Below you can find and search the list of relevant test services available in the market and offered by Accredited Laboratories in Europe. You may click on the name of the test in blue to obtain more information on the test method and the available laboratories offering that service. In addition, you may also click on the code of the corresponding European and International standards in the grey area below, to obtain the applicable standards or relevant information about them.
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Emission
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Immunity - Product family stand
Electrical material, cables, conductors and electrical equipment - Electromagnetic remote-control switches for household fixed- electrical installations - Special tests (except tests of electromagnetic compatibility) - EN 60669-2-2; IEC 60669-2-2:2006 Except Section 26
Electronic equipment for use in power installations
Aftermarket electronic equipment in vehicles - Emission and immunity; EN 50498
Electrical material, cables, conductors and electrical equipment - Electrotechnical products - Glowing/hot-wire based test methods - Generalities - EN 60695-2-10; IEC 60695-2-10
Electrical material, cables, conductors and electrical equipment - Electrotechnical products - Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) - EN 60695-2-11 IEC 60695-2-11
Electrical material, cables, conductors and electrical equipment - Electrotechnical products - Glow-wire flammability index (GWFI) test method for materials - EN 60695-2-12; IEC 60695-2-12
Electrical material, cables, conductors and electrical equipment - Electrotechnical products - Glow-wire ignition temperature (GWIT) test method for materials - EN 60695-2-13; IEC 60695-2-13
Electrical material, cables, conductors and electrical equipment - Electrotechnical products - Needle-flame test method - EN 60695-11-5; IEC 60695-11-5
Electrical material, cables, conductors and electrical equipment - Enclosures and compartments of enclosures for the installation of Power Control Switchs - type tests (except tests for electromagnetic compatibility) - UNE 201003
Electrical material, cables, conductors and electrical equipment - Enclosures - Degrees of protection (code IK) - EN 50102; EN 62262; IEC 62262
Electrical material, cables, conductors and electrical equipment - Enclosures - Degrees of protection (code IP) - Except dust test ≥IPX7 - EN 60529; IEC 60529
Energy Star Ergonomics Safety of electrical appliances, Analogue Network Access, Acoustics, WiFi, OpenADR Active Medical Devices The testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standards or equivalent testing methods listed here with different issue dates. The testing laboratory maintains a current list of all testing methods within the flexible scope of accreditation. Department Standard / in house procedure / Version Title of standard or in house procedure (deviations / modifications of standard) Location/ reductions Energy Star ENERGY STAR Test Method for Audio/Video, ENERGY STAR Program Requirements Product Specification for Audio/Video, Rev. July2012 ENERGY STAR Program Requirements Product Specification for Audio/Video Version 3.0. Eligibility Criteria Version 3.0. (Rev. Dec-2014) A, B Energy Star ENERGY STAR Test Method, ENERGY STAR Program Requirements for Battery Charging Systems, Rev. Aug-2010 ENERGY STAR Program Requirements Product Specification for Battery Charging Systems Version 1.1. Eligibility Criteria Version 1.1. A Energy Star ENERGY STAR Test Method, ENERGY STAR Program Requirements for Telephony, Rev. Nov2013 ENERGY STAR Product Specification for Telephony, Version 3.0. Eligibility Criteria Version 3.0. Rev. Oct-2014 A, B Energy Star EPRI Generalized Internal Power Supply Efficiency Test Protocol Generalized Test Protocol for Calculating the Energy Efficiency of Internal Ac-Dc and Dc-Dc Power Supplies, Revision 6.7. A, B Energy Star IEC 62301:2011-01 Household electrical appliances – Measurement of standby power. A, B Energy Star VESA FPDM Version 2.0 Flat Panel Display Measurements Standard. Limitation. Only the measurement conditions as required in the Energy Star Program Requirements for Displays. A Energy Star IEC 62087:2011-04 EN 62087:2012-04 DIN EN 62087:2013-08 Methods of measurement for the power consumption of audio, video and related equipment. A, B Energy Star IEC 62087-1:2016-06 EN 62087-1:2016-02 DIN EN 62087-1:2016-08 Audio, video, and related equipment -Determination of power consumption -Part 1: General A, B Energy Star IEC 62087-7:2018-12 EN IEC 62087-7:2019-02 Audio, video, and related equipment -Methods of measurement for power consumption Part 7: Computer monitors A, B Energy Star IEC 62623:2012 EN 62623:2013 Desktop and notebook computers -Measurement of energy consumption A Department Standard / in house procedure / Version Title of standard or in house procedure (deviations / modifications of standard) Location/ reductions Energy Star ENERGY STAR Test Method for Computers, Rev. October-2019 ENERGY STAR Program Requirements Product Specification for Computers, Eligibility Criteria Version Rev.8.0 April-2020 A, B Energy Star ENERGY STAR Test Method for Computer Servers, Rev. Sept-2018 Standard Performance Evaluation Corporation (SPEC) Server Efficiency Rating Tool (SERT) Version 2.0.4 ENERGY STAR Program Requirements Product Specification for Computer Servers, Eligibility Criteria Version 3.0 A Energy Star ENERGY STAR Imaging Equipment Test Method, Rev. Dec-2018, ENERGY STAR Professional Imaging Equipment Test Method, Rev. Feb-2020 ENERGY STAR Program Requirements Product Specification for Imaging Equipment, Eligibility Criteria Version 3.2. A, B Energy Star ENERGY STAR Test Method for Determining Display Energy Rev. Feb2020 International Committee for Display Metrology (ICDM) Information Display Measurements Standard Version 1.03 CEA-2037-A: Determination of Television Set Power Consumption ENERGY STAR Program Requirements Product Specification for Displays -Eligibility Criteria Version 8.0 Test items: All products types and screen sizes Enhanced Performance Displays Displays Claiming Full Network Connectivity A Energy Star California Energy Commission Test Method for Calculating the Energy efficiency of Single-Voltage External Ac-Dc and Ac-Ac Power Supplies Test Method for Calculating the Energy Efficiency of Single-Voltage External Ac-Dc and Ac-Ac Power Supplies August 11, 2004. A, B Department Standard / in house procedure / Version Title of standard or in house procedure (deviations / modifications of standard) Location/ reductions Energy Star ENERGY STAR Test Method for Data Center Storage Equipment, Rev. May 2020 ENERGY STAR Program Requirements Product Specification for Data Center Storage, Eligibility Criteria Version 2.0 A Energy Star ENERGY STAR Test Method for Small Network Equipment, ENERGY STAR Program Requirements for Small network Equipment, Rev. Nov. 2013 ENERGY STAR Program Requirements Product Specification for Small network Equipment Eligibility Criteria Version 1.0. Rev. Oct-2014 A Energy Star ENERGY STAR Test Method for Small Network Equipment, ENERGY STAR Program Requirements for Small network Equipment, Rev. Nov. 2013 ENERGY STAR Program Requirements Product Specification for Small network Equipment Eligibility Criteria Version 1.0. Rev. Oct-2014 A Energy Star ENERGY STAR Test Method for Uninterruptible Power Supplies, Rev. Dec-2017 ENERGY STAR Program Requirements Product Specification for Uninterruptible Power Supplies, Eligibility Criteria Version 2.0 Limitation: Maximum electrical rated power: 50 kVA. A Energy Star EN 50563:2011-10 + A1:2013 DIN EN 50563:2014-09 VDE 0806-563:2014-09 External a.c. -d.c. and a.c. -a.c. power supplies -Determination of no-load power and average efficiency of active modes. A Energy Star EN 50564:2011-05 DIN EN 50564:2011-12 VDE 0705-2301:2011-12 Electrical and electronic household and office equipment -Measurement of low power consumption. A Energy Star CAN/CSA-C381.1-17 Energy performance of external ac-dc and ac-ac power supplies A Energy Star CAN/CSA-C381.2-17 Energy performance of battery-charging systems and uninterruptible power supplies A Energy Star CAN/CSA-C62301:11 Household electrical appliances -Measurement of standby power A Department Standard / in house procedure / Version Title of standard or in house procedure (deviations / modifications of