90.93 Standard confirmed Mar 30, 2023
ISO
ISO/TC 67/SC 3 Drilling and completion fluids, well cements and treatment fluids
International Standard
75.180.10 Exploratory, drilling and extraction equipment
ISO 10414-1:2008 provides standard procedures for determining the following characteristics of water-based drilling fluids: drilling fluid density (mud weight), viscosity and gel strength, filtration, water, oil and solids contents, sand content, methylene blue capacity, pH, alkalinity and lime content, chloride content and total hardness as calcium.
ISO 10414-1:2008 provides additional test methods which may be used for chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate and potassium; determination of shear strength; determination of resistivity; removal of air drill-pipe corrosion; monitoring sampling, inspection and rejection rig-site sampling; calibration and verification of glassware, thermometers, viscometers, retort-kit cup and drilling-fluid balances; permeability-plugging testing at high temperature and high pressure for two types of equipment; and an example of a report form for water-based drilling fluid.
WITHDRAWN
ISO 10414-1:2001
PUBLISHED
ISO 10414-1:2008
90.93
Standard confirmed
Mar 30, 2023