90.93 Standard confirmed Jul 13, 2023
ISO
ISO/TC 135/SC 9 Acoustic emission testing
International Standard
19.100 Non-destructive testing
This International Standard specifies a method for the secondary calibration of acoustic emission sensors as
receivers of elastic waves at the surface of a solid medium. The International Standard is applicable to laboratory
tertiary standard sensors and acoustic emission applications sensors.
The secondary calibration yields the frequency response of a sensor to waves of a type normally encountered in
acoustic emission work, namely Rayleigh waves. The source producing the signal used for the calibration is
mounted on the same surface of a test block as the sensor under test (SUT). The sensitivity of the sensor is
determined for excitation within the range of 100 kHz to 1 MHz. Sensitivity values are usually determined at
frequencies approximately 10 kHz apart. The units of the calibration are volts per unit of mechanical input
(displacement, velocity or acceleration).
PUBLISHED
ISO 12714:1999
90.93
Standard confirmed
Jul 13, 2023
ABANDON
ISO/NP 12714