EN IEC 63044-5-3:2019

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments

Publication date:   Mar 16, 2020

Scope

IEC 63044-5-3:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.

NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23.

This document specifies EMC requirements for HBES/BACS to be installed in industrial environments, according to the definition given in IEC 61000-6-2.

NOTE Industrial environment covers the office spaces that may be present in industrial premises. Industrial automation systems are outside the scope. This document is applicable (but not limited) to

<ul>
<li>
operator stations and other human–system interface devices,</li>
<li>
devices for management functions,</li>
<li>
control devices, automation stations and application-specific controllers,</li>
<li>
field devices and their interfaces,</li>
<li>
cabling and interconnection of devices,</li>
</ul>
used within a dedicated HBES/BACS network. This publication is to be read in conjunction with <a href="https://webstore.iec.ch/publication/31261">IEC 63044-5-1:2017.

Related legislation

Legislation related to this standard