prEN 14492-2

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

Publication date:   Aug 20, 2026

Scope

This document is applicable to the design, information for use, maintenance and testing of power driven hoists, compact or open construction, with or without trolleys for which the prime mover is an electric, hydraulic or pneumatic motor. They are designed for the lifting and lowering of loads that are suspended on hooks or other load lifting attachments. Hoists can be used either in cranes, in other machines, e.g. rail dependent storage and retrieval equipment, monorail conveyors or by itself.
This document is applicable to the following types of hoists and applications:
— rope hoists;
— chain hoists;
— belt hoists;
— NGL building hoists;
— winches used for lifting operation;
— hoists designed for holding stationary loads above persons;
— hoists designed for high risk applications.
This document does not apply to belt hoists with steel belts as hoisting media.
This document does not apply to builders’ hoists for transportation of goods having a guided platform or having a guided load carrying device.
This document is not applicable to the following hazards:
— this document does not cover hazards related to the lifting of persons.
This document does not specify additional requirements for hazards related to the use of hoists in explosive atmospheres in underground mines.
This document does not address the hazards related to autonomous operation and use of self-evolving behaviour of the power driven hoists.
The significant hazards covered by this document are identified in Annex H.
This document is not applicable to power driven hoists manufactured before the date of its publication.

Related legislation

Legislation related to this standard