standard) Location/ reductions Energy Star Commission Regulation (EU) 2019/2021 of 1 October 2019, Corrigendum to Commission Regulation (EU) 2019/2021 of 1 October 2019, OJ L 50, 24.2.2020, p. 23 and Commission Regulation (EU) 2021/341 of 23 February 2021 amending Regulations (EU) 2019/2021 Laying down ecodesign requirements for electronic displays pursuant to Direc ve 2009/125/EC of the European Parliament and of the Council, amending Commission Regula on (EC) No 1275/2008 and repealing Commission Regula on (EC) No 642/2009 -Annex II Ecodesign requirements -A: ENERGY EFFICIENCY REQUIREMENTS -B: ALLOWANCES AND ADJUSTMENTS FOR THE PURPOSE OF THE EEI CALCULATION AND FUNCTIONAL REQUIREMENTS -C: OFF MODE, STANDBY AND NETWORKED STANDBY MODE REQUIREMENTS -Annex III Measurement methods and calculations -Annex III(a) Transitional methods A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 61180: 2016 EN 61180: 2017 High-voltage test techniques for lowvoltage equipment -De.ni ons, test and procedure requirements, test equipment A, B Product Safety IEC 60112: 2020 EN 60112: 2020 Method for the determina on of the proof and the compara ve tracking indices of solid insula ng materials A, B Product Safety IEC 60695-11-5: 2016 EN 60695-11-5: 2017 Fire hazard tes ng – Part 11-5: Test .ames – Needle-.ame test method – Apparatus, con.rmatory test arrangement and guidance A, B Product Safety IEC 60695-11-10: 2013 EN 60695-11-10: 2013 + A1:2014 Fire hazard tes ng – Part 11-10: Test .ames – 50 W horizontal and ver cal .ame test methods A, B Product Safety IEC 60695-11-20: 2015 EN 60695-11-20: 2015 + A1:2016 Fire hazard tes ng -Part 11-20: Test .ames -500 W .ame test methods A, B Product Safety IEC 60695-10-2: 2014 EN 60695-10-2: 2014 Fire hazard tes ng Part 10-2: Abnormal heat Ball pressure test method A, B Product Safety IEC 60695-2-10: 2021 EN 60695-2-10: 2021 Fire hazard tes ng -Part 2-10: Glowing/hot-wire based test methods -Glow-wire apparatus and common test procedure A, B Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Product IEC 60695-2-12: 2021 Fire hazard tes ng -Part 2-12: A, B Safety EN 60695-2-12: 2021 Glowing/hot-wire based test methods -Glow-wire .ammability index (GWFI) test method for materials Product IEC 60695-2-13: 2021 Fire hazard tes ng -Part 2-13: A, B Safety EN 60695-2-13: 2021 Glowing/hot-wire based test methods -Glow-wire igni on temperature (GWIT) test method for materials Product UL 746C: 2018 Standard for Polymeric Materials – Use A, B Safety in Electrical Equipment Evalua ons: – Clause 9: Compara ve Tracking Index (CTI). Determined by the method described in ASTM D 3638 (This test method is technically equivalent to IEC 60112). -Clause 12 Hot-Wire Igni on (HWI) – Abnormal Overload Test or Glow-Wire End-Product Test (GWEPT) equivalent to IEC 60695-2-11. -Clause 29 Mold Stress-Relief Distor on -Clause 62 Ball Pressure Test on End-Product (equivalent to IEC 60695-10-2) - Product UL 94:2023 Standard for Polymeric Materials – Use A, B Safety in Electrical Equipment Evalua ons. Clause 7: Horizontal Burning Test; HB . Clause 8: 50W (20 mm) Ver cal Burning Test. Clause 9: 500 W (125 mm) Ver cal Burning Test Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Product Safety ISO 9772:2020 Cellular plas cs -Determina on of horizontal burning characteris cs of small specimens subjected to a small .ame. A, B Product Safety ISO 9773:1998 + A1:2003 Plas cs -Determina on of burning behavior of thin .exible ver cal specimens in contact with a small.ame igni on source. A, B Product Safety ISO 23125:2015 EN ISO 23125:2015 Machine tools -Safety -Turning machines Annex A: Impact test method for guards on turning machines A Product Safety ISO 306:2022 Plas cs — Thermoplas c materials — Determina on of Vicat so ening temperature (VST) A Product Safety ISO 180:2023 JIS K 7110:1999 Plas cs — Determina on of Izod impact strength A Product Safety ISO 8256:2004 JIS K 7160:1996 Plas cs --Determina on of tensileimpact strength A Product Safety ISO 179-1:2023 JIS K 7111-1:2012 Plas cs — Determina on of Charpy impact proper es — Part 1: Non-instrumented impact test A Product Safety ISO 179-2:2020 JIS K 7111-2:2006 Plas cs — Determina on of Charpy impact proper es — Part 2: Instrumented impact test A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Product Safety EN 1022:2023 Furniture -Sea ng -Determina on of stability A Product Safety EN 1728:2012+A1:2013 Furniture -Sea ng -Test methods for the determina on of strength and durability A Product Safety EN 1335-1:2020 + A1:2022 O.ce furniture -O.ce work chair -Part 1: Dimensions -Determina on of dimensions A Product Safety EN 1335-2:2018 O.ce furniture -O.ce work chair -Part 2: Safety requirements A Product Safety ISO 24496:2021 O.ce furniture — O.ce chairs — Methods for the determina on of dimensions (CMD) A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 60825-2:2021 + Cor1:2021 Safety of laser products – Part 2: Safety of op cal .bre communica on systems (OFCS) A Product Safety IEC 60068-2-75:2014 EN 60068-2-75:2014 Tests -Test Eh: Hammer tests A Product Safety JIS C0920:2003 Degree of protec on provided by the enclosure of electrical equipment (IP code) A, B Product Safety ISO 20653:2023 JIS D 5020:2016 Road vehicles — Degrees of protec on (IP code) — Protec on of electrical equipment against foreign objects, water and access (Excep ons: First Characteris c: 5K and 6K; Second Characteris c: 4K and 6K.) A Environmental Tes ng ISO 22479:2019 Corrosion of metals and alloys — Sulfur dioxide test in a humid atmosphere (.xed gas method) A Environmental Tes ng JIS C 60068-2-11:2023 Environmental test methods -Electricity and electronics -Part 2-11: Salt spray test method (test symbol: Ka) A Environmental Tes ng JIS C 60068-2-52:2020 Environmental test methods -Electricity and electronics -Part 2-11: Salt spray test method (test symbol: Ka) A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Environmental Tes ng ISO 9227:2022 JIS Z2371: 2015 Corrosion tests in ar .cial atmospheres -Salt spray tests A Product Safety EN 41003:2008-11 Par cular safety requirements for A DIN EN 41003: 2009 equipment to be connected to VDE 0804-100:2009 telecommunica on networks and/or a cable distribu on system. Product Safety EN 50332-1:2013 DIN EN 50332-1:2014-08 Sound system equipment: Headphones and earphones associated with portable audio equipment -Maximum sound pressure level measurement methodology and limit considera ons -Part 1: General method for "one package equipment". A Product Safety EN 50332-2:2013 DIN EN 50332-2:2014-03 Sound system equipment: Headphones and earphones associated with portable audio equipment -Maximum sound pressure level measurement methodology and limit considera ons -Part 2: Matching of sets with headphones if either or both are o.ered separately. A Product Safety IEC 62852:2014+A1:2020 Connectors for photovoltaic systems A EN 62852:2015 + AC:2019 Safety requirements and tests. +A1:2020 DIN EN 62852 (VDE 0126 300):2015 + A1:2019 Product Safety EN IEC 62790:2020 Junc on boxes for photovoltaic A IEC 62790:2020 modules. EN 62790:2015 DIN EN 62790:2016 DIN EN IEC 62790:2021 Product Safety IEC 60034-1: 2022 Rota ng electrical machines -Part 1: A IEC 60034-1:2017-05 Ra ng and performance. EN 60034-1:2010 + AC:2010 DIN EN 60034-1:2015-02 VDE 0530-1:2015-02 Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety EN IEC 60034-5:2020 DIN EN IEC 60034-5:2020 Rota ng electrical machines -Part 5: Degrees of protec on provided by the integral design of rota ng electrical machines (IP code) -Classi.ca on A Product Safety IEC 60034-11:2020 Rota ng electrical machines -Part 11: A IEC 60034-11:2004 Thermal protec on EN 60034-11:2004 DIN EN 60034-11:2005 Product Safety IEC 60065:2014 Audio, video and similar electronic A,B EN60065:2014 apparatus -Safety requirements. DIN EN 60065:2016-05 VDE 0860:2016-05 AS/NZS 60065 Product Safety IEC 60204-1:2016+A1 EN 60204-1:2018 Safety of machinery -electrical equipment of machines -Part 1: General requirements. A Product Safety IEC 60335-1:2020-09 Household and similar electrical A,B EN 60335-1:2020 appliances -Safety -Part 1: General DIN EN 60335-1:2020-08 requirements. VDE 0700-1:2020-08 Product Safety IEC 60335-2-2:2019 Household and similar electrical A EN 60335-2-2:2010 + appliances -Safety -Part 2-2: Par cular A1:2013 requirements for vacuum cleaners and DIN EN 60335-2-2 water-suc on cleaning appliances. VDE 0700-2 Product Safety IEC 60335-2-8:2022 Household and similar electrical A EN 60335-2-8:2015 A1:2016 appliances -Safety -Part 2-8: Par cular DIN EN 60335-2-8:2016-08 requirements for shavers, hair clippers and similar appliances. Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 60335-2-9:2019 Household and similar electrical A EN 60335-2-9:2003 + appliances -Safety -Part 2-9: Par cular A1:2004 + A2:2006 + requirements for grills, toasters and A12:2007 + A13:2010 similar portable cooking appliances. DIN EN 60335-2-9 VDE 0700-9 Product Safety IEC 60335-2-13:2021 Household and similar electrical A EN 60335-2-13:2010 + appliances -Safety -Part 2-13: A11:2012 +A1:2019 Par cular requirements for deep fat DIN EN 60335-2-13 fryers, frying pans and similar VDE 0700-13 appliances. Product Safety IEC 60335-2-14:2016 + Household and similar electrical A A1:2019 appliances -Safety -Part 2-14: EN 60335-2-14:2006 + Par cular requirements for kitchen A1:2008 + A11:2012 machines. DIN EN 60335-2-14 VDE 0700-14 Product Safety IEC 60335-2-15:2012 + Household and similar electrical A A2:2018 appliances -Safety -Part 2-15: EN 60335-2-15: Par cular requirements for appliances 2016+A11:2018 for hea ng liquids. DIN EN 60335-2-15 VDE 0700-15 Product Safety IEC 60335-223:2016/AMD1:2019 EN 60335-2-23:2003 + A1:2008 + A11:2010 +A2:2015 DIN EN 60335-2-23 VDE 0700-23 Household and similar electrical appliances -Safety -Part 2-23: Par cular requirements for appliances for skin or hair care. A Product Safety IEC 60335-2-24:2020 Household and similar electrical A EN 60335-2-24:2010/ appliances -Safety Part 2-24: Par cular +A1:2019+ requirements for refrigera ng A2:2019+A11:2020 appliances, ice-cream appliances and DIN EN 60335-2-24 ice makers. VDE 0700-24 Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 60335-2-28:2021 Household and similar electrical A, EN 60335-2-28:2003 + appliances -Safety -Part 2-28: B A1:2008+ A11:2018 Par cular requirements for sewing DIN EN 60335-2-28 machines. VDE 0700-28 Product Safety IEC 60335-2-29:2016 + Household and similar electrical A A1:2019 appliances -Safety -Part 2-29: EN 60335-2 Par cular requirements for ba ery 29:2021+A1:2021 chargers. DIN EN 60335-2-29 VDE 0700-29 Product Safety IEC 60335-2 Household and similar electrical A 30:2009/AMD2:2021 appliances -Safety -Part 2-30: EN 60335-2 Par cular requirements for room 30:2009/A1:2020 A2:2022 heaters. DIN EN 60335-2-30 VDE 0700-30 Product Safety IEC 60335-2-32:2019 Household and similar electrical A,B EN IEC 60335-2-32•.2021 appliances -Safety -Part 2-32: DIN EN 60335-2-32:2022 Par cular requirements for massage VDE 0700-32:2022 appliances. Product Safety IEC 60335-2-40:2022 Household and similar electrical A EN 60335-2-40:2003 + appliances -Safety -Part 2-40: A11:2004 + A12:2005 + Par cular requirements for electrical A1:2006 + A2:2009 + heat pumps, air condi oners and A13:2012 dehumidi.ers. DIN EN 60335-2-40 VDE 0700-40 Product Safety IEC 60335-2-44:2021 Household and similar electrical A EN 60335-2-44:2002 + appliances -Safety -Part 2-44: A1:2008 + A2:2012 Par cular requirements for ironers. DIN EN 60335-2-44 VDE 0700-44 Product Safety IEC 60335-2-45:2002 + Household and similar electrical A,B A1:2008 + A2:2011 appliances -Safety -Part 2-45: EN 60335-2-45:2002 + Par cular requirements for portable A1:2008 + A2:2012 hea ng tools and similar appliances. DIN EN 60335-2-45 VDE 0700-45 Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 60335-2-55:2021 Household and similar electrical A EN 60335-2 appliances -Safety -Part 2-55: 55:2003/A11:2018 Par cular requirements for electric DIN EN 60335-2-55 appliances for use with aquariums and VDE 0700-55 garden ponds. Product Safety IEC 60335-2-56:2002 + Household and similar electrical A A1:2008 + A2:2014 appliances -Safety -Part 2-56: EN 60335-2-56:2003 + Par cular requirements for projectors A1:2008 + A2:2014 and similar appliances. DIN EN 60335-2-56 VDE 0700-56 Product Safety IEC 60335-2-75:2012 + Household and similar electrical A A2:2018 appliances -Safety -Part 2-75: EN 60335-2-75:2004 + Par cular requirements for commercial A1:2005 + A11:2006 + dispensing appliances and vending A2:2008 + A12:2010 machines. DIN EN 60335-2-75 VDE 0700-75 Product Safety IEC 60335-2-80:2015 Household and similar electrical A EN 60335-2-80:2003 + appliances -Safety -Part 2-80: A1:2004 + A2:2009 Par cular requirements for fans. DIN EN 60335-2-80 VDE 0700-80 Product Safety IEC 60335-2-82:2017/ Household and similar electrical A AMD1:2020 appliances -Safety -Part 2-82: EN 60335-2-82:2003 + Par cular requirements for amusement A2:2020 machines and personal service DIN EN 60335-2-82 machines. VDE 0700-82 Product Safety IEC 60335-2-84:2019 Household and similar electrical A EN 60335-2-84:2003 + appliances -Safety -Part 2-84: A2:2019 Par cular requirements for toilets. DIN EN 60335-2-84 VDE 0700-84 Product Safety IEC 60335-2-85:2002 + Household and similar electrical A A1:2008 + A2:2017 appliances -Safety -Part 2-85: EN 60335-2-85:2003 + Par cular requirements for fabric A2:2020 steamers. DIN EN 60335-2-85 VDE 0700-85 Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 60335-2-89:2019 Household and similar electrical A EN 60335-2-89:2010 + appliances -Safety -Part 2-89: A2:2017 Par cular requirements for commercial DIN EN 60335-2-89 refrigera ng appliances with an VDE 0700-89 incorporated or remote refrigerant condensing unit or compressor. Product Safety IEC 60335-2-102:2017 Household and similar electrical A EN 60335-2-102:2016 appliances -Safety -Part 2-102: DIN EN 60335-2-102 Par cular requirements for gas, oil and VDE 0700-102 solid-fuel burning appliances having electrical connec ons. Product Safety IEC 60335-2-106:2021 Household and similar electrical A EN 60335-2-106:2008 appliances -Safety -Part 2-106: DIN EN 60335-2-106 Par cular requirements for heated VDE 0700-106 carpets and for hea ng units for room hea ng installed under removable .oor coverings. Product Safety IEC 60529:2013-08 Degrees of protec on provided by A,B EN 60529:1991-10 + A1: enclosures (IP Code). 2000-02 DIN EN 60529:2000-09 + A1:2010-04 VDE 0470-1:2000-09 + A1:2010-04 Product Safety IEC 60598-1:2020-08 EN 60598-1:2021-03 Historical DIN EN 60598-1:2020-08 Historical VDE 0711-1:2015 + A1:2016 Historical Luminaires -Part 1: General requirements and tests. A Product Safety IEC 60598-2-1:2021 Luminaires -Part 2: Par cular A EN IEC 60598-2-1:2021 requirements; Sec on One: Fixed DIN EN 60598-2-1:2021 general purpose luminaires. VDE 0711-201:2021 Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 60598-2-2:2023 Luminaires -Part 2: Par cular A EN 60598-2-2:2012 requirements; Sec on 2: Recessed DIN EN 60598-2-2:2012 luminaires. VDE 0711-202:2012 Product Safety IEC 60598-2-4:2017 Luminaires -Part 2: Par cular A EN 60598-2-4:2018 requirements; Sec on 4: Portable DIN EN 60598-2-4:2018 general purpose luminaires. VDE 0711-2-4:2018 Product Safety IEC 60598-2-6:1994 + Luminaires -Part 2: Par cular A A1:1996 requirements; Sec on 6: Luminaires EN 60598-2-6:1994 + with built-in transformers for .lament A1:1997 lamps. DIN EN 60598-2-6 VDE 0711-206 Product Safety IEC 60598-2-8:2013-04 Luminaires -Part 2-8: Par cular A EN 60598-2-8:2013-06 requirements -Handlamps. DIN EN 60598-2-8:2014-03 VDE 0711-2-8 Product Safety IEC 60598-2-10:2003 Luminaires -Part 2-10: Par cular A EN 60598-2-10:2003 requirements -Portable luminaires for DIN VDE 711-2-10 children. VDE 0711-2-10 Product Safety IEC 60598-2-20:2014 Luminaires -Part 2-20: Par cular A EN 60598-2-20:2015 requirements -Ligh ng chains. DIN EN 60598-2-20 VDE 0711-2-20 Product Safety IEC 60601-1:2005/AMD2 Medical electrical equipment -Part 1: A,B EN 60601-1:2006 + A1:2013 General requirements for basic safety + A 12 :2014+A2 :2021 and essen al performance. DIN EN 60601-1:2022 VDE 0750-1:2022 Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 60601-1-1:2000 Medical electrical equipment -Part 1-1: A EN 60601-1-1:2001 General requirements for safety DIN EN 60601-1-1:2002-08 Collateral standard: Safety VDE 0750-1-1:2002-08 requirements for medical electrical systems. Product Safety IEC 60601-1-3:2008 + Medical electrical equipment -Part 1-3: A A1:2013 General requirements for basic safety IEC 60601-1-3:2008/ A2:2021 and essen al performance -Collateral EN 60601-1-3:2008 + Standard: Radia on protec on in A1:2013 diagnos c X-ray equipment. EN 60601-1-3:2008/A2:2021 DIN