3-14: Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 3-15: Limits - Assessment of low frequency electromagnetic immunity and emission requirements for dispersed generation systems in LV network

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 3-6: Limits - Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 3-7: Limits - Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A

60.60 Standard published

TC 77/SC 77A

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A

60.60 Standard published

TC 77/SC 77A

Corridendum 2 - Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A

60.60 Standard published

TC 77/SC 77A



Electromagnetic compatibility (emc) - part 4

Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emission and immunity measurements in fully anechoic rooms (FARs)

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic Compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase

60.60 Standard published

TC 77/SC 77A

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase

60.60 Standard published

TC 77/SC 77A

Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

60.60 Standard published

TC 77/SC 77A

Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

60.60 Standard published

TC 77/SC 77A

Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity test

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test

60.60 Standard published

TC 77/SC 77A

Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test

60.60 Standard published

TC 77/SC 77A

Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications

60.60 Standard published

TC 77/SC 77A

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications

60.60 Standard published

TC 77/SC 77A

Interpretation Sheet 1 - Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

60.60 Standard published

TC 77/SC 77A

Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

60.60 Standard published

TC 77/SC 77A

Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

60.60 Standard published

TC 77/SC 77B

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emissions and immunity measurements in fully anechoic rooms (FARs)

60.60 Standard published

CISPR/CIS/A

Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

60.60 Standard published

TC 77/SC 77C

Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

60.60 Standard published

TC 77/SC 77C

Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test

60.60 Standard published

TC 77/SC 77A

Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test

60.60 Standard published

TC 77/SC 77A

Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test

60.60 Standard published

TC 77/SC 77A

Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

60.60 Standard published

TC 77/SC 77A

Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase

60.60 Standard published

TC 77/SC 77A

Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipmentwith mains current more than 16 A per phase

60.60 Standard published

TC 77/SC 77A

Corrigendum 1 - Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI immunity test methods for equipment and systems

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

60.60 Standard published

TC 77/SC 77B

Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

60.60 Standard published

TC 77/SC 77B

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

60.60 Standard published

TC 77/SC 77A

Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

60.60 Standard published

TC 77/SC 77A

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test

60.60 Standard published

TC 77/SC 77B

Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series

60.60 Standard published

TC 77

Electromagnetic compatibility (EMC) - Part 4-32: Testing and measurement techniques - High-altitude electromagnetic pulse (HEMP) simulator compendium

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 4-35: Testing and measurement techniques - HPEM simulator compendium

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 4-38: Testing and measurement techniques - Test, verification and calibration protocol for voltage fluctuation and flicker compliance test systems

60.60 Standard published

TC 77/SC 77A

Electromagnetic compatibility (EMC) - Part 4-40: Testing and measurement techniques - Digital methods for the measurement of power quantities of modulated or distorted signals

60.60 Standard published

TC 77/SC 77A



Electromagnetic compatibility (emc) - part 5

Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines - Degrees of protection by enclosures against electromagnetic disturbances (EM code)

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance. Basic EMC Publication

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines - Degrees of protection provided by enclosures against electromagnetic disturbances (EM code)

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication

60.60 Standard published

TC 77

Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling

60.60 Standard published

TC 77

Electromagnetic compatibility (EMC) - Part 5-3: Installation and mitigation guidelines - HEMP protection concepts

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 5-6: Installation and mitigation guidelines - Mitigation of external EM influences

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 5-10: Installation and mitigation guidelines - Guidance on the protection of facilities against HEMP and IEMI

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 5: Installation andmitigation guidelines - Section 4: Immunity to HEMP -Specifications for protective devices against HEMP radiateddisturbance. Basic EMC Publication

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 5-8: Installation and mitigation guidelines - HEMP protection methods for the distributed infrastructure

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 5-9: Installation and mitigation guidelines - System-level susceptibility assessments for HEMP and HPEM

