Below you can find and search the list of relevant test services available in the market and offered by Accredited Laboratories in Europe. You may click on the name of the test in blue to obtain more information on the test method and the available laboratories offering that service. In addition, you may also click on the code of the corresponding European and International standards in the grey area below, to obtain the applicable standards or relevant information about them.
Electrical material, cables, conductors and electrical equipment - Cables with thermoplastic insulation of nominal voltage Uo/U up to and including 450/750 V - Testing method - EN 50395; EN 50396
Electrical material, cables, conductors and electrical equipment - Cables without cover for decorative chains - Particular requirements - HD 21.8 S2
Cellulosic electrically insulating materials - Determination of average viscometric degree of polymerization (PPS) of paper insulation
Electrical material, cables, conductors and electrical equipment - Circuit breakers for overcurrent protection for household and similar installations (lcn<12Ka) - Type Tests (except tests of electromagnetic compatibility) - EN 60898-1; EN 60898-2
Electrical material, cables, conductors and electrical equipment - Conductors of insulated cables - Electrical resistance - Dimensional limits of circular cables
Electrical material, cables, conductors and electrical equipment - Conduit systems for electrical cable management - Special tests (except tests of electromagnetic compatibility) - EN 61386-1:2008; EN 61386-21:2005; EN 61386-21/A11; EN 61386-22; EN 61386-22/A11; EN 61386-23; EN 61386-23/A11; EN 61386-24; IEC 61386-1:2008; IEC 61386-21:2002; IEC 61386-22:2002; IEC 61386-23:2002; IEC 61386-24:2004 Except section 15
Copper Tubes and copper accessories - Bend - EN ISO 8491
Copper Tubes and copper accessories - Diameter determination ( 300 mm) and thickness ( 25 mm) - Internal procedure PE-TUC 04
Copper Tubes and copper accessories - Drift-expanding at 45° - EN ISO 8493
Copper Tubes and copper accessories - Flanging - EN ISO 8494
Copper Tubes and copper accessories - Hydrostatic pressure (P ≤ 100 bar) - EN 1057
Copper Tubes and copper accessories - Marking, aspect and weight of soft welding metals verification - Internal procedure - PE-TUC 30
Electrical material, cables, conductors and electrical equipment - Electric cables - Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV - HPTR insulated single core cables and single core pre-assembled cables - Cables with polyolefine compound sheath (type 1, type 2 and type 3) - Particular requirements - Especificación UNE 0052
Ducted and non-ducted Air conditioners and Heat Pumps air/air | SASO 2663:2014 - SASO 2681; SASO 2682; ISO 5151:2010, /except section 5.2 a/to 5.5, 6.2 a/to 6.4, 7.4; ISO 5151:2017, excepto apdo./except section 5.2 a/to 5.5, 6.2 a/to 6.4, 7.4; ISO 13253:2011, excepto apdo./except section 6.2 a/to 6.4, 7.2, 7.3, 8.4; ISO 13253:2017, excepto apdo./except section 6.2 a/to 6.4, 7.2, 7.3, 8.4, 9.3.3.5; ISO 15042
Electrical material, cables, conductors and electrical equipment - Edison screw lampholders Except lampholders designed with ball screw for shade holder ring - Type tests - EN 60238
Electrical material, cables, conductors and electrical equipment - Electric cables - Measurement of smoke density of cables burning - EN 61034-1; IEC 61034-1; EN 61034-2; IEC 61034-2
Electrical material, cables, conductors and electrical equipment - Electric cables - Additional methods - HD 605; UNE 211605
Electrical material, cables, conductors and electrical equipment - Electric cables - Aluminium-clad steel wires for electrical purposes - Particular requirements - EN 61232; IEC 61232