EN 60601-1-3:2014-06 VDE 0750-1-3:2014-6 Product Safety IEC 60601-1-4:1996 + Medical electrical equipment -Part 1-4: A A1:1999 General requirements for safety EN 60601-1-4:1996+A1:1999 Collateral Standard: Programmable DIN EN 60601-1-4:2001-04 electrical medical systems. VDE 0750-1-4:2001-04 Product Safety IEC 60601-1-6:2010 + Medical electrical equipment -Part 1-6: A A1:2013 General requirements for basic safety IEC 60601-1-6:2010/A2:2020 and essen al performance -Collateral EN 60601-1-6:2010 standard: Usability. EN 60601-1-6:2010/A1:2015 EN 60601-1-6:2010/A2:2021 DIN EN 60601-1-6:2010-10 + A1:201207 DIN EN 60601-16:2016-02 VDE 0750-1-6:2010-10 + A1:2012-07 VDE 0750-1-6:2016-02 Product Safety IEC 60601-1-8:2006 + Medical electrical equipment -Part 1-8: A A1:2012 General requirements for basic safety IEC 60601-1-8:2006/A2:2020 and essen al performance -Collateral EN 60601-1-8:2007 + Standard: General requirements, tests A1:2013 and guidance for alarm systems in EN 60601-1-8:2007/A2:2021 medical electrical equipment and DIN EN 60601-1-8:2008-02 + medical electrical systems. A1:2011-01 VDE 0750-1-8:2008-02 + A1:2011-01 Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons DIN EN 60601-1-8:2021-12 VDE 0750-1-8:2021-12 Product Safety IEC 60601-1-9:2007 Medical electrical equipment -Part 1-9: A IEC 60601-1-9:2007/A1:2013 General requirements for basic safety IEC 60601-1-9:2007/A2:2020 and essen al performance -Collateral EN 60601-1-9:2008 Standard: Requirements for EN 60601-1-9:2008/A1:2013 environmentally conscious design EN 60601-1-9:2008/A2:2020 DIN EN 60601-1-9:2021-05 VDE 0750-1-9:2021-05 Product Safety IEC 60601-1-11:2015 Medical electrical equipment -Part 1 A IEC 60601-1 11: General requirements for basic 11:2015/A1:2020 safety and essen al performance EN 60601-1-11:2015 Collateral Standard: Requirements for EN 60601-1 medical electrical equipment and 11:2015/A1:2021 medical electrical systems used in the DIN EN 60601-1-11:2021-12 home healthcare environment VDE 0750-1-11:2021-12 Product Safety IEC 60601-2-2:2017 Medical electrical equipment -Part 2-2: A IEC 60601-2-2:2017/A1:2023 Par cular requirements for the basic EN 60601-2-2:2018 safety and essen al performance of DIN EN 60601-2-2:2010-01 high frequency surgical equipment and VDE 0750-2-2:2010-01 high frequency surgical accessories. DIN EN IEC 60601-2-2:2018 12 VDE 0750-2-2:2018-12 Product Safety IEC 60601-2-4:2010 + Medical electrical equipment -Part 2-4: A A1:2018 Par cular requirements for basic safety EN 60601-2-4:2011 and essen al performance of cardiac EN 60601-2-4:2011/A1:2019 de.brillators. DIN EN 60601-2-4:2012-05 VDE 0750-2-4:2012-05 DIN EN 60601-2-4:2021-09 VDE 0750-2-4:2021-09 Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 60601-2-5:2009 Medical electrical equipment -Part 2-5: A EN 60601-2-5:2015 Par cular requirements for basic safety DIN IEC 60601-2-5:2015 and essen al performance of ultrasonic VDE 0750-2-5: 2016-08 physiotherapy equipment. Product Safety IEC 60601-2-7:1998 Medical electrical equipment -Part 2-7: A EN 60601-2-7:1998 Par cular requirements for the safety of DIN EN 60601-2-7:2000-03 high-voltage generators of diagnos c X VDE 0750-2-7: 2000-03 ray generators. Product Safety IEC 60601-2-10:2012 + Medical electrical equipment -Part 2 A A1:2016 10: Par cular requirements for the IEC 60601-2 basic safety and essen al performance 10:2012/A2:2023 of nerve and muscle s mulators. EN 60601-2-10:2015 EN 60601-2 10:2015/A1:2016 DIN EN 60601-2-10 VDE 0750-2-10:2017-09 Product Safety ISO 60601-2-12:2020 Medical electrical equipment -Part 2 A EN 60601-2-12:2006 12: Par cular requirements for basic DIN EN ISO 80601-2-12:2012 safety and essen al performance of 02 cri cal care ven lators VDE 0750-2-12:2012-02 DIN EN ISO 80601-2-12 VDE 0750-2-12:2020-07 Product Safety IEC 60601-2-16:2018 Medical electrical equipment -Part 2 A EN 60601-2-16:2015 16: Par cular requirements for basic DIN EN 60601-2-16:2016-02 safety and essen al performance of VDE 0750-2-16:2016-02 haemodialysis, haemodia.ltra on and DIN EN IEC 60601-2-16 VDE haemo.ltra on equipment. 0750-2-16:2020-05 Product Safety IEC 60601-2-18:2009 Medical electrical equipment -Part 2 A,B EN 60601-2-18:2015 18: Par cular requirements for the DIN EN 60601-2-18:2016 basic safety and essen al performance VDE 0750-2-18:2016-10 of endoscopic equipment. Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 60601-2-22:2019 Medical electrical equipment -Part 2 A EN 60601-2-22:2020 22: Par cular requirements for basic DIN EN 60601-2-22:2022 safety and essen al performance of VDE 0750-2-22:2022 surgical, cosme c, therapeu c and diagnos c laser equipment. Product Safety IEC 60601-2-24:2012 Medical electrical equipment -Part 2 A EN 60601-2-24:2015 24: Par cular requirements for basic DIN EN 60601-2-24:2016-04 safety and essen al performance of VDE 0750-2-24:2016-04 infusion pumps and controllers. Product Safety IEC 60601-2-25:2011 Medical electrical equipment -Part 2 A EN 60601-2-25:2015 25: Par cular requirements for basic DIN IEC 60601-2-25:2016-08 safety and essen al performance of VDE 0750-2-25:2016-08 electrocardiographs. Product Safety IEC 60601-2-27:2011 Medical electrical equipment -Part 2 A EN 60601-2-27:2014 27: Par cular requirements for the DIN IEC 60601-2-27 basic safety and essen al performance VDE 0750-2-27:2015-04 of electrocardiographic monitoring equipment. Product Safety IEC 60601-2-28:2017 Medical electrical equipment -Part 2 A EN 60601-2-28:2010 28: Par cular requirements for basic DIN EN 60601-2-28:2010-11 safety and essen al performance of X VDE 0750-2-28:2010-11 ray tube assemblies for medical DIN EN IEC 60601-2-28 VDE diagnosis. 0750-2-28:2020-08 Product Safety IEC 80601-2-30:2018 Medical electrical equipment -Part 2 A EN 80601-2-30:2019 30: Par cular requirements for the EN 80601-2 basic safety and essen al performance 30:2010/A1:2015 of automated non-invasive DIN EN 80601-2-30: 2011-05 sphygmomanometers. VDE 0750-2-30:2011-05 DIN EN IEC 80601-2-30 VDE 0750-2-30:2020-03 Product Safety IEC 60601-2-33:2022 Medical electrical equipment -Part 2 A EN 60601-2-33/A12: 2016 33: Par cular requirements for the DIN EN 60601-2-33:2017 basic safety and essen al performance VDE 0750-2-33:2017 of magne c resonance equipment for medical diagnosis. Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 60601-2-34:2011 Medical electrical equipment -Part 2 A EN 60601-2-34:2014 34: Par cular requirements for the DIN IEC 60601-2-34:2008 basic safety and essen al performance DIN EN 60601-2-34 :2015 of invasive blood pressure monitoring VDE 0750-2-34:2015 equipment. Product Safety IEC 60601-2-37:2007 + Medical electrical equipment -Part 2 A A1:2015 37: Par cular requirements for the EN 60601-2-37/A1:2015 basic safety and essen al performance DIN EN 60601-2-37:2016 of ultrasonic medical diagnos c and VDE 0750-2-37:2016 monitoring equipment. Product Safety IEC 60601-2-41:2021 EN 60601-2-41:2021 Medical electrical equipment -Part 241: Par cular requirements for the basic safety and essen al performance of surgical luminaires and luminaires for diagnosis. A Product Safety IEC 60601-2-43:2022 Medical electrical equipment -Part 2 A EN 60601-2-43:2023 43: Par cular requirements for basic DIN EN IEC 60601-2-43:2024 safety and essen al performance of X VDE 0750-2-43:2024 ray equipment for interven onal procedures. Product Safety IEC 60601-2-44: 2016 Medical electrical equipment -Part 2 A EN 60601-2-44:2009 + + 44: Par cular requirements for the A2:2016 basic safety and essen al performance DIN EN 60601-2-44:2017 of X-ray equipment for computed VDE 0750-2-44:2017 tomography. Product Safety IEC 60601-2 Medical electrical equipment -Part 2 A 45:2011/A2:2022 45: Par cular requirements for the EN 60601-2-45:2011 + basic safety and essen al performance A1:2015 of mammographic X-ray equipment and DIN EN 60601-2-45:2017 mammographic stereotac c devices. VDE 0750-2-45:2017 Product Safety IEC 80601-2-49:2018 Historical EN 60601-2-49 :2019 Historical DIN EN IEC 80601-2-49 Historical VDE 0750-2-49:2020-10 Historical Medical electrical equipment -Part 249: Par cular requirements for the basic safety and essen al performance of mul func on pa ent monitors. A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 60601-2-50:2020 + Medical electrical equipment -Part 2 A A1:2023 50: Par cular requirements for the EN IEC 60601-2-50/A1:2023 basic safety and essen al performance DIN EN 