60.60 Standard published

TC 77/SC 77C



Electromagnetic compatibility (emc) - part 6

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-8: Generic standards - Emission standard for professional equipment in commercial and light-industrial locations

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments

60.60 Standard published

TC 77

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments

60.60 Standard published

TC 77

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments

60.60 Standard published

CISPR/CIS/H

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

60.60 Standard published

CISPR/CIS/H

Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment

60.60 Standard published

TC 77

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment

60.60 Standard published

TC 77

Electromagnetic compatibility (EMC) - Part 6-6: Generic standards - HEMP immunity for indoor equipment

60.60 Standard published

TC 77/SC 77C

Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations

60.60 Standard published

TC 77

Electromagnetic compatibility (EMC) - Part 6-8: Generic standards - Emission standard for professional equipment in commercial and light-industrial locations

60.60 Standard published

CISPR/CIS/H



Railway applications - electromagnetic compatibility

Railway applications - Electromagnetic compatibility - Part 1: General

90.93 Standard confirmed

CLC/TC 9X

Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world

90.93 Standard confirmed

CLC/TC 9X

Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle

60.60 Standard published

CLC/TC 9X

Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle

60.60 Standard published

CLC/TC 9X

Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

60.60 Standard published

CLC/TC 9X

Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

60.60 Standard published

CLC/TC 9X

Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus

60.60 Standard published

CLC/TC 9X

Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus

60.60 Standard published

CLC/TC 9X

Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus

60.60 Standard published

CLC/TC 9X

Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus

60.60 Standard published

CLC/TC 9X

Railway applications - Electromagnetic compatibility - Part 1: General

60.60 Standard published

TC 9

Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world

60.60 Standard published

TC 9

Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle

60.60 Standard published

TC 9

Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

60.60 Standard published

TC 9

Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus

60.60 Standard published

TC 9

Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus

60.60 Standard published

TC 9



Electromagnetic compatibility - requirements for household appliances, electric tools and similar apparatus

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

60.60 Standard published

CISPR/CIS/F

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

60.60 Standard published

CISPR/CIS/F

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

60.60 Standard published

CLC/TC 210



Electromagnetic compatibility of multimedia equipment

Electromagnetic compatibility of multimedia equipment - Emission requirements

60.60 Standard published

CISPR/CIS/I

Amendment 1 - Electromagnetic compatibility of multimedia equipment - Emission requirements

60.60 Standard published

CISPR/CIS/I

Corrigendum 1 - Electromagnetic compatibility of multimedia equipment - Emission requirements

60.60 Standard published

CISPR/CIS/I

Electromagnetic compatibility of multimedia equipment - Immunity requirements

60.60 Standard published

CISPR/CIS/I

Electromagnetic compatibility of multimedia equipment - Emission Requirements

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility of multimedia equipment - Emission requirements

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility of multimedia equipment - Emission Requirements

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility of multimedia equipment - Emission Requirements

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility of multimedia equipment - Immunity requirements

60.60 Standard published

CLC/TC 210

Electromagnetic compatibility of multimedia equipment - Immunity requirements

60.60 Standard published

CLC/TC 210



Electromagnetic compatibility and radio spectrum matters (erm)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Report of the CENELEC/ETSI Joint Working Group in response to the EC letter ENTRP/F5/DP/MM/entr.f5.(2013)43164 to the ESOs

60.60 Standard published

CLC/ETSI/JWG DD

Electromagnetic compatibility and Radio spectrum Matters (ERM); Report of the CENELEC/ETSI Joint Working Group in response to the EC letter ENTRP/F5/DP/MM/entr.f5.(2013)43164 to the ESOs

60.60 Standard published

CLC/ETSI/JWG DD



Electromagnetic compatibility assessment for switchgear and controlgear

Low-voltage switchgear and controlgear - Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies

60.60 Standard published

CLC/TC 121A

Low-voltage switchgear and controlgear - Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies

60.60 Standard published

TC 121/SC 121A