60.60 Standard published Jul 17, 2015
CENELEC
CLC/BTTF 132-2 Revision of EN 50156 "Electrical equipment for furnaces and ancillary equipment"
European Norm
27.060.01 Burners and boilers in general
This European Standard applies to the application design and installation of electrical equipment, control circuits and safety-related systems for furnaces which are operated with solid, liquid or gaseous fuels and their ancillary equipment. It specifies requirements to meet the operating conditions of furnaces, to reduce the hazards of combustion and to protect the heated systems from damage e.g. by overheating.
Such furnaces and the electrical equipment may be part by way of example of the following plant:
a) water heating systems;
b) steam boiler installations (steam and hot-water boilers) and heat recovery steam boilers;
NOTE 1 The requirements of this standard apply according to the electrical equipment of electrically heated steam boilers.
NOTE 2 Seagoing vessels and offshore facilities are governed by International Maritime Law and as such are not within the scope of this standard. These requirements may be used for such facilities.
c) warm air heaters;
d) hot-gas heaters;
e) heat exchanger systems;
f) combustion chambers of stationary turbines;
g) as long as no other standard is applicable for combined heat and power stations, we recommend the use of the requirements of this standard;
h) This standard may also be used as reference for electrical equipment requirements for thermo-processing equipment.
The requirements in this standard are not applicable to electrical equipment for:
i) non-electrically heated appliances and burner control systems for household and similar purposes;
j) furnaces using technologies for the direct conversion of heat into electrical energy;
k) combustion chambers of non-stationary prime movers and turbines;
l) central oil supply systems for individual heating appliances;
m) furnaces using solid fuels for heating purposes for household use with a nominal thermal output up to 1 MW;
n) furnaces which are used to heat process fluids and gasses in chemical plant.
This European Standard may be used as a basis for the requirements placed on electrical equipment for furnaces, which are excluded from its field of application.
Legislation related to this standard
Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Harmonized/Supporting
WITHDRAWN
EN 50156-1:2004
PUBLISHED
EN 50156-1:2015
60.60
Standard published
Jul 17, 2015
IN_DEVELOPMENT
EN 50156-1:2024