IEC 61000-3-12:2011 ED2

Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase

Publication date:   May 12, 2011

General information

60.60 Standard published   May 12, 2011

IEC

TC 77/SC 77A

International Standard

33.100.10   Emission

Buying

  Published

PDF - €229.90

  English   French   Spanish  



Buy

Scope

IEC 61000-3-12:2011 deals with the limitation of harmonic currents injected into the public supply system. The limits given in this International Standard are applicable to electrical and electronic equipment with a rated input current exceeding 16 A and up to and including 75 A per phase, intended to be connected to public low-voltage a.c. distribution systems of the following types:<br />
- nominal voltage up to 240 V, single-phase, two or three wires;<br />
- nominal voltage up to 690 V, three-phase, three or four wires;<br />
- nominal frequency 50 Hz or 60 Hz. Other distribution systems are excluded. The limits given in this edition apply to equipment when connected to 230/400 V, 50 Hz systems. This standard applies to equipment intended to be connected to low-voltage systems interfacing with the public supply at the low-voltage level. It does not apply to equipment intended to be connected only to private low-voltage systems interfacing with the public supply only at the medium- or high-voltage level. This standard defines:<br />
a) requirements and emission limits for equipment;<br />
b) methods for type tests and simulations. Tests according to this International Standard are type tests of complete pieces of equipment. Conformity with this standard can also be determined by validated simulations. This second edition cancels and replaces the first edition published in 2004 and constitutes a technical revision. The significant technical changes with respect to the previous edition are:<br />
- the replacement of the reference fundamental current I1 by the reference current Iref for the calculation of emission limits;<br />
- a new added table of current emission limits (Table 5);<br />
- a new added annex (Annex A) to define test conditions for some types of equipment;<br />
- Deletion of the former Annexes B (Approximate interpolation formulas) and D (Information on the PWHD factor).

Life cycle

PREVIOUSLY

WITHDRAWN
IEC 61000-3-12:2004 ED1

NOW

PUBLISHED
IEC 61000-3-12:2011 ED2
60.60 Standard published
May 12, 2011

CORRIGENDA / AMENDMENTS

PUBLISHED
IEC 61000-3-12:2011/AMD1:2021 ED2