IEC 60332-3-22:2000 Specifies method of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. The test is intended for type approval testing. The requirements for the selection of cables for testing are given. The flame spread is measured as the extent of damage of the cable sample. This procedure may be used to demonstrate the cable's ability to limit flame spread. Covers category A and relates to cables installed on the test ladder to achieve a nominal total volume of non-metallic material of 7 l/m of test sample. The flame application time is 40 min. The method of mounting uses the front of the ladder, a standard or wide ladder being used for cables having a conductor cross-section greater than 35 mm2 according to the number of test pieces required, and a standard ladder for conductor cross-sections 35 mm2 and smaller. The category is intended for general use where high volumes of non-metallic material are required to be evaluated.
A recommended performance requirement is also given.
It has the status of a horizontal standard in accordance with IEC Guide 104.
WITHDRAWN
IEC TS 60332-3:1992 ED2
WITHDRAWN
IEC 60332-3-22:2000 ED1
99.60
Withdrawal effective
Jul 13, 2018
WITHDRAWN
IEC 60332-3-22:2000/AMD1:2008 ED1
PUBLISHED
IEC 60332-3-22:2018 ED2