prEN 12457-2

Granular waste materials, sludges, soil, soil-like materials and sediments - Leaching - Compliance test for leaching - Part 2: One-stage batch test at a liquid-to-solid ratio of 10L/kg for materials with particle size below 4 mm (with or without size reduction) prEN 12457-2

Publication date:   Jul 9, 2026

General information

40.20   DIS ballot initiated: 12 weeks   Jul 9, 2026

CEN

CEN/TC 444 Environmental characterization of solid matrices

European Norm

13.030.20   Liquid wastes. Sludge

Buying

Draft

Language in which you want to receive the document.

Scope

This document in the series specifies a compliance test providing information on leaching of granular waste materials, sludges, soil, soil-like materials and sediments under the experimental conditions specified hereafter, and particularly a liquid to solid ratio of 10 L/kg dry matter. It applies to materials which have a particle size below 4 mm without or with size reduction.
This document has been developed to investigate the leaching of inorganic and non-volatile organic substances from granular waste materials, sludges, soil, soil-like materials and sediments. It does not take into account the consequences of microbiological processes in organic degradable materials.
The test procedure specified in this document produces an eluate which is subsequently characterized physically and chemically according to appropriate standard methods. This document includes two different procedures for eluate preparation prior to analysis, one procedure for non-volatile organic substances, inorganic substances and DOC and one for inorganic substances and DOC. When assessing only the leaching of inorganic substances and DOC, certain precautions are needed when assessing the leaching of organic substances can in some cases be omitted.
This procedure cannot be applied to materials with a water content or such a water affinity that a good mixing of the solid with the predetermined quantity of liquid is not achievable.
This procedure does not apply to materials reacting with the leachant, leading, for example, to excessive gas emission, a solidifying effect or an excessive heat release. In that case, the material can be wetted prior to carrying out the leaching test.
This test cannot be used alone to determine the leaching behaviour of granular waste materials, sludges, soil, soil-like materials and sediments, as specified in EN 12920.
This document does not address issues related to health and safety.

Related legislation

Legislation related to this standard

99/31/EC

Landfill of waste

Life cycle

PREVIOUSLY

PUBLISHED
EN 12457-2:2002

NOW

IN_DEVELOPMENT
prEN 12457-2
40.20 DIS ballot initiated: 12 weeks
Jul 9, 2026




Access Genorma App Everywhere

Get fast and easy access to top European and International standards (EN, ISO, IEC) via your mobile phone, tablet or the web.