60601-2-50:2022 of infant phototherapy equipment. VDE 0750-2-50: 2022 Product Safety IEC 60601-2-52:2009 + Medical electrical equipment -Part 2 A A1:2015 52: Par cular requirements for the EN 60601-2-52:2010 + basic safety and essen al performance A1:2015 of medical beds DIN EN 60601-2-52:2016 VDE 0750-2-52:2016 Product Safety IEC 60601-2-54:2022 Medical electrical equipment -Part 2 A EN 60601-2-52/A2:2019 54: Par cular requirements for the DIN EN 60601-2-54:2022 basic safety and essen al performance VDE 0750-2-54:2022 of X-ray equipment for radiography and radioscopy. Product Safety IEC 60601-2-63:2021 Medical electrical equipment -Part 2 A EN 60601-2 63: Par cular requirements for the 63:2015/A2:2021 basic safety and essen al performance DIN EN 60601-2-63:2022 of dental extra-oral X-ray equipment. VDE 0750-2-63:2022 Product Safety IEC 60601-2-65:2021 Medical electrical equipment -Part 2 A EN 60601-2 65: Par cular requirements for the 65:2013/A2:2021 basic safety and essen al performance DIN EN 60601-2-65:2022 of dental intra-oral X-ray equipment. VDE 0750-2-65:2022 Product Safety IEC 80601-2-60:2019 Medical electrical equipment -Part 2 A EN IEC 80601-2-60:2020 60: Par cular requirements for the DIN EN IEC 80601-2-60:2021 basic safety and essen al performance VDE 0750-2-60:2021 of dental equipment Product Safety ISO 7494-1:2018 EN ISO 7494-1:2018 DIN EN ISO 7494-1:2018 Den stry -Sta onary dental units and dental pa ent chairs -Part 1: General requirements A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety ISO 14457:2017 EN ISO 14457:2017 DIN EN ISO 14457:2018 Density-Handpieces and motors A Product Safety IEC 60704-1:2021 Household and similar electrical A EN 60704-1:2021 appliances -Test code for the DIN EN IEC 60704-1:2023 determina on of airborne acous cal VDE 0705-704-1:2023 noise -Part 1: General requirements Product Safety IEC 60747-5-1:2002 Discrete semiconductor devices and A EN 60747-5-1:2001 + integrated circuits -Part 5-1: A1:2002 + A2:2002 Optoelectronic devices -General. DIN EN 60747-5-1:2003-01 VDE 0884-1:2003-01 Product Safety IEC 60747-5-3:2009 Discrete semiconductor devices and A EN 60747-5-3:2001 + integrated circuits -Part 5-3: A1:2002 Optoelectronic devices -Measuring DIN EN 60747-5-3:2003 methods. VDE 0884-3:2003 Product Safety IEC 60747-5-5:2020 Discrete semiconductor devices and A EN IEC 60747-5-5:2020 integrated circuits -Part 5-5: DIN EN 60747-5-5:2021 Optoelectronic devices -Essen al VDE 0884-5:2021 ra ngs and characteris cs. Product Safety IEC 60825-1:2014 Safety of laser products -Part 1: A,B EN 60825-1:2014 /A11:2021 Equipment classi.ca on and DIN EN 60825-1:2022 requirements. VDE 0837-1:2022 Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 60838-1:2023 Miscellaneous lampholders -Part 1: A EN 60838-1:2017/A11:2021 General requirements and tests. DIN EN 60838-1 :2022 VDE 0616-5:2022 Product Safety IEC 60838-2-2:2012 Miscellaneous lampholders -Part 2-2: A EN 60838-2-2/A1:2012 Par cular requirements -Connectors DIN EN 60838-2-2:2012 for LED-modules. VDE 0616-6:2012 Product Safety IEC 60939-2:2023 Sec onal speci.ca on -Passive .lter A EN 60939-2/A1:2023 units for which safety tests are DIN EN 60939-2:2006 appropriate -Test methods and general VDE 0565-3-1:2006 requirements. Product Safety IEC 60939-3:2024 DIN EN 60939-3:2016 Passive .lter units for electromagne c interference suppression -Part 3: Passive .lter units for which safety tests are appropriate A Product Safety IEC 60950-1:2005 + A1:2009 Informa on technology equipment A,B + A2:2013 Safety -Part 1: General requirements. EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 DIN EN 60950-1 :2007 VDE 0805-1 :2007 Product Safety IEC 60950-22:2016 Informa on technology equipment A EN 60950-22:2006 Safety -Part 22: Equipment installed DIN EN 60950-22 outdoors. VDE 0805-22 Product Safety IEC 60999-1:1999 Connec ng devices -Electrical copper A EN 60999-1:2000 conductors -Safety requirements for DIN EN 60999-1:2000 screw-type and screwless-type clamping VDE 0609-1:2000-12:2000 units -Part 1: General requirements and par cular requirements for clamping Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons 2units for conductors from 0,2 mmup to 35 mm2 (included). Product Safety IEC 61010-1:2010 + A1:2016 Safety requirements for electrical A,B EN 61010 equipment for measurement, control 1:2010/A1:2019/AC:2019 and laboratory use -Part 1: General DIN EN 61010-1:2020 requirements. VDE 0411-1:2020 Product Safety IEC 61010-2-020:2016 Safety requirements for electrical A DIN EN 61010-2-020:2017 VDE 0411-2-020:2017 equipment for measurement, control, and laboratory use -Part 2-020: Par cular requirements for laboratory centrifuges. Product Safety IEC 61010-031:2022 EN IEC 61010-031:2023 EN 61010-31:2015 + A1:2021 + A11:2021 DIN EN 61010-031:2016-07 Historical VDE 0411-031:2016-07 Safety requirements for electrical equipment for measurement, control and laboratory use -Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test. A,B Product Safety IEC 61010-2-032:2023 Safety requirements for electrical A,B DIN EN 61010-2-032:2023 equipment for measurement, control VDE 0411-2-032:2023 and laboratory use -Part 2-032: EN 61010-2-032:2021 Par cular requirements for hand-held + A11:2021 and hand manipulated current sensors for electrical test and measurement. Product Safety IEC 61010-2-010:2019 Safety requirements for electrical B EN 61010-2-010:2020 equipment for measurement, control DIN EN 61010-2-010:2022 and laboratory use -Part 2-010: VDE 0411-2-010:2022 Par cular requirements for laboratory equipment for the hea ng of materials. Product Safety IEC 61010-2-040:2020 Safety requirements for electrical B EN 61010-2-040:2021 equipment for measurement, control DIN EN 61010-2-040:2023 and laboratory use -Part 2-040: VDE 0411-2-040:2023 Par cular requirements for sterilizers and washer-disinfectors used to treat medical materials. Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 61010-2-081:2019 Safety requirements for electrical A,B EN IEC 61010-2-81:2020 equipment for measurement, control DIN EN 61010-2-081:2022 and laboratory use -Part 2-081: VDE 0411-2-081:2022 Par cular requirements for automa c and semi-automa c laboratory equipment for analysis and other purposes. Product Safety IEC 61010-2-101:2018 Safety requirements for electrical B EN 61010-2-101:2022 equipment for measurement, control DIN EN 61010-2-101:2023 and laboratory use -Part 2-101: VDE 0411-2-101:2023 Par cular requirements for in vitro diagnos c (IVD) medical equipment. Product Safety IEC 61010-2-201:2017 Safety requirements for electrical B EN 61010-2-201:2018 equipment for measurement, control DIN EN IEC 61010-2-201:2020 and laboratory use -Part 2-201: VDE 0411-2-201:2020 Par cular requirements for control equipment Product Safety IEC 61347-1:2017 Lamp controlgear -Part 1: General and A EN 61347-1/A1:2021 safety requirements. DIN EN 61347-1 :2021 VDE 0712-30 :2021 Product Safety IEC 61347-2-13:2016 Lamp controlgear -Part 2-13: Par cular A EN 61347-2-13/A1:2017 requirements for d.c. or a.c. supplied DIN EN 61347-13:2017 electronic controlgear for LED modules. VDE 0712-43:2017 Product Safety IEC 61439-1:2020 Low-voltage switchgear and controlgear A EN IEC 61439-1/AC:2023 assemblies -Part 1: General rules. DIN EN 61439-1:2021 VDE 0660-600-1:2021 Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 61558-1:2017 Safety of power transformers, power A,B EN IEC 61558-1:2019 supplies, reactors and similar products DIN EN IEC 61558-1:2019 Part 1: General requirements and tests. VDE 0570-1:2019 Product Safety IEC 61558-2-1:2021 Safety of power transformers, power A,B IEC 61558-2-1:2007 supplies, reactors and similar products EN 61558-2-1:2007 Part 2-1: Par cular requirements and DIN EN 61558-2-1:2007 tests for separa ng transformers and VDE 0570-2-1:2007 power supplies incorpora ng separa ng transformers for general applica ons. Product Safety IEC 61558-2-2:2022 Safety of power transformers, power A,B EN 61558-2-2:2007 supplies, reactors and similar products DIN EN 61558-2-2:2007 Part 2-2: Par cular requirements and VDE 0570-2-2:2007 tests for control transformers and power supplies incorpora ng control transformers. Product Safety IEC 61558-2-4:2021 Safety of power transformers, power A,B EN 61558-2-4:2009 supply units and similar -Part 2-4: DIN EN 61558-2-4:2009 Par cular requirements for isola ng VDE 0570-2-4:2009 transformers for general use. Product Safety IEC 61558-2-6:2021 Safety of power transformers, power A,B EN 61558-2-6:2009 supply units and similar -Part 2-6: DIN EN 61558-2-6:2010 Par cular requirements for safety VDE 0570-2-6:2010 isola ng transformers for general use. Product Safety IEC 61558-2-7:2023 Safety of power transformers, power A,B EN 61558-2-7:2007 supplies, reactors and similar products DIN EN 61558-2-7:2008 Part 2-7: Par cular requirements and VDE 0570-2-7:2008 tests for transformers and power supplies for toys. Product Safety IEC 61558-2-16:2021 Safety of power transformers, power A,B EN 61558-2-16:2009 + supply units and similar -Part 2-16: A1:2013 Par cular requirements for safety DIN EN 61558-2-16:2014 isola ng transformers for switch mode VDE 0570-2-16:2014 power supplies. Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 61558-2-17:1997 Safety of power transformers, power supply units and similar -Part 2-17: Par cular requirements for safety isola ng transformers for switch mode power supplies. B Product Safety IEC 61800-5-1:2022 Adjustable speed electrical power drive A EN 61800-5-1:2007 + systems -Part 5-1: Safety requirements A11:2021 -Electrical, thermal and energy DIN EN 61800-5 1:2007+A11:2021 VDE 0160-105-1+A11:2021 Product Safety IEC 61851-1:2017 Electrical vehicle conduc ve charging A EN IEC 61851-1/AC:2023 system -Part 1: General requirements. DIN EN 61851-1:2019 VDE 0122-1: 2019 EN 61851-1:2011 Product Safety Divided 2standard Electric vehicle conduc ve charging system – Part 21-1: Electric vehicle on- A IEC 61851-21-1:2017 board charger EMC requirements for EN 61851-21-1/AC:2017 conduc ve connec on to an AC/DC DIN EN 61851-21-1:2018 supply VDE 0122-2-11: 2018 Product Safety Divided 2standard Electric vehicle conduc ve charging A IEC 61851-21-2:2018 system – Part 21-2: Electric vehicle EN IEC 61851-21-2:2021 requirements for conduc ve connec on DIN EN 61851-21-2:2021 to an AC/DC supply – EMC VDE 0122-2-1-2: 2021 requirements for o.-board electric vehicle charging systems Product Safety IEC 61851-22:2012 Electrical equipment of electric road A EN 61851-22:2002 vehicles -Electric vehicles conduc ve DIN EN 61851-22:2002 charging system -Part 2-2: AC electric VDE 0121-2-2:2002 vehicle charging sta on. Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 61951-1:2023 Secondary cells and ba eries containing B EN 61951-1/A1:2023 alkaline or other non-acid electrolytes DIN EN 61951-1:2017 Portable sealed rechargeable single VDE 0510-53:2017 cells -Part 1: Nickel-cadmium. Product Safety IEC 61951-2:2022 Secondary cells and ba eries containing B EN 61951-2/A1:2022 alkaline or other non acid electrolytes DIN EN 61951-2:2023 Secondary sealed cells and ba eries for VDE 0510-31:2023 portable applica ons -Part 2: Nickel metal hydride Product Safety IEC 61960:2011 EN 61960:2011 DIN EN 61960:2012 There are 61960-3 IEC 61960-3:2017 EN 61960-3:2017 DIN EN 61960-3:2017 VDE 0510-3:2017 Secondary cells and ba eries containing alkaline or other non-acid electrolytes -Secondary lithium cells and ba eries for portable applica ons. B Product Safety IEC 62031:2018 LED modules for general ligh ng A EN 62031/A1:2021 Safety speci.ca ons. DIN EN IEC 62031:2020 VDE 0715-5:2020 Product Safety IEC 62040-1:2022 Uninterrup ble Power Systems (UPS) A EN IEC 62040-1/A1:2023 Part 1: General and safety requirements DIN EN IEC 62040 for UPS. 1/A1:2023 VDE 0558-510/A11: 2021 Product Safety IEC 62133-1:2017 Secondary cells and ba eries containing B EN 62133-1:2017 alkaline or other non-acid electrolytes DIN EN 62133-1 :2017 Safety requirements for portable sealed VDE 0510-81:2017-11:2017 secondary cells, and for ba eries made from them, for use in portable applica ons -Part 1: Nickel systems. Product Safety IEC 62133-2: 2021 Secondary cells and ba eries containing B EN 62133-2/A1:2021 alkaline or other non-acid electrolytes DIN EN 62133-2:2022 Safety requirements for portable sealed VDE 0510-82:2022 secondary cells, and for ba eries made Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons from them, for use in portable applica ons -Part 2: Lithium systems. Product Safety IEC 62281:2023 Safety of primary and secondary lithium B EN IEC 62281/A2:2023 cells and ba eries during transport. DIN EN IEC 62281:2024 VDE 0509-6:2024 Product Safety IEC 62301:2011 Household electrical appliances -Measurement of standby power. B Product Safety EN 50178:1997 DIN EN 50178 VDE 0160:1998 Electronic equipment for use in power installa ons. A Product Safety IEC 62109-1:2010 Safety of power converters for use in A EN 61109-1:2010 photovoltaic power systems -Part 1: DIN EN 62109-1:2011 General requirements. VDE 0126-14-1:2011 Product Safety IEC 62109-2:2011 Safety of power converters for use in A EN 62109-2:2011 photovoltaic power systems -Part 2: DIN EN 62109-2:2012 Par cular requirements for inverters. VDE 0126-14-2:2012 Product Safety IEC 62196-1:2022 Plug, socket-outlets, vehicle couplers A EN IEC 62196-1: 2022 and vehicle inlets -Conduc ve charging EN 62196-1:2022 of electrical vehicles -Part 1: Charging DIN EN 62196-1:2023 of electrical vehicles up to 250 A a.c. or VDE 0623-5:2023 400 A d.c. Product Safety IEC 62262:2021 Degrees of protec on provided by A EN 62262/A1:2021 enclosures for electrical equipment DIN EN 62262 :2022 against external mechanical impacts (IK VDE 0470-100 :2022 code) Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 62301: 2011 Household electrical appliances -Measurement of standby power. A Product Safety IEC 62304:2006 + A1:2015 EN 62304:2006 + A1:2015 DIN EN 62304: 2016 VDE 0750-101:2016 Medical Device so ware -So ware life cycle processes. A Product Safety IEC 62366:2007 EN 62366:2008 DIN EN 62366:2008 VDE 0750-241 Medical devices -Applica on of usability engineering to medical devices. A Product Safety IEC 62366-1:2020 EN 62366-1/A1:2020 DIN EN 62366-1:2021 VDE 0750-241-1:2021 Medical devices -Part 1: Applica on of usability engineering to medical devices. A Product Safety IEC 62368-1:2023 EN IEC 62368-1/A1:2020 DIN EN 62368-1:2021 VDE 0868-1:2021 Audio/Video, Informa on and Communica on Technology Equipment -Part 1: Safety Requirements. A,B Product Safety IEC 62384:2020 EN IEC 62384:2020 DIN EN 62384:2021 VDE 0712-26:2021 DC or AC supplied electronic control gear for LED modules -Performance requirements. A Product Safety IEC 62471:2006 EN 62471:2008 DIN EN 62471:2009 VDE 0837-471:2009 Photobiological safety of lamps and lamp systems. A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 62471-5:2015 EN 62471-5:2015 DIN EN 62471-5:2017 VDE 0837-471-5:2017 Photobiological safety of lamps and lamp systems -Part 5: Image projectors. A Product Safety IEC 62477-1: 2022 EN 62477-1:2023 DIN EN 62477-1/A12:2021 VDE 0558-477-1/A12:2021 Safety requirements for power electronic converter systems and equipment -Part 1: General. A Product Safety IEC 62560:2015 EN 62560/A11:2019 DIN EN 62560:2019 VDE 0715-13:2019 Self-ballasted LED-lamps for general ligh ng services by voltage > 50 V -Safety speci.ca ons. A Product Safety IEC 62660-1:2018 EN IEC 62660-1:2019 DIN EN 62660-1:2020 VDE 0510-33:2020 Secondary lithium-ion cells for the propulsion of electric road vehicles -Part 1: Performance tes ng. B Product Safety ISO 4892-1:2016 EN ISO 4892-1:2016 DIN EN ISO 4892-1:2016 Plas cs -Methods of exposure to laboratory light sources -Part 1: General guidance. A Product Safety ISO 4892-2 AMD1:2021 EN ISO 4892-1/A1:2021 DIN EN ISO 4892-2:2021 Plas cs -Methods of exposure to laboratory light sources -Part 2: Xenonarc lamps. A Product Safety ISO 7779:2018 EN ISO 7779:2018 DIN EN ISO 7779:2019 Acous cs -Measurement of airborne noise emi ed by informa on technology and telecommunica ons equipment. A Product Safety EN 50564:2011 DIN EN 50564:2011 VDE 0705-2301:2011 Electrical and electronic household and o.ce equipment -Measurement of low power consump on B Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons /reduc ons modi.ca ons of standard) Loca on/ reduc ons Product Safety IEC 62660-2:2018 EN IEC 62660-2:2019 DIN EN 62660-2:2020 VDE 0510-34:2020 Secondary lithium-ion cells for the propulsion of electric road vehicles -Part 2: Reliability and abuse tes ng. B Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Environmental IEC 60068-2-1:2007 Environmental tes ng -Part 2-1: Tests A,B Tes ng EN 60068-2-1:2007 -Test A: Cold. DIN EN 60068-2-1:2008 VDE 0468-2-1:2008 Environmental IEC 60068-2-2:2007 Environmental