00.98 Proposal for new project abandoned Mar 4, 2021
CEN
CEN/TC 295 Residential solid fuel burning appliances
European Norm
This part 2-6 of a European Standard series is applicable to space heaters, inset appliances and cookers fired
by wood pellets, mechanically fed up to 50 kW nominal heat output. These appliances typically use auxiliary
energy which is measured in this standard as well.
For inset appliances and especially their testing additional information may be necessarry from FprEN 16510-
2-2.
Non mechanically fed appliances burning solid mineral fuels, peat briquettes and natural or manufactured
wood logs are not included in this European Standard, but are covered by FprEN 16510-2-1 to FprEN 16510-
2-5.
NOTE These appliances may have an integral fuel hopper or be combined with an external fuel hopper.
This European Standard shall be used in conjunction with Part 1 of EN 16510 series of European Standards.
The appliances covered by this part 2-6 provide heat into the space where they are installed. They may be
operated with either natural draught or fan-assisted combustion air. Where fitted with a boiler, they can also
provide domestic hot water and/or central heating. These appliances burn wood pellets only, in accordance
with the appliance manufacturer's instructions. They only operate with the firedoors closed.
NOTE A fan-assisted appliance does still operate under negative pressure in the flue gas system
This European Standard specifies requirements relating to the design, manufacture, construction, safety and
performance (efficiency and emissions), instructions and marking together with associated test methods and
test fuels.
This European Standard is not applicable to appliances
‒ with boiler intended for water systems having water temperatures above 110°C and 3 bar and
‒ with boiler intendend for water systems having direct contact with sanitary hot water,
‒ intended to be used with a pure horizontal exhaust (through the building wall),
‒ with flue gas condensation in the appliance,
‒ switching on / off for part load operation.
Legislation related to this standard
Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products
ABANDON
prEN 16510-2-6
00.98
Proposal for new project abandoned
Mar 4, 2021