Test Services

Below you can find and search the list of relevant test services available in the market and offered by Accredited Laboratories in Europe. You may click on the name of the test in blue to obtain more information on the test method and the available laboratories offering that service. In addition, you may also click on the code of the corresponding European and International standards in the grey area below, to obtain the applicable standards or relevant information about them.

Search by keywords or standards reference

Inspection body - Type A - Commission Implementing Regulation (EU) No 402/2013 on the common safety method for risk evaluation and assessment amended by Commission Implementing Regulation (EU) 2015/1136

Implementing Regulation (EU) No. 402/2013, as amended by Implementing Regulation (EU) 2015/1136, Common safety method for risk assessment and evaluation (Headquarters Via Chiassatello 57, 56121 Pisa - PI) Risk Management Process Assessment Body ("AsBo"), in the following areas: 1. Structural Subsystems - Rolling Stock - Infrastructure - Control-command and signalling trackside - On-board control-command and signalling - Energy 2. Functional Subsystems and Sectors - Traffic Operation and Management - Maintenance and their safe integration into the railway system. References to standards and specifications: Decisions of the European Commission "Technical Specifications for Interoperability (TSI)" applicable to the trans-European high-speed and high-speed and conventional rail systems; Decrees and Guidelines of the Italian National Agency for Railway Safety (ANSFISA); EN 50126 (IEC 62278) - RAMS; EN 50128 (IEC 62279) - Software; EN 50129 (IEC 62425) - Safety systems. Regolamento di esecuzione (UE) n. 402/2013, modificato dal Regolamento di esecuzione (UE) 2015/1136, Metodo Comune di sicurezza per la determinazione e valutazione dei rischi (Sede di Via Chiassatello 57, 56121 Pisa - PI) Organismo di valutazione del procedimento di gestione dei rischi ("AsBo"), nei seguenti ambiti: 1. Sottosistemi strutturali - Materiale rotabile - Infrastrutture - Controllo-comando e segnalamento a terra - Controllo-comando e segnalamento a bordo - Energia 2. Sottosistemi funzionali e settori - Esercizio e gestione del traffico - Manutenzione e alla loro integrazione in sicurezza nel sistema ferroviario. Riferimenti a norme e specifiche: Decisioni della Commissione Europea "Specifiche Tecniche di Interoperabilità (STI)" applicabili al sistema ferroviario transeuropeo ad alta velocità e convenzionale; Decreti e Linee Guida dell'Agenzia Nazionale per la Sicurezza delle Ferrovie italiana (ANSFISA); EN 50126 (IEC 62278) – RAMS; EN 50128 (IEC 62279) – Software; EN 50129 (IEC 62425) – Sistemi di sicurezza.

Instrument transformers - Additional requirements for capacitor voltage transformers

Instrument transformers - Additional requirements for capacitor voltage transformers

Instrument transformers - Additional requirements for current transformers

Instrument transformers - Additional requirements for current transformers

Insulating gas - Determination of SF6 content by acoustic method

Insulating gas - Determination of SF6 content by acoustic method

Insulating liquids - Contamination by polychlorinated biphenyls (pcbs). method of determination by capillary column gas chromatography - (10 – 1000) ppm

Insulating liquids - Contamination by polychlorinated biphenyls (pcbs). method of determination by capillary column gas chromatography - (10 – 1000) ppm

Insulating liquids - Determination of 2-furfural and related compounds by HPLC. Extraction method B

Determination of 2-furfural and related compounds by HPLC. Extraction method B. 5-hydroxymethyl-2-furfural: (0,1 - 30) ppm 2-furfurialcohol: (0,1 - 30) ppm 2-furfural: (0,1 -30) ppm 2-acetylfuran: (0,1 - 30) ppm 5-methyl-2-furfural: (0,1 - 30) ppm

Insulating liquids - Determination of acid value of insulating liquids by automatic potentiometric titration

Insulating liquids - Determination of acid value of insulating liquids by automatic potentiometric titration

Insulating liquids - Determination of d.c. resistivity (ρ)+

Insulating liquids - Determination of d.c. resistivity (ρ)+

Insulating liquids - Determination of neutralization coefficient (0,005 – 2 mg) KOH/g

Determination of neutralization coefficient - (0,005 – 2 mg) KOH/g - Internal procedure PT-QUI-25 based on ASTM D664

Insulating liquids - Determination of PCB content by gas chromatography (GC/ECD - congeners 28, 52, 101, 138, 153, 180) and the sum of PCB congeners by calculation from measured values

Insulating liquids - Determination of PCB content by gas chromatography (GC/ECD - congeners 28, 52, 101, 138, 153, 180) and the sum of PCB congeners by calculation from measured values

Insulating Liquids - Determination of the breakdown voltage at power frequency (5 – 100) kV

Empirical test procedure intended to indicate the presence of contaminants such as water and solid suspended matter, and the advisability of carrying out drying and filtration treatment.

Insulating liquids - Determination of the content of dibenzyl disulfide (DBDS) by gas chromatography method

Insulating liquids - Determination of the content of dibenzyl disulfide (DBDS) by gas chromatography method

Insulating liquids - Determination of the content of free and dissolved gases from oilfilled electrical equipment by gas chromatography

Insulating liquids - Determination of the content of free and dissolved gases from oilfilled electrical equipment by gas chromatography

Insulating liquids - Determination of the content of furan derivatives by high performance liquid chromatography

Insulating liquids - Determination of the content of furan derivatives by high performance liquid chromatography




Access Genorma App Everywhere

Get fast and easy access to top European and International standards (EN, ISO, IEC) via your mobile phone, tablet or the web.