tes ng -Part 2-2: Tests A,B Tes ng EN 60068-2-2:2007 DIN EN 60068-2-2:2008 VDE 0468-2-2:2008 -Test B: Dry heat. Environmental IEC 60068-2-6:2007 Environmental tes ng -Part 2-6: Tests A,B Tes ng EN 60068-2-6:2008 -Test Fc: Vibra on (sinusoidal). DIN EN 60068-2-6:2008 VDE 0468-2-6:2008 Environmental IEC 60068-2-11:2021 Environmental tes ng -Part 2: Tests A Tes ng EN 60068-2-11:2021 Test Ka: Salt mist. DIN EN 60068-2-11:2020 VDE 0468-2-11:2022 Environmental IEC 60068-2-14:2023 Environmental tes ng -Part 2: Tests A, Tes ng EN 60068-2-14:2023 test N: Change of temperature. B DIN EN 60068-2-14:2010 (Limita on: Excluding test Nc) VDE 0468-2-14:2010 Environmental IEC 60068-2-27:2008 Basic environmental tes ng A, Tes ng EN 60068-2-27:2009 procedures -Part 2: Tests -test Ea and B DIN EN 60068-2-27:2010 guidance: Shock. VDE 0468-2-27:2010 Environmental Tes ng IEC 60068-2-30:2005 EN 60068-2-30:2005 DIN EN 60068-2-30:2006 Environmental tes ng -Part 2-30: Tests -Test Db: Damp heat, cyclic (12 h+ 12 h cycle). A,B Environmental IEC 60068-2-31: 2008-05 Environmental tes ng -Part 2-31: A,B Tes ng EN 60068-2-31: 2008-09 Tests -Test Ec: Rough handling shocks, DIN EN 60068-2-31:2009-04 primarily for equipment-type VDE 0468-2-31:2009 specimens Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Environmental IEC 60068-2-52:2017 Environmental tes ng -Part 2: Tests A Tes ng EN 60068-2-52:2018 Test Kb: Salt mist, cyclic (sodium DIN EN 60068-2-52:2018 chloride solu on). VDE 0468-2-52:2018 Environmental IEC 60068-2-64:2019 Environmental tes ng -Part 2-64: A, Tes ng EN 60068-2-64/A1:2019 Tests -Test Fh: Vibra on, broadband B DIN EN 60068-2-64:2020 random and guidance. VDE 0468-2-64:2020 Environmental IEC 60068-2-78:2012 Environmental tes ng -Part 2-78: B tes ng EN 60068-2-78:2013 Tests -Test Cab: Damp heat, steady DIN EN 60068-2-78:2014 state VDE 0468-2-78:2014 Environmental IEC 61373:2010 Railway applica ons -Rolling stock B tes ng EN 61373:2010 equipment -Shock and vibra on tests DIN EN 61373:2011 VDE 0115-106:2011 Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Low Voltage IEC 60947-1:2020 EN IEC 60947-1:2021 DIN EN IEC 60947-1:2022 VDE 0660-100:2022 Low-voltage switchgear and controlgear -Part 1: General rules. A Low Voltage IEC 60947-2:2019 EN 60947-2/A1:2020 DIN EN 60947-2:2020 VDE 0660-101:2020 Low-voltage switchgear and controlgear -Part 2: Circuit-breakers. A Low Voltage IEC 60947-4-1:2023 EN IEC 60947-4-1:2021 DIN EN IEC 60947-4-1:2020 VDE 0660-102:2020 Low-voltage switchgear and controlgear -Part 4-2: Contactors and motor-starters -AC semiconductor motor controllers and starters. A Low Voltage IEC 60947-4-2:2020 EN IEC 60947-4-2:2023 DIN EN 60947-4-2:2024 VDE 0660-117:2024 Low-voltage switchgear and controlgear -Part 4-2: Contactors and motor-starters -AC semiconductor motor controllers and starters. A Low Voltage IEC 60947-4-3:2020 EN 60947-4-3:2014 DIN EN 60947-4-3:2015 VDE 0660-109:2015 Low-voltage switchgear and controlgear -Part 4-3: Contactors and motor-starters -AC semiconductor controllers and contactors for non-motor loads. A Low Voltage IEC 60947-5-1:2024 EN 60947-5-1/A1:2020 DIN EN 60947-5-1:2018 VDE 0660-200:2018 Low-voltage switchgear and controlgear -Part 5-1: Control circuit devices and switching elements -Electromechanical control circuit devices A Low Voltage IEC 60947-5-5:2016 EN 60947-5-5/A2:2017 DIN EN 60947-5-5:2017 VDE 0660-210:2017 Low-voltage switchgear and controlgear -Part 5-5: Control circuit devices and switching elements -Electrical emergency stop device with mechanical latching func on. A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Low Voltage IEC 60947-5-8:2020 EN IEC 60947-5-8:2021 DIN EN 60947-5-8:2021 VDE 0660-215:2021 Low-voltage switchgear and controlgear -Part 5-8: Control circuit devices and switching elements Three-posi on enabling switches. A Low Voltage IEC 60947-7-1:2009 EN 60947-7-1:2009 DIN EN 60947-7-1:2010 VDE 0611-1:2010 Low-voltage switchgear and controlgear -Part 7-1: Ancillary equipment -Terminal blocks for copper conductors. A Low Voltage IEC 60947-7-2:2009 EN 60947-7-2:2009 DIN EN 60947-7-2:2010 VDE 0611-3:2010 Low-voltage switchgear and controlgear -Part 7-2: Ancillary equipment -Protec ve conductor terminal blocks for copper conductors. A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Ba ery UN Regula on No.100 Revision 2: 2013 + A1:2014 + A2:2016 A3:2016+A4:2019 + A5:2021 UN Regula on No. 100 -Uniform Provisions concerning the Approval of Vehicles with regard to speci.c Requirements for the Electric Power Train. (Limita on: Excluding Annex 7: Determin on of hydrogen emissions during the charge, procedures of the REESS Annex 8E-Fire resistance) B Ba ery UN Regula on No.100 Revision 3: 2022 + A1:2022 + A2:2023 Uniform provisions concerning the approval of vehicles with regard to speci.c requirements for the electric power train (Limita on: Excluding Annex 7: Determin on of hydrogen emissions during the charge, procedures of the REESS Annex 8E-Fire resistance) B Ba ery INMETRO Regula on No. 199:04.06.2015 INMETRO Regula on No. 199: Adjustments and explana ons to leadacid ba eries for motor-vehicles regula on (Transla on). B Ba ery INMETRO Regula on No. 239:13.07.2012 INMETRO Regula on No. 239: Quality technical regula on for lead-acid ba eries for automo ve vehicles and motorcycles (Transla on). B Ba ery INMETRO Regula on No. 299:13.07.2012 INMETRO Regula on No. 299: Leadacid ba eries for automo ve vehicles (Transla on). B Ba ery INMETRO Regula on No.301:20.05.2014 INMETRO Regula on No. 301: Conformity assessment requirements for automo ve components (Transla on). B Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Ba ery ABNT NBR 15940:22.09.2013 ABNT NBR 15940: Ba eries lead-acid for use in automachine vehicles of four or more wheels -Speci.ca on and test methods (Original in Portuguese language). B Ba ery ABNT NBR 15940:2016-08-23 Lead-acid ba eries for use in vehicles of four or more wheels -Speci.ca on and test B Ba ery ABNT NBR 15940: Fourth Edi on 27.11.2019 ABNT NBR 15940: Lead-acid ba eries for use in automo ve vehicles of four or more-wheel motor road vehicles -Speci.ca on and test methods (Original in Portuguese language). B Ba ery ABNT NBR 15941:03.11.2012 ABNT NBR 15941: Ba eries lead-acid for motorcycles, quadricycle and tricycles -Speci.ca on and test methods (Original in Portuguese language). B Ba ery ABNT NBR 15941: Third Edi on 26.04.2019 Lead-acid ba eries for motorcycles, quadricycle and tricycles - Speci.ca on and test methods (Original in Portuguese language). B Ba ery ORDINACE NO. 145:28.03.2022 INMETRO ORDINANCE NO. 145, OF MARCH 28, 2022: Approves the Quality Technical Regula ons and the Conformity Assessment Requirements for Automo ve Components -Consolidated. (Transla on). B Ba ery UN38.3 Rev 8 Manual of Tests and Criteria B Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Ba ery UN Regula on No. 136: 2016 + A1: 2023 Uniform provisions concerning the approval of vehicles of category L with regard to speci.c requirements for the electric power train B Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Telecommunica on TBR 21 January 1998 Access and Terminals (AT); A achment requirements for pan-European approval for connec on to the analogue Public Switched Telephone Networks (PSTNs) of TE (excluding TE suppor ng the voice telephony service) in which network addressing, if provided, is by means of Dual Tone Mul Frequency (DTMF) signalling. A Telecommunica on ES 203 021-1 August 2005 Harmonized basic a achment requirements for Terminals for connec on to analogue interfaces of the Telephone Networks; Update of the technical contents of TBR 021, EN 301 437, TBR 015, TBR 017 Part 1: General aspects. A Telecommunica on ES 203 021-2 January 2006 Harmonized basic a achment requirements for Terminals for connec on to analogue interfaces of the Telephone Networks; Update of the technical contents of TBR 021, EN 301 437, TBR 015, TBR 017 Part 2: Basic transmission and protec on of the network of harm. A Telecommunica on ES 203 021-3 January 2006 Harmonized basic a achment requirements for Terminals for connec on to analogue interfaces of the Telephone Networks; Update of the technical contents of TBR 021, EN 301 437, TBR 015, TBR 017 Part 3: Basic Interworking with the Public Telephone Networks. A Telecommunica on EN 301 437 June 1999 Terminal Equipment (TE); A achment requirements for pan-European