EN 60695-11-10:1999

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods

Publication date:   Jun 30, 2003

General information

99.60 Withdrawal effective   Jun 25, 2016

CENELEC

CLC/SR 89 Fire hazard testing

European Norm

13.220.40   Ignitability and burning behaviour of materials and products | 29.020   Electrical engineering in general

Buying

  Withdrawn

PDF - €36.30

  Bulgarian  



Buy

Scope

Specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other non-metallic materials, exposed to a small-flame ignition source of 50 W nominal power. These test methods determine the linear burning rate and the afterflame/afterglow times, as well as the damaged length of specimens. Applicable to solid and cellular materials that have an apparent density of not less than 250 kg/m3, determined in accordance with ISO 845. They do not apply to materials that shrink away from applied flame without igniting; ISO 9773 should be used for thin flexible materials. The test methods described provide classification systems which may be used for quality assurance, or the pre-selection of component materials of products. May be used for the pre-selection of a material, providing positive results are obtained at a thickness equal to the smallest thickness used in the application. Has the status of a basic safety application in accordance with Guide 104.

Related legislation

Legislation related to this standard

2006/95/EC

Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)

Harmonized/Supporting
2014/35/EU

Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits

Harmonized/Supporting

Life cycle

PREVIOUSLY

WITHDRAWN
HD 441 S1:1983

WITHDRAWN
EN 60707:1999

NOW

WITHDRAWN
EN 60695-11-10:1999
99.60 Withdrawal effective
Jun 25, 2016

CORRIGENDA / AMENDMENTS

WITHDRAWN
EN 60695-11-10:1999/A1:2003

REVISED BY

PUBLISHED
EN 60695-11-10:2013