prEN 1492-1 rev

Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use prEN 1492-1 rev

General information

00.60 Close of review   Apr 13, 2023

CEN

CEN/TC 168 Chains, ropes, webbing, slings and accessories - Safety

European Norm

Scope

This European Standard specifies the requirements related to safety, including methods of rating and testing single-, two-, three-, four-leg and endless sewn flat woven webbing slings, with or without fittings, made of polyamide, polyester and polypropylene man-made fibre webbing in the width range of 25 mm to 450 mm inclusive.
The flat woven webbing slings covered by this Part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or working load limits specified. Lifting operations not covered by this standard would include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply.
Flat woven webbing slings conforming to this European Standard are suitable for use and storage in the following temperature ranges:
a) polyester and polyamide -40°C to 100°C,
b) polypropylene -40°C to 80°C
This European Standard does not apply to the types of webbing sling indicated below:
a) slings such as bag slings, nets (consisting of several crossed webbings stitched together), ‘adjustable’ slings (containing, for example, intermediate buckles stitched along the webbing), etc.;
b) slings made from webbing woven from monofilament yarns;
c) slings designed for pre-slinging and intended not to be re-used;
This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of flat woven webbing slings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative.

Related legislation

Legislation related to this standard

2006/42/EC

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

Life cycle

PREVIOUSLY

PUBLISHED
EN 1492-1:2000+A1:2008

NOW

IN_DEVELOPMENT
prEN 1492-1 rev
00.60 Close of review
Apr 13, 2023