approval for connec on to the analogue Public Switched Telephone Networks (PSTNs) of TE suppor ng A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons the voice telephony service in which network addressing, if provided, is by means of Dual Tone Mul Frequency (DTMF) signalling. Telecommunica on ETSI EG 201 120 January 1998 Public Switched Telephone Network (PSTN); Method of ra ng terminal equipment so that it can be connected in series and/or in parallel to a Network Termina on Point (NTP). A Telecommunica on ETSI EG 201 121 February 2000 A guide to the applica on of TBR21 A Telecommunica on AS/CA S002:2015 February 2015 Analogue interworking and noninterference requirements for Customer Equipment for connec on to the Public Switched Telephone Network. A Telecommunica on TIA-968-B August 2009 + Addendum 1 June 2012 + Addendum 2 January 2015 + Addendum 3 March 2016 Telecommunica ons Telephone Terminal Equipment Technical Requirements for Connec on of Terminal Equipment to the Telephone Network A Telecommunica on CS-03 Part I Issue 9, Amendment 5 March 2016 Requirements for Terminal Equipment and Related Access Arrangement Intended for Direct Connec on to Analogue Wireline Facili es. A Telecommunica on ETSI ES 201 187 March 1999 2-wire analogue voice band interfaces; Loop Disconnect (LD) dialling speci.c requirements. A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Telecommunica on ETSI ES 201 729 February 2000 Public Switched Telephone Network (PSTN); 2-wire analogue voice band switched interfaces; Timed break recall (register recall);Speci.c requirements for terminals A Telecommunica on IMDA TS PSTN Issue 1, October 2016 Technical Speci.ca on for Terminal Equipment connec ng to the Public Switched Telephone Network (PSTN) A Telecommunica on HKTA 2011 May 2010 Network Connec on Speci.ca on for Connec on of Customer Premises Equipment (CPE) to Direct Exchange Lines (DEL) of the Public Switched Telephone Network (PSTN) in Hong Kong. A Telecommunica on SKMM MTSFB TC T001:2013 January 2013 Speci.ca on for Terminal Equipment Connec ng to The Public Switched Telephone Network (PSTN) A Telecommunica on Wi-Fi WPA2 Version 1.17 Wi-Fi CERTIFIED WPA2™ Test Plan A Telecommunica on Wi-Fi IEEE 802.11n 2.21 Wi-Fi CERTIFIED™ n Test Plan A Telecommunica on Wi-Fi Mul media Version 2.3 WMM System Interoperability Test Plan with Test Engine. A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Telecommunica on Wi-Fi WMM Power Save Version 2.1.6 WMM Power Save System Interoperability Test Plan. A Telecommunica on Wi-Fi Protected Setup Version 2.0.22 and 2.0.24 Wi-Fi Protected Setup Test Plan A Telecommunica on Wi-Fi Direct Version 1.10 Wi-Fi CERTIFIED Wi-Fi Direct® Test Plan A Telecommunica on Wi-Fi Miracast Version 2.8 Wi-Fi CERTIFIED Miracast™ Test Plan A Telecommunica on Wi-Fi CERTIFIED ac Version 2.8 Wi-Fi CERTIFIED ac Interoperability Test Plan A Telecommunica on Wi-Fi CERTIFIED Protected Management Frames Version 1.8 Wi-Fi CERTIFIED Protected Management Frames System Interoperability Test Plan A Telecommunica on Wi-Fi CERTIFIED Passpoint Release 2 and Release 3 Version 3.2 Wi-Fi CERTIFIED Passpoint (Release 2) Interoperability Test Plan A Telecommunica on Wi-Fi CERTIFIED TDLS Version 1.0.2 Wi-Fi CERTIFIED TDLS System Interoperability Test Plan A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Telecommunica on Wi-Fi Aware™ Version 4.0 Wi-Fi CERTIFIED Wi-Fi Aware™ Test Plan A Telecommunica on Wi-Fi Agile Mul band™ Version 1.4 Wi-Fi CERTIFIED Agile Mul band Test Plan A Telecommunica on Wi-Fi CERTIFIED 6™ Version 2.2 Wi-Fi CERTIFIED 6 Test Plan A Telecommunica on Wi-Fi CERTIFIED Loca on Version 2.1 Wi-Fi CERTIFIED Loca on Test Plan A Telecommunica on Wi-Fi CERTIFIED Easy Connect Version 3.0 Wi-Fi CERTIFIED Easy Connect Test Plan Note: Now this version 1.0 is expired, but we have plan to do quali.ca on in early next year by new version (2.0). A Telecommunica on WPA3 Version 3.3 and 3.4 Wi-Fi CERTIFIED WPA3 Test Plan A Telecommunica on Enhanced Open Version 1.4 Wi-Fi CERTIFIED Enhanced Open Test Plan A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Telecommunica on Key Reinstalla on Vulnerability Detec on Version 2.7 "Security Vulnerability Detec on Key Reinstalla on Vulnerability Detec on Test Plan" A Telecommunica on Fragment and Forge Vulnerability Detec on Version 1.2 "Security Vulnerability Detec on Fragment and Forge Vulnerability Detec on Test Plan" A Telecommunica on Wi-Fi CERTIFIED HaLow™ Version 1.0 Wi-Fi CERTIFIED HaLow Test Plan A Telecommunica on Wi-SUN MAC Conformance Test Suite Speci.ca on for Echonet Lite 1v06 Wi-SUN MAC Conformance Test Suite Speci.ca on for Echonet Lite A Telecommunica on Wi-SUN Echonet Pro.le Interface Conformance 1v10 Wi-SUN Interface Conformance Test Suite Speci.ca on for Echonet Pro.le A Telecommunica on Wi-SUN Echonet Pro.le interoperability 1v05 Wi-SUN Echonet Pro.le Interoperability Test Suite Speci.ca on for Echonet Lite A Telecommunica on Wi-SUN MAC Conformance Test Suite Speci.ca on for Single-hop HAN 1v02 Wi-SUN Echonet Pro.le MAC Conformance Test Suite Speci.ca on -Amendment on Single-hop HAN A Telecommunica on Wi-SUN Echonet Pro.le Interface Conformance Test Speci.ca on for Single-hop HAN 1v03 Wi-SUN Echonet Pro.le Interface Conformance Test Suite Speci.ca on -Amendment on Single-hop HAN A Department Standard / in house procedure / Version Title of standard or in house procedure (devia ons / modi.ca ons of standard) Loca on/ reduc ons Telecommunica on Wi-SUN Echonet Pro.le Interoperability Test Speci.ca on for Single-hop HAN 1v03 Wi-SUN Echonet Pro.le Interoperability Test Speci.ca on -Amendment on Single-hop HAN A Telecommunica on Wi-SUN MAC Conformance Test Suite Speci.ca on for Extended HAN 1V01 Wi-SUN Echonet Pro.le MAC Conformance Test Suite Speci.ca on -Amendment for Extended HAN A Telecommunica on Wi-SUN Echonet Pro.le Interface Conformance Test Speci.ca on for HAN extension stage 2 1v01 Wi-SUN Echonet Pro.le Interface Conformance Test Suite Speci.ca on -Supplement 2: HAN Extension stage 2 A Telecommunica on Wi-SUN Interoperability Test Speci.ca on for HAN extension stage 2 1v02 Wi-SUN Interoperability Test Speci.ca on for ECHONET Lite -Supplement 2: HAN Extension stage 2 A Telecommunica on Wi-SUN PHY Conformance Test Suite Speci.ca on 1v16 Wi-SUN PHY Conformance Test Suite Speci.ca on A Telecommunica on Wi-SUN PHY Interop Test Suite Speci.ca on 1v06 Wi-SUN PHY Interop Test Suite Speci.ca on A Telecommunica on OpenADR 2.Oa Cer .ca on Test Speci.ca on Version 1.1.2 Test cases for systems implemen ng the OpenADR 2.0a pro.le A Telecommunica on OpenADR 2.0b Cer .ca on Test Speci.ca on Version 1.1.5 Test cases for systems implemen ng the OpenADR 2.0b pro.le A Abbreviations used: AC AC stands for Amending Corrigendum AS/ACIF AUSTRALIA STANDARD/AUSTRALIAN COMMUNICATION INDUSTRY FORUM AS/NZS AUSTRALIA STANDARD/NEW ZEALAND STANDARD Cor Corrigendum CS CANADIAN STANDARD DIN Deutsches Institut für Normung e.V. -German institute for standardization EN EUROPEAN STANDARD ETSI ES European Telecommunications Standards Institute ETSI EG European Telecommunications Standards Institute GUIDE (EG) HAN Health Alert Network (HAN) HKTA HONG KONG TRUSTEE’S ASSOCIATION IEC International Electrotechnical Commission IMDA TS PSTN INFOCOMM MEDIA DEVELOPMENT AUTHORITY (IMDA) Technical Specification Public Switched Telephone Network (PSTN) ISO ISO -International Organization for Standardization MTSFB Malaysian Technical Standards Forum Bhd (MTSFB) OpenADR Open Automated Demand Response (OpenADR) prEN Proposed European Standard SKMM STANDARD KEY MANAGEMENT MODULE TBR Technical Basis for Regulation TC TECHNICAL COMMITTEES TIA Telecommunicatios Industry Association VDE Verband der Elektrotechnik (Association for Electrical, Electronic & Information Technologies) Wi-Fi wireless fidelity Wi-SUN PHY Smart Utility Networks (SUN) Physical Layer (PHY) Wi-SUN MAC Smart Utility Networks (SUN) Media Access Control (MAC) WPA Wi-Fi Protected Access
Equipment for general lighting purposes - EMC immunity requirements
Electric and electronic equipment for residential, commercial and light-industrial environments - Radioelectric disturbances measurement - Emission; EN 61000-6-3; IEC 61000-6-3; EN IEC 61000-6-3; EN 61000-6-3:2007; EN 61000-6-3:2007/A1:2011; IEC 61000-6-3:2006; IEC 61000-6-3:2006/A1:2010;
Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system; EN